The RTL8192DU is an older Wifi 4 dual band chip. It comes in two
flavours: single MAC single PHY (like most Realtek Wifi 4 USB devices),
and dual MAC dual PHY.
The single MAC single PHY version is 2T2R and can work either in the
2.4 GHz band or the 5 GHz band.
The dual MAC dual PHY version has two USB interfaces and appears to the
system as two separate 1T1R Wifi devices, one working in the 2.4 GHz
band, the other in the 5 GHz band.
This was tested only with a single MAC single PHY device, mostly in
station mode. The speeds in the 2.4 GHz band with 20 MHz channel width
are similar to the out-of-tree driver: 85/51 megabits/second.
Stefan Lippers-Hollmann tested the speed in the 5 GHz band with 40 MHz
channel width: 173/99 megabits/second.
It was also tested briefly in AP mode. It's emitting beacons and my
phone can connect to it.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/5f2da7ee-876a-42fc-8fec-ec5386fa8c26@gmail.com
This allows the drivers to declare the structs rtl_hal_cfg, rtl_hal_ops,
and rtl_hal_usbint_cfg as const.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/1b29994f-3d07-4297-875d-57c3a87a1ec6@gmail.com
These contain functions related to the dynamic mechanism, which runs
every two seconds to adjust to changes in the environment.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/a010ed6d-efb0-456d-bd4a-dfc6da23e7aa@gmail.com
fw.c contains a function for loading the firmware.
led.c contains a function for controlling the LED.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/a52b8907-267c-4811-90ca-5eb852a2aa09@gmail.com
These contain one RF configuration function and some functions related
to dual MAC operation.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/36258d72-11fd-4f70-84c6-782972f706ed@gmail.com
These contain mostly the calibration and channel switching routines
for RTL8192DU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/299a5ab7-46bf-410b-bbeb-e252eeeeb34c@gmail.com
These are needed for the dual MAC version of RTL8192DU.
The two mutexes are used to avoid concurrent access to the hardware
from the two USB interfaces.
The two arrays are filled by one interface during LC calibration and
accessed by the other interface during channel switching.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/d1bf581b-de41-4d09-bf56-768c2fc29dd3@gmail.com
The driver overrides the NUMA node id of the device regardless of
whether it knows its correct value (often setting it to -1 even though
the node id is advertised in 'struct device'). This can lead to
suboptimal configurations.
This patch fixes this behavior and makes the shared memory allocation
functions use the NUMA node id advertised by the underlying device.
Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/20240528170912.1204417-1-shayagr@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2024-05-28 (e1000e, i40e, ice) [part]
This series includes a variety of fixes that have been accumulating on the
Intel Wired LAN dev-queue.
Hui Wang provides a fix for suspend/resume on e1000e due to failure
to correctly setup the SMBUS in enable_ulp().
Thinh Tran provides a fix for EEH I/O suspend/resume on i40e to
ensure that I/O operations can continue after a resume. To avoid duplicate
code, the common logic is factored out of i40e_suspend and i40e_resume.
Paul Greenwalt provides a fix to correctly map the 200G PHY types to link
speeds in the ice driver.
Dave Ertman provides a fix correcting devlink parameter unregistration in
the event that the driver loads in safe mode and some of the parameters
were not registered.
====================
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-0-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On module load, the ice driver checks for the lack of a specific PF
capability to determine if it should reduce the number of devlink params
to register. One situation when this test returns true is when the
driver loads in safe mode. The same check is not present on the unload
path when devlink params are unregistered. This results in the driver
triggering a WARN_ON in the kernel devlink code.
The current check and code path uses a reduction in the number of elements
reported in the list of params. This is fragile and not good for future
maintaining.
Change the parameters to be held in two lists, one always registered and
one dependent on the check.
Add a symmetrical check in the unload path so that the correct parameters
are unregistered as well.
Fixes: 109eb29172 ("ice: Add tx_scheduling_layers devlink param")
CC: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 24407a01e5 ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include the mapping of 200G PHY types
to link speed. As a result the driver is returning UNKNOWN link speed
when setting 200G ethtool advertised link modes.
To fix this add 200G PHY types to link speed mapping to
ice_get_link_speed_based_on_phy_type().
Fixes: 24407a01e5 ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When EEH events occurs, the callback functions in the i40e, which are
managed by the EEH driver, will completely suspend and resume all IO
operations.
- In the PCI error detected callback, replaced i40e_prep_for_reset()
with i40e_io_suspend(). The change is to fully suspend all I/O
operations
- In the PCI error slot reset callback, replaced pci_enable_device_mem()
with pci_enable_device(). This change enables both I/O and memory of
the device.
- In the PCI error resume callback, replaced i40e_handle_reset_warning()
with i40e_io_resume(). This change allows the system to resume I/O
operations
Fixes: a5f3d2c17b ("powerpc/pseries/pci: Add MSI domains")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-3-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two new functions, i40e_io_suspend() and i40e_io_resume(), have been
introduced. These functions were factored out from the existing
i40e_suspend() and i40e_resume() respectively. This factoring was
done due to concerns about the logic of the I40E_SUSPENSED state, which
caused the device to be unable to recover. The functions are now used
in the EEH handling for device suspend/resume callbacks.
The function i40e_enable_mc_magic_wake() has been moved ahead of
i40e_io_suspend() to ensure it is declared before being used.
Tested-by: Robert Thomas <rob.thomas@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-2-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 861e808602 ("e1000e: move force SMBUS from enable ulp
function to avoid PHY loss issue") introduces a regression on
PCH_MTP_I219_LM18 (PCIID: 0x8086550A). Without the referred commit, the
ethernet works well after suspend and resume, but after applying the
commit, the ethernet couldn't work anymore after the resume and the
dmesg shows that the NIC link changes to 10Mbps (1000Mbps originally):
[ 43.305084] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
Without the commit, the force SMBUS code will not be executed if
"return 0" or "goto out" is executed in the enable_ulp(), and in my
case, the "goto out" is executed since FWSM_FW_VALID is set. But after
applying the commit, the force SMBUS code will be ran unconditionally.
Here move the force SMBUS code back to enable_ulp() and put it
immediately ahead of hw->phy.ops.release(hw), this could allow the
longest settling time as possible for interface in this function and
doesn't change the original code logic.
The issue was found on a Lenovo laptop with the ethernet hw as below:
00:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:550a]
(rev 20).
And this patch is verified (cable plug and unplug, system suspend
and resume) on Lenovo laptops with ethernet hw: [8086:550a],
[8086:550b], [8086:15bb], [8086:15be], [8086:1a1f], [8086:1a1c] and
[8086:0dc7].
Fixes: 861e808602 ("e1000e: move force SMBUS from enable ulp function to avoid PHY loss issue")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-1-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the cache controller compatible and register region descriptions for
SA8775p platform.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240529101534.3166507-2-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Building interconnect driver for Qualcomm SM8350 platform can easily
result in a device hang / reboot because of the resource starvation.
Move this driver to be built-in to prevent such issues during the boot.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-8350-config-v1-2-d6e871236ed4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable support for the GPU Clock Controller for the Qualcomm SM8350
platform. This enables the GPU on Qualcomm SM8350 HDK and other devices
using this SoC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240530-8350-config-v1-1-d6e871236ed4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SHIFTphone 8 (codename otter) is a smartphone based on the QCM6490
SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Link: https://lore.kernel.org/r/20240530-otter-bringup-v3-1-79e7a28c1b08@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The driver should return RMII interface when XMII is running in RMII mode.
Fixes: 0ab7f6bf16 ("net: dsa: microchip: ksz9477: use common xmii function")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Acked-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent change to inet_dump_ifaddr had the function incorrectly iterate
over net rather than tgt_net, resulting in the data coming for the
incorrect network namespace.
Fixes: cdb2f80f1c ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Stéphane Graber <stgraber@stgraber.org>
Closes: https://github.com/lxc/incus/issues/892
Bisected-by: Stéphane Graber <stgraber@stgraber.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Tested-by: Stéphane Graber <stgraber@stgraber.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240528203030.10839-1-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert felix to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/E1sByYA-00EM0y-Jn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No DSA driver makes use of the mac_prepare()/mac_finish() shimmed
operations anymore, so we can remove these.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1sByNx-00ELW1-Vp@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__dst_negative_advice() does not enforce proper RCU rules when
sk->dst_cache must be cleared, leading to possible UAF.
RCU rules are that we must first clear sk->sk_dst_cache,
then call dst_release(old_dst).
Note that sk_dst_reset(sk) is implementing this protocol correctly,
while __dst_negative_advice() uses the wrong order.
Given that ip6_negative_advice() has special logic
against RTF_CACHE, this means each of the three ->negative_advice()
existing methods must perform the sk_dst_reset() themselves.
Note the check against NULL dst is centralized in
__dst_negative_advice(), there is no need to duplicate
it in various callbacks.
Many thanks to Clement Lecigne for tracking this issue.
This old bug became visible after the blamed commit, using UDP sockets.
Fixes: a87cb3e48e ("net: Facility to report route quality of connected sockets")
Reported-by: Clement Lecigne <clecigne@google.com>
Diagnosed-by: Clement Lecigne <clecigne@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240528114353.1794151-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Sverdlin says:
====================
net: ethernet: ti: am65-cpsw-nuss: support stacked switches
Currently an external Ethernet switch connected to a am65-cpsw-nuss CPU
port will not be probed successfully because of_find_net_device_by_node()
will not be able to find the netdev of the CPU port.
It's necessary to populate of_node of the struct device for the
am65-cpsw-nuss ports. DT nodes of the ports are already stored in per-port
private data, but because of some legacy reasons the naming ("phy_node")
was misleading.
====================
Link: https://lore.kernel.org/r/20240528075954.3608118-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename phy_node to port_np to better reflect what it actually is,
because the new phylink API takes netdev node (or DSA port node),
and resolves the phandle internally.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20240528075954.3608118-2-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: fix tcp_poll() races
Flakes in packetdrill tests stressing epoll_wait()
were root caused to bad ordering in tcp_write_err()
Precisely, we have to call sk_error_report() after
tcp_done().
When fixing this issue, we discovered tcp_abort(),
tcp_v4_err() and tcp_v6_err() had similar issues.
Since tcp_reset() has the correct ordering,
first patch takes part of it and creates
tcp_done_with_error() helper.
====================
Link: https://lore.kernel.org/r/20240528125253.1966136-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These functions have races when they:
1) Write sk->sk_err
2) call sk_error_report(sk)
3) call tcp_done(sk)
As described in prior patches in this series:
An smp_wmb() is missing.
We should call tcp_done() before sk_error_report(sk)
to have consistent tcp_poll() results on SMP hosts.
Use tcp_done_with_error() where we centralized the
correct sequence.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240528125253.1966136-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_abort() has the same issue than the one fixed in the prior patch
in tcp_write_err().
In order to get consistent results from tcp_poll(), we must call
sk_error_report() after tcp_done().
We can use tcp_done_with_error() to centralize this logic.
Fixes: c1e64e298b ("net: diag: Support destroying TCP sockets.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240528125253.1966136-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I noticed flakes in a packetdrill test, expecting an epoll_wait()
to return EPOLLERR | EPOLLHUP on a failed connect() attempt,
after multiple SYN retransmits. It sometimes return EPOLLERR only.
The issue is that tcp_write_err():
1) writes an error in sk->sk_err,
2) calls sk_error_report(),
3) then calls tcp_done().
tcp_done() is writing SHUTDOWN_MASK into sk->sk_shutdown,
among other things.
Problem is that the awaken user thread (from 2) sk_error_report())
might call tcp_poll() before tcp_done() has written sk->sk_shutdown.
tcp_poll() only sees a non zero sk->sk_err and returns EPOLLERR.
This patch fixes the issue by making sure to call sk_error_report()
after tcp_done().
tcp_write_err() also lacks an smp_wmb().
We can reuse tcp_done_with_error() to factor out the details,
as Neal suggested.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240528125253.1966136-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_reset() ends with a sequence that is carefuly ordered.
We need to fix [e]poll bugs in the following patches,
it makes sense to use a common helper.
Suggested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240528125253.1966136-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a user provides an invalid netconsole configuration during boot time
(e.g., specifying an invalid ethX interface), netconsole will be
entirely disabled. Consequently, the user won't be able to create new
entries in /sys/kernel/config/netconsole/ as that directory does not
exist.
Apart from misconfiguration, another issue arises when ethX is loaded as
a module and the netconsole= line in the command line points to ethX,
resulting in an obvious failure. This renders netconsole unusable, as
/sys/kernel/config/netconsole/ will never appear. This is more annoying
since users reconfigure (or just toggle) the configuratin later (see
commit 5fbd6cdbe3 ("netconsole: Attach cmdline target to dynamic
target"))
Create /sys/kernel/config/netconsole/ even if the command line arguments
are invalid, so, users can create dynamic entries in netconsole.
Reported-by: Aijay Adams <aijay@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240528084225.3215853-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both LAN9303 and LAN9354 have internal PHYs on both external ports.
Therefore a configuration without SMSC PHY support is non-practical at
least and leads to:
LAN9303_MDIO 8000f00.mdio:00: Found LAN9303 rev. 1
mdio_bus 8000f00.mdio:00: deferred probe pending: (reason unknown)
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240528073147.3604083-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yafang Shao says:
====================
bpf: Add a generic bits iterator
Three new kfuncs, namely bpf_iter_bits_{new,next,destroy}, have been
added for the new bpf_iter_bits functionality. These kfuncs enable the
iteration of the bits from a given address and a given number of bits.
- bpf_iter_bits_new
Initialize a new bits iterator for a given memory area. Due to the
limitation of bpf memalloc, the max number of bits to be iterated
over is (4096 * 8).
- bpf_iter_bits_next
Get the next bit in a bpf_iter_bits
- bpf_iter_bits_destroy
Destroy a bpf_iter_bits
The bits iterator can be used in any context and on any address.
Changes:
- v7->v8:
Refine the interface to avoid dealing with endianness (Andrii)
- v6->v7:
Fix endianness error for non-long-aligned data (Andrii)
- v5->v6:
Add positive tests (Andrii)
- v4->v5:
Simplify test cases (Andrii)
- v3->v4:
- Fix endianness error on s390x (Andrii)
- zero-initialize kit->bits_copy and zero out nr_bits (Andrii)
- v2->v3:
Optimization for u64/u32 mask (Andrii)
- v1->v2:
Simplify the CPU number verification code to avoid the failure on s390x
(Eduard)
- bpf: Add bpf_iter_cpumask
https://lwn.net/Articles/961104/
- bpf: Add new bpf helper bpf_for_each_cpu
https://lwn.net/Articles/939939/
====================
Link: https://lore.kernel.org/r/20240517023034.48138-1-laoar.shao@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add test cases for the bits iter:
- Positive cases
- Bit mask representing a single word (8-byte unit)
- Bit mask representing data spanning more than one word
- The index of the set bit
- Nagative cases
- bpf_iter_bits_destroy() is required after calling
bpf_iter_bits_new()
- bpf_iter_bits_destroy() can only destroy an initialized iter
- bpf_iter_bits_next() must use an initialized iter
- Bit mask representing zero words
- Bit mask representing fewer words than expected
- Case for ENOMEM
- Case for NULL pointer
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240517023034.48138-3-laoar.shao@gmail.com
