- kprobes: Fix possible use-after-free issue on kprobe registration. Since
check_kprobe_address_safe() uses `is_module_text_address()` and
`__module_text_address()` separately, if the probe address is on an
unloading module, the first `is_module_text_address()` return true but
the second `__module_text_address()` returns NULL (module is unloaded
between them). Thus it expects the probe is on the kernel text, and
skips to get the module reference. In this case, when it arms a breakpoint
on the probe address, it may cause a use-after-free problem.
To fix this issue, we only use `__module_text_address()` once and tries
to get reference of the module, if it fails, reject the probe.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmYWrOEbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b9ugIAKBeaLfuhoa45V/XZ+If
GyIvXnmldj8e0U6fCQL58rFdzHfjUMt2X7r8sQrMgjVhRHbtE1SnKqOOi/NNMb6Z
2KOESX73xj94ohG0ydSEYP/W1QVyDByMxAIRGpmKAmAnt+7GA76iCQrcgwYirTFV
okgnldJvH0RNm4xIuD4YAQMJnYXg9WJFxaA127uI/JGCzw7R4OBQ9i2PaSS4oXYr
ZZhH2x+D6fcwFY5Sr5ApAcIQfvfk6IG5xLHu981r93Y/BncorIi8I4MtaZFvoWwQ
SdCi85KPG1R99rok/54Lm4tfPPQa8oNMBiImIcF5iCzC/CUh6GEn5tCifefV/UmW
7i0=
=PVv1
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"Fix possible use-after-free issue on kprobe registration.
check_kprobe_address_safe() uses `is_module_text_address()` and
`__module_text_address()` separately.
As a result, if the probed address is in a module that is being
unloaded, the first `is_module_text_address()` might return true but
then the `__module_text_address()` call might return NULL if the
module has been unloaded between the two.
The result is that kprobe believes the probe is on the kernel text,
and skips getting a module reference. In this case, when it arms a
breakpoint on the probe address, it may cause a use-after-free.
To fix this issue, only use `__module_text_address()` once and get a
reference to the module then. If it fails, reject the probe"
* tag 'probes-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Fix possible use-after-free issue on kprobe registration
The Spectrum-4 ASIC supports 100Gb/s per lane link modes, but the only
one currently supported by the driver is 800Gb/s over eight lanes.
Add support for 100Gb/s over one lane, 200Gb/s over two lanes and
400Gb/s over four lanes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/1d77830f6abcc4f0d57a7f845e5a6d97a75a434b.1712667750.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In my recent commit, I missed that do_replace() handlers
use copy_from_sockptr() (which I fixed), followed
by unsafe copy_from_sockptr_offset() calls.
In all functions, we can perform the @optlen validation
before even calling xt_alloc_table_info() with the following
check:
if ((u64)optlen < (u64)tmp.size + sizeof(tmp))
return -EINVAL;
Fixes: 0c83842df4 ("netfilter: validate user input for expected length")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240409120741.3538135-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fs/proc: Fix to not show original kernel cmdline more than twice on
/proc/bootconfig.
- fs/proc: Fix to show the original cmdline only if the bootconfig
modifies it.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmYWrVMbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bwxMH/0c/y0wimIlEgqhl27j1
+SCIA9SBF3oZ7P9Jajs/tZZf8jNwOsuXFBQbwqgAkxdKbolaLkhbLOBqKg8LVodH
fzpDh+w0BxYVnPLTQe1dpOrygEcfWEM7RdwskwDYyNDDuTZecYkbmHF3mlYnyj5h
/aPSBcfqHqjM8ltUxjus2B2kMcS/Khun2HVyhQRpVeiRMZPtLpdh9RyNhAwwlfGV
9WLH5JTg45EHN5V9GL5RzX86HIQ82ZfWtqTKdrU7u7ahph3NN6enkD1+MI2vMqjG
t8F/GsFeFdgXfVE2B4HZPWdA07PUeh416iDeajZBY8QlyK3rt/vATkKcGyyYdVJK
EGI=
=N4qD
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- show the original cmdline only once, and only if it was modeified by
bootconfig
* tag 'bootconfig-fixes-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fs/proc: Skip bootloader comment if no embedded kernel parameters
fs/proc: remove redundant comments from /proc/bootconfig
After commit 40867d74c3 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it is possible to configure FIB rules
that match on iif / oif being a l3mdev port. It was not possible before
as these parameters were reset to the ifindex of the l3mdev device
itself prior to the FIB rules lookup.
Add tests that cover this functionality as it does not seem to be
covered by existing ones and I am aware of at least one user that needs
this functionality in addition to the one mentioned in [1].
Reuse the existing FIB rules tests by simply configuring a VRF prior to
the test and removing it afterwards. Differentiate the output of the
non-VRF tests from the VRF tests by appending "(VRF)" to the test name
if a l3mdev FIB rule is present.
Verified that these tests do fail on kernel 5.15.y which does not
include the previously mentioned commit:
# ./fib_rule_tests.sh -t fib_rule6_vrf
[...]
TEST: rule6 check: oif redirect to table (VRF) [FAIL]
[...]
TEST: rule6 check: iif redirect to table (VRF) [FAIL]
# ./fib_rule_tests.sh -t fib_rule4_vrf
[...]
TEST: rule4 check: oif redirect to table (VRF) [FAIL]
[...]
TEST: rule4 check: iif redirect to table (VRF) [FAIL]
[1] https://lore.kernel.org/netdev/20200922131122.GB1601@ICIPI.localdomain/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240409110816.2508498-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240409091203.39062-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nla_put_uint can either write a u32 or u64 netlink attribute value. The
size depends on whether the value can be represented with a u32 or requires
a u64. Use a uint annotation in various documentation to represent this.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20240409232520.237613-2-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We weren't respecting trans->journal_replay_not_finished - we shouldn't
be searching the journal keys unless we have a ref on them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
dropping read locks in bch2_btree_node_lock_write_nofail() dates from
before we had the cycle detector; we can now tell the cycle detector
directly when taking a lock may not fail because we can't handle
transaction restarts.
This is needed for adding should_be_locked asserts.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
One btree update might have terminated in a node update, and then while
it is in flight another btree update might free that original node.
This race has to be handled in btree_update_nodes_written() - we were
missing a READ_ONCE().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pavel Begunkov says:
====================
optimise local CPU skb_attempt_defer_free
Optimise the case when an skb comes to skb_attempt_defer_free()
on the same CPU it was allocated on. The patch 1 enables skb caches
and gives frags a chance to hit the page pool's fast path.
CPU bound benchmarking with perfect skb_attempt_defer_free()
gives around 1% of extra throughput.
====================
Link: https://lore.kernel.org/r/cover.1712711977.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_attempt_defer_free() is used to free already processed skbs, so pass
SKB_CONSUMED as the reason in kfree_skb_napi_cache().
Suggested-by: Jason Xing <kerneljasonxing@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/bcf5dbdda79688b074ab7ae2238535840a6d3fc2.1712711977.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Optimise skb_attempt_defer_free() when run by the same CPU the skb was
allocated on. Instead of __kfree_skb() -> kmem_cache_free() we can
disable softirqs and put the buffer into cpu local caches.
CPU bound TCP ping pong style benchmarking (i.e. netbench) showed a 1%
throughput increase (392.2 -> 396.4 Krps). Cross checking with profiles,
the total CPU share of skb_attempt_defer_free() dropped by 0.6%. Note,
I'd expect the win doubled with rx only benchmarks, as the optimisation
is for the receive path, but the test spends >55% of CPU doing writes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/a887463fb219d973ec5ad275e31194812571f1f5.1712711977.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I forgot 32bit arches might have 64bit alignment for u64
fields.
tcp_sock_write_txrx group does not contain pointers,
but two u64 fields. It is possible that on 32bit kernel,
a 32bit hole is before tp->tcp_clock_cache.
I will try to remember a group can be bigger on 32bit
kernels in the future.
With help from Vladimir Oltean.
Fixes: d2c3a7eb1a ("tcp: more struct tcp_sock adjustments")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404082207.HCEdQhUO-lkp@intel.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240409140914.4105429-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cros_ec_uart_probe() function calls devm_serdev_device_open() before
it calls serdev_device_set_client_ops(). This can trigger a NULL pointer
dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
...
? ttyport_receive_buf
A simplified version of crashing code is as follows:
static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl,
const u8 *data,
size_t count)
{
struct serdev_device *serdev = ctrl->serdev;
if (!serdev || !serdev->ops->receive_buf) // CRASH!
return 0;
return serdev->ops->receive_buf(serdev, data, count);
}
It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops
will also exist. This conflicts with the existing cros_ec_uart_probe()
logic, as it first calls devm_serdev_device_open() (which sets
SERPORT_ACTIVE), and only later sets serdev->ops via
serdev_device_set_client_ops().
Commit 01f95d42b8 ("platform/chrome: cros_ec_uart: fix race
condition") attempted to fix a similar race condition, but while doing
so, made the window of error for this race condition to happen much
wider.
Attempt to fix the race condition again, making sure we fully setup
before calling devm_serdev_device_open().
Fixes: 01f95d42b8 ("platform/chrome: cros_ec_uart: fix race condition")
Cc: stable@vger.kernel.org
Signed-off-by: Noah Loomans <noah@noahloomans.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20240410182618.169042-2-noah@noahloomans.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The commit 40b5d2f15c ("net: dsa: mt7530: Add support for EEE features")
brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
SkyLake Huang (黃啟澤) from MediaTek for providing information on the
internal EEE switch bit.
There are existing boards that were not designed to pull the pin low.
Because of that, the EEE status currently depends on the board design.
The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
used to control an LED. Once the bit is unset, the pin will be low. That
will make the active low LED turn on. The pin is controlled by the switch
PHY. It seems that the PHY controls the pin in the way that it inverts the
pin state. That means depending on the wiring of the LED connected to
LAN2LED0 on the board, the LED may be on without an active link.
To not cause this unwanted behaviour whilst enabling EEE on all boards, set
the internal EEE switch bit on the CORE_PLL_GROUP4 register.
My testing on MT7531 shows a certain amount of traffic loss when EEE is
enabled. That said, I haven't come across a board that enables EEE. So
enable EEE on the switch MACs but disable EEE advertisement on the switch
PHYs. This way, we don't change the behaviour of the majority of the boards
that have this switch. The mediatek-ge PHY driver already disables EEE
advertisement on the switch PHYs but my testing shows that it is somehow
enabled afterwards. Disabling EEE advertisement before the PHY driver
initialises keeps it off.
With this change, EEE can now be enabled using ethtool.
Fixes: 40b5d2f15c ("net: dsa: mt7530: Add support for EEE features")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240408-for-net-mt7530-fix-eee-for-mt7531-mt7988-v3-1-84fdef1f008b@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rpcgss_context trace event acceptor field is a dynamically sized
string that records the "data" parameter. But this parameter is also
dependent on the "len" field to determine the size of the data.
It needs to use __string_len() helper macro where the length can be passed
in. It also incorrectly uses strncpy() to save it instead of
__assign_str(). As these macros can change, it is not wise to open code
them in trace events.
As of commit c759e60903 ("tracing: Remove __assign_str_len()"),
__assign_str() can be used for both __string() and __string_len() fields.
Before that commit, __assign_str_len() is required to be used. This needs
to be noted for backporting. (In actuality, commit c1fa617cae ("tracing:
Rework __assign_str() and __string() to not duplicate getting the string")
is the commit that makes __string_str_len() obsolete).
Cc: stable@vger.kernel.org
Fixes: 0c77668ddb ("SUNRPC: Introduce trace points in rpc_auth_gss.ko")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Rather than use the older style ->read() hook, use ->read_iter() so that
signalfd can support both O_NONBLOCK and IOCB_NOWAIT for non-blocking
read attempts.
Split the fd setup into two parts, so that signalfd can mark the file
mode with FMODE_NOWAIT before installing it into the process table.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use the older style ->read() hook, use ->read_iter() so that
userfaultfd can support both O_NONBLOCK and IOCB_NOWAIT for non-blocking
read attempts.
Split the fd setup into two parts, so that userfaultfd can mark the file
mode with FMODE_NOWAIT before installing it into the process table. With
that, we can also defer grabbing the mm until we know the rest will
succeed, as the fd isn't visible before then.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch timerfd to using fops->read_iter(), so it can support not just
O_NONBLOCK but IOCB_NOWAIT as well. With the latter, users like io_uring
interact with timerfds a lot better, as they can be driven purely
by the poll trigger.
Manually get and install the required fd, so that FMODE_NOWAIT can be
set before the file is installed into the file table.
No functional changes intended in this patch, it's purely a straight
conversion to using the read iterator method.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The modpost script is not happy
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-spi.o
because there is a missing module description.
Add it to the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240410202912.1659275-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus ring buffer code could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the struct
vmbus_gpadl for the ring buffers to decide whether to free the memory.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-6-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-6-mhklinux@outlook.com>
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The VMBus device UIO driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-5-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-5-mhklinux@outlook.com>
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
The netvsc driver could free decrypted/shared pages if
set_memory_decrypted() fails. Check the decrypted field in the gpadl
to decide whether to free the memory.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-4-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-4-mhklinux@outlook.com>
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
In order to make sure callers of vmbus_establish_gpadl() and
vmbus_teardown_gpadl() don't return decrypted/shared pages to
allocators, add a field in struct vmbus_gpadl to keep track of the
decryption status of the buffers. This will allow the callers to
know if they should free or leak the pages.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-3-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-3-mhklinux@outlook.com>
In CoCo VMs it is possible for the untrusted host to cause
set_memory_encrypted() or set_memory_decrypted() to fail such that an
error is returned and the resulting memory is shared. Callers need to
take care to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional or security
issues.
VMBus code could free decrypted pages if set_memory_encrypted()/decrypted()
fails. Leak the pages if this happens.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240311161558.1310-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240311161558.1310-2-mhklinux@outlook.com>
If the network configuration strings are passed as a combination of IPv4
and IPv6 addresses, the current KVP daemon does not handle processing for
the keyfile configuration format.
With these changes, the keyfile config generation logic scans through the
list twice to generate IPv4 and IPv6 sections for the configuration files
to handle this support.
Testcases ran:Rhel 9, Hyper-V VMs
(IPv4 only, IPv6 only, IPv4 and IPv6 combination)
Co-developed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Tested-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com>
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
Coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() and scnprintf() will be converted as well if these files have
such abused cases.
This patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended.
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: linux-hyperv@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240319034350.1574454-1-lizhijian@fujitsu.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240319034350.1574454-1-lizhijian@fujitsu.com>
I've verified that the tests matches libbsd's strlcat()/strlcpy()
implementation.
Please note that as strlcat()/strlcpy() are not part of the libc, the
tests are only compiled when using nolibc.
Signed-off-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The return code should always be strlen(src), and we should copy at most
size-1 bytes.
While we are there, make sure to null-terminate the dst buffer if we
copied something.
Signed-off-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The return code should always be strlen(src) + strnlen(dst, size).
Let's make sure to copy at most size-1 bytes from src and null-terminate
the dst buffer if we did copied something.
While we can use strnlen() and strncpy() to implement strlcat(), this is
simple enough and results in shorter code when compiled.
Signed-off-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
As with commit 8d304a3740, "tools/nolibc/string: export memset() and
memmove()", gcc -Os without -ffreestanding may fail to compile with:
cc -fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib -lgcc -static -o test test.c
/usr/bin/ld: /tmp/cccIasKL.o: in function `main':
test.c:(.text.startup+0x1e): undefined reference to `strlen'
collect2: error: ld returned 1 exit status
As on the aforementioned commit, this patch adds a section to export
this function so compilation works on those cases too.
Signed-off-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Pass user_p_len to memcpy() instead of heap->len to prevent realloc()
from copying an extra sizeof(heap) bytes from beyond the allocated
region.
Signed-off-by: Brennan Xavier McManus <bxmcmanus@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Fixes: 0e0ff63840 ("tools/nolibc/stdlib: Implement `malloc()`, `calloc()`, `realloc()` and `free()`")
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Translate dev-tools/kmemleak.rst into Chinese and add it into
zh_CN/dev-tools/index.rst.
Signed-off-by: Haoyang Liu <tttturtleruss@hust.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240406083643.5056-1-tttturtleruss@hust.edu.cn
Jakub Kicinski says:
====================
selftests: move bpf-offload test from bpf to net
The test_offload.py test fits in networking and bpf equally
well. We started adding more Python tests in networking
and some of the code in test_offload.py can be reused,
so move it to networking. Looks like it bit rotted over
time and some fixes are needed.
Admittedly more code could be extracted but I only had
the time for a minor cleanup :(
====================
Link: https://lore.kernel.org/r/20240409031549.3531084-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/lib/py/nsim.py already contains the most useful parts
of the netdevsim wrapper classes. Reuse them.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Non-ancient ip (iproute2-5.15.0, libbpf 0.7.0) refuses to load
the sample with maps because we don't generate BTF:
libbpf: BTF is required, but is missing or corrupted.
ERROR: opening BPF object file failed
Enable BTF by adding -g to clang flags. With that done
neither of the programs load:
libbpf: prog 'func': error relocating .BTF.ext function info: -22
libbpf: prog 'func': failed to relocate calls: -22
libbpf: failed to load object 'ksft-net-drv/net/sample_ret0.bpf.o'
Andrii explains that this is because we don't specify
section names for the code. Add the section names, too.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maps are removed asynchronously. Either there's a bigger delay
now or the test has always been flaky. Retry waiting in the loop.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're building more python tests on the netdev side, and some
of the classes from the venerable BPF offload tests can be reused.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240409031549.3531084-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quoting of the '"no regressions" rule' expression differs between
occurrences, sometimes being presented as '"no regressions rule"'. Unify
the quoting using the first form which seems semantically correct or is
at least used dominantly, albeit marginally.
One of the occurrences is obviously missing the 'rule' part -- add it.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Reviewed-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240328194342.11760-2-balejk@matfyz.cz
Use of the CPU MSR driver is now optional.
Perf is now preferred for many counters.
Non-root users can now execute turbostat, though with limited function.
Add counters for some new GFX hardware.
Minor fixes.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEE67dNfPFP+XUaA73mB9BFOha3NhcFAmYWj4MUHGxlbi5icm93
bkBpbnRlbC5jb20ACgkQB9BFOha3NhdH+RAArg3G1VJz2+wQGVyLqjSt4waz7nR4
3wc0BNYCZOnInvLqWRoWjs7w2e8CzfdVHYEAFc9N3mM2FVU+LlSJuEf78if8BWZ4
2ROXCKs2X9I4MMFFvGy4ugOsjSs9jIvYjiWUgaFNL79Fvgi4xZCIPs5cg0j4EOU9
P2N2z3YMiO88wcGwzaH1v/hODSJ2hRhQ38KSmeIzVv64727OqLo/TIWrGMIUedBT
sliYrojz202IoArbejfCqP7VtZhnLml6Rln+n8/X3rg3n25RYbaZnwYugkR8WmhZ
stC0CmB6Rz9IN9yeucq+BlXDOUUUvLQwat3OHw7oZ6zg0+Uu1yD0aPXoqreiZvC3
iJUr+Qy++NFYmMPRDTWZubdPDAcwuv+PWud2VDfqY8Jgld2GzhucBBmGA+z1NMAl
gRXFnaUc9R7c/+ubh+R7mrlQxiRk2Jt4VduJ9wdufEWKIaIGDh/1qyFLFKOP32Ko
zviEOV3WAJHbAGYZUUIzlKmhyQFafuyKbb/o0AO3VvqhCO0vGkzA4yauzkSYGpqo
8IlNgJxBs0dQqTXOw5ubgnazfjvHB//kBYfvJL9Sg2nuHdQV8+0X/DfYsxvRNo/i
9khvJF5MPnzb/sgIRXQphWxL6hwZYcx4LfRv6PQD8g7aKwAcs0D/VzcB5fZ+KM+a
TViqVjUkJ4LSaJ0=
=oucB
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Use of the CPU MSR driver is now optional
- Perf is now preferred for many counters
- Non-root users can now execute turbostat, though with limited
functionality
- Add counters for some new GFX hardware
- Minor fixes
* tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (26 commits)
tools/power turbostat: v2024.04.10
tools/power/turbostat: Add support for Xe sysfs knobs
tools/power/turbostat: Add support for new i915 sysfs knobs
tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz
tools/power/turbostat: Fix uncore frequency file string
tools/power/turbostat: Unify graphics sysfs snapshots
tools/power/turbostat: Cache graphics sysfs path
tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICX
tools/power turbostat: Add selftests
tools/power turbostat: read RAPL counters via perf
tools/power turbostat: Add proper re-initialization for perf file descriptors
tools/power turbostat: Clear added counters when in no-msr mode
tools/power turbostat: add early exits for permission checks
tools/power turbostat: detect and disable unavailable BICs at runtime
tools/power turbostat: Add reading aperf and mperf via perf API
tools/power turbostat: Add --no-perf option
tools/power turbostat: Add --no-msr option
tools/power turbostat: enhance -D (debug counter dump) output
tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read
tools/power turbostat: Read base_hz and bclk from CPUID.16H if available
...