Few recently introduced structs are named 'nhlt2' instead of 'nhlt' to
avoid naming conflicts. With duplicate types gone, the conflicts are no
more.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0c7379eae2a0342bfc36d6b7db0bb90ad13a5a3e
There are no users for the duplicated NHLT table components.
Link: https://github.com/acpica/acpica/pull/890
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The table is composed of a range of endpoints with each describing
audio formats they support. Most of the operations involve iterating
over elements of the table and filtering them. Simplify the process by
implementing range of getters.
While the acpi_nhlt_endpoint_mic_count() stands out a bit, it is a
critical component for any AudioDSP driver to know how many digital
microphones it is dealing with.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 32260f5ce519e854546ce907fc0cc449e1fe51fe
Non HDAudio Link Table (NHLT) is designed to separate hardware-related
description (registers) from AudioDSP firmware-related one i.e.:
pipelines and modules that together make up the audio stream on Intel
DSPs. This task is important as same set of hardware registers can be
used with different topologies and vice versa, same topology could be
utilized with different set of hardware. As the hardware registers
description is directly tied to specific platform, intention is to have
such description part of low-level firmware e.g.: BIOS.
The initial design has been provided in early Sky Lake (SKL) days. The
audio architecture goes by the name cAVS. SKL is a representative of
cAVS 1.5. The table helps describe endpoint capabilities ever since.
While Raptor Lake (RPL) is the last of cAVS architecture - cAVS 2.5 to
be precise - its successor, the ACE architecture which begun with
Meteor Lake (MTL) inherited the design for all I2S and PDM
configurations. These two configurations are the primary targets for
NHLT table.
Due to naming conflicts with existing code, several structs are named
'nhlt2' rather than 'nhlt'. Follow up changes clean this up once
existing code has no users and is removed.
Link: https://github.com/acpica/acpica/pull/912
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The issue occurs when the devfreq cooling device uses the EM power model
and the get_real_power() callback is provided by the driver.
The EM power table is sorted ascending,can't index the table by cooling
device state,so convert cooling state to performance state by
dfc->max_state - dfc->capped_state.
Fixes: 615510fe13 ("thermal: devfreq_cooling: remove old power model and use EM")
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
platform_pci_wakeup_init() was removed by d2e5f0c16a ("ACPI / PCI: Rework
the setup and cleanup of device wakeup") but was still mentioned in the
documentation.
Update the doc to refer to pci_acpi_setup(), which does the equivalent
work.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When driver use the cpufreq_frequency_table_verify() as the
cpufreq_driver->verify's callback. It may cause the policy->max
bigger than the freq_qos's max freq.
Just as follow:
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # cat scaling_available_frequencies
614400 768000 988000 1228800 1469000 1586000 1690000 1833000 2002000 2093000
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # echo 1900000 > scaling_max_freq
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # echo 1900000 > scaling_min_freq
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # cat scaling_max_freq
2002000
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # cat scaling_min_freq
2002000
When user set the qos_min and qos_max as the same value, and the value
is not in the freq-table, the above scenario will occur.
This is because in cpufreq_frequency_table_verify() func, when it can not
find the freq in table, it will change the policy->max to be a bigger freq,
as above, because there is no 1.9G in the freq-table, the policy->max would
be set to 2.002G. As a result, the cpufreq_policy->max is bigger than the
user's qos_max. This is unreasonable.
So use a smaller freq when can not find the freq in fre-table, to prevent
the policy->max exceed the qos's max freq.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Due to a hardware defect in GL975x, config accesses when ASPM is enabled
frequently cause Replay Timer Timeouts in the Port leading to the device.
These are Correctable Errors, so the Downstream Port logs it in its AER
Correctable Error Status register and, when the error is not masked, sends
an ERR_COR message upstream. The message terminates at a Root Port, which
may generate an AER interrupt so the OS can log it.
The Correctable Error logging is an annoyance but not a major issue itself.
But when the AER interrupt happens during suspend, it can prevent the
system from suspending.
015c9cbcf0 ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of
AER") masked these errors in the GL975x itself.
Mask these errors in the Port leading to GL975x as well. Note that Replay
Timer Timeouts will still be logged in the AER Correctable Error Status
register, but they will not cause AER interrupts.
Link: https://lore.kernel.org/r/20240327024509.1071189-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: commit log, update dmesg note]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Victor Shih <victor.shih@genesyslogic.com.tw>
Cc: Ben Chuang <benchuanggli@gmail.com>
When keeping the upper end of a cache block entry, the entry[] array
must be indexed by the offset from the base register of the block,
i.e. max - mas.index.
The code was indexing entry[] by only the register address, leading
to an out-of-bounds access that copied some part of the kernel
memory over the cache contents.
This bug was not detected by the regmap KUnit test because it only
tests with a block of registers starting at 0, so mas.index == 0.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f033c26de5 ("regmap: Add maple tree based register cache")
Link: https://msgid.link/r/20240327114406.976986-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP PDM configuration has to be verified for all combinations.
Remove FLAG_AMD_LEGACY_ONLY_DMIC check.
Fixes: 3a94c8ad0a ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240327104657.3537664-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZgHylwAKCRDbK58LschI
gzmaAPwKhDFFSU/DU08k22muJxLIXVR7Xx04baJ9mPiFrqZyyAEA8RFNamC7wZIB
AnfwwoDjfDTP60rlXFaEf8UT5PpA7Ao=
=/KF6
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-03-25
We've added 38 non-merge commits during the last 13 day(s) which contain
a total of 50 files changed, 867 insertions(+), 274 deletions(-).
The main changes are:
1) Add the ability to specify and retrieve BPF cookie also for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints, from Andrii Nakryiko.
2) Allow the use of bpf_get_{ns_,}current_pid_tgid() helper for all
program types and add additional BPF selftests, from Yonghong Song.
3) Several improvements to bpftool and its build, for example, enabling
libbpf logs when loading pid_iter in debug mode, from Quentin Monnet.
4) Check the return code of all BPF-related set_memory_*() functions during
load and bail out in case they fail, from Christophe Leroy.
5) Avoid a goto in regs_refine_cond_op() such that the verifier can
be better integrated into Agni tool which doesn't support backedges
yet, from Harishankar Vishwanathan.
6) Add a small BPF trie perf improvement by always inlining
longest_prefix_match, from Jesper Dangaard Brouer.
7) Small BPF selftest refactor in bpf_tcp_ca.c to utilize start_server()
helper instead of open-coding it, from Geliang Tang.
8) Improve test_tc_tunnel.sh BPF selftest to prevent client connect
before the server bind, from Alessandro Carminati.
9) Fix BPF selftest benchmark for older glibc and use syscall(SYS_gettid)
instead of gettid(), from Alan Maguire.
10) Implement a backward-compatible method for struct_ops types with
additional fields which are not present in older kernels,
from Kui-Feng Lee.
11) Add a small helper to check if an instruction is addr_space_cast
from as(0) to as(1) and utilize it in x86-64 JIT, from Puranjay Mohan.
12) Small cleanup to remove unnecessary error check in
bpf_struct_ops_map_update_elem, from Martin KaFai Lau.
13) Improvements to libbpf fd validity checks for BPF map/programs,
from Mykyta Yatsenko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (38 commits)
selftests/bpf: Fix flaky test btf_map_in_map/lookup_update
bpf: implement insn_is_cast_user() helper for JITs
bpf: Avoid get_kernel_nofault() to fetch kprobe entry IP
selftests/bpf: Use start_server in bpf_tcp_ca
bpf: Sync uapi bpf.h to tools directory
libbpf: Add new sec_def "sk_skb/verdict"
selftests/bpf: Mark uprobe trigger functions with nocf_check attribute
selftests/bpf: Use syscall(SYS_gettid) instead of gettid() wrapper in bench
bpf-next: Avoid goto in regs_refine_cond_op()
bpftool: Clean up HOST_CFLAGS, HOST_LDFLAGS for bootstrap bpftool
selftests/bpf: scale benchmark counting by using per-CPU counters
bpftool: Remove unnecessary source files from bootstrap version
bpftool: Enable libbpf logs when loading pid_iter in debug mode
selftests/bpf: add raw_tp/tp_btf BPF cookie subtests
libbpf: add support for BPF cookie for raw_tp/tp_btf programs
bpf: support BPF cookie in raw tracepoint (raw_tp, tp_btf) programs
bpf: pass whole link instead of prog when triggering raw tracepoint
bpf: flatten bpf_probe_register call chain
selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh
selftests/bpf: Add a sk_msg prog bpf_get_ns_current_pid_tgid() test
...
====================
Link: https://lore.kernel.org/r/20240325233940.7154-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document already upstreamed and used Qualcomm SM6125 UFS host controller to fix
dtbs_check warnings like:
sm6125-xiaomi-laurel-sprout.dtb: ufs@4804000: compatible:0: 'qcom,sm6125-ufshc' is not one of ['qcom,msm8994-ufshc', ...
sm6125-xiaomi-laurel-sprout.dtb: ufs@4804000: Unevaluated properties are not allowed ('compatible' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20240326174632.209745-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Document already upstreamed and used Qualcomm SC7180 UFS host controller
to fix dtbs_check warnings like:
sc7180-idp.dtb: ufshc@1d84000: compatible:0: 'qcom,sc7180-ufshc' is not one of ...
sc7180-idp.dtb: ufshc@1d84000: clocks: [[39, 99], [39, 7], [39, 98], [39, 107], [36, 0], [39, 106], [39, 105]] is too short
sc7180-idp.dtb: ufshc@1d84000: clock-names: ['core_clk', 'bus_aggr_clk', 'iface_clk', 'core_clk_unipro', ...] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Document already upstreamed and used Qualcomm SC8180x UFS host
controller to fix dtbs_check warnings like:
sc8180x-primus.dtb: ufshc@1d84000: compatible:0: 'qcom,sc8180x-ufshc' is not one of ['qcom,msm8994-ufshc', ... ]
sc8180x-primus.dtb: ufshc@1d84000: Unevaluated properties are not allowed ('compatible' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
As I-Cache flush on current RISC-V needs to send IPIs to every CPU cores
in the system is very costly, limiting flush_icache_mm to be called only
when vma->vm_flags has VM_EXEC can help minimize the frequency of these
operations. It improves performance and reduces disturbances when
copy_from_user_page is needed such as profiling with perf.
For I-D coherence concerns, it will not fail if such a page adds VM_EXEC
flags in the future since we have checked it in the __set_pte_at function.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/tencent_6D851035F6F2FD0B5A69FB391AE39AC6300A@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
arch/riscv/kernel/sys_riscv.c builds without using anything
from asm-generic/mman-common.h. There seems to be no reason
to include this file.
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Fixes: 9e2e6042a7 ("riscv: Allow PROT_WRITE-only mmap()")
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231212-removeasmgeneric-v2-1-a0e6d7df34a7@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 3a6dd5f614 ("riscv: remove unneeded #include
<asm-generic/export.h>") removed the last use of
include/asm-generic/export.h.
This deprecated header can go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240323090615.1244904-1-masahiroy@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In arch/riscv/Makefile, KBUILD_IMAGE is assigned in two separate
if-blocks.
When CONFIG_XIP_KERNEL is disabled, the decision made by the first
if-block is overwritten by the second one, which is redundant and
unreadable.
Merge the two if-blocks.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240323113500.1249272-1-masahiroy@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit cca98e9f8b ("mm: enforce that vmap can't map pages
executable") enforces the W^X protection by not allowing remapping
existing pages as executable. Add riscv bits so that riscv can benefit
the same protection.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231121160637.3856-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
psvt->limit.string can only be 8 bytes so let's use the appropriate size
macro ACPI_LIMIT_STR_MAX_LEN.
Neither psvt->limit.string or psvt_user[i].limit.string requires the
NUL-padding behavior that strncpy() provides as they have both been
filled with NUL-bytes prior to the string operation.
| memset(&psvt->limit, 0, sizeof(u64));
and
| psvt_user = kzalloc(psvt_len, GFP_KERNEL);
Let's use `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer without unnecessarily
NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings # [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable and disable hardware feedback interface (HFI) when user space
handler is present. For example, enable HFI, when intel-speed-select or
Intel Low Power daemon is running and subscribing to thermal netlink
events. When user space handlers exit or remove subscription for
thermal netlink events, disable HFI.
Summary of changes:
- Register a thermal genetlink notifier
- In the notifier, process THERMAL_NOTIFY_BIND and THERMAL_NOTIFY_UNBIND
reason codes to count number of thermal event group netlink multicast
clients. If thermal netlink group has any listener enable HFI on all
packages. If there are no listener disable HFI on all packages.
- When CPU is online, instead of blindly enabling HFI, check if
the thermal netlink group has any listener. This will make sure that
HFI is not enabled by default during boot time.
- Actual processing to enable/disable matches what is done in
suspend/resume callbacks. Create two functions hfi_enable_instance()
and hfi_disable_instance(), which can be called from the netlink
notifier callback and suspend/resume callbacks.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Almost all thermal netlink structures use thermal_genl prefix.
Change thermal_gnl_family name accordingly for consistency.
No functional impact.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a new feature to the thermal netlink framework, enabling the
registration of sub drivers to receive events via a notifier mechanism.
Specifically, implement genetlink family bind and unbind callbacks to send
BIND and UNBIND events.
The primary purpose of this enhancement is to facilitate the tracking of
user-space consumers by the Intel HFI driver. By leveraging these
notifications, the driver can determine when consumers are present
or absent.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Anna-Maria and Frederic are working in this area for years. Volunteer them
into co-maintainer roles.
While at it bring the file lists up to date.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240325172048.548199937@linutronix.de
Share same codes with 4.0.5 and enable collaborate mode for VPE.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Align with FW changes.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
DCN351 and DCN35 should use the same bounding box and IP settings.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
NumFclkLevelsEnabled is used for DcfClocks bounds check
instead of designated NumDcfClkLevelsEnabled.
That can cause array index out-of-bounds access.
[How]
Use designated variable for dcn35 DcfClocks bounds check.
Fixes: a8edc9cc0b ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
MPC flow rate control is not needed for DCN30 and above. Current logic
that uses it can result in underflow for certain edge cases (such as
DSC N422 + ODM combine + 422 left edge pixel).
[How]
Remove MPC flow rate control logic and programming for DCN30 and above.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why&how]
In some platform out_transfer_func may not be popualted. We need to check
for null before dereferencing it.
Fixes: d2dea1f140 ("drm/amd/display: Generalize new minimal transition path")
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous patch to allow DTBCLK disable didn't address boot case. Driver
thinks DTBCLK is disabled by default, so we don't send disable message to
PMFW. DTBCLK is then enabled at idle desktop on boot, burning power.
[How]
Set dtbclk_en to true on boot so that disable message is sent during first
commit.
Fixes: 27750e176a ("drm/amd/display: Allow DTBCLK disable for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There were some fixes in dcn35 that need
to be ported over to dcn351 to prevent any
regression.
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to re-enable idle power optimizations after entering PSR. Since,
we get kicked out of idle power optimizations before entering PSR
(entering PSR requires us to write to DCN registers, which isn't allowed
while we are in IPS).
Fixes: a9b1a4f684 ("drm/amd/display: Add more checks for exiting idle in DC")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This causes flicker on a bunch of eDP panels. The info_packet code
also caused regressions on other OSes that we haven't' seen on Linux
yet, but that is likely due to the fact that we haven't had a chance
to test those environments on Linux.
We'll need to revisit this.
This reverts commit 202260f645.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
TLB flush after unmap accidentially was removed on
gfx9.4.2. It is to add it back.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
To fix mode2 reset failure.
Should power on VPE when hw_init.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and how]
Bounding box clocks for DCN351 should be increased as per request
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Xi Liu <xi.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase Z8 watermark times from 210->250us and 320->350us.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check cgroup permissions when returning DMA-buf info and
based on cgroup info return the GPU id of the GPU that have
access to the BO.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add new vcn and jpeg msg
v2: squash in updates (Alex)
v3: rework code for better compat with other smu14.x variants (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently a device is only really released once the umount returns to
userspace due to how file closing works. That ultimately could cause
an old umount assumption to be violated that concurrent umount and mount
don't fail. So an exclusively held device with a temporary holder should
be yielded before the filesystem is gone. Add a helper that allows
callers to do that. This also allows us to remove the two holder ops
that Linus wasn't excited about.
Link: https://lore.kernel.org/r/20240326-vfs-bdev-end_holder-v1-1-20af85202918@kernel.org
Fixes: f3a608827d ("bdev: open block device as files") # mainline only
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The original changes in v6.8 do allow for a block device to be reopened
with BLK_OPEN_RESTRICT_WRITES provided the same holder is used as per
bdev_may_open(). I think this has a bug.
The first opener @f1 of that block device will set bdev->bd_writers to
-1. The second opener @f2 using the same holder will pass the check in
bdev_may_open() that bdev->bd_writers must not be greater than zero.
The first opener @f1 now closes the block device and in bdev_release()
will end up calling bdev_yield_write_access() which calls
bdev_writes_blocked() and sets bdev->bd_writers to 0 again.
Now @f2 holds a file to that block device which was opened with
exclusive write access but bdev->bd_writers has been reset to 0.
So now @f3 comes along and succeeds in opening the block device with
BLK_OPEN_WRITE betraying @f2's request to have exclusive write access.
This isn't a practical issue yet because afaict there's no codepath
inside the kernel that reopenes the same block device with
BLK_OPEN_RESTRICT_WRITES but it will be if there is.
Fix this by counting the number of BLK_OPEN_RESTRICT_WRITES openers. So
we only allow writes again once all BLK_OPEN_RESTRICT_WRITES openers are
done.
Link: https://lore.kernel.org/r/20240323-abtauchen-klauen-c2953810082d@brauner
Fixes: ed5cc702d3 ("block: Add config option to not allow writing to mounted devices")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>