[ Upstream commit 8ca944fea4 ]
ACPI_RESOURCE_NAME_LARGE_MAX should be equal to the last actually
used resource descriptor index (ACPI_RESOURCE_NAME_CLOCK_INPUT).
Otherwise 'resource_index' in 'acpi_ut_validate_resource()' may be
clamped incorrectly and resulting value may issue an out-of-bounds
access for 'acpi_gbl_resource_types' array. Compile tested only.
Fixes: 520d4a0ee5 ("ACPICA: add support for ClockInput resource (v6.5)")
Link: cf00116c
Link: https://marc.info/?l=linux-acpi&m=175449676131260&w=2
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00f83f0e07 ]
The function set_prescale_div() is responsible for calculating the clock
divisor settings such that the input clock rate is divided down such that
the required period length is at most 0x10000 clock ticks. If period_cycles
is an integer multiple of 0x10000, the divisor period_cycles / 0x10000 is
good enough. So round up in the calculation of the required divisor and
compare it using >= instead of >.
Fixes: 19891b20e7 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/85488616d7bfcd9c32717651d0be7e330e761b9c.1754927682.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc7ce5bfc5 ]
In Up-Count Mode the timer is reset to zero one tick after it reaches
TBPRD, so the period length is (TBPRD + 1) * T_TBCLK. This matches both
the documentation and measurements. So the value written to the TBPRD has
to be one less than the calculated period_cycles value.
A complication here is that for a 100% relative duty-cycle the value
written to the CMPx register has to be TBPRD + 1 which might overflow if
TBPRD is 0xffff. To handle that the calculation of the AQCTLx register
has to be moved to ehrpwm_pwm_config() and the edge at CTR = CMPx has to
be skipped.
Additionally the AQCTL_PRD register field has to be 0 because that defines
the hardware's action when the maximal counter value is reached, which is
(as above) one clock tick before the period's end. The period start edge
has to happen when the counter is reset and so is defined in the AQCTL_ZRO
field.
Fixes: 19891b20e7 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/dc818c69b7cf05109ecda9ee6b0043a22de757c1.1754927682.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21a5e91fda ]
The pwm driver calls pm_runtime_get_sync() when the hardware becomes
enabled and pm_runtime_put_sync() when it becomes disabled. The PWM's
state is kept when a consumer goes away, so the call to
pm_runtime_put_sync() in the .free() callback is unbalanced resulting in
a non-functional device and a reference underlow for the second consumer.
The easiest fix for that issue is to just not drop the runtime PM
reference in .free(), so do that.
Fixes: 19891b20e7 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/bbb089c4b5650cc1f7b25cf582d817543fd25384.1754927682.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffe6a5d1dd ]
This devicetree contained only the SoC compatible but lacked the
machine specific one: add a "mediatek,mt8516-pumpkin" compatible
to the list to fix dtbs_check warnings.
Fixes: 9983822c8c ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-39-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09a1e9c973 ]
All of the MT6360 regulator nodes were wrong and would not probe
because the regulator names are supposed to be lower case, but
they are upper case in this devicetree.
Change all nodes to be lower case to get working regulators.
Fixes: 94aaf79a6a ("arm64: dts: mediatek: add Kontron 3.5"-SBC-i1200")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-38-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236681fb64 ]
Change the latch-ck value from 0x14 to 4: as only bits [0-3] are
actually used, the final value that gets written to the register
field for DAT_LATCH_CK_SEL is just 0x4.
This also fixes dtbs_check warnings.
Fixes: 5a65dcccf4 ("arm64: dts: mediatek: mt6795-xperia-m5: Add eMMC, MicroSD slot, SDIO")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250724083914.61351-21-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 072755cca7 ]
Rename the inner 'frm' variable to 'resp_frm' in the write path of
mmc_route_rpmb_frames() to avoid shadowing the outer 'frm' variable.
The function declares 'frm' at function scope pointing to the request
frame, but then redeclares another 'frm' variable inside the write
block pointing to the response frame. This shadowing makes the code
confusing and error-prone.
Using 'resp_frm' for the response frame makes the distinction clear
and improves code readability.
Fixes: 7852028a35 ("mmc: block: register RPMB partition with the RPMB subsystem")
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98967109c9 ]
The node names for "pmic", "regulators", "rtc", and "keys" are
dictated by the PMIC MFD binding: change those to adhere to it.
Fixes: aef783f3e0 ("arm64: dts: mediatek: Add MT6331 PMIC devicetree")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-17-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0370911565 ]
The touchscreen controller used with the original Krabby design is the
Elan eKTH6918, which is in the same family as eKTH6915, but supporting
a larger screen size with more sense lines.
OTOH, the touchscreen controller that actually shipped on the Tentacruel
devices is the Elan eKTH6A12NAY. A compatible string was added for it
specifically because it has different power sequencing timings.
Fix up the touchscreen nodes for both these. This also includes adding
a previously missing reset line. Also add "no-reset-on-power-off" since
the power is always on, and putting it in reset would consume more
power.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250812090135.3310374-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc06f9126 ]
Make sure to drop the reference to the saw device taken by
of_find_device_by_node() after retrieving its driver data during
probe().
Also drop the reference to the CPU node sooner to avoid leaking it in
case there is no saw node or device.
Fixes: 60f3692b5f ("cpuidle: qcom_spm: Detach state machine from main SPM handling")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1a68ba573 ]
Make sure to drop the references taken by of_find_device_by_node() when
looking up the thermal sensor and opp devices during probe on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 0bbb09b2af ("soc: mediatek: SVS: add mt8192 SVS GPU driver")
Cc: Roger Lu <roger.lu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250909095651.5530-3-johan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ab4f79ea9 ]
Make sure to drop the references taken by of_find_device_by_node() when
looking up the thermal sensor and opp devices during probe on probe
failure (e.g. probe deferral) and on driver unbind.
Fixes: 681a02e950 ("soc: mediatek: SVS: introduce MTK SVS engine")
Cc: Roger Lu <roger.lu@mediatek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250909095651.5530-2-johan@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0454346d1c ]
Enabling compile testing should not enable every individual driver (we
have "allyesconfig" for that).
Fixes: 4a434abc40 ("firmware: meson-sm: enable build as module")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725075429.10056-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f89c7fb83a ]
On RK3588 with LPDDR4X memory, the cycle count as returned by
perf stat -a -e rockchip_ddr/cycles/ sleep 1
consistently reads half as much as what the actual DDR frequency is at.
For a LPDDR4X module running at 2112MHz, I get more like 1056059916
cycles per second, which is almost bang-on half what it should be. No,
I'm not mixing up megatransfers and megahertz.
Consulting the downstream driver, this appears to be because the RK3588
hardware specifically (and RK3528 as well, for future reference) needs a
multiplier of 2 to get to the correct frequency with everything but
LPDDR5.
The RK3588's actual memory bandwidth measurements in MB/s are correct
however, as confirmed with stress-ng --stream. This makes me think the
access counters are not affected in the same way. This tracks with the
vendor kernel not multiplying the access counts either.
Solve this by adding a new member to the dfi struct, which each SoC can
set to whatever they want, but defaults to 1 if left unset by the SoC
init functions. The event_get_count op can then use this multiplier if
the cycle count is requested.
The cycle multiplier is not used in rockchip_dfi_get_event because the
vendor driver doesn't use it there either, and we don't do other actual
bandwidth unit conversion stuff in there anyway.
Fixes: 481d97ba61 ("PM / devfreq: rockchip-dfi: add support for RK3588")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250530-rk3588-dfi-improvements-v1-1-6e077c243a95@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3374b5fb26 ]
When test suspend resume with 6.8 based kernel, system can't resume
and I got below error which can be also reproduced with 6.16 rc6+
kernel.
mtk-pcie-gen3 112f0000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f0000.pcie: PM: dpm_run_callback(): genpd_resume_noirq returns -110
mtk-pcie-gen3 112f0000.pcie: PM: failed to resume noirq: error -110
After investigation, looks pcie0 has the same problem as pcie1 as
decribed in commit 3d7fdd8e38 ("arm64: dts: mediatek: mt8195:
Remove suspend-breaking reset from pcie1").
Fixes: ecc0af6a3f ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250721095959.57703-1-guoqing.jiang@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b59a9f762 ]
If AT_SYSINFO_EHDR is missing the whole test needs to be skipped.
Currently this results in the following output:
TAP version 13
1..16
# AT_SYSINFO_EHDR is not present!
This output is incorrect, as "1..16" still requires the subtest lines to
be printed, which isn't done however.
Switch to the correct skipping functions, so the output now correctly
indicates that no subtests are being run:
TAP version 13
1..0 # SKIP AT_SYSINFO_EHDR is not present!
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-2-90f499dd35f8@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f15e0f9ef ]
The _rval register variable is meant to be an output operand of the asm
statement but is instead used as input operand.
clang 20.1 notices this and triggers -Wuninitialized warnings:
tools/testing/selftests/timers/auxclock.c:154:10: error: variable '_rval' is uninitialized when used here [-Werror,-Wuninitialized]
154 | return VDSO_CALL(self->vdso_clock_gettime64, 2, clockid, ts);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/testing/selftests/timers/../vDSO/vdso_call.h:59:10: note: expanded from macro 'VDSO_CALL'
59 | : "r" (_rval) \
| ^~~~~
tools/testing/selftests/timers/auxclock.c:154:10: note: variable '_rval' is declared here
tools/testing/selftests/timers/../vDSO/vdso_call.h:47:2: note: expanded from macro 'VDSO_CALL'
47 | register long _rval asm ("r3"); \
| ^
It seems the list of input and output operands have been switched around.
However as the argument registers are not always initialized they can not
be marked as pure inputs as that would trigger -Wuninitialized warnings.
Adding _rval as another input and output operand does also not work as it
would collide with the existing _r3 variable.
Instead reuse _r3 for both the argument and the return value.
Fixes: 6eda706a53 ("selftests: vDSO: fix the way vDSO functions are called for powerpc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-1-90f499dd35f8@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506180223.BOOk5jDK-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7942b226e6 ]
When executing modinfo null_blk, there is an error in the description
of module parameter mbps, and the output information of cache_size is
incomplete.The output of modinfo before and after applying this patch
is as follows:
Before:
[...]
parm: cache_size:ulong
[...]
parm: mbps:Cache size in MiB for memory-backed device.
Default: 0 (none) (uint)
[...]
After:
[...]
parm: cache_size:Cache size in MiB for memory-backed device.
Default: 0 (none) (ulong)
[...]
parm: mbps:Limit maximum bandwidth (in MiB/s).
Default: 0 (no limit) (uint)
[...]
Fixes: 058efe000b ("null_blk: add module parameters for 4 options")
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f062fc5b0 ]
Change the 'ret' variable in sh_pfc_pinconf_group_set() from unsigned
int to int, as it needs to store either negative error codes or zero
returned by sh_pfc_pinconf_set().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Fixes: d0593c363f ("pinctrl: sh-pfc: Propagate errors on group config")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250831084958.431913-4-rongqianfeng@vivo.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit def5612170 ]
Fix the checkpatch warning:
CHECK: Alignment should match open parenthesis
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc33bf0e09 ]
The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check
that the pointer is valid.
Fixes: e09bd5757b ("PM / devfreq: mtk-cci: Handle sram regulator probe deferral")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.kernel.org/project/linux-pm/patch/aJTNHz8kk8s6Q2os@stanley.mountain/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27322753c8 ]
The dtbs_check validation for am335x-cm-t335.dtb flags an error
for an unevaluated 'num-serializer' property in the mcasp0 node.
This property is obsolete; it is not defined in the davinci-mcasp-audio
schema and is not used by the corresponding (or any) driver.
Remove this unused property to fix the schema validation warning.
Fixes: 48ab364478 ("ARM: dts: cm-t335: add audio support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830215957.285694-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af5b85505 ]
The ti,keep-vref-on property, defined as a boolean flag in the Device
Tree schema, was incorrectly assigned a value (<1>) in the DTS file,
causing a validation error: "size (4) error for type flag". Remove
the value to match the schema and ensure compatibility with the driver
using device_property_read_bool(). This fixes the dtbs_check error.
Fixes: ed05637c30 ("ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250822225052.136919-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9658a92fad ]
The ti,en-ck32k-xtal property, defined as a boolean in the Device Tree
schema, was incorrectly assigned a value (<1>) in the DTS file, causing
a validation error: "size (4) error for type flag". The driver uses
of_property_read_bool(), expecting a boolean. Remove the value to fix
the dtbs_check error.
Fixes: 262178b6b8 ("ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/all/20250822222530.113520-1-jihed.chaibi.dev@gmail.com/
Link: https://lore.kernel.org/r/20250822222530.113520-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 437054b1bb ]
The prototype of __vdso_gettimeofday() uses this struct. However
gettime.h's own includes do not provide a definition for it.
Add a forward declaration, similar to other used structs.
Fixes: 42874e4eb3 ("arch: vdso: consolidate gettime prototypes")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250815-vdso-sparc64-generic-2-v2-1-b5ff80672347@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be82483d1b ]
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fe ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b4518c99 ]
Change the 'ret' variable in blk_stack_limits() from unsigned int to int,
as it needs to store negative value -1.
Storing the negative error codes in unsigned type, or performing equality
comparisons (e.g., ret == -1), doesn't cause an issue at runtime [1] but
can be confusing. Additionally, assigning negative error codes to unsigned
type may trigger a GCC warning when the -Wsign-conversion flag is enabled.
No effect on runtime.
Link: https://lore.kernel.org/all/x3wogjf6vgpkisdhg3abzrx7v7zktmdnfmqeih5kosszmagqfs@oh3qxrgzkikf/#1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Fixes: fe0b393f2c ("block: Correct handling of bottom device misaligment")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250902130930.68317-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6058316d1 ]
Memory programming doesn't work for devices without page support.
For example, LP5562 has 3 engines but doesn't support pages,
the start address is changed depending on engine number.
According to datasheet [1], the PROG MEM register addresses for each
engine are as follows:
Engine 1: 0x10
Engine 2: 0x30
Engine 3: 0x50
However, the current implementation incorrectly calculates the address
of PROG MEM register using the engine index starting from 1:
prog_mem_base = 0x10
LP55xx_BYTES_PER_PAGE = 0x20
Engine 1: 0x10 + 0x20 * 1 = 0x30
Engine 2: 0x10 + 0x20 * 2 = 0x50
Engine 3: 0x10 + 0x20 * 3 = 0x70
This results in writing to the wrong engine memory, causing pattern
programming to fail.
To correct it, the engine index should be decreased:
Engine 1: 0x10 + 0x20 * 0 = 0x10
Engine 2: 0x10 + 0x20 * 1 = 0x30
Engine 3: 0x10 + 0x20 * 2 = 0x50
1 - https://www.ti.com/lit/ds/symlink/lp5562.pdf
Fixes: 31379a57cf ("leds: leds-lp55xx: Generalize update_program_memory function")
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Link: https://lore.kernel.org/r/20250820-lp5562-prog-mem-address-v1-1-8569647fa71d@anton-paar.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d33ce3634 ]
The expect non-zero macro was incorrect and never used. Fix its
definition.
Fixes: 362aecb2d8 ("selftests/nolibc: add basic infrastructure to ease creation of nolibc tests")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20250731201225.323254-2-benjamin@sipsolutions.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d35d068fb ]
Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e08cdd604 ]
PCIe `port01` of t8103-j457 (iMac, M1, 2 USB-C ports, 2021) is unused
and disabled. Linux' PCI subsystem assigns the ethernet nic from
`port02` to bus 02. This results into assigning `pcie0_dart_1` from the
disabled port as iommu. The `pcie0_dart_1` instance is disabled and
probably fused off (it is on the M2 Pro Mac mini which has a disabled
PCIe port as well).
Without iommu the ethernet nic is not expected work.
Adjusts the "bus-range" and the PCIe devices "reg" property to PCI
subsystem's bus number.
Fixes: 7c77ab91b3 ("arm64: dts: apple: Add missing M1 (t8103) devices")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-1-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 296302d3d8 ]
The at91_mckx_ps_restore() assembly function is responsible for setting
back MCKx system bus clocks after exiting low power modes.
Fix a typo and use tmp3 variable instead of tmp2 to correctly set MCKx
to previously saved state.
Tmp2 was used without the needed changes in CSS and DIV. Moreover the
required bit 7, telling that MCR register's content is to be changed
(CMD/write), was not set.
Fix function comment to match tmp variables actually used.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 28eb1d40fe ("ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes")
Link: https://lore.kernel.org/r/20250827145427.46819-3-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[claudiu.beznea: s/sate/state in commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c7ef92f6d ]
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:
kernfs: can not remove 'nr_tags', no directory
WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
Call Trace:
remove_files.isra.1+0x38/0xb0
sysfs_remove_group+0x4d/0x100
sysfs_remove_groups+0x31/0x60
__kobject_del+0x23/0xf0
kobject_del+0x17/0x40
blk_mq_unregister_hctx+0x5d/0x80
blk_mq_sysfs_unregister_hctxs+0x94/0xd0
blk_mq_update_nr_hw_queues+0x124/0x760
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x92/0x120 [null_blk]
kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it.
Fixes: 477e19dedc ("blk-mq: adjust debugfs and sysfs register when updating nr_hw_queues")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250826084854.1030545-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f87412d18e ]
Unconditionally clear the TCS_AMC_MODE_TRIGGER bit when a
transaction completes. Previously this bit was only cleared when
a wake TCS was borrowed as an AMC TCS but not for dedicated
AMC TCS. Leaving this bit set for AMC TCS and entering deeper low
power modes can generate a false completion IRQ.
Prevent this scenario by always clearing the TCS_AMC_MODE_TRIGGER
bit upon receiving a completion IRQ.
Fixes: 15b3bf61b8 ("soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-rpmh_rsc_change-v1-1-138202c31bf6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11b3de1c03 ]
The cpuidle device's memory is leaked when cpuidle device registration
fails in acpi_processor_power_init(). Free it as appropriate.
Fixes: 3d339dcbb5 ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250728070612.1260859-2-lihuisong@huawei.com
[ rjw: Changed the order of the new statements, added empty line after if () ]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fdaf3b183 ]
According to the imx95 RM, the lpuart7 rx and tx DMA's srcid are 88 and 87,
and the lpuart8 rx and tx DMA's srcid are 90 and 89. So correct them.
Fixes: 915fd2e127 ("arm64: dts: imx95: add edma[1..3] nodes")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94737568b ]
The assignment of the USB ports is wrong and needs to be swapped.
The OTG (USB-C) port is on the first port and the host port with
the onboard hub is on the second port.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 2b52fd6035 ("arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8faa8a466 ]
After commit 20bda12a0e (“firmware: arm_scmi: Make VirtIO transport a
standalone driver”), the VirtIO transport probes independently. During
scmi_virtio_probe, scmi_probe() is called, which intune invokes
scmi_protocol_acquire() that sends a message over the virtqueue and
waits for a reply.
Previously, DRIVER_OK was only set after scmi_vio_probe, in the core
virtio via virtio_dev_probe(). According to the Virtio spec (3.1 Device
Initialization):
| The driver MUST NOT send any buffer available notifications to the
| device before setting DRIVER_OK.
Some type-1 hypervisors block available-buffer notifications until the
driver is marked OK. In such cases, scmi_vio_probe stalls in
scmi_wait_for_reply(), and the probe never completes.
Resolve this by setting DRIVER_OK immediately after the device-specific
setup, so scmi_probe() can safely send notifications.
Note after splitting the transports into modules, the probe sequence
changed a bit. We can no longer rely on virtio_device_ready() being
called by the core in virtio_dev_probe(), because scmi_vio_probe()
doesn’t complete until the core SCMI stack runs scmi_probe(), which
immediately issues the initial BASE protocol exchanges.
Fixes: 20bda12a0e ("firmware: arm_scmi: Make VirtIO transport a standalone driver")
Signed-off-by: Junnan Wu <junnan01.wu@samsung.com>
Message-Id: <20250812075343.3201365-1-junnan01.wu@samsung.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd5d4621ba ]
Broadcom STB platforms were early adopters (2017) of the SCMI framework and as
a result, not all deployed systems have a Device Tree entry where SCMI
protocol 0x13 (PERFORMANCE) is declared as a clock provider, nor are the
CPU Device Tree node(s) referencing protocol 0x13 as their clock
provider. This was clarified in commit e11c480b6d ("dt-bindings:
firmware: arm,scmi: Extend bindings for protocol@13") in 2023.
For those platforms, we allow the checks done by scmi_dev_used_by_cpus()
to continue, and in the event of not having done an early return, we key
off the documented compatible string and give them a pass to continue to
use scmi-cpufreq.
Fixes: 6c9bb86922 ("cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5974e8f6c3 ]
There is a register to clamp the flash current per LED channel when
safety timer is disabled. It needs to be updated according to the
maximum torch LED current setting to ensure the torch current won't
be clamped unexpectedly.
Fixes: 96a2e242a5 ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729-fix-torch-clamp-issue-v2-1-9b83816437a3@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c6b4146de ]
Previously, re-using pinned DEVMAP maps would always fail, because
get_map_info on a DEVMAP always returns flags with BPF_F_RDONLY_PROG set,
but BPF_F_RDONLY_PROG being set on a map during creation is invalid.
Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
get_map_info when checking for compatibility with an existing DEVMAP.
The same problem is handled in a third-party ebpf library:
- https://github.com/cilium/ebpf/issues/925
- https://github.com/cilium/ebpf/pull/930
Fixes: 0cdbb4b09a ("devmap: Allow map lookups from eBPF")
Signed-off-by: Yureka Lilian <yuka@yuka.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814180113.1245565-3-yuka@yuka.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abdaf49be5 ]
Graph tracer framework ensures we won't migrate, kprobe_multi_link_prog_run
called all the way from graph tracer, which disables preemption in
function_graph_enter_regs, as Jiri and Yonghong suggested, there is no
need to use migrate_disable. As a result, some overhead may will be reduced.
And add cant_sleep check for __this_cpu_inc_return.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814121430.2347454-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c80d797206 ]
Based on a bisect, it appears that commit 7ee9887703 ("timers:
Implement the hierarchical pull model") has somehow inadvertently
broken BPF selftest test_tcpnotify_user. The error that is being
generated by this test is as follows:
FAILED: Wrong stats Expected 10 calls, got 8
It looks like the change allows timer functions to be run on CPUs
different from the one they are armed on. The test had pinned itself
to CPU 0, and in the past the retransmit attempts also occurred on CPU
0. The test had set the max_entries attribute for
BPF_MAP_TYPE_PERF_EVENT_ARRAY to 2 and was calling
bpf_perf_event_output() with BPF_F_CURRENT_CPU, so the entry was
likely to be in range. With the change to allow timers to run on other
CPUs, the current CPU tasked with performing the retransmit might be
bumped and in turn fall out of range, as the event will be filtered
out via __bpf_perf_event_output() using:
if (unlikely(index >= array->map.max_entries))
return -E2BIG;
A possible change would be to explicitly set the max_entries attribute
for perf_event_map in test_tcpnotify_kern.c to a value that's at least
as large as the number of CPUs. As it turns out however, if the field
is left unset, then the libbpf will determine the number of CPUs available
on the underlying system and update the max_entries attribute accordingly
in map_set_def_max_entries().
A further problem with the test is that it has a thread that continues
running up until the program exits. The main thread cleans up some
LIBBPF data structures, while the other thread continues to use them,
which inevitably will trigger a SIGSEGV. This can be dealt with by
telling the thread to run for as long as necessary and doing a
pthread_join on it before exiting the program.
Finally, I don't think binding the process to CPU 0 is meaningful for
this test any more, so get rid of that.
Fixes: 435f90a338 ("selftests/bpf: add a test case for sock_ops perf-event notification")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/aJ8kHhwgATmA3rLf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
