Since there is no chip-specific code behind 'chk_switch_dmdp()',
there is no need to maintain function pointer in 'struct rtl_hal_ops'
and relevant common code may be simplified. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016135925.129223-3-dmantipov@yandex.ru
Since 'fill_fake_txdesc()' is actually implemented for rtl8192cu
only but never used, there is no need to maintain function pointer
in 'struct rtl_hal_ops' and 'rtl92cu_fill_fake_txdesc()' may be
dropped. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016135925.129223-2-dmantipov@yandex.ru
Since 'pre_fill_tx_bd_desc()' is actually used for rtl8192ee only,
there is no need to maintain function pointer in 'struct rtl_hal_ops',
and 'rtl92ee_pre_fill_tx_bd_desc()' may be converted to static.
Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016135925.129223-1-dmantipov@yandex.ru
We need this register setting only for the software DCFO(digital carrier
frequency offset) compensation so we move it to the proper position to
prevent the incorrect setting.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-6-pkshih@realtek.com
DCFO tracking compensate the CFO (carrier frequency offset) by digital
hardware that provides fine CFO estimation. Although the avg_cfo which
is a coarse information becomes zero, still we need DCFO tracking to
compensate the residual CFO. However, the original flow skips the case
when avg_cfo is zero, so we fix it to have expected performance.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-5-pkshih@realtek.com
The register address used for CFO(carrier frequency offset) tracking is
different from WiFi 7 series, so we change the way to access it. And we
refine the flow of CFO tracking to compatible all WiFi 7 and 6 ICs.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-4-pkshih@realtek.com
The register fields of BSS color map and valid bit are in the same register
for existing chips, but coming WiFi 7 chips define another register to
set valid bit, so add a field to chip_info to reuse the code.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-3-pkshih@realtek.com
Change naming to disambiguate the functions because their names are common
and not clear about the purpose. Not change logic at all.
These functions are to control baseband AGC while BT coexists with WiFi.
Among these functions, ctrl_btg_bt_rx is used to control AGC related
settings, which is affected by BT RX, while BT shares the same path
with wifi; ctrl_nbtg_bt_tx is used to control AGC settings under
non-shared path condition, which is affected by BT TX.
Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-2-pkshih@realtek.com
Sometimes firmware may enter strange state or infinite
loop due to unknown bug, and then it will lead critical
function fail, such as sending H2C command or changing
power mode. In these abnormal states, we add more debug
information, including hardware register status, to help
further investigation.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016053554.744180-3-pkshih@realtek.com
The coming dump function for FW malfunction will add a function to
dump registers to reflect status. However, if we are not debugging
the mechanism, we don't print anything, so avoid reading registers by
checking debug mask to reduce IO.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016053554.744180-2-pkshih@realtek.com
Remove set but otherwise unused 'sleep_ms', 'last_action', 'state'
and 'last_slept' members of 'struct rtl_ps_ctl' (these seems to be
a leftovers from some older code) and adjust 'rtl_swlps_wq_callback()'
accordingly. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231013124534.19714-1-dmantipov@yandex.ru
This is a kconfig warning in a randconfig when CONFIG_PCI is not set:
WARNING: unmet direct dependencies detected for SSB_EMBEDDED
Depends on [n]: SSB [=y] && SSB_DRIVER_MIPS [=y] && SSB_PCICORE_HOSTMODE [=n]
Selected by [y]:
- BCM47XX_SSB [=y] && BCM47XX [=y]
This is caused by arch/mips/bcm47xx/Kconfig's symbol BCM47XX_SSB
selecting SSB_EMBEDDED when CONFIG_PCI is not set.
This warning can be prevented by altering SSB_EMBEDDED to allow for
PCI=n or the former SSB_PCICORE_HOSTMODE.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Michael Büsch <m@bues.ch>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231012220856.23260-1-rdunlap@infradead.org
During device init, a struct for HW stats will be allocated. As HW
stats are not supported for VF and HIP08, currently
hns_roce_alloc_hw_port_stats() returns NULL in this case. However,
ib-core considers the returned NULL pointer as memory allocation
failure and returns ENOMEM, eventually leading to the failure of VF
and HIP08 init.
In the case where the driver does not support the .alloc_hw_port_stats()
ops, ib-core will return EOPNOTSUPP and ignore this error code in the
upper layer function. So for VF and HIP08, just don't set the HW stats
ops to ib-core.
Fixes: 5a87279591 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The num_ports capability of devices should be compared with the
number of port(i.e. the input param "port_num") but not the port
index(i.e. port_num - 1).
Fixes: 5a87279591 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
SL set by users may exceed the capability of devices. So add check
for this situation.
Fixes: fba429fcf9 ("RDMA/hns: Fix missing fields in address vector")
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: f0cb411aad ("RDMA/hns: Use new interface to modify QP context")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.
This patch adds judgement for this situation.
Fixes: 30b707886a ("RDMA/hns: Support inline data in extented sge space for RC")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
ucmd in hns_roce_create_qp_common() are not initialized. But it works fine
until new member sdb_addr is added to struct hns_roce_ib_create_qp.
If the user-mode driver uses an old version ABI, then the value of the new
member will be undefined after ib_copy_from_udata().
This patch fixes it by initialize this variable to 0. And the default value
of the new member sdb_addr will be 0 which is invalid.
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The current driver will print all asynchronous events. Some of the
print levels are set improperly, e.g. SRQ limit reach and SRQ last
wqe reach, which may also occur during normal operation of the software.
Currently, the information of these event is printed as a warning,
which causes a large amount of printing even during normal use of the
application. As a result, the service performance deteriorates.
This patch fixes the printing storms by modifying the print level.
Fixes: b00a92c8f2 ("RDMA/hns: Move all prints out of irq handle")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Document named opp-microvolt property for opp-v2-kryo-cpu schema.
This property is used to declare multiple voltage ranges selected on the
different values read from efuses. The selection is done based on the
speed pvs values and the named opp-microvolt property is selected by the
qcom-cpufreq-nvmem driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add netlink command that enables/disables privileged QKEY by default.
It is disabled by default, since according to IB spec only privileged
users are allowed to use privileged QKEY.
According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."
Using rdma tool,
$rdma system set privileged-qkey on
When enabled non-privileged users would be able to use
controlled QKEYs which are considered privileged.
Using rdma tool,
$rdma system set privileged-qkey off
When disabled only privileged users would be able to use
controlled QKEYs.
You can also use the command below to check the parameter state:
$rdma system show
netns shared privileged-qkey off copy-on-fork on
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/90398be70a9d23d2aa9d0f9fd11d2c264c1be534.1696848201.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
virt_to_phys() doesn't need the address pointer to be mutable.
At the same time allowing it to be mutable leads to the following build
warning for constant pointers:
warning: passing argument 1 of ‘virt_to_phys’ discards ‘const’ qualifier from pointer target type
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/168155747391.13678.10634415747614468991.stgit@skinsburskii.localdomain
Sparse reports an endianness error with the else case of
val = (cpu_endian ? be64_to_cpu(reg_entry->reg_val) :
(u64)(reg_entry->reg_val));
This is a safe operation because the code is explicitly working with
dynamic endianness, so add the __force annotation to tell Sparse to
ignore it.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-13-bgray@linux.ibm.com
Sparse reports a warning when casting to an int. There is no need to
cast in the first place, so drop them.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-12-bgray@linux.ibm.com
Sparse reports dereferencing an __iomem pointer. These routines
are clearly low level handlers for IO memory, so force cast away
the __iomem annotation to tell sparse the dereferences are safe.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-11-bgray@linux.ibm.com
Sparse reports dereference of a __user pointer. copy_mc_to_user() takes
a __user pointer, verifies it, then calls the generic copy routine
copy_mc_generic().
As we have verified the pointer, cast out the __user annotation when
passing to copy_mc_generic().
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-10-bgray@linux.ibm.com
Sparse reports an endian mismatch with args to opal_int_get_xirr().
Checking the skiboot source[1] shows the function takes a __be32*
(as expected), so update the function declaration to reflect this.
[1]: 80e2b1dc73/hw/xive.c (L3479)
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-9-bgray@linux.ibm.com
Sparse reports endianness mismatches in the KVM shared regs getter and
setter helpers.
This code has dynamic endianness behind a safe interface, so a force is
warranted here to tell sparse this is OK.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-8-bgray@linux.ibm.com
Sparse reports several endianness warnings on variables and functions
that are consistently treated as big endian. There are no
multi-endianness shenanigans going on here so fix these low hanging
fruit up in one patch.
All changes are just type annotations; no endianness switching
operations are introduced by this patch.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-7-bgray@linux.ibm.com
Sparse reports several function implementations annotated with extern.
This is clearly incorrect, likely just copied from an actual extern
declaration in another file.
Fix the sparse warnings by removing extern.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-6-bgray@linux.ibm.com
Sparse reports several uses of 0 for pointer arguments and comparisons.
Replace with NULL to better convey the intent. Remove entirely if a
comparison to follow the kernel style of implicit boolean conversions.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-5-bgray@linux.ibm.com
Sparse reports an invalid endian cast here. The code is written for
big endian platforms, so le32_to_cpu() acts as a byte reversal.
This file is checked by sparse on a little endian build though, so
replace the reverse function with the dedicated swab32() function to
better express the intent of the code.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-4-bgray@linux.ibm.com
Sparse reports a size mismatch in the endian swap. The Opal
implementation[1] passes the value as a __be64, and the receiving
variable out_qsize is a u64, so the use of be32_to_cpu() appears to be
an error.
[1]: 80e2b1dc73/hw/xive.c (L3854)
Fixes: 88ec6b93c8 ("powerpc/xive: add OPAL extensions for the XIVE native exploitation support")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-2-bgray@linux.ibm.com
Introduce PAGE_EXECONLY_X macro which provides exec-only rights.
The _X may be seen as redundant with the EXECONLY but it helps
keep consistency, all macros having the EXEC right have _X.
And put it next to PAGE_NONE as PAGE_EXECONLY_X is
somehow PAGE_NONE + EXEC just like all other SOMETHING_X are
just SOMETHING + EXEC.
On book3s/64 PAGE_EXECONLY becomes PAGE_READONLY_X.
On book3s/64, as PAGE_EXECONLY is only valid for Radix add
VM_READ flag in vm_get_page_prot() for non-Radix.
And update access_error() so that a non exec fault on a VM_EXEC only
mapping is always invalid, even when the underlying layer don't
always generate a fault for that.
For 8xx, set PAGE_EXECONLY_X as _PAGE_NA | _PAGE_EXEC.
For others, only set it as just _PAGE_EXEC
With that change, 8xx, e500 and 44x fully honor execute-only
protection.
On 40x that is a partial implementation of execute-only. The
implementation won't be complete because once a TLB has been loaded
via the Instruction TLB miss handler, it will be possible to read
the page. But at least it can't be read unless it is executed first.
On 603 MMU, TLB missed are handled by SW and there are separate
DTLB and ITLB. Execute-only is therefore now supported by not loading
DTLB when read access is not permitted.
On hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/4283ea9cbef9ff2fbee468904800e1962bc8fc18.1695659959.git.christophe.leroy@csgroup.eu
On 603 MMU, TLB missed are handled by SW and there are separated
DTLB and ITLB. It is therefore possible to implement execute-only
protection by not loading DTLB when read access is not permitted.
To do that, _PAGE_READ flag is needed but there is no bit available
for it in PTE. On the other hand the only real use of _PAGE_USER is
to implement PAGE_NONE by clearing _PAGE_USER.
As _PAGE_NONE can also be implemented by clearing _PAGE_READ, remove
_PAGE_USER and add _PAGE_READ. Then use the virtual address to know
whether user rights or kernel rights are to be used.
With that change, 603 MMU now honors execute-only protection.
For hash (604) MMU it is more tricky because hash table is common to
load/store and execute. Nevertheless it is still possible to check
whether _PAGE_READ is set before loading hash table for a load/store
access. At least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b7702dd5a041ec59055ed2880f4952e94c087a2e.1695659959.git.christophe.leroy@csgroup.eu
Several places, _PAGE_RW maps to write permission and don't
always imply read. To make it more clear, do as book3s/64 in
commit c7d54842de ("powerpc/mm: Use _PAGE_READ to indicate
Read access") and use _PAGE_WRITE when more relevant.
For the time being _PAGE_WRITE is equivalent to _PAGE_RW but that
will change when _PAGE_READ gets added in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5798782869fe4d2698f104948dabd17657b89395.1695659959.git.christophe.leroy@csgroup.eu
_PAGE_USER is used to select the zone. Today zone 0 is kernel
and zone 1 is user.
To implement _PAGE_NONE, _PAGE_USER is cleared, leading to no access
for user but kernel still has access to the page so it's possible for
a user application to write in that page by using a kernel function
as trampoline.
What is really wanted is to have user rights on pages below TASK_SIZE
and no user rights on pages above TASK_SIZE. Use zones for that.
There are 16 zones so lets use the 4 upper address bits to set the
zone and declare zone rights based on TASK_SIZE.
Then drop _PAGE_USER and reuse it as _PAGE_READ that will be checked
in Data TLB miss handler. That will properly handle PAGE_NONE for
both kernel and user.
In addition, it partially implements execute-only right. The
implementation won't be complete because once a TLB has been loaded
via the Instruction TLB miss handler, it will be possible to read
the page. But at least it can't be read unless it is executed first.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2a13e3ba8a5dec43143cc1f9a91ec71ea1529f3c.1695659959.git.christophe.leroy@csgroup.eu
44x MMU has 6 page protection bits:
- R, W, X for supervisor
- R, W, X for user
It means that it can support X without R.
To do that, _PAGE_READ flag is needed but there is no bit available
for it in PTE. On the other hand the only real use of _PAGE_USER is
to implement PAGE_NONE by clearing _PAGE_USER.
As _PAGE_NONE can also be implemented by clearing _PAGE_READ,
remove _PAGE_USER and add _PAGE_READ. In order to insert bits in
one go during TLB miss, move _PAGE_ACCESSED and put _PAGE_READ
just after _PAGE_DIRTY so that _PAGE_DIRTY is copied into SW and
_PAGE_READ into SR at once.
With that change, 44x now also honors execute-only protection.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/043e17987b260b99b45094138c6cb2e89e63d499.1695659959.git.christophe.leroy@csgroup.eu
e500 MMU has 6 page protection bits:
- R, W, X for supervisor
- R, W, X for user
It means that it can support X without R.
To do that, _PAGE_READ flag is needed.
With 32 bits PTE there is no bit available for it in PTE. On the
other hand the only real use of _PAGE_USER is to implement PAGE_NONE
by clearing _PAGE_USER. As _PAGE_NONE can also be implemented by
clearing _PAGE_READ, remove _PAGE_USER and add _PAGE_READ. Move
_PAGE_PRESENT into bit 30 so that _PAGE_READ can match SR bit.
With 64 bits PTE _PAGE_USER is already the combination of SR and UR
so all we need to do is to rename it _PAGE_READ.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0849ab6bf7ae2af23f94b0457fa40d0ea3983fe4.1695659959.git.christophe.leroy@csgroup.eu
pte_user() is now only used in pte_access_permitted() to check
access on vmas. User flag is cleared to make a page unreadable.
So rename it pte_read() and remove pte_user() which isn't used
anymore.
For the time being it checks _PAGE_USER but in the near futur
all plateforms will be converted to _PAGE_READ so lets support
both for now.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/72cbb5be595e9ef884140def73815ed0b0b37010.1695659959.git.christophe.leroy@csgroup.eu
Several places, _PAGE_RW maps to write permission and don't
always imply read. To make it more clear, do as book3s/64 in
commit c7d54842de ("powerpc/mm: Use _PAGE_READ to indicate
Read access") and use _PAGE_WRITE when more relevant.
For the time being _PAGE_WRITE is equivalent to _PAGE_RW but that
will change when _PAGE_READ gets added in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1f79b88db54d030ada776dc9845e0e88345bfc28.1695659959.git.christophe.leroy@csgroup.eu
book3s64 need specific masks because it needs _PAGE_PRIVILEGED
for PAGE_NONE.
book3s64 already has _PAGE_RW and _PAGE_RWX.
So add _PAGE_NA, _PAGE_RO and _PAGE_ROX and remove specific
permission masks.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d37a418de52e2c950cad6797e81663b56991366f.1695659959.git.christophe.leroy@csgroup.eu
Prepare a common version of the permission masks that will be based
on _PAGE_NA, _PAGE_RO, _PAGE_ROX, _PAGE_RW, _PAGE_RWX that will be
defined in platform specific headers in later patches.
Put them in a new header pgtable-masks.h which will be included by
platforms.
And prepare a common version of flags used for mapping kernel memory
that will be based on _PAGE_RO, _PAGE_ROX, _PAGE_RW, _PAGE_RWX that
will be defined in platform specific headers.
Put them in unless _PAGE_KERNEL_RO is already defined so that platform
specific definitions can be dismantled one by one.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d31b59efcdb38e675479563307af891aeadf6ec9.1695659959.git.christophe.leroy@csgroup.eu
pte_user() may return 'false' when a user page is PAGE_NONE.
In that case it is still a user page and needs to be handled
as such. So use is_kernel_addr() instead.
And remove "user" text from ptdump as ptdump only dumps
kernel tables.
Note: no change done for book3s/64 which still has it
'priviledge' bit.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c778dad89fad07727c31717a9c62f45357c29ebc.1695659959.git.christophe.leroy@csgroup.eu
