A thread started via eg. user_mode_thread() runs in the kernel to begin
with and then may later return to userspace. While it's running in the
kernel it has a pt_regs at the base of its kernel stack, but that
pt_regs is all zeroes.
If the thread oopses in that state, it leads to an ugly stack trace with
a big block of zero GPRs, as reported by Joel:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3
Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
Call Trace:
[c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable)
[c0000000036afb30] [c00000000013c524] panic+0x178/0x424
[c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324
[c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344
[c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac
[c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000
REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty)
MSR: 0000000000000000 <> CR: 00000000 XER: 00000000
CFAR: 0000000000000000 IRQMASK: 0
GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
NIP [0000000000000000] 0x0
LR [0000000000000000] 0x0
--- interrupt: 0
The all-zero pt_regs looks ugly and conveys no useful information, other
than its presence. So detect that case and just show the presence of the
frame by printing the interrupt marker, eg:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
[c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable)
[c000000003aabb30] [c00000000014c624] panic+0x178/0x424
[c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324
[c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344
[c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac
[c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
To avoid ever suppressing a valid pt_regs make sure the pt_regs has a
zero MSR and TRAP value, and is located at the very base of the stack.
Fixes: 6895dfc047 ("powerpc: copy_thread fill in interrupt frame marker and back chain")
Reported-by: Joel Stanley <joel@jms.id.au>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230824064210.907266-1-mpe@ellerman.id.au
Mixed steppings aren't supported on Intel CPUs. Only one microcode patch
is required for the entire system. The caching of microcode blobs which
match the family and model is therefore pointless and in fact is
dysfunctional as CPU hotplug updates use only a single microcode blob,
i.e. the one where *intel_ucode_patch points to.
Remove the microcode cache and make it an AMD local feature.
[ tglx:
- save only at the end. Otherwise random microcode ends up in the
pointer for early loading
- free the ucode patch pointer in save_microcode_patch() only
after kmemdup() has succeeded, as reported by Andrew Cooper ]
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231017211722.404362809@linutronix.de
The datatype of rx_coalesce_usecs is u32, always larger or equal to zero.
Previous checking does not include value 0, this patch removes the
checking to handle the value 0. This change in behaviour making the
value of 0 cause an error is not a problem because 0 is out of
range of rx_coalesce_usecs.
Signed-off-by: Gan Yi Fang <yi.fang.gan@intel.com>
Link: https://lore.kernel.org/r/20231018030802.741923-1-yi.fang.gan@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AM69 starter kit features an HDMI port and an eDP port.
Add assigned clocks for DSS, DT node for DisplayPort PHY,
pinmux for HDMI hotplug and power down, mcu_i2c1 and dss_vout
for HDMI.
Also enable Serdes4 settings for DP display.
Add the endpoint nodes to describe connection from:
DSS => MHDP => DisplayPort connector
DSS => TI TFP410 DPI-to-DVI Bridge => HDMI connector
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
[j-choudhary@ti.com: Fix dvi-bridge, dss, mhdp and serdes-refclk]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231019054022.175163-6-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable display for J784S4 EVM.
Add assigned clocks for DSS, DT node for DisplayPort PHY and pinmux for
DP HPD. Add the clock frequency for serdes_refclk.
Add the endpoint nodes to describe connection from:
DSS => MHDP => DisplayPort connector.
Also add the GPIO expander-4 node and pinmux for main_i2c4 which is
required for controlling DP power. Set status for all required nodes
for DP-0 as "okay".
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
[j-choudhary@ti.com: move all the changes together to enable DP-0 in EVM]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231019054022.175163-5-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add DSS and DP-bridge node for J784S4 SoC. DSS IP in J784S4 is
same as DSS IP in J721E, so same compatible is being used.
The DP is Cadence MHDP8546.
Disable them by default as nodes are missing port definition
and phy link configurations which are added later in platform
dt file.
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
[j-choudhary@ti.com: move dss & mhdp node together in main, fix dss node]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231019054022.175163-4-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
J784S4 SoC has 4 Serdes instances along with their respective WIZ
instances. Add device-tree nodes for them and disable them by default
as the node is incomplete and phy link properties will be added in
the platform dt file.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[j-choudhary@ti.com: fix serdes_wiz clock order & disable serdes refclk]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231019054022.175163-3-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The system controller node manages the CTRL_MMR0 region.
Add serdes_ln_ctrl node which is used for controlling the SERDES lane mux.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[j-choudhary@ti.com: Fix serdes_ln_ctrl node]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231019054022.175163-2-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
There seems to be no docs for the concept of multiple RSS
contexts and how to configure it. I had to explain it three
times recently, the last one being the charm, document it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231018010758.2382742-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The cgwb cleanup routine will try to release the dying cgwb by switching
the attached inodes. It fetches the attached inodes from wb->b_attached
list, omitting the fact that inodes only with dirty timestamps reside in
wb->b_dirty_time list, which is the case when lazytime is enabled. This
causes enormous zombie memory cgroup when lazytime is enabled, as inodes
with dirty timestamps can not be switched to a live cgwb for a long time.
It is reasonable not to switch cgwb for inodes with dirty data, as
otherwise it may break the bandwidth restrictions. However since the
writeback of inode metadata is not accounted for, let's also switch
inodes with dirty timestamps to avoid zombie memory and block cgroups
when laztytime is enabled.
Fixes: c22d70a162 ("writeback, cgroup: release dying cgwbs by switching attached inodes")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231014125511.102978-1-jefflexu@linux.alibaba.com
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In commit f61b9bb3f838 ("fs: add a new SB_I_NOUMASK flag") we added a
new SB_I_NOUMASK flag that is used by filesystems like NFS to indicate
that umask stripping is never supposed to be done in the vfs independent
of whether or not POSIX ACLs are supported.
Overlayfs falls into the same category as it raises SB_POSIXACL
unconditionally to defer umask application to the upper filesystem.
Now that we have SB_I_NOUMASK use that and make SB_POSIXACL properly
conditional on whether or not the kernel does have support for it. This
will enable use to turn IS_POSIXACL() into nop on kernels that don't
have POSIX ACL support avoding bugs from missed umask stripping.
Link: https://lore.kernel.org/r/20231012-einband-uferpromenade-80541a047a1f@brauner
Acked-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make IS_POSIXACL() return false if POSIX ACL support is disabled.
Never skip applying the umask in namei.c and never bother to do any
ACL specific checks if the filesystem falsely indicates it has ACLs
enabled when the feature is completely disabled in the kernel.
This fixes a problem where the umask is always ignored in the NFS
client when compiled without CONFIG_FS_POSIX_ACL. This is a 4 year
old regression caused by commit 013cdf1088 which itself was not
completely wrong, but failed to consider all the side effects by
misdesigned VFS code.
Prior to that commit, there were two places where the umask could be
applied, for example when creating a directory:
1. in the VFS layer in SYSCALL_DEFINE3(mkdirat), but only if
!IS_POSIXACL()
2. again (unconditionally) in nfs3_proc_mkdir()
The first one does not apply, because even without
CONFIG_FS_POSIX_ACL, the NFS client sets SB_POSIXACL in
nfs_fill_super().
After that commit, (2.) was replaced by:
2b. in posix_acl_create(), called by nfs3_proc_mkdir()
There's one branch in posix_acl_create() which applies the umask;
however, without CONFIG_FS_POSIX_ACL, posix_acl_create() is an empty
dummy function which does not apply the umask.
The approach chosen by this patch is to make IS_POSIXACL() always
return false when POSIX ACL support is disabled, so the umask always
gets applied by the VFS layer. This is consistent with the (regular)
behavior of posix_acl_create(): that function returns early if
IS_POSIXACL() is false, before applying the umask.
Therefore, posix_acl_create() is responsible for applying the umask if
there is ACL support enabled in the file system (SB_POSIXACL), and the
VFS layer is responsible for all other cases (no SB_POSIXACL or no
CONFIG_FS_POSIX_ACL).
Signed-off-by: Max Kellermann <mk@cm4all.com>
Link: https://lore.kernel.org/r/151603744662.29035.4910161264124875658.stgit@rabbit.intern.cm-ag
Signed-off-by: Christian Brauner <brauner@kernel.org>
A backing file struct stores two path's, one "real" path that is referring
to f_inode and one "fake" path, which should be displayed to users in
/proc/<pid>/maps.
There is a lot more potential code that needs to know the "real" path, then
code that needs to know the "fake" path.
Instead of code having to request the "real" path with file_real_path(),
store the "real" path in f_path and require code that needs to know the
"fake" path request it with file_user_path().
Replace the file_real_path() helper with a simple const accessor f_path().
After this change, file_dentry() is not expected to observe any files
with overlayfs f_path and real f_inode, so the call to ->d_real() should
not be needed. Leave the ->d_real() call for now and add an assertion
in ovl_d_real() to catch if we made wrong assumptions.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Link: https://lore.kernel.org/r/CAJfpegtt48eXhhjDFA1ojcHPNKj3Go6joryCPtEFAKpocyBsnw@mail.gmail.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231009153712.1566422-4-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Overlayfs uses backing files with "fake" overlayfs f_path and "real"
underlying f_inode, in order to use underlying inode aops for mapped
files and to display the overlayfs path in /proc/<pid>/maps.
In preparation for storing the overlayfs "fake" path instead of the
underlying "real" path in struct backing_file, define a noop helper
file_user_path() that returns f_path for now.
Use the new helper in procfs and kernel logs whenever a path of a
mapped file is displayed to users.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231009153712.1566422-3-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
A writeable mapped backing file can perform writes to the real inode.
Therefore, the real path mount must be kept writable so long as the
writable map exists.
This may not be strictly needed for ovelrayfs private upper mount,
but it is correct to take the mnt_writers count in the vfs helper.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231009153712.1566422-2-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
So happens it already was not doing it, but there is no need to "hope"
as indicated in the comment.
No changes in generated assembly.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20231004111916.728135-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Backing files as used by overlayfs are never installed into file
descriptor tables and are explicitly documented as such. They aren't
subject to rcu access conditions like regular files are.
Their lifetime is bound to the lifetime of the overlayfs file, i.e.,
they're stashed in ovl_file->private_data and go away otherwise. If
they're set as vma->vm_file - which is their main purpose - then they're
subject to regular refcount rules and vma->vm_file can't be installed
into an fdtable after having been set. All in all I don't see any need
for rcu delay here. So free it directly.
This all hinges on such hybrid beasts to never actually be installed
into fdtables which - as mentioned before - is not allowed. So add an
explicit WARN_ON_ONCE() so we catch any case where someone is suddenly
trying to install one of those things into a file descriptor table so we
can have a nice long chat with them.
Link: https://lore.kernel.org/r/20231005-sakralbau-wappnen-f5c31755ed70@brauner
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Readahead was factored to call generic_fadvise. That refactor added an
S_ISREG restriction which broke readahead on block devices.
In addition to S_ISREG, this change checks S_ISBLK to fix block device
readahead. There is no change in behavior with any file type besides block
devices in this change.
Fixes: 3d8f761531 ("vfs: implement readahead(2) using POSIX_FADV_WILLNEED")
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Link: https://lore.kernel.org/r/20231003015704.2415-1-reubenhwk@gmail.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
While valid we don't need to open-code rcu dereferences if we're
acquiring file_lock anyway.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231010030615.GO800259@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
In recent discussions around some performance improvements in the file
handling area we discussed switching the file cache to rely on
SLAB_TYPESAFE_BY_RCU which allows us to get rid of call_rcu() based
freeing for files completely. This is a pretty sensitive change overall
but it might actually be worth doing.
The main downside is the subtlety. The other one is that we should
really wait for Jann's patch to land that enables KASAN to handle
SLAB_TYPESAFE_BY_RCU UAFs. Currently it doesn't but a patch for this
exists.
With SLAB_TYPESAFE_BY_RCU objects may be freed and reused multiple times
which requires a few changes. So it isn't sufficient anymore to just
acquire a reference to the file in question under rcu using
atomic_long_inc_not_zero() since the file might have already been
recycled and someone else might have bumped the reference.
In other words, callers might see reference count bumps from newer
users. For this reason it is necessary to verify that the pointer is the
same before and after the reference count increment. This pattern can be
seen in get_file_rcu() and __files_get_rcu().
In addition, it isn't possible to access or check fields in struct file
without first aqcuiring a reference on it. Not doing that was always
very dodgy and it was only usable for non-pointer data in struct file.
With SLAB_TYPESAFE_BY_RCU it is necessary that callers first acquire a
reference under rcu or they must hold the files_lock of the fdtable.
Failing to do either one of this is a bug.
Thanks to Jann for pointing out that we need to ensure memory ordering
between reallocations and pointer check by ensuring that all subsequent
loads have a dependency on the second load in get_file_rcu() and
providing a fixup that was folded into this patch.
Cc: Jann Horn <jannh@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Failed opens (mostly ENOENT) legitimately happen a lot, for example here
are stats from stracing kernel build for few seconds (strace -fc make):
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ------------------
0.76 0.076233 5 15040 3688 openat
(this is tons of header files tried in different paths)
In the common case of there being nothing to close (only the file object
to free) there is a lot of overhead which can be avoided.
This is most notably delegation of freeing to task_work, which comes
with an enormous cost (see 021a160abf ("fs: use __fput_sync in
close(2)" for an example).
Benchmarked with will-it-scale with a custom testcase based on
tests/open1.c, stuffed into tests/openneg.c:
[snip]
while (1) {
int fd = open("/tmp/nonexistent", O_RDONLY);
assert(fd == -1);
(*iterations)++;
}
[/snip]
Sapphire Rapids, openneg_processes -t 1 (ops/s):
before: 1950013
after: 2914973 (+49%)
file refcount is checked as a safety belt against buggy consumers with
an atomic cmpxchg. Technically it is not necessary, but it happens to
not be measurable due to several other atomics which immediately follow.
Optmizing them away to make this atomic into a problem is left as an
exercise for the reader.
v2:
- unexport fput_badopen and move to fs/internal.h
- handle the refcount with cmpxchg, adjust commentary accordingly
- tweak the commit message
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20230926162228.68666-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Because 'inode' is being initialised before checking if 'dentry' is negative
it looks like an extra iput() on 'inode' may happen since the ihold() is
done only if the dentry is *not* negative. In reality this doesn't happen
because d_is_negative() is never true if ->d_inode is NULL. This patch only
makes the code easier to understand, as I was initially mislead by it.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20230928152341.303-1-lhenriques@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct watch_filter.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: David Howells <dhowells@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Siddh Raman Pant <code@siddh.me>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qian Cai <cai@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Message-Id: <20230922175407.work.754-kees@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If there is no watch_queue, holding the pipe mutex is enough to
prevent concurrent writes, and we can avoid the spinlock.
O_NOTIFICATION_QUEUE is an exotic and rarely used feature, and of all
the pipes that exist at any given time, only very few actually have a
watch_queue, therefore it appears worthwile to optimize the common
case.
This patch does not optimize pipe_resize_ring() where the spinlocks
could be avoided as well; that does not seem like a worthwile
optimization because this function is not called often.
Related commits:
- commit 8df441294d ("pipe: Check for ring full inside of the
spinlock in pipe_write()")
- commit b667b86734 ("pipe: Advance tail pointer inside of wait
spinlock in pipe_read()")
- commit 189b0ddc24 ("pipe: Fix missing lock in pipe_resize_ring()")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-4-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit 8df441294d ("pipe: Check for ring full inside of
the spinlock in pipe_write()") which was obsoleted by commit
c73be61ced ("pipe: Add general notification queue support") because
now pipe_write() fails early with -EXDEV if there is a watch_queue.
Without a watch_queue, no notifications can be posted to the pipe and
mutex protection is enough, as can be seen in splice_pipe_to_pipe()
which does not use the spinlock either.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-3-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This declutters the code by reducing the number of #ifdefs and makes
the watch_queue checks simpler. This has no runtime effect; the
machine code is identical.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-2-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This has no effect on 64 bit because there are 10 32-bit integers
surrounding the two bools, but on 32 bit architectures, this reduces
the struct size by 4 bytes by merging the two bools into one word.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-1-max.kellermann@ionos.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
SB_POSIXACL must be set when a filesystem supports POSIX ACLs, but NFSv4
also sets this flag to prevent the VFS from applying the umask on
newly-created files. NFSv4 doesn't support POSIX ACLs however, which
causes confusion when other subsystems try to test for them.
Add a new SB_I_NOUMASK flag that allows filesystems to opt-in to umask
stripping without advertising support for POSIX ACLs. Set the new flag
on NFSv4 instead of SB_POSIXACL.
Also, move mode_strip_umask to namei.h and convert init_mknod and
init_mkdir to use it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230911-acl-fix-v3-1-b25315333f6c@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Given a wrong root device, current log may not give the pretty name
which is useful to locate root cause.
For example, there are 2 blk devs in a VM, /dev/vda which has 2 partitials
/dev/vda1 and /dev/vda2 and /dev/vdb which is blank. /dev/vda2 is the
right root dev. When set "root=/dev/vdb", we get error log:
[ 0.635575] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,16)
It's not straightforward to find out the root cause as there is lack of
the root devive name therefore hard for people to get those info from the
device number, in the example, (254,16).
It is more comprehensive way to hint the root cause if pretty name is
given here, like:
[ 0.559887] Kernel panic - not syncing: VFS: Unable to mount root fs on "/dev/vdb" or unknown-block(254,16)
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Message-Id: <20230907091025.3436878-1-jianyong.wu@arm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add PM ops for Suspend to Idle. When the system suspended,
the Ethernet Serdes's clock will be stopped. So, this driver needs
to re-initialize the Ethernet Serdes by phy_init() in
renesas_eth_sw_resume(). Otherwise, timeout happened in phy_power_on().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Array index should not be negative, so modify the condition of
rswitch_for_each_enabled_port_continue_reverse() macro, and then
use unsigned int instead.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Powkiddy RGB30 has no onboard UART header, so remove the reference
to it in the device tree. This was left on by mistake in the initial
commit.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Set the VPLL frequency for the RGB30 to 292.5MHz to support running
the 720x720 display panel at 59.97hz. Without this change, the panel
runs at 59.08hz.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
After a discussion about removing VLYNQ support from the Kernel, it was
concluded that its only user, the AR7 platform can go [1]. Even OpenWRT
has removed support because these devices are "stuck with 3.18" [2].
[1] https://lore.kernel.org/r/3395161f-2543-46f0-83d9-b918800305e1@gmail.com
[2] https://openwrt.org/docs/techref/targets/ar7
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its watchdog
support. This allows us to remove the platform because this driver
includes a platform specific header.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are no users with a vlynq_driver in the Kernel tree. Also, only
the AR7 platform ever initialized a VLYNQ bus, but AR7 is going to be
removed from the Kernel. OpenWRT had some out-of-tree drivers which they
probably intended to upport, but AR7 devices are even there not
supported anymore because they are "stuck with Kernel
3.18" [1]. This code can go.
[1] https://openwrt.org/docs/techref/targets/ar7
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its support for
MTD.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its type
definition from 8250 code. As with previous removals, I checked with
Debian Code Search that 'PORT_AR7' is not used in userspace.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
ReiserFS has been deprecated for a year and a half, yet is still built
as part of a defconfig kernel.
According to commit eb103a5164 ("reiserfs: Deprecate reiserfs"), the
filesystem is slated to be removed in 2025. Remove it from the defconfig
profiles now, as part of its deprecation process.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
arch/mips/pci/fixup-lantiq.c requires nothing from <linux/of_irq.h>, so
remove the include of it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After bbd8810d39 ("PCI: Remove unused includes and superfluous struct
declaration"), <linux/of_pci.h> no longer includes <linux/pci.h>, which
provides the extern declarations for pcibios_plat_dev_init() and
pcibios_map_irq() via <asm/pci.h>.
This results in these new warnings:
arch/mips/pci/fixup-lantiq.c:13:5: warning: no previous prototype for 'pcibios_plat_dev_init' [-Wmissing-prototypes]
arch/mips/pci/fixup-lantiq.c:24:5: warning: no previous prototype for 'pcibios_map_irq' [-Wmissing-prototypes]
Include <linux/pci.h> directly to get these declarations.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070445.tzRBNYRC-lkp@intel.com/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 411740f542 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
old_pte is no longer used in kvm_mips_map_page(). So remove it to fix a
build warning about variable set but not used:
arch/mips/kvm/mmu.c: In function 'kvm_mips_map_page':
>> arch/mips/kvm/mmu.c:701:29: warning: variable 'old_pte' set but not used [-Wunused-but-set-variable]
701 | pte_t *ptep, entry, old_pte;
| ^~~~~~~
Cc: stable@vger.kernel.org
Fixes: 411740f542 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070530.aARZCSfh-lkp@intel.com/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Because group consistency is non-atomic between parent (filedesc) and children
(inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum
non-matching counter groups -- with non-sensical results.
Add group_generation to distinguish the case where a parent group removes and
adds an event and thus has the same number, but a different configuration of
events as inherited groups.
This became a problem when commit fa8c269353 ("perf/core: Invert
perf_read_group() loops") flipped the order of child_list and sibling_list.
Previously it would iterate the group (sibling_list) first, and for each
sibling traverse the child_list. In this order, only the group composition of
the parent is relevant. By flipping the order the group composition of the
child (inherited) events becomes an issue and the mis-match in group
composition becomes evident.
That said; even prior to this commit, while reading of a group that is not
equally inherited was not broken, it still made no sense.
(Ab)use ECHILD as error return to indicate issues with child process group
composition.
Fixes: fa8c269353 ("perf/core: Invert perf_read_group() loops")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net
Provide helpers for accessing I/O memory in a helper module. The fbdev
core uses these helpers, so select the module unconditionally for fbdev.
Drivers will later be able to select the module individually and the
helpers will become optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-2-tzimmermann@suse.de
Enabling KASAN and running some iperf tests raises some memory issues with
vmm_table:
BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4
Write of size 4 at addr c3a61540 by task wlan0-tx/95
KASAN detects that we are writing data beyond range allocated to vmm_table.
There is indeed a mismatch between the size passed to allocator in
wilc_wlan_init, and the range of possible indexes used later: allocation
size is missing a multiplication by sizeof(u32)
Fixes: 40b717bfce ("wifi: wilc1000: fix DMA on stack objects")
Cc: stable@vger.kernel.org
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
