Remove set df cstate as disallow df state is
not required for SMUv13.0.6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move definition of package type to amdgpu_smuio header and add new
package types for CEM and OAM.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below:
ERROR: Macros with complex values should be enclosed in parentheses
WARNING: macros should not use a trailing semicolon
+#define amdgpu_inc_vram_lost(adev) atomic_inc(&((adev)->vram_lost_counter));
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch implements partial migration in gpu page fault according to migration
granularity(default 2MB) and not split svm range in cpu page fault handling.
A svm range may include pages from both system ram and vram of one gpu now.
These chagnes are expected to improve migration performance and reduce mmu
callback and TLB flush workloads.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fpu_recursion_depth counter is used to ensure that dc_fpu_begin()
can be invoked multiple times while the FPU-disable function itself is
only invoked once. Also the counter part (dc_fpu_end()) is ballanced
properly.
Instead of using the get_cpu_ptr() dance around the inc it is simpler to
increment the per-CPU variable directly. Also the per-CPU variable has
to be incremented and decremented on the same CPU. This is ensured by
the inner-part which disables preemption. This is kind of not obvious,
works and the preempt-counter is touched a few times for no reason.
Disable preemption before incrementing fpu_recursion_depth for the first
time. Keep preemption disabled until dc_fpu_end() where the counter is
decremented making it obvious that the preemption has to stay disabled
while the counter is non-zero.
Use simple inc/dec functions.
Remove the nested preempt_disable/enable functions which are now not
needed.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a revert of the commit mentioned below while it is not wrong, as
in the kernel will explode, having migrate_disable() here it is
complete waste of resources.
Additionally commit message is plain wrong the review tag does not make
it any better. The migrate_disable() interface has a fat comment
describing it and it includes the word "undesired" in the headline which
should tickle people to read it before using it.
Initially I assumed it is worded too harsh but now I beg to differ.
The reviewer of the original commit, even not understanding what
migrate_disable() does should ask the following:
- migrate_disable() is added only to the CONFIG_X86 block and it claims
to protect fpu_recursion_depth. Why are the other the architectures
excluded?
- migrate_disable() is added after fpu_recursion_depth was modified.
Shouldn't it be added before the modification or referencing takes
place?
Moving on.
Disabling preemption DOES prevent CPU migration. A task, that can not be
pushed away from the CPU by the scheduler (due to disabled preemption)
can not be pushed or migrated to another CPU.
Disabling migration DOES NOT ensure consistency of per-CPU variables. It
only ensures that the task acts always on the same per-CPU variable. The
task remains preemptible meaning multiple tasks can access the same
per-CPU variable. This in turn leads to inconsistency for the statement
*pcpu -= 1;
with two tasks on one CPU and a preemption point during the RMW
operation:
Task A Task B
read pcpu to reg # 0
inc reg # 0 -> 1
read pcpu to reg # 0
inc reg # 0 -> 1
write reg to pcpu # 1
write reg to pcpu # 1
At the end pcpu reads 1 but should read 2 instead. Boom.
get_cpu_ptr() already contains a preempt_disable() statement. That means
that the per-CPU variable can only be referenced by a single task which
is currently running. The only inconsistency that can occur if the
variable is additionally accessed from an interrupt.
Remove migrate_disable/enable() from dc_fpu_begin/end().
Cc: Tianci Yin <tianci.yin@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Fixes: 0c316556d1 ("drm/amd/display: Disable migration to ensure consistency of per-CPU variable")
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct typos of "occurred".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't update the fault cache if status is 0. In the multiple
fault case, subsequent faults will return a 0 status which is
useless for userspace and replaces the useful fault status, so
only update if status is non-0.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the nsleep-lat test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the posix_timers test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
As part of this fix the printing of diagnostics in the unlikely event that
the pthread APIs fail, these were using perror() but the API functions
directly return an error code instead of setting errno.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the execveat test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
The main trick with this is that, being an exec() related test, the
program executes itself and returns specific exit codes to verify
success meaning that we need to only use the top level kselftest
header/summary functions when invoked directly rather than when run as
part of a test.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The standard library perror() function provides a convenient way to print
an error message based on the current errno but this doesn't play nicely
with KTAP output. Provide a helper which does an equivalent thing in a KTAP
compatible format.
nolibc doesn't have a strerror() and adding the table of strings required
doesn't seem like a good fit for what it's trying to do so when we're using
that only print the errno.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As a general rule, the name of the selftest is printed at the beginning
of every message.
Use "static_keys" (name of the test itself) consistently instead of mixing
"static_key" and "static_keys" at the beginning of the messages in the
test_static_keys script.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The ret variable is used to check function return values and assigning
values to it on error has no effect as it is an unused value.
The current implementation uses an additional variable (fret) to return
the error value, which in this case is unnecessary and lead to the above
described misuse. There is no restriction in the current implementation
to always return -1 on error and the actual negative error value can be
returned safely without storing -1 in a specific variable.
Simplify the error checking by using a single variable which always
holds the returned value.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some kselftests has a per-arch config,
e.g. tools/testing/selftests/bpf/config.s390x.
Make sure these configs are picked up by the kselftest-merge target.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kselftest-merge target walks all kselftests configs, and merges
them. However, builtin does not have precedence over modules. This
breaks some of the tests, e.g.:
$ grep CONFIG_NF_NAT tools/testing/selftests/{bpf,net}/config
tools/testing/selftests/bpf/config:CONFIG_NF_NAT=y
tools/testing/selftests/net/config:CONFIG_NF_NAT=m
Here, the net config will set NF_NAT to module, which makes it clunky
to run the BPF tests.
Add '-y' to scripts/kconfig/merge_config.sh.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
dmabuf-heaps builds a dmabuf-heap binary that can be ignored by git.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
tdx builds a tdx_guest_test binary that can be ignored by git.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
user_events builds a series of binaries that can be ignored by git.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When cpufreq's policy is 'single', there is a scenario that will
cause sg_policy's next_freq to be unable to update.
When the CPU's util is always max, the cpufreq will be max,
and then if we change the policy's scaling_max_freq to be a
lower freq, indeed, the sg_policy's next_freq need change to
be the lower freq, however, because the cpu_is_busy, the next_freq
would keep the max_freq.
For example:
The cpu7 is a single CPU:
unisoc:/sys/devices/system/cpu/cpufreq/policy7 # while true;do done& [1] 4737
unisoc:/sys/devices/system/cpu/cpufreq/policy7 # taskset -p 80 4737
pid 4737's current affinity mask: ff
pid 4737's new affinity mask: 80
unisoc:/sys/devices/system/cpu/cpufreq/policy7 # cat scaling_max_freq
2301000
unisoc:/sys/devices/system/cpu/cpufreq/policy7 # cat scaling_cur_freq
2301000
unisoc:/sys/devices/system/cpu/cpufreq/policy7 # echo 2171000 > scaling_max_freq
unisoc:/sys/devices/system/cpu/cpufreq/policy7 # cat scaling_max_freq
2171000
At this time, the sg_policy's next_freq would stay at 2301000, which
is wrong.
To fix this, add a check for the ->need_freq_update flag.
[ mingo: Clarified the changelog. ]
Co-developed-by: Guohua Yan <guohua.yan@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Guohua Yan <guohua.yan@unisoc.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230719130527.8074-1-xuewen.yan@unisoc.com
Marc Kleine-Budde <mkl@pengutronix.de> says:
This series first introduces the can_state_get_by_berr_counter()
helper function. It returns the current TX and RX state depending on
the provided CAN bit error counters. It will be later used by the
at91_can driver.
The remaining patches of this series first clean up the at91_can
driver, clean up the bus- and line error (including bus-off) handling,
and then convert it use the rx_offload helper. The driver works better
under high system load and the order of received CAN frames is better
maintained.
Due to a hardware limitation the converted driver could trigger a race
condition in the can_restart() CAN bus-off handler. The patch series
[1] fixes the issue.
[1] https://lore.kernel.org/all/20231005-can-dev-fix-can-restart-v2-0-91b5c1fd922c@pengutronix.de
Changes in v2:
- 1/27: can_state_err_to_state(): use symbolic error values instead of
plain numbers (Thanks Vincent)
- 27/27: fix patch description and typos (Thanks Vincent)
- Link to v1: https://lore.kernel.org/all/20231004-at91_can-rx_offload-v1-0-c32bf99097db@pengutronix.de
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-0-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The current at91_can driver uses NAPI to handle RX'ed CAN frames, the
RX IRQ is disabled and a NAPI poll is scheduled. Then in
at91_poll_rx() the RX'ed CAN frames are tried to read in order from
the device.
This approach has 2 drawbacks:
- Under high system load it might take too long from the initial RX
IRQ to the NAPI poll function to run. This causes RX buffer
overflows.
- The algorithm to read the CAN frames in order is not bullet proof
and may fail under certain use cases/system loads.
The rx-offload helper fixes these problems by reading the RX'ed CAN
frames in the interrupt handler and adding it to a list sorted by RX
timestamp. This list of RX'ed SKBs is then passed to the networking
stack via NAPI.
Convert the RX path to rx-offload, pass all CAN error frames with
can_rx_offload_queue_timestamp().
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-27-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This is a preparation patch to convert the driver to make use of the
rx-offload helper. With rx-offload the received CAN frames are sorted
by their timestamp. Regular CAN RX'ed and TX'ed CAN frames are
timestamped by the hardware. Error events are not.
Introduce a new function at91_alloc_can_err_skb() the allocates an
error SKB and reads the current timestamp from the controller.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-26-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since 3e5c291c79 ("can: add CAN_ERR_CNT flag to notify availability
of error counter") there is a dedicated flag to inform the user space,
that there are CAN error counters in the CAN error frame.
In case the device is not in bus off mode, send the error counters to
user space and set CAN_ERR_CNT.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-25-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver implements a hand crafted CAN state handling. Update the
driver to make use of can_change_state(), introduced in ("can: dev:
Consolidate and unify state change handling")
Also switch from hand crafted CAN bus off handling to can_bus_off():
In case of a bus off, abort all pending TX requests, switch off the
device and let can_bus_off() handle the device restart.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-24-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The at91 CAN controller automatically recovers from bus-off after 128
occurrences of 11 consecutive recessive bits.
After an auto-recovered bus-off, the error counters no longer reflect
this fact. On the sam9263 the state bits in the SR register show the
current state (based on the current error counters), while on sam9x5
and newer SoCs these bits are latched.
Take any latched bus-off information from the SR register into account
when calculating the CAN new state, to start the standard CAN bus off
handling.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-23-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On the sam9263 the SR bits for bus off, error passive, warning limit,
and error active are not latched and reflect the current status of the
controller. On the sam9x5 and newer SoCs these bits are latched.
To simplify the code, use can_state_get_by_berr_counter() to get the
state of the controller regardless of the SoC version.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-22-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This is a preparation patch to convert the driver to the rx-offload
helper. In rx-offload RX, TX-done and CAN error handling are done in
the IRQ handler, SKB are pushed to the network stack in the NAPI poll
function.
Move the CAN frame error handling from the NAPI function at91_poll()
to the IRQ handler at91_poll(). To reflect this change, rename
at91_poll_err() to at91_irq_err_frame().
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-19-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
at91_poll_err() allocates a can error SKB, to inform the user space
about the CAN error. Then it fills the SKB with information the error
information and increases the net device error stats.
In case no SBK can be allocated (e.g. due to an OOM) or the NAPI quota
is 0 the function is left early and no stats are updated. This is not
helpful to the user, as there is no information about the faulty CAN
bus.
Increase the error stats even if no quota is left or no SKB can be
allocated.
While there treat No-Acknowledgment as a bus error, too.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-18-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In at91_chip_start() first all IRQs are disabled, they do not have to
be disabled again at the end of the function before the requested IRQs
are enabled.
Remove the 2nd disable of all IRQs at the end of the function.
Link: https://lore.kernel.org/all/20231005-at91_can-rx_offload-v2-14-9987d53600e0@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
