The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-19-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-18-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-17-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-16-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230927081040.2198742-15-u.kleine-koenig@pengutronix.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct irq_domain.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175127.work.214-kees@kernel.org
Convert list_for_each() to list_for_each_entry() where applicable.
No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230919170409.1581074-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Newer Thinkpads have a feature called MAC Address Pass-through.
This patch provides a sysfs interface that userspace can use
to get this auxiliary mac address.
Signed-off-by: Fernando Eckhardt Valle <fevalle@ipt.br>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230926202144.5906-1-fevalle@ipt.br
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The assignment of the else and if branches is the same, so the else
here is redundant, so we remove it.
./sound/soc/codecs/cs42l43-sdw.c:35:1-3: WARNING: possible condition with no effect (if == else).
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6712
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230928085200.48635-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recompute the state of all CRTCs on an FDI link during a modeset that
may be affected by the modeset of other CRTCs on the same link. This
ensures that each CRTC on the link maximizes its BW use (after another
CRTC is disabled).
In practice this means recomputing pipe B's config on IVB if pipe C gets
disabled.
v2:
- Add the change recomputing affected CRTC states in a separate patch.
(Ville)
v3: (Ville)
- Constify old and new crtc states.
- Check for fused off pipe C.
- Fix new vs. old crtc state mixup.
- Drop check for pipe C's enabled state.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-12-imre.deak@intel.com
At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI
lanes. Make the BW sharing more dynamic by trying to reduce pipe B's
link bpp in this case, until pipe B uses only up to 2 FDI lanes.
For this instead of the encoder compute config retry loop - which
reduced link bpp only for the encoder's pipe - reduce the maximum link
bpp for pipe B/C as required after all CRTC states are computed and
recompute the CRTC states with the new bpp limit.
Atm, all FDI encoder's compute config function returns an error if a BW
constrain prevents increasing the pipe bpp value. The corresponding
crtc_state->bw_constrained check can be replaced with checking
crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an
exception where this case is only handled in the outer config retry
loop, failing the modeset with a WARN, add a FIXME comment to handle
this in the encoder code similarly to other encoders.
v2:
- Don't assume that a CRTC is already in the atomic state, while
reducing its link bpp.
- Add DocBook description to intel_fdi_atomic_check_link().
v3:
- Enable BW management for FDI links in a separate patch. (Ville)
v4: (Ville)
- Fail the SDVO encoder config computation if it doesn't support the
link bpp limit.
- Add TODO: comments about checking link_bpp_x16 instead of
bw_constrained.
v5:
- Replace link bpp limit check with a FIXME: comment in
intel_sdvo_compute_config(). (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Amended commit message wrt. changes in v5]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-11-imre.deak@intel.com
At the moment a modeset fails if the config computation of a pipe can't
fit its required BW to the available link BW even though the limitation
may be resolved by reducing the BW requirement of other pipes.
To improve the above this patch adds helper functions checking the
overall BW limits after all CRTC states have been computed. If the check
fails the maximum link bpp for a selected pipe will be reduced and all
the CRTC states will be recomputed until either the overall BW limit
check passes, or further bpp reduction is not possible (because all
pipes/encoders sharing the link BW reached their minimum link bpp).
Atm, the MST encoder allocates twice the required BW for YUV420 format
streams. A follow-up patchset will fix that, add a code comment about
this.
This change prepares for upcoming patches enabling the above BW
management on FDI and MST links.
v2:
- Rename intel_crtc_state::max_link_bpp to max_link_bpp_x16 and
intel_link_bw_limits::max_bpp to max_bpp_x16. (Jani)
v3:
- Add the helper functions in a separate patch. (Ville)
- Add the functions to intel_link_bw.c instead of intel_atomic.c (Ville)
- Return -ENOSPC instead of -EINVAL to userspace in case of a link BW
limit failure.
v4:
- Make intel_atomic_check_config() static.
v5: (Ville)
- Rename intel_link_bw_limits::min_bpp_pipes to min_bpp_reached_pipes
and intel_link_bw_reset_pipe_limit_to_min() to
intel_link_bw_set_min_bpp_for_pipe().
- Rename pipe_bpp to link_bpp in intel_link_bw_reduce_bpp().
- Add FIXME: comment about MST encoder's YUV420 BW allocation and
tracking the link bpp limit accordingly.
v6:
- Move intel_link_bw_compute_pipe_bpp() to intel_fdi.c (Ville)
- WARN_ON(BIT(pipe) & min_bpp_reached_pipes) in
intel_link_bw_set_bpp_limit_for_pipe(). (Ville)
- Rename intel_link_bw_set_min_bpp_for_pipe() to
intel_link_bw_set_bpp_limit_for_pipe() and
intel_link_bw_limits::min_bpp_reached_pipes to
bpp_limit_reached_pipes. (Ville)
- Remove unused header includes.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-10-imre.deak@intel.com
Factor out intel_atomic_check_config() to check and compute all the CRTC
states. This will be used by a follow up patch to recompute/check the
state until required by BW limitations between CRTCs.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-9-imre.deak@intel.com
Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late() to
clarify when the function can be called (vs.
intel_modeset_pipes_in_mask_early()).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-8-imre.deak@intel.com
Add intel_modeset_pipes_in_mask_early() to modeset a provided set of
pipes, used in a follow-up patch.
As opposed to intel_modeset_all_pipes() which modesets only the active
pipes - others don't requiring programming the HW - modeset all enabled
pipes in intel_modeset_pipes_in_mask_early() which may need to recompute
their state even if they are not active (that is in the DPMS off state).
While at it add DocBook descriptions for the two exported functions.
v2:
- Add a flag controlling if active planes are force updated as well.
- Add DockBook descriptions.
v3:
- For clarity use _early/_late suffixes for the exported functions
instead of the update_active_planes parameter. (Ville)
v4:
- In intel_modeset_pipes_in_mask_early() update only the crtc
flags relevant to the early phase. (Ville)
- Rename intel_modeset_all_pipes() in a separate patch.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-7-imre.deak@intel.com
Limit the output link bpp in DSC mode to the link_config_limits
link.min_bpp_x16 .. max_bpp_x16 range the same way it's done in non-DSC
mode. Atm this doesn't make a difference, the link bpp range being
0 .. max pipe bpp, but a follow-up patch will need a way to reduce max
link bpp below its current value.
v2:
- Add to_bpp_int_roundup() instead of open coding it. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-6-imre.deak@intel.com
In non-DSC mode the link bpp can be set in 2*3 bpp steps in the pipe bpp
range, while in DSC mode it can be set in 1/16 bpp steps to any value
up to the maximum pipe bpp. Update the limits accordingly in both modes
to prepare for a follow-up patch which may need to reduce the max link
bpp value and starts to check the link bpp limits in DSC mode as well.
While at it add more detail to the link limit debug print and print it
also for DSC mode.
v2:
- Add to_bpp_frac_dec() instead of open coding it. (Jani)
v3: (Ville)
- Add BPP_X16_FMT / BPP_X16_ARG.
- Add TODO: comment about initializing the DSC link bpp limits earlier.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-5-imre.deak@intel.com
Computing the non-DSC mode link config is redundant once it's determined
that DSC will be needed, so skip computing it. In a follow-up patch this
simplifies setting the link limits which are dependent on the DSC vs.
non-DSC mode.
While at it sanitize the debug print about the MST DSC fallback path,
making it similar to the SST DSC one.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-4-imre.deak@intel.com
A follow-up patch will need to limit the output link bpp both in the
non-DSC and DSC configuration, so track the pipe and link bpp limits
separately in the link_config_limits struct.
Use .4 fixed point format for link bpp matching the 1/16 bpp granularity
in DSC mode and for now keep this limit matching the pipe bpp limit.
v2: (Jani)
- Add to_bpp_int(), to_bpp_x16() helpers instead of opencoding them.
- Rename link_config_limits::link.min/max_bpp to min/max_bpp_x16.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-3-imre.deak@intel.com
Factor out helpers that DP / DP_MST encoders can use to compute the link
rate/lane count and bpp limits. A follow-up patch will call these to
recalculate the limits if DSC compression is required.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-2-imre.deak@intel.com
Make drm_bridge_get_edid() the one place to call the hook.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914131450.2473061-2-jani.nikula@intel.com
Make drm_bridge_get_edid() the one place to call the hook.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230914131450.2473061-1-jani.nikula@intel.com
We've had a number of times when a patch slipped through and we couldn't
pick them up either because our MAINTAINERS entry only covers the
framework and thus we weren't Cc'd.
Let's take another approach where we match everything, and remove all
the drivers that are not maintained through drm-misc.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921105743.2611263-1-mripard@kernel.org
Use -std=gnu11 for consistency with main kernel code.
It doesn't seem to change anything in vmlinux.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lore.kernel.org/r/2058761e-12a4-4b2f-9690-3c3c1c9902a5@p183
idxd sub-drivers belong to bus dsa_bus_type. Thus, dsa_bus_type must be
registered in dsa bus init before idxd drivers can be registered.
But the order is wrong when both idxd and idxd_bus are builtin drivers.
In this case, idxd driver is compiled and linked before idxd_bus driver.
Since the initcall order is determined by the link order, idxd sub-drivers
are registered in idxd initcall before dsa_bus_type is registered
in idxd_bus initcall. idxd initcall fails:
[ 21.562803] calling idxd_init_module+0x0/0x110 @ 1
[ 21.570761] Driver 'idxd' was unable to register with bus_type 'dsa' because the bus was not initialized.
[ 21.586475] initcall idxd_init_module+0x0/0x110 returned -22 after 15717 usecs
[ 21.597178] calling dsa_bus_init+0x0/0x20 @ 1
To fix the issue, compile and link idxd_bus driver before idxd driver
to ensure the right registration order.
Fixes: d9e5481fca ("dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone")
Reported-by: Michael Prinke <michael.prinke@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Tested-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20230924162232.1409454-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add rate limit to the dev_warn() call in the misc interrupt thread. This
limits dmesg getting spammed if a descriptor submitter is spamming bad
descriptors with invalid completion records and resulting the errors being
continuously reported by the misc interrupt handling thread.
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20230924002347.1117757-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pedro Tammela says:
====================
selftests/tc-testing: parallel tdc
As the number of tdc tests is growing, so is our completion wall time.
One of the ideas to improve this is to run tests in parallel, as they
are self contained.
This series allows for tests to run in parallel, in batches of 32 tests.
Not all tests can run in parallel as they might conflict with each other.
The code will still honor this requirement even when trying to run the
tests over the worker pool.
In order to make this happen we had to localize the test resources
(patches 1 and 2), where instead of having all tests sharing one single
namespace and veths devices each test now gets it's own local namespace and devices.
Even though the tests serialize over rtnl_lock in the kernel, we
measured a speedup of about 3x in a test VM.
====================
Link: https://lore.kernel.org/r/20230919135404.1778595-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the documentation to reflect the changes made to tdc with regards
to minimal requirements and test definitions expectations.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use a Python process pool to run the tests in parallel.
Not all tests can run in parallel, for instance tests that are not
namespaced and tests that use netdevsim, as they can conflict with one
another.
The code logic will split the tests into serial and parallel.
For the parallel tests, we build batches of 32 tests and queue each
batch on the process pool. For the serial tests, they are queued as a
whole into the process pool, which in turn executes them concurrently
with the parallel tests.
Even though the tests serialize on rtnl_lock in the kernel, this feature
showed results with a ~3x speedup on the wall time for the entire test suite
running in a VM:
Before - 4m32.502s
After - 1m19.202s
Examples:
In order to run tdc using 4 processes:
./tdc.py -J4 <...>
In order to run tdc using 1 process:
./tdc.py -J1 <...> || ./tdc.py <...>
Note that the kernel configuration will affect the speed of the tests,
especially if such configuration slows down process creation and/or
fork().
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With resources localized on a per test basis, some tests definitions
either contain redundant commands, were wrong or could be simplified.
Update all of them to match the new requirements.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As of today, the current tdc architecture creates one netns and uses it
to run all tests. This assumption was embedded into the nsPlugin which
carried over as how the tests were written.
The tdc tests are by definition self contained and can,
theoretically, run in parallel. Even though in the kernel they will
serialize over the rtnl lock, we should expect a significant speedup of the
total wall time for the entire test suite, which is hitting close to
1100 tests at this point.
A first step to achieve this goal is to remove sharing of global resources like
veth/dummy interfaces and the netns. In this patch we 'localize' these
resources on a per test basis. Each test gets it's own netns, VETH/dummy interfaces.
The resources are spawned in the pre_suite phase, where tdc will prepare
all netns and interfaces for all tests. This is done in order to avoid
concurrency issues with netns / interfaces spawning and commands using
them. As tdc progresses, the resources are deleted after each test finishes
executing.
Tests that don't use the nsPlugin still run under the root namespace,
but are now required to manage any external resources like interfaces.
These cannot be parallelized as their definition doesn't allow it.
On the other hand, when using the nsPlugin, tests don't need to create
dummy/veth interfaces as these are handled already.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-60-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-59-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-58-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-57-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-56-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-55-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919133207.1400430-54-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
