nfsd4_encode_readv() uses xdr->buf->page_len as a starting point for
the nfsd_iter_read() sink buffer -- page_len is going to be offset
by the parts of the COMPOUND that have already been encoded into
xdr->buf->pages.
However, that value must be captured /before/
xdr_reserve_space_vec() advances page_len by the expected size of
the read payload. Otherwise, the whole front part of the first
page of the payload in the reply will be uninitialized.
Mantas hit this because sec=krb5i forces RQ_SPLICE_OK off, which
invokes the readv part of the nfsd4_encode_read() path. Also,
older Linux NFS clients appear to send shorter READ requests
for files smaller than a page, whereas newer clients just send
page-sized requests and let the server send as many bytes as
are in the file.
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Closes: https://lore.kernel.org/linux-nfs/f1d0b234-e650-0f6e-0f5d-126b3d51d1eb@gmail.com/
Fixes: 703d752155 ("NFSD: Hoist rq_vec preparation into nfsd_read() [step two]")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Mark attributes which are supposed to be arrays of nested attributes
with known content as such. Originally suggested for
NFTA_RULE_EXPRESSIONS only, but does apply to others as well.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Set netlink extended error reporting for several lookup functions which
allows userspace to infer what is the error cause.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Test that nat engine resolves the source port clash and tcp packet
is passed to the correct socket.
While at it, get rid of the iperf3 dependency, just use socat for
listener side too.
Signed-off-by: Florian Westphal <fw@strlen.de>
In commit 03a3ca37e4 ("netfilter: nf_nat: undo erroneous tcp edemux lookup")
I fixed a problem with source port clash resolution and DNAT.
A very similar issue exists with REDIRECT (DNAT to local address) and
port rewrites.
Consider two port redirections done at prerouting hook:
-p tcp --port 1111 -j REDIRECT --to-ports 80
-p tcp --port 1112 -j REDIRECT --to-ports 80
Its possible, however unlikely, that we get two connections sharing
the same source port, i.e.
saddr:12345 -> daddr:1111
saddr:12345 -> daddr:1112
This works on sender side because destination address is
different.
After prerouting, nat will change first syn packet to
saddr:12345 -> daddr:80, stack will send a syn-ack back and 3whs
completes.
The second syn however will result in a source port clash:
after dnat rewrite, new syn has
saddr:12345 -> daddr:80
This collides with the reply direction of the first connection.
The NAT engine will handle this in the input nat hook by
also altering the source port, so we get for example
saddr:13535 -> daddr:80
This allows the stack to send back a syn-ack to that address.
Reverse NAT during POSTROUTING will rewrite the packet to
daddr:1112 -> saddr:12345 again. Tuple will be unique on-wire
and peer can process it normally.
Problem is when ACK packet comes in:
After prerouting, packet payload is mangled to saddr:12345 -> daddr:80.
Early demux will assign the 3whs-completing ACK skb to the first
connections' established socket.
This will then elicit a challenge ack from the first connections'
socket rather than complete the connection of the second.
The second connection can never complete.
Detect this condition by checking if the associated sockets port
matches the conntrack entries reply tuple.
If it doesn't, then input source address translation mangled
payload after early demux and the found sk is incorrect.
Discard this sk and let TCP stack do another lookup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Currently, skbs generated by pktgen always have their reference count
incremented before transmission, causing their reference count to be
always greater than 1, leading to two issues:
1. Only the code paths for shared skbs can be tested.
2. In certain situations, skbs can only be released by pktgen.
To enhance testing comprehensiveness, we are introducing the "SHARED"
flag to indicate whether an SKB is shared. This flag is enabled by
default, aligning with the current behavior. However, disabling this
flag allows skbs with a reference count of 1 to be transmitted.
So we can test non-shared skbs and code paths where skbs are released
within the stack.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20230920125658.46978-2-liangchen.linux@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When specifying an unknown flag, it will print all available flags.
Currently, these flags are provided as fixed strings, which requires
manual updates when flags change. Replacing it with automated flag
enumeration.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20230920125658.46978-1-liangchen.linux@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use 'kstrtoul_from_user()' in 'ath11k_write_file_spectral_count()'
and 'ath11k_write_file_spectral_bins()'
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230824075121.121144-4-dmantipov@yandex.ru
There are examples in documentation for codec to codec connection.
However they show method before recent series of patches which renamed
the fields. Update documentation accordingly.
Fixes: 7ddc7f91be ("ASoC: soc.h: clarify Codec2Codec params")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230928134706.662947-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
programmable switching frequency to optimize efficiency.
The brightness can be controlled either by I2C commands (called "analog"
mode) or by a PWM input signal (PWM mode).
This driver supports both modes.
For device driver details, please refer to:
- drivers/video/backlight/mp3309c_bl.c
The datasheet is available at:
- https://www.monolithicpower.com/en/mp3309c.html
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230925122609.78849-1-f.suligoi@asem.it
Signed-off-by: Lee Jones <lee@kernel.org>
Pull in locking/core from the tip tree, to get the futex2 dependencies
from Peter Zijlstra.
* 'locking/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
futex: Propagate flags into get_futex_key()
futex: Add sys_futex_wait()
futex: FLAGS_STRICT
futex: Add sys_futex_wake()
futex: Validate futex value against futex size
futex: Flag conversion
futex: Extend the FUTEX2 flags
futex: Clarify FUTEX2 flags
asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()
futex/pi: Fix recursive rt_mutex waiter state
locking/rtmutex: Add a lockdep assert to catch potential nested blocking
locking/rtmutex: Use rt_mutex specific scheduler helpers
sched: Provide rt_mutex specific scheduler helpers
sched: Extract __schedule_loop()
locking/rtmutex: Avoid unconditional slowpath for DEBUG_RT_MUTEXES
...
* for-6.7/io_uring:
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
Misc updates for mlx5 driver
1) From Erez, Add support for multicast forwarding to multi destination
in bridge offloads with software steering mode (SMFS).
2) From Jianbo, Utilize the maximum aggregated link speed for police
action rate.
3) From Moshe, Add a health error syndrome for pci data poisoned
4) From Shay, Enable 4 ports multiport E-switch
5) From Jiri, Trivial SF code cleanup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmUKkiUACgkQSD+KveBX
+j6HnwgAgeK+RwWac/FRPmA0cKZmQQm8JXmaSYBkfDHl+F6IYjysxOGmEw9E6p96
Xmpw9DQxLdJ9Qm+qCPVSop5IhDObJBhMwbJV6QWuc47sgLPBxj/EVZxDeEDTobsZ
zjWVbdmpvUPnc3ktERszCmI5PLR/fsj2+gWuvj4m0tvDDO6SC7xp2QCs11AdfThn
jax7nE7YoOrJw4iUFD9FRFbRJwdmWKeYTQCj0ZJljAhYv33MIp95SYTe/NGgXRqK
ssZ7eDyCR3xP2DJdnO83VbcU79Dis3kcQP21HD2CjbN6nFMkFjqste/ArUcD16n1
Nf0SIOPj1PHOX4xOgly+iQL1bZRVpg==
=D/YM
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-09-19
Misc updates for mlx5 driver
1) From Erez, Add support for multicast forwarding to multi destination
in bridge offloads with software steering mode (SMFS).
2) From Jianbo, Utilize the maximum aggregated link speed for police
action rate.
3) From Moshe, Add a health error syndrome for pci data poisoned
4) From Shay, Enable 4 ports multiport E-switch
5) From Jiri, Trivial SF code cleanup
====================
Link: https://lore.kernel.org/r/20230920063552.296978-1-saeed@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
uring_cmd may never complete, such as ublk, in which uring cmd isn't
completed until one new block request is coming from ublk block device.
Add cancelable uring_cmd to provide mechanism to driver for cancelling
pending commands in its own way.
Add API of io_uring_cmd_mark_cancelable() for driver to mark one command as
cancelable, then io_uring will cancel this command in
io_uring_cancel_generic(). ->uring_cmd() callback is reused for canceling
command in driver's way, then driver gets notified with the cancelling
from io_uring.
Add API of io_uring_cmd_get_task() to help driver cancel handler
deal with the canceling.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Retain top 8bits of uring_cmd flags for kernel internal use, so that we
can move IORING_URING_CMD_POLLED out of uapi header.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge series from wangweidong.a@awinic.com:
The awinic aw87390 is a new high efficiency, low noise,
constant large volume, 6th Smart K audio amplifier.
Merge series from cy_huang@richtek.com:
This patch series create a TDM source select property and use it to
decide which TDM data source is connected.
Following by the below patch disccuion
https://lore.kernel.org/lkml/1695780376-32301-1-git-send-email-cy_huang@richtek.com/#t
It may not be a good choice to add the user controlable mixer control
item. Since it follows the board design, make it as a device property.
The 6 bytes length of the tries_buf string in ata_eh_link_report() is
too short and results in a gcc compilation warning with W-!:
drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’:
drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~
drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4]
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~
drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6
2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2372 | ap->eh_tries);
| ~~~~~~~~~~~~~
Avoid this warning by increasing the string size to 16B.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:
drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~
In function ‘ata_dev_config_ncq’,
inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2379 | ddepth, aa_desc);
| ~~~~~~~~~~~~~~~~
Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
If an error occurs when resuming a host adapter before the devices
attached to the adapter are resumed, the adapter low level driver may
remove the scsi host, resulting in a call to sd_remove() for the
disks of the host. This in turn results in a call to sd_shutdown() which
will issue a synchronize cache command and a start stop unit command to
spindown the disk. sd_shutdown() issues the commands only if the device
is not already runtime suspended but does not check the power state for
system-wide suspend/resume. That is, the commands may be issued with the
device in a suspended state, which causes PM resume to hang, forcing a
reset of the machine to recover.
Fix this by tracking the suspended state of a disk by introducing the
suspended boolean field in the scsi_disk structure. This flag is set to
true when the disk is suspended is sd_suspend_common() and resumed with
sd_resume(). When suspended is true, sd_shutdown() is not executed from
sd_remove().
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
libsas does its own domain based power management of ports. For such
ports, libata should not use a device type defining power management
operations as executing these operations for suspend/resume in addition
to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is
not necessary (and likely dangerous to do, even though problems are not
seen currently).
Introduce the new ata_port_sas_type device_type for ports managed by
libsas. This new device type is used in ata_tport_add() and is defined
without power management operations.
Fixes: 2fcbdcb4c8 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after
device resume") modified ata_scsi_dev_rescan() to check the scsi device
"is_suspended" power field to ensure that the scsi device associated
with an ATA device is fully resumed when scsi_rescan_device() is
executed. However, this fix is problematic as:
1) It relies on a PM internal field that should not be used without PM
device locking protection.
2) The check for is_suspended and the call to scsi_rescan_device() are
not atomic and a suspend PM event may be triggered between them,
casuing scsi_rescan_device() to be called on a suspended device and
in that function blocking while holding the scsi device lock. This
would deadlock a following resume operation.
These problems can trigger PM deadlocks on resume, especially with
resume operations triggered quickly after or during suspend operations.
E.g., a simple bash script like:
for (( i=0; i<10; i++ )); do
echo "+2 > /sys/class/rtc/rtc0/wakealarm
echo mem > /sys/power/state
done
that triggers a resume 2 seconds after starting suspending a system can
quickly lead to a PM deadlock preventing the system from correctly
resuming.
Fix this by replacing the check on is_suspended with a check on the
return value given by scsi_rescan_device() as that function will fail if
called against a suspended device. Also make sure rescan tasks already
scheduled are first cancelled before suspending an ata port.
Fixes: 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_rescan_device() takes a scsi device lock before executing a device
handler and device driver rescan methods. Waiting for the completion of
any command issued to the device by these methods will thus be done with
the device lock held. As a result, there is a risk of deadlocking within
the power management code if scsi_rescan_device() is called to handle a
device resume with the associated scsi device not yet resumed.
Avoid such situation by checking that the target scsi device is in the
running state, that is, fully capable of executing commands, before
proceeding with the rescan and bailout returning -EWOULDBLOCK otherwise.
With this error return, the caller can retry rescaning the device after
a delay.
The state check is done with the device lock held and is thus safe
against incoming suspend power management operations.
Fixes: 6aa0365a3c ("ata: libata-scsi: Avoid deadlock on rescan after device resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
The introduction of a device link to create a consumer/supplier
relationship between the scsi device of an ATA device and the ATA port
of that ATA device fixes the ordering of system suspend and resume
operations. For suspend, the scsi device is suspended first and the ata
port after it. This is fine as this allows the synchronize cache and
START STOP UNIT commands issued by the scsi disk driver to be executed
before the ata port is disabled.
For resume operations, the ata port is resumed first, followed
by the scsi device. This allows having the request queue of the scsi
device to be unfrozen after the ata port resume is scheduled in EH,
thus avoiding to see new requests prematurely issued to the ATA device.
Since libata sets manage_system_start_stop to 1, the scsi disk resume
operation also results in issuing a START STOP UNIT command to the
device being resumed so that the device exits standby power mode.
However, restoring the ATA device to the active power mode must be
synchronized with libata EH processing of the port resume operation to
avoid either 1) seeing the start stop unit command being received too
early when the port is not yet resumed and ready to accept commands, or
after the port resume process issues commands such as IDENTIFY to
revalidate the device. In this last case, the risk is that the device
revalidation fails with timeout errors as the drive is still spun down.
Commit 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
disabled issuing the START STOP UNIT command to avoid issues with it.
But this is incorrect as transitioning a device to the active power
mode from the standby power mode set on suspend requires a media access
command. The IDENTIFY, READ LOG and SET FEATURES commands executed in
libata EH context triggered by the ata port resume operation may thus
fail.
Fix these synchronization issues is by handling a device power mode
transitions for system suspend and resume directly in libata EH context,
without relying on the scsi disk driver management triggered with the
manage_system_start_stop flag.
To do this, the following libata helper functions are introduced:
1) ata_dev_power_set_standby():
This function issues a STANDBY IMMEDIATE command to transitiom a device
to the standby power mode. For HDDs, this spins down the disks. This
function applies only to ATA and ZAC devices and does nothing otherwise.
This function also does nothing for devices that have the
ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag
set.
For suspend, call ata_dev_power_set_standby() in
ata_eh_handle_port_suspend() before the port is disabled and frozen.
ata_eh_unload() is also modified to transition all enabled devices to
the standby power mode when the system is shutdown or devices removed.
2) ata_dev_power_set_active() and
This function applies to ATA or ZAC devices and issues a VERIFY command
for 1 sector at LBA 0 to transition the device to the active power mode.
For HDDs, since this function will complete only once the disk spin up.
Its execution uses the same timeouts as for reset, to give the drive
enough time to complete spinup without triggering a command timeout.
For resume, call ata_dev_power_set_active() in
ata_eh_revalidate_and_attach() after the port has been enabled and
before any other command is issued to the device.
With these changes, the manage_system_start_stop and no_start_on_resume
scsi device flags do not need to be set in ata_scsi_dev_config(). The
flag manage_runtime_start_stop is still set to allow the sd driver to
spinup/spindown a disk through the sd runtime operations.
Fixes: 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The underlying device and driver of a SCSI disk may have different
system and runtime power mode control requirements. This is because
runtime power management affects only the SCSI disk, while system level
power management affects all devices, including the controller for the
SCSI disk.
For instance, issuing a START STOP UNIT command when a SCSI disk is
runtime suspended and resumed is fine: the command is translated to a
STANDBY IMMEDIATE command to spin down the ATA disk and to a VERIFY
command to wake it up. The SCSI disk runtime operations have no effect
on the ata port device used to connect the ATA disk. However, for
system suspend/resume operations, the ATA port used to connect the
device will also be suspended and resumed, with the resume operation
requiring re-validating the device link and the device itself. In this
case, issuing a VERIFY command to spinup the disk must be done before
starting to revalidate the device, when the ata port is being resumed.
In such case, we must not allow the SCSI disk driver to issue START STOP
UNIT commands.
Allow a low level driver to refine the SCSI disk start/stop management
by differentiating system and runtime cases with two new SCSI device
flags: manage_system_start_stop and manage_runtime_start_stop. These new
flags replace the current manage_start_stop flag. Drivers setting the
manage_start_stop are modifed to set both new flags, thus preserving the
existing start/stop management behavior. For backward compatibility, the
old manage_start_stop sysfs device attribute is kept as a read-only
attribute showing a value of 1 for devices enabling both new flags and 0
otherwise.
Fixes: 0a85890559 ("ata,scsi: do not issue START STOP UNIT on resume")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no direct device ancestry defined between an ata_device and
its scsi device which prevents the power management code from correctly
ordering suspend and resume operations. Create such ancestry with the
ata device as the parent to ensure that the scsi device (child) is
suspended before the ata device and that resume handles the ata device
before the scsi device.
The parent-child (supplier-consumer) relationship is established between
the ata_port (parent) and the scsi device (child) with the function
device_add_link(). The parent used is not the ata_device as the PM
operations are defined per port and the status of all devices connected
through that port is controlled from the port operations.
The device link is established with the new function
ata_scsi_slave_alloc(), and this function is used to define the
->slave_alloc callback of the scsi host template of all ata drivers.
Fixes: a19a93e4c6 ("scsi: core: pm: Rely on the device driver core for async power management")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Whenever an ATA adapter driver is removed (e.g. rmmod),
ata_port_detach() is called repeatedly for all the adapter ports to
remove (unload) the devices attached to the port and delete the port
device itself. Removing of devices is done using libata EH with the
ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute
ata_eh_unload() which disables all devices attached to the port.
ata_port_detach() finishes by calling scsi_remove_host() to remove the
scsi host associated with the port. This function will trigger the
removal of all scsi devices attached to the host and in the case of
disks, calls to sd_shutdown() which will flush the device write cache
and stop the device. However, given that the devices were already
disabled by ata_eh_unload(), the synchronize write cache command and
start stop unit commands fail. E.g. running "rmmod ahci" with first
removing sd_mod results in error messages like:
ata13.00: disable device
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 0:0:0:0: [sda] Stopping disk
sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Fix this by removing all scsi devices of the ata devices connected to
the port before scheduling libata EH to disable the ATA devices.
Fixes: 720ba12620 ("[PATCH] libata-hp: update unload-unplug")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
The function ata_port_request_pm() checks the port flag
ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to
ensure that power management operations for a port are not scheduled
simultaneously. However, this flag check is done without holding the
port lock.
Fix this by taking the port lock on entry to the function and checking
the flag under this lock. The lock is released and re-taken if
ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking
that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first
call is racy and the second one done without holding the port lock.
Fixes: 5ef4108291 ("ata: add ata port system PM callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
smatch warn:
fs/ntfs3/fslog.c:2172 last_log_lsn() warn: possible memory leak of 'page_bufs'
Jump to label 'out' to free 'page_bufs' and is more consistent with
other code.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Calling stat() from userspace correctly identified junctions in an NTFS
partition as symlinks, but using readdir() and iterating through the
directory containing the same junction did not identify the junction
as a symlink.
When emitting directory contents, check FILE_ATTRIBUTE_REPARSE_POINT
attribute to detect junctions and report them as links.
Signed-off-by: Gabriel Marcano <gabemarcano@yahoo.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Upon investigation of the C reproducer provided by Syzbot, it seemed
the reproducer was trying to mount a corrupted NTFS filesystem, then
issue a rename syscall to some nodes in the filesystem. This can be
shown by modifying the reproducer to only include the mount syscall,
and investigating the filesystem by e.g. `ls` and `rm` commands. As a
result, during the problematic call to `hdr_fine_e`, the `inode` being
supplied did not go through `indx_init`, hence the `cmp` function
pointer was never set.
The fix is simply to check whether `cmp` is not set, and return NULL
if that's the case, in order to be consistent with other error
scenarios of the `hdr_find_e` method. The rationale behind this patch
is that:
- We should prevent crashing the kernel even if the mounted filesystem
is corrupted. Any syscalls made on the filesystem could return
invalid, but the kernel should be able to sustain these calls.
- Only very specific corruption would lead to this bug, so it would be
a pretty rare case in actual usage anyways. Therefore, introducing a
check to specifically protect against this bug seems appropriate.
Because of its rarity, an `unlikely` clause is used to wrap around
this nullity check.
Reported-by: syzbot+60cf892fc31d1f4358fc@syzkaller.appspotmail.com
Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Syzbot was able to create a device which has the last sector of size
512.
After failing to boot from initial sector, reading from boot info from
offset 511 causes OOB read.
To prevent such reports add sanity check to validate if size of buffer_head
if big enough to hold ntfs3 bootinfo
Fixes: 6a4cd3ea7d ("fs/ntfs3: Alternative boot if primary boot is corrupted")
Reported-by: syzbot+53ce40c8c0322c06aea5@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Here is a BUG report about linux-6.1 from syzbot, but it still remains
within upstream:
BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632
Call Trace:
kasan_report+0x139/0x170 mm/kasan/report.c:495
ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
vfs_listxattr fs/xattr.c:457 [inline]
listxattr+0x293/0x2d0 fs/xattr.c:804
path_listxattr fs/xattr.c:828 [inline]
__do_sys_llistxattr fs/xattr.c:846 [inline]
Before derefering field members of `ea` in unpacked_ea_size(), we need to
check whether the EA_FULL struct is located in access validate range.
Similarly, when derefering `ea->name` field member, we need to check
whethe the ea->name is located in access validate range, too.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Reported-by: syzbot+9fcea5ef6dc4dc72d334@syzkaller.appspotmail.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
[almaz.alexandrovich@paragon-software.com: took the ret variable out of the loop block]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
