Move np->recverr_rfc4884 to an atomic flag to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add one missing READ_ONCE() annotation in do_ipv6_getsockopt()
and make IPV6_MINHOPCOUNT setsockopt() lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
np->frag_size can be read/written without holding socket lock.
Add missing annotations and make IPV6_MTU setsockopt() lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes data-races around np->mcast_hops,
and make IPV6_MULTICAST_HOPS lockless.
Note that np->mcast_hops is never negative,
thus can fit an u8 field instead of s16.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add inet6_{test|set|clear|assign}_bit() helpers.
Note that I am using bits from inet->inet_flags,
this might change in the future if we need more flags.
While solving data-races accessing np->mc_loop,
this patch also allows to implement lockless accesses
to np->mcast_hops in the following patch.
Also constify sk_mc_loop() argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some np->hop_limit accesses are racy, when socket lock is not held.
Add missing annotations and switch to full lockless implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit:
5a5d7e9bad ("cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG")
amended warn_slowpath_fmt() to disable preemption until the WARN splat
has been emitted.
However the commit neglected to reenable preemption in the !fmt codepath,
i.e. when a WARN splat is emitted without additional format string.
One consequence is that users may see more splats than intended. E.g. a
WARN splat emitted in a work item results in at least two extra splats:
BUG: workqueue leaked lock or atomic
(emitted by process_one_work())
BUG: scheduling while atomic
(emitted by worker_thread() -> schedule())
Ironically the point of the commit was to *avoid* extra splats. ;)
Fix it.
Fixes: 5a5d7e9bad ("cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/3ec48fde01e4ee6505f77908ba351bad200ae3d1.1694763684.git.lukas@wunner.de
The x86 boot image generation tool assign a default value to startup_64
and subsequently parses the actual value from zoffset.h but it never
actually uses the value anywhere. So remove this code.
This change has no impact on the resulting bzImage binary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-25-ardb@google.com
The root device defaults to 0,0 and is no longer configurable at build
time [0], so there is no need for the build tool to ever write to this
field.
[0] 079f85e624 ("x86, build: Do not set the root_dev field in bzImage")
This change has no impact on the resulting bzImage binary.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-23-ardb@google.com
Now that the EFI stub decompresses the kernel and hands over to the
decompressed image directly, there is no longer a need to provide a
decompression buffer as part of the .BSS allocation of the PE/COFF
image. It also means the PE/COFF image can be loaded anywhere in memory,
and setting the preferred image base is unnecessary. So drop the
handling of this from the header and from the build tool.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-22-ardb@google.com
Ancient (pre-2003) x86 kernels could boot from a floppy disk straight from
the BIOS, using a small real mode boot stub at the start of the image
where the BIOS would expect the boot record (or boot block) to appear.
Due to its limitations (kernel size < 1 MiB, no support for IDE, USB or
El Torito floppy emulation), this support was dropped, and a Linux aware
bootloader is now always required to boot the kernel from a legacy BIOS.
To smoothen this transition, the boot stub was not removed entirely, but
replaced with one that just prints an error message telling the user to
install a bootloader.
As it is unlikely that anyone doing direct floppy boot with such an
ancient kernel is going to upgrade to v6.5+ and expect that this boot
method still works, printing this message is kind of pointless, and so
it should be possible to remove the logic that emits it.
Let's free up this space so it can be used to expand the PE header in a
subsequent patch.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lore.kernel.org/r/20230912090051.4014114-21-ardb@google.com
The section header flags for alignment are documented in the PE/COFF
spec as being applicable to PE object files only, not to PE executables
such as the Linux bzImage, so let's drop them from the PE header.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-20-ardb@google.com
The native EFI entrypoint does not take a struct boot_params from the
loader, but instead, it constructs one from scratch, using the setup
header data placed at the start of the image.
This setup header is placed in a way that permits legacy loaders to
manipulate the contents (i.e., to pass the kernel command line or the
address and size of an initial ramdisk), but EFI boot does not use it in
that way - it only copies the contents that were placed there at build
time, but EFI loaders will not (and should not) manipulate the setup
header to configure the boot. (Commit 63bf28ceb3 "efi: x86: Wipe
setup_data on pure EFI boot" deals with some of the fallout of using
setup_data in a way that breaks EFI boot.)
Given that none of the non-zero values that are copied from the setup
header into the EFI stub's struct boot_params are relevant to the boot
now that the EFI stub no longer enters via the legacy decompressor, the
copy can be omitted altogether.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-19-ardb@google.com
Now that the EFI stub always zero inits its BSS section upon entry,
there is no longer a need to place the BSS symbols carried by the stub
into the .data section.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230912090051.4014114-18-ardb@google.com
list_for_each_entry_rcu() takes an optional fourth argument which
allows RCU to assert that the correct lock is held. Several callers
of for_each_thread() rely on their caller to be holding the appropriate
lock, so this is a useful assertion to include.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20230821134428.2504912-1-willy@infradead.org
In cs35l56_hda_read_acpi() do not return if ACPI _SUB is missing.
A missing _SUB means that the driver cannot load a system-specific
firmware, because the firmware is identified by the _SUB. But it can
fallback to a generic firmware. Unfortunately this was being handled
by immediately returning 0, which would skip the remaining ACPI
configuration in cs35l56_hda_read_acpi() and so it would not get the
RESET GPIO.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://lore.kernel.org/r/20230914152525.20829-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo ThinkCentre M70q had boot up pop noise.
Disable power save will solve pop issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/315900e2efef42fd9855eacfeb443abd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
tls.sendmsg_large and tls.sendmsg_multiple are trying to send through
the self->cfd socket (only configured with TLS_RX) and to receive through
the self->fd socket (only configured with TLS_TX), so they're not using
kTLS at all. Swap the sockets.
Fixes: 7f657d5bf5 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor cleanup pointed out by checkpatch (repeated words, missing blank
lines) in smb2pdu.c and old header location referred to in transport.c
Signed-off-by: Steve French <stfrench@microsoft.com>
Jinjie Ruan says:
====================
net: microchip: sparx5: Fix some memory leaks in vcap_api_kunit
There are some memory leaks in vcap_api_kunit, this patchset
fixes them.
Changes in v3:
- Fix the typo in patch 3, from "export" to "vcap enabled port".
- Fix the typo in patch 4, from "vcap_dup_rule" to "vcap_alloc_rule".
Changes in v2:
- Adhere to the 80 character limit in vcap_free_caf()
- Fix kernel test robot reported warnings in test_vcap_xn_rule_creator()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
checkpatch flagged a few places with:
WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
Also fixed minor typo
Signed-off-by: Steve French <stfrench@microsoft.com>
In cxl_port_setup_targets() the region driver validates the
configuration of auto-discovered region decoders, as well
as decoders the driver is preparing to program.
The existing calculations use the encoded interleave granularity
value to create an interleave granularity that properly fans out
when routing an x1 interleave to a greater than x1 interleave.
That all worked well, until this config came along:
Host Bridge: 2 way at 256 granularity
Switch Decoder_A: 1 way at 512
Endpoint_X: 2 way at 256
Switch Decoder_B: 1 way at 512
Endpoint_Y: 2 way at 256
When the Host Bridge interleave is greater than 1 and the root
decoder interleave is exactly 1, the region driver needs to
consider the number of targets in the region when calculating
the expected granularity.
While examining the existing logic, and trying to cover the case
above, a couple of simplifications appeared, hence this proposed
refactoring.
The first simplification is to apply the logic to the nominal
values and use the existing helper function granularity_to_eig() to
translate the desired granularity to the encoded form. This means
the comment and code regarding setting address bits is discarded.
Although that logic is not wrong, it adds a level of complexity that
is not required in the granularity selection. The eig and eiw are
indeed part of the routing instructions programmed into the decoders.
Up-level the discussion to nominal ways and granularity for clearer
analysis.
The second simplification reduces the logic to a single granularity
calculation that works for all cases. The new calculation doesn't
care if parent_iw => 1 because parent_iw is used as a multiplier.
The refactor cleans up a useless assignment of eiw made after the
iw is already calculated.
Regression testing included an examination of all of the ways and
granularity selections made during a run of the cxl_test unit tests.
There were no differences in selections before and after this patch.
Fixes: ("27b3f8d138 cxl/region: Program target lists")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230822180928.117596-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Currently, when the region driver attaches a region to a port, it
selects the ports next available decoder to program.
With the addition of auto-discovered regions, a port decoder has
already been programmed so grabbing the next available decoder can
be a mismatch when there is more than one region using the port.
The failure appears like this with CXL DEBUG enabled:
[] cxl_core:alloc_region_ref:754: cxl region0: endpoint9: HPA order violation region0:[mem 0x14780000000-0x1478fffffff flags 0x200] vs [mem 0x880000000-0x185fffffff flags 0x200]
[] cxl_core:cxl_port_attach_region:972: cxl region0: endpoint9: failed to allocate region reference
When CXL DEBUG is not enabled, there is no failure message. The region
just never materializes. Users can suspect this issue if they know their
firmware has programmed decoders so that more than one region is using
a port. Note that the problem may appear intermittently, ie not on
every reboot.
Add a matching method for auto-discovered regions that finds a decoder
based on an HPA range. The decoder range must exactly match the region
resource parameter.
Fixes: a32320b71f ("cxl/region: Add region autodiscovery")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230905211007.256385-1-alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When a CRC error occurs, the HBA asserts an interrupt to indicate an
interface fatal error (PxIS.IFS). The ISR clears PxIE and PxIS, then
does error recovery. If the adapter receives another SDB FIS
with an error (PxIS.TFES) from the device before the start of the EH
recovery process, the interrupt signaling the new SDB cannot be
serviced as PxIE was cleared already. This in turn results in the HBA
inability to issue any command during the error recovery process after
setting PxCMD.ST to 1 because PxIS.TFES is still set.
According to AHCI 1.3.1 specifications section 6.2.2, fatal errors
notified by setting PxIS.HBFS, PxIS.HBDS, PxIS.IFS or PxIS.TFES will
cause the HBA to enter the ERR:Fatal state. In this state, the HBA
shall not issue any new commands.
To avoid this situation, introduce the function
ahci_port_clear_pending_irq() to clear pending interrupts before
executing a COMRESET. This follows the AHCI 1.3.1 - section 6.2.2.2
specification.
Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw>
Fixes: e0bfd14997 ("[PATCH] ahci: stop engine during hard reset")
Cc: stable@vger.kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Current code charges modmem for regular trampoline, but not for struct_ops
trampoline. Add bpf_jit_[charge|uncharge]_modmem() to struct_ops so the
trampoline is charged in both cases.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230914222542.2986059-1-song@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
- nvme-tcp iov len fix (Varun)
- nvme-hwmon const qualifier for safety (Krzysztof)
- nvme-fc null pointer checks (Nigel)
- nvme-pci no numa node fix (Pratyush)
- nvme timeout fix for non-compliant controllers (Keith)
-----BEGIN PGP SIGNATURE-----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=WTY0
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.6-2023-09-14' of git://git.infradead.org/nvme into block-6.6
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.6
- nvme-tcp iov len fix (Varun)
- nvme-hwmon const qualifier for safety (Krzysztof)
- nvme-fc null pointer checks (Nigel)
- nvme-pci no numa node fix (Pratyush)
- nvme timeout fix for non-compliant controllers (Keith)"
* tag 'nvme-6.6-2023-09-14' of git://git.infradead.org/nvme:
nvme: avoid bogus CRTO values
nvme-pci: do not set the NUMA node of device if it has none
nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()
nvme: host: hwmon: constify pointers to hwmon_channel_info
nvmet-tcp: pass iov_len instead of sg->length to bvec_set_page()
The WARN_ONCE was issued also in cases that had nothing to do with VM_IO
(e.g. if the start address was just a random value and uaccess fails with
-EFAULT).
There are no reports of WARN_ONCE being issued for actual VM_IO cases, so
just drop it and instead add a note to the comment before the function.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: Yikebaer Aizezi <yikebaer61@gmail.com>
If the index provided by the user is bigger than the mask size, we might do
an out of bound read.
CC: stable@kernel.org
Fixes: 40140eda66 ("media: uvcvideo: Implement mask for V4L2_CTRL_TYPE_MENU")
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Do not turn on the vcr_hack based on the btv->field value.
This was a change in the bttv vb2 conversion that caused
green lines at the bottom of the picture in tvtime.
It was originally added to the vb2 conversion based on
faulty information that without this there would be glitches
in the video. However, later tests suggest that this is a
problem in the utilities used to test this since tvtime
behaves fine.
This patch reverts the bttv driver to the original pre-vb2
behavior w.r.t. vcr_hack.
Fixes: b7ec3212a7 ("media: bttv: convert to vb2")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The commit in Fixes has removed an fwnode_handle_put() call in the error
handling path of the probe.
Remove the same call from the remove function.
Fixes: 1029939b37 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The .set_fmt() handler tries to avoid updating the sensor configuration
when the mode hasn't changed. It does so by comparing both the mode and
the media bus code. While the latter correctly uses the media bus code
stored in the subdev state, the former compares the mode being set with
the active mode, regardless of whether .set_fmt() is called for the
ACTIVE or TRY format. This can lead to .set_fmt() returning early when
operating on TRY formats.
This could be fixed by replacing the mode comparison with width and
height comparisons, using the frame size stored in the subdev state.
However, the optimization that avoids updates to the sensor
configuration is not very useful, and is not commonly found in sensor
drivers. To improve consistency across sensor drivers, it is better, in
addition to being easier, to simply drop it. Do so.
Fixes: e8a5b1df00 ("media: i2c: imx219: Use subdev active state")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When moving the imx219 driver to the subdev active state, commit
e8a5b1df00 ("media: i2c: imx219: Use subdev active state") used the
pad crop rectangle stored in the subdev state to report the crop
rectangle of the active mode. That crop rectangle was however not set in
the state when setting the format, which resulted in reporting an
incorrect crop rectangle to userspace. Fix it.
Fixes: e8a5b1df00 ("media: i2c: imx219: Use subdev active state")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The imx219_init_cfg() function has stopped operating on the try format
since commit 7e700847b1 ("media: i2c: imx219: Switch from open to
init_cfg"), but a comment in the function wasn't updated. Fix it.
While at it, improve spelling in a second comment in the function.
Fixes: 7e700847b1 ("media: i2c: imx219: Switch from open to init_cfg")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The commit in Fixes has removed an fwnode_handle_put() call in the error
handling path of max9286_v4l2_register().
Remove the same call from max9286_v4l2_unregister().
Fixes: 1029939b37 ("media: v4l: async: Simplify async sub-device fwnode matching")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CONFIG_VIDEO_DEV is required by other selected symbols. Depend on it.
Link: https://lore.kernel.org/linux-media/20230828085718.3912335-1-sakari.ailus@linux.intel.com
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 29006e196a ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When opening a directory (opendir(3)) or rewinding it (rewinddir(3)), we
are not holding the directory's inode locked, and this can result in later
attempting to add two entries to the directory with the same index number,
resulting in a transaction abort, with -EEXIST (-17), when inserting the
second delayed dir index. This results in a trace like the following:
Sep 11 22:34:59 myhostname kernel: BTRFS error (device dm-3): err add delayed dir index item(name: cockroach-stderr.log) into the insertion tree of the delayed node(root id: 5, inode id: 4539217, errno: -17)
Sep 11 22:34:59 myhostname kernel: ------------[ cut here ]------------
Sep 11 22:34:59 myhostname kernel: kernel BUG at fs/btrfs/delayed-inode.c:1504!
Sep 11 22:34:59 myhostname kernel: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
Sep 11 22:34:59 myhostname kernel: CPU: 0 PID: 7159 Comm: cockroach Not tainted 6.4.15-200.fc38.x86_64 #1
Sep 11 22:34:59 myhostname kernel: Hardware name: ASUS ESC500 G3/P9D WS, BIOS 2402 06/27/2018
Sep 11 22:34:59 myhostname kernel: RIP: 0010:btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: Code: eb dd 48 (...)
Sep 11 22:34:59 myhostname kernel: RSP: 0000:ffffa9980e0fbb28 EFLAGS: 00010282
Sep 11 22:34:59 myhostname kernel: RAX: 0000000000000000 RBX: ffff8b10b8f4a3c0 RCX: 0000000000000000
Sep 11 22:34:59 myhostname kernel: RDX: 0000000000000000 RSI: ffff8b177ec21540 RDI: ffff8b177ec21540
Sep 11 22:34:59 myhostname kernel: RBP: ffff8b110cf80888 R08: 0000000000000000 R09: ffffa9980e0fb938
Sep 11 22:34:59 myhostname kernel: R10: 0000000000000003 R11: ffffffff86146508 R12: 0000000000000014
Sep 11 22:34:59 myhostname kernel: R13: ffff8b1131ae5b40 R14: ffff8b10b8f4a418 R15: 00000000ffffffef
Sep 11 22:34:59 myhostname kernel: FS: 00007fb14a7fe6c0(0000) GS:ffff8b177ec00000(0000) knlGS:0000000000000000
Sep 11 22:34:59 myhostname kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Sep 11 22:34:59 myhostname kernel: CR2: 000000c00143d000 CR3: 00000001b3b4e002 CR4: 00000000001706f0
Sep 11 22:34:59 myhostname kernel: Call Trace:
Sep 11 22:34:59 myhostname kernel: <TASK>
Sep 11 22:34:59 myhostname kernel: ? die+0x36/0x90
Sep 11 22:34:59 myhostname kernel: ? do_trap+0xda/0x100
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? do_error_trap+0x6a/0x90
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? exc_invalid_op+0x50/0x70
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? asm_exc_invalid_op+0x1a/0x20
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: ? btrfs_insert_delayed_dir_index+0x1da/0x260
Sep 11 22:34:59 myhostname kernel: btrfs_insert_dir_item+0x200/0x280
Sep 11 22:34:59 myhostname kernel: btrfs_add_link+0xab/0x4f0
Sep 11 22:34:59 myhostname kernel: ? ktime_get_real_ts64+0x47/0xe0
Sep 11 22:34:59 myhostname kernel: btrfs_create_new_inode+0x7cd/0xa80
Sep 11 22:34:59 myhostname kernel: btrfs_symlink+0x190/0x4d0
Sep 11 22:34:59 myhostname kernel: ? schedule+0x5e/0xd0
Sep 11 22:34:59 myhostname kernel: ? __d_lookup+0x7e/0xc0
Sep 11 22:34:59 myhostname kernel: vfs_symlink+0x148/0x1e0
Sep 11 22:34:59 myhostname kernel: do_symlinkat+0x130/0x140
Sep 11 22:34:59 myhostname kernel: __x64_sys_symlinkat+0x3d/0x50
Sep 11 22:34:59 myhostname kernel: do_syscall_64+0x5d/0x90
Sep 11 22:34:59 myhostname kernel: ? syscall_exit_to_user_mode+0x2b/0x40
Sep 11 22:34:59 myhostname kernel: ? do_syscall_64+0x6c/0x90
Sep 11 22:34:59 myhostname kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
The race leading to the problem happens like this:
1) Directory inode X is loaded into memory, its ->index_cnt field is
initialized to (u64)-1 (at btrfs_alloc_inode());
2) Task A is adding a new file to directory X, holding its vfs inode lock,
and calls btrfs_set_inode_index() to get an index number for the entry.
Because the inode's index_cnt field is set to (u64)-1 it calls
btrfs_inode_delayed_dir_index_count() which fails because no dir index
entries were added yet to the delayed inode and then it calls
btrfs_set_inode_index_count(). This functions finds the last dir index
key and then sets index_cnt to that index value + 1. It found that the
last index key has an offset of 100. However before it assigns a value
of 101 to index_cnt...
3) Task B calls opendir(3), ending up at btrfs_opendir(), where the VFS
lock for inode X is not taken, so it calls btrfs_get_dir_last_index()
and sees index_cnt still with a value of (u64)-1. Because of that it
calls btrfs_inode_delayed_dir_index_count() which fails since no dir
index entries were added to the delayed inode yet, and then it also
calls btrfs_set_inode_index_count(). This also finds that the last
index key has an offset of 100, and before it assigns the value 101
to the index_cnt field of inode X...
4) Task A assigns a value of 101 to index_cnt. And then the code flow
goes to btrfs_set_inode_index() where it increments index_cnt from
101 to 102. Task A then creates a delayed dir index entry with a
sequence number of 101 and adds it to the delayed inode;
5) Task B assigns 101 to the index_cnt field of inode X;
6) At some later point when someone tries to add a new entry to the
directory, btrfs_set_inode_index() will return 101 again and shortly
after an attempt to add another delayed dir index key with index
number 101 will fail with -EEXIST resulting in a transaction abort.
Fix this by locking the inode at btrfs_get_dir_last_index(), which is only
only used when opening a directory or attempting to lseek on it.
Reported-by: ken <ken@bllue.org>
Link: https://lore.kernel.org/linux-btrfs/CAE6xmH+Lp=Q=E61bU+v9eWX8gYfLvu6jLYxjxjFpo3zHVPR0EQ@mail.gmail.com/
Reported-by: syzbot+d13490c82ad5353c779d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000036e1290603e097e0@google.com/
Fixes: 9b378f6ad4 ("btrfs: fix infinite directory reads")
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When opening a directory we find what's the index of its last entry and
then store it in the directory's file handle private data (struct
btrfs_file_private::last_index), so that in the case new directory entries
are added to a directory after an opendir(3) call we don't end up in an
infinite loop (see commit 9b378f6ad4 ("btrfs: fix infinite directory
reads")) when calling readdir(3).
However once rewinddir(3) is called, POSIX states [1] that any new
directory entries added after the previous opendir(3) call, must be
returned by subsequent calls to readdir(3):
"The rewinddir() function shall reset the position of the directory
stream to which dirp refers to the beginning of the directory.
It shall also cause the directory stream to refer to the current
state of the corresponding directory, as a call to opendir() would
have done."
We currently don't refresh the last_index field of the struct
btrfs_file_private associated to the directory, so after a rewinddir(3)
we are not returning any new entries added after the opendir(3) call.
Fix this by finding the current last index of the directory when llseek
is called against the directory.
This can be reproduced by the following C program provided by Ian Johnson:
#include <dirent.h>
#include <stdio.h>
int main(void) {
DIR *dir = opendir("test");
FILE *file;
file = fopen("test/1", "w");
fwrite("1", 1, 1, file);
fclose(file);
file = fopen("test/2", "w");
fwrite("2", 1, 1, file);
fclose(file);
rewinddir(dir);
struct dirent *entry;
while ((entry = readdir(dir))) {
printf("%s\n", entry->d_name);
}
closedir(dir);
return 0;
}
Reported-by: Ian Johnson <ian@ianjohnson.dev>
Link: https://lore.kernel.org/linux-btrfs/YR1P0S.NGASEG570GJ8@ianjohnson.dev/
Fixes: 9b378f6ad4 ("btrfs: fix infinite directory reads")
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When opening a directory for reading it, we set the last index where we
stop iteration to the value in struct btrfs_inode::index_cnt. That value
does not match the index of the most recently added directory entry but
it's instead the index number that will be assigned the next directory
entry.
This means that if after the call to opendir(3) new directory entries are
added, a readdir(3) call will return the first new directory entry. This
is fine because POSIX says the following [1]:
"If a file is removed from or added to the directory after the most
recent call to opendir() or rewinddir(), whether a subsequent call to
readdir() returns an entry for that file is unspecified."
For example for the test script from commit 9b378f6ad4 ("btrfs: fix
infinite directory reads"), where we have 2000 files in a directory, ext4
doesn't return any new directory entry after opendir(3), while xfs returns
the first 13 new directory entries added after the opendir(3) call.
If we move to a shorter example with an empty directory when opendir(3) is
called, and 2 files added to the directory after the opendir(3) call, then
readdir(3) on btrfs will return the first file, ext4 and xfs return the 2
files (but in a different order). A test program for this, reported by
Ian Johnson, is the following:
#include <dirent.h>
#include <stdio.h>
int main(void) {
DIR *dir = opendir("test");
FILE *file;
file = fopen("test/1", "w");
fwrite("1", 1, 1, file);
fclose(file);
file = fopen("test/2", "w");
fwrite("2", 1, 1, file);
fclose(file);
struct dirent *entry;
while ((entry = readdir(dir))) {
printf("%s\n", entry->d_name);
}
closedir(dir);
return 0;
}
To make this less odd, change the behaviour to never return new entries
that were added after the opendir(3) call. This is done by setting the
last_index field of the struct btrfs_file_private attached to the
directory's file handle with a value matching btrfs_inode::index_cnt
minus 1, since that value always matches the index of the next new
directory entry and not the index of the most recently added entry.
[1] https://pubs.opengroup.org/onlinepubs/007904875/functions/readdir_r.html
Link: https://lore.kernel.org/linux-btrfs/YR1P0S.NGASEG570GJ8@ianjohnson.dev/
CC: stable@vger.kernel.org # 6.5+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following debug output was observed while testing CXL
cxl_core:cxl_walk_cel:721: cxl_mock_mem cxl_mem.0: Opcode 0x4300 unsupported by driver
opcode 0x4300 (Get Poison) is supported by the driver and the mock
device supports it. The logic should be checking that the opcode is
both not poison and not security.
Fix the logic to allow poison and security commands.
Fixes: ad64f5952c ("cxl/memdev: Only show sanitize sysfs files when supported")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230903-cxl-cel-fix-v1-1-e260c9467be3@intel.com
[cleanup cxl_walk_cel() to centralized "enabled" checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some devices are reporting controller ready mode support, but return 0
for CRTO. These devices require a much higher time to ready than that,
so they are failing to initialize after the driver starter preferring
that value over CAP.TO.
The spec requires that CAP.TO match the appropritate CRTO value, or be
set to 0xff if CRTO is larger than that. This means that CAP.TO can be
used to validate if CRTO is reliable, and provides an appropriate
fallback for setting the timeout value if not. Use whichever is larger.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217863
Reported-by: Cláudio Sampaio <patola@gmail.com>
Reported-by: Felix Yan <felixonmars@archlinux.org>
Tested-by: Felix Yan <felixonmars@archlinux.org>
Based-on-a-patch-by: Felix Yan <felixonmars@archlinux.org>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <kbusch@kernel.org>
