Some SoCs have in built firmware support to classify current running
workload and pass to OS for making power management decisions.
This test program waits for notification of workload type change
and prints. This program can be used to test this feature and also
allows other user space programs to use as a reference.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On thermal device interrupt, if the interrupt is generated for passing
workload hint, call the callback to pass notification to the user
space.
First call proc_thermal_check_wt_intr() to check interrupt, if this
callback returns true, wake the IRQ thread to call
proc_thermal_wt_intr_callback() to notify user space.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject adjustment, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Prior to Meteor Lake processor generation, user space can pass workload
type request to the firmware. Then firmware can optimize power based on
the indicated workload type. User space also uses workload type requests
to implement its own heuristics.
The firmware in Meteor Lake processor generation is capable of predicting
workload type without software help.
To avoid duplicate processing, add a sysfs interface allowing user space
to obtain the workload hint from the firmware instead of trying to
predict the workload type by itself.
This workload hint is passed from the firmware via MMIO offset 0x5B18 of
the processor thermal PCI device. Before workload hints can be produced by
the firmware, it needs to be configured via a mailbox command. This
mailbox command turns ON the workload hint and it allows to program a
notification delay to control the rate of notifications.
The notification delay can be changed from user space vis sysfs.
Attribute group 'workload_hint' in sysfs is used for implementing the
workload hints interface between user space and the kernel.
It contains the following attributes:
workload_type_enable:
Enables/disables workload type hints from the firmware.
notification_delay_ms:
Notification delay in milliseconds.
workload_type_index:
The current workload type index predicted by the firmware (see
the documentation changes below for supported index values and
their meaning).
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Changelog edits, documentation edits, whitespace adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Meteor Lake processor supports firmware hints for predicting workload
type. So, remove support for passing workload hints to the firmware.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are issues in using MSI interrupts for processor thermal device.
The support is not consistent across generations. But the legacy PCI
interrupts work on all current generations.
Hence always use legacy PCI interrupts by default, instead of MSI.
Add a module param to use of MSI, so that MSI can be still used.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some features like workload type prediction and power floor events
require interrupt support to avoid polling. Here interrupts are enabled
and disabled via sending mailbox commands. The mailbox command ID is
0x1E for read and 0x1F for write.
The interrupt configuration will require mutex protection as it involves
read-modify-write operation. Since mutex are already used in the mailbox
read/write functions: send_mbox_write_cmd() and send_mbox_read_cmd(),
there will be double locking. But, this can be avoided by moving mutexes
from mailbox read/write processing functions to the callers:
processor_thermal_send_mbox_[read|write]_cmd().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Adjust subject, fix up computation ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The processor thermal mailbox is used for workload type request and
also in the processor thermal RFIM module. So, move the workload type
request code to its own module from the current processor thermal
mailbox module.
processor_thermal_mailbox.c contains only mailbox read/write related
source code. The source related to workload_types requests is moved to
a module processor_thermal_wt_req.c.
In addition
- Rename PROC_THERMAL_FEATURE_MBOX to PROC_THERMAL_FEATURE_WT_REQ.
- proc_thermal_mbox_add(), which adds workload type sysfs attribute group
is renamed to proc_thermal_wt_req_add().
- proc_thermal_mbox_remove() is renamed to proc_thermal_wt_req_remove().
While here, resolve check patch warnings for 100 columns for only modified
lines.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit bc840ea5f9 ("thermal: core: Do not handle trip points with
invalid temperature") added a check for invalid temperature to the
disabled trip point check in handle_thermal_trip(), but that check was
added at a point when the trip structure has not been initialized yet.
This may cause handle_thermal_trip() to skip a valid trip point in some
cases, so fix it by moving the check to a suitable place, after
__thermal_zone_get_trip() has been called to populate the trip
structure.
Fixes: bc840ea5f9 ("thermal: core: Do not handle trip points with invalid temperature")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "sb_kern_mount" hook has implementation registered in SELinux.
Looking at the function implementation we observe that the "sb"
parameter is not changing.
Mark the "sb" parameter of LSM hook security_sb_kern_mount() as "const"
since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Three LSMs register the implementations for the 'bprm_committed_creds()'
hook: AppArmor, SELinux and tomoyo. Looking at the function
implementations we may observe that the 'bprm' parameter is not changing.
Mark the 'bprm' parameter of LSM hook security_bprm_committed_creds() as
'const' since it will not be changing in the LSM hook.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
[PM: minor merge fuzzing due to other constification patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull MD fixes from Song:
"These commits fix a bugzilla report [1] and some recent issues in 6.5
and 6.6.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=217798"
* tag 'md-fixes-20230914' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: Put the right device in md_seq_next
md/raid1: fix error: ISO C90 forbids mixed declarations
md: fix warning for holder mismatch from export_rdev()
md: don't dereference mddev after export_rdev()
This test relies on bpf_testmod, so skip it if the module is not available.
Fixes: aa3d65de4b ("bpf/selftests: Test fentry attachment to shadowed functions")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230914124928.340701-1-asavkov@redhat.com
Running "make modules_install" may fail with
make[2]: execvp: /bin/sh: Argument list too long
if many modules are built and INSTALL_MOD_PATH is long. This is because
scripts/Makefile.modinst creates all directories with one mkdir command.
Use $(foreach ...) instead to prevent an excessive argument list.
Fixes: 2dfec887c0 ("kbuild: reduce the number of mkdir calls during modules_install")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit fe66b5d2ae ("kbuild: refactor kernel-devel RPM package
and linux-headers Deb package"), the kernel-devel RPM package and
linux-headers Deb package are broken.
I double-quoted the $(find ... -type d), which resulted in newlines
being included in the argument to the outer find comment.
find: 'arch/arm64/include\narch/arm64/kvm/hyp/include': No such file or directory
The outer find command is unneeded.
Fixes: fe66b5d2ae ("kbuild: refactor kernel-devel RPM package and linux-headers Deb package")
Reported-by: Karolis M <k4rolis@protonmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
If there are multiple arrays in system and one mddevice is marked
with MD_DELETED and md_seq_next() is called in the middle of removal
then it _get()s proper device but it may _put() deleted one. As a result,
active counter may never be zeroed for mddevice and it cannot
be removed.
Put the device which has been _get with previous md_seq_next() call.
Cc: stable@vger.kernel.org
Fixes: 12a6caf273 ("md: only delete entries from all_mddevs when the disk is freed")
Reported-by: AceLan Kao <acelan@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217798
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230914152416.10819-1-mariusz.tkaczyk@linux.intel.com
In lockstep mode following is TCM address map:
| *TCM* | *R5 View* | *Linux view* |
| R5_0 ATCM (128 KB) | 0x0000_0000 | 0xFFE0_0000 |
| R5_0 BTCM (128 KB) | 0x0002_0000 | 0xFFE2_0000 |
Current driver keeps single TCM carveout in lockstep mode
as ATCM and BTCM addresses form contiguous memory region.
Although the addresses are contiguous, it is not same type
of memory. ATCM typically holds interrupt or exception code
that must be accessed at high speed. BTCM typically holds
a block of data for intensive processing, such as audio or
video processing. As both are different types of memory,
they should be allocated as different carveout. This patch
is fixing TCM carveout allocation in lockstep mode.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20230913024323.2768114-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vSvh
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(nf, ebpf, wifi, etc).
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in
bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()"
* tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
net: renesas: rswitch: Add spin lock protection for irq {un}mask
net: renesas: rswitch: Fix unmasking irq condition
igb: clean up in all error paths when enabling SR-IOV
ixgbe: fix timestamp configuration code
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
selftest: tcp: Fix address length in bind_wildcard.c.
tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.
tcp: Fix bind() regression for v4-mapped-v6 wildcard address.
tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).
ipv6: fix ip6_sock_set_addr_preferences() typo
veth: Update XDP feature set when bringing up device
net: macb: fix sleep inside spinlock
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988
net: ethernet: mtk_eth_soc: fix uninitialized variable
kcm: Fix memory leak in error path of kcm_sendmsg()
r8152: check budget for r8152_poll()
net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset
...
Magnus Karlsson says:
====================
seltests/xsk: various improvements to xskxceiver
This patch set implements several improvements to the xsk selftests
test suite that I thought were useful while debugging the xsk
multi-buffer code and tests. The largest new feature is the ability to
be able to execute a single test instead of the whole test suite. This
required some surgery on the current code, details below.
Anatomy of the path set:
1: Print useful info on a per packet basis with the option -v
2: Add a timeout in the transmission loop too. We only used to have
one for the Rx thread, but Tx can lock up too waiting for
completions.
3: Add an option (-m) to only run the tests (or a single test with a
later patch) in a single mode: skb, drv, or zc (zero-copy).
4-5: Preparatory patches to be able to specify a test to run. Need to
define the test names in a single structure and their entry
points, so we can use this when wanting to run a specific test.
6: Adds a command line option (-l) that lists all the tests.
7: Adds a command line option (-t) that runs a specific test instead
of the whole test suite. Can be combined with -m to specify a
single mode too.
8: Use ksft_print_msg() uniformly throughout the tests. It was a mix
of printf() and ksft_print_msg() before.
9: In some places, we failed the whole test suite instead of a single
test in certain circumstances. Fix this so only the test in
question is failed and the rest of the test suite continues.
10: Display the available command line options with -h
v3 -> v4:
* Fixed another spelling error in patch #9 [Maciej]
* Only allow the actual strings for the -m command [Maciej]
* Move some code from patch #7 to #3 [Maciej]
v2 -> v3:
* Drop the support for environment variables. Probably not useful. [Maciej]
* Fixed spelling mistake in patch #9 [Maciej]
* Fail gracefully if unsupported mode is chosen [Maciej]
* Simplified test run loop [Maciej]
v1 -> v2:
* Introduce XSKTEST_MODE env variable to be able to set the mode to
use [Przemyslaw]
* Introduce XSKTEST_ETH env variable to be able to set the ethernet
interface to use by introducing a new patch (#11) [Magnus]
* Fixed spelling error in patch #5 [Przemyslaw, Maciej]
* Fixed confusing documentation in patch #10 [Przemyslaw]
* The -l option can now be used without being root [Magnus, Maciej]
* Fixed documentation error in patch #7 [Maciej]
* Added error handling to the -t option [Maciej]
* -h now displayed as an option [Maciej]
Thanks: Magnus
====================
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-1-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the -h option to display all available command line options
available for test_xsk.sh and xskxceiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a number of places at en error, exit_with_error() is called that
terminates the whole test suite. This is not always desirable as it
would be more logical to only fail that test and then go along with
the other ones. So change this in a number of places in which I
thought it would be more logical to just fail the test in
question. Examples of this are in code that is only used by a single
test.
Also delete a pointless if-statement in receive_pkts() that has an
exit_with_error() in it. It can never occur since the return value is
an unsigned and the test is for less than zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use ksft_print_msg() instead of printf() and fprintf() in all places
as the ksefltests framework is being used. There is only one exception
and that is for the list-of-tests print out option, since no tests are
run in that case.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a command line option to be able to run a single test. This option
(-t) takes a number from the list of tests available with the "-l"
option. Here are two examples:
Run test number 2, the "receive single packet" test in all available modes:
./test_xsk.sh -t 2
Run test number 21, the metadata copy test in skb mode only
./test_xsh.sh -t 21 -m skb
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a command line option (-l) that lists all the tests. The number
before the test will be used in the next commit for specifying a
single test to run. Here is an example of the output:
Tests:
0: SEND_RECEIVE
1: SEND_RECEIVE_2K_FRAME
2: SEND_RECEIVE_SINGLE_PKT
3: POLL_RX
4: POLL_TX
5: POLL_RXQ_FULL
6: POLL_TXQ_FULL
7: SEND_RECEIVE_UNALIGNED
:
:
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Declare the test names statically in a struct so that we can refer to
them when adding the support to execute a single test in the next
commit. Before this patch, the names of them were not declared in a
single place which made it not possible to refer to them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prepare for the capability to be able to run a single test by moving
all the tests to their own functions. This function can then be called
to execute that test in the next commit.
Also, the tests named RUN_TO_COMPLETION_* were not named well, so
change them to SEND_RECEIVE_* as it is just a basic send and receive
test of 4K packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add an option -m on the command line that allows the user to run the
tests in a single mode instead of all of them. Valid modes are skb,
drv, and zc (zero-copy). An example:
To run test suite in drv mode only:
./test_xsk.sh -m drv
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a timeout for the transmission thread. If packets are not
completed properly, for some reason, the test harness would previously
get stuck forever in a while loop. But with this patch, this timeout
will trigger, flag the test as a failure, and continue with the next
test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Print info about every packet in verbose mode, both for Tx and
Rx. This is useful to have when a test fails or to validate that a
test is really doing what it was designed to do. Info on what is
supposed to be received and sent is also printed for the custom packet
streams since they differ from the base line. Here is an example:
Tx addr: 37e0 len: 64 options: 0 pkt_nb: 8
Tx addr: 4000 len: 64 options: 0 pkt_nb: 9
Rx: addr: 100 len: 64 options: 0 pkt_nb: 0 valid: 1
Rx: addr: 1100 len: 64 options: 0 pkt_nb: 1 valid: 1
Rx: addr: 2100 len: 64 options: 0 pkt_nb: 4 valid: 1
Rx: addr: 3100 len: 64 options: 0 pkt_nb: 8 valid: 1
Rx: addr: 4100 len: 64 options: 0 pkt_nb: 9 valid: 1
One pointless verbose print statement is also deleted and another one
is made clearer.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The commit 45b58669e5 ("drm/ssd130x: Allocate buffer in the plane's
.atomic_check() callback") moved the allocation of the intermediate and
HW buffers from the encoder's .atomic_enable callback, to the plane's
.atomic_check callback.
This was suggested by Maxime Ripard, because drivers aren't allowed to
fail after the drm_atomic_helper_swap_state() function has been called.
And the encoder's .atomic_enable happens after the new atomic state has
been swapped, so allocations (that can fail) shouldn't be done there.
But the HW buffer isn't really tied to the plane's state. It has a fixed
size that only depends on the (also fixed) display resolution defined in
the Device Tree Blob.
That buffer can be considered part of the CRTC state, and for this reason
makes more sense to do its allocation in the CRTC .atomic_check callback.
The other allocated buffer (used to store a conversion from the emulated
XR24 format to the native R1 format) is part of the plane's state, since
it will be optional once the driver supports R1 and allows user-space to
set that pixel format.
So let's keep the allocation for it in the plane's .atomic_check callback,
this can't be moved to the CRTC's .atomic_check because changing a format
does not trigger a CRTC mode set.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdWv_QSatDgihr8=2SXHhvp=icNxumZcZOPwT9Q_QiogNQ@mail.gmail.com/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913052938.1114651-1-javierm@redhat.com
For easier maintenance order the included headers in qcom_scm.c
alphabetically.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230913192826.36187-2-bartosz.golaszewski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 'extern' specifier in front of a function declaration has no effect.
Remove all of them from the qcom-scm header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230913192826.36187-1-bartosz.golaszewski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are several PMICs with GPIO nodes and one of the nodes referenced
other's in gpio-ranges which could result in deferred-probes like:
qcom-spmi-gpio c440000.spmi:pmic@2:gpio@8800: can't add gpio chip
Reported-by: Brian Masney <bmasney@redhat.com>
Closes: https://lore.kernel.org/all/ZN5KIlI+RDu92jsi@brian-x1/
Fixes: e5a893a7ce ("arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230818135538.47481-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
It is spurious to bail-out on a wait_for_completion_timeout() call that
does NOT timeout.
Reverse the logic to return -ETIMEDOUT instead, in case of tiemout.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/2ed01020fa8a135c36dbaa871095ded47d926507.1676464968.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
With the configuration PAGE_SIZE 64k and filesystem blocksize 64k,
a problem occurred when more than 13 million files were directly created
under a directory:
EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D.
EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum
When enough files are created, the fake_dirent->reclen will be 0xffff.
it doesn't equal to the blocksize 65536, i.e. 0x10000.
But it is not the same condition when blocksize equals to 4k.
when enough files are created, the fake_dirent->reclen will be 0x1000.
it equals to the blocksize 4k, i.e. 0x1000.
The problem seems to be related to the limitation of the 16-bit field
when the blocksize is set to 64k.
To address this, helpers like ext4_rec_len_{from,to}_disk has already
been introduced to complete the conversion between the encoded and the
plain form of rec_len.
So fix this one by using the helper, and all the other in this file too.
Cc: stable@kernel.org
Fixes: dbe8944404 ("ext4: Calculate and verify checksums for htree nodes")
Suggested-by: Andreas Dilger <adilger@dilger.ca>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Len Brown has reported that system suspend sometimes fail due to
inability to freeze a task working in ext4_trim_fs() for one minute.
Trimming a large filesystem on a disk that slowly processes discard
requests can indeed take a long time. Since discard is just an advisory
call, it is perfectly fine to interrupt it at any time and the return
number of discarded blocks until that moment. Do that when we detect the
task is being frozen.
Cc: stable@kernel.org
Reported-by: Len Brown <lenb@kernel.org>
Suggested-by: Dave Chinner <david@fromorbit.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=216322
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230913150504.9054-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we set the group's trimmed bit in ext4_trim_all_free() based
on return value of ext4_try_to_trim_range(). However when we will want
to abort trimming because of suspend attempt, we want to return success
from ext4_try_to_trim_range() but not set the trimmed bit. Instead
implementing awkward propagation of this information, just move setting
of trimmed bit into ext4_try_to_trim_range() when the whole group is
trimmed.
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230913150504.9054-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is a memory leak reported by kmemleak:
unreferenced object 0xff11000105903b80 (size 64):
comm "mount", pid 3382, jiffies 4295032021 (age 27.826s)
hex dump (first 32 bytes):
04 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffffae86ac40>] __kmalloc_node+0x50/0x160
[<ffffffffaf2486d8>] crypto_alloc_tfmmem.isra.0+0x38/0x110
[<ffffffffaf2498e5>] crypto_create_tfm_node+0x85/0x2f0
[<ffffffffaf24a92c>] crypto_alloc_tfm_node+0xfc/0x210
[<ffffffffaedde777>] journal_init_common+0x727/0x1ad0
[<ffffffffaede1715>] jbd2_journal_init_inode+0x2b5/0x500
[<ffffffffaed786b5>] ext4_load_and_init_journal+0x255/0x2440
[<ffffffffaed8b423>] ext4_fill_super+0x8823/0xa330
...
The root cause was traced to an error handing path in journal_init_common()
when malloc memory failed in register_shrinker(). The checksum driver is
used to reference to checksum algorithm via cryptoapi and the user should
release the memory when the driver is no longer needed or the journal
initialization failed.
Fix it by calling crypto_free_shash() on the "err_cleanup" error handing
path in journal_init_common().
Fixes: c30713084b ("jbd2: move load_superblock() into journal_init_common()")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230911025138.983101-1-lizetao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Similar to the rk817 codec alias that was missing, the rk817 charger
driver is missing a module alias as well. This absence prevents the
driver from autoprobing on OF systems when it is built as a module.
Add the right MODULE_ALIAS to fix this.
Fixes: 11cb8da018 ("power: supply: Add charger driver for Rockchip RK817")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230612143651.959646-2-frattaroli.nicolas@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The driver reads battery properties every 8 seconds. In order to prevent
problems with wrong property values right after resume, trigger an
update of those properties on resuming the system and restart the
8-second interval from there.
Signed-off-by: Maximilian Weigand <mweigand@mweigand.net>
Link: https://lore.kernel.org/r/20230601-rk817_query_at_resume-v1-1-630b0adefbd9@mweigand.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This function is supposed to return 0 for success instead of returning
the val->intval. This makes it the same as the other case statements
in this function.
Fixes: 81196e2e57 ("power: supply: ucs1002: fix some health status issues")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/687f64a4-4c6e-4536-8204-98ad1df934e5@moroto.mountain
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The 'state->im' value will always be non-zero after
the 'while' statement, so the check can be removed.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230912084100.1502379-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'state->im' value will always be non-zero after
the 'while' statement, so the check can be removed.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Signed-off-by: Gavrilov Ilia <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230912084039.1501984-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There's a race condition in the multipath target when retrieve_deps
races with multipath_message calling dm_get_device and dm_put_device.
retrieve_deps walks the list of open devices without holding any lock
but multipath may add or remove devices to the list while it is
running. The end result may be memory corruption or use-after-free
memory access.
See this description of a UAF with multipath_message():
https://listman.redhat.com/archives/dm-devel/2022-October/052373.html
Fix this bug by introducing a new rw semaphore "devices_lock". We grab
devices_lock for read in retrieve_deps and we grab it for write in
dm_get_device and dm_put_device.
Reported-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The cs35l56_pm_ops_i2c_spi struct is only needed if either the
I2C or SPI modules are selected for building. Otherwise it would
be unused bytes, so in that case omit it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230914150918.14505-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use pm_ptr() when setting the pointer to the dev_pm_ops so that it
will be NULL if CONFIG_PM is disabled. This allows the dev_pm_ops to be
compiled out in that case.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230914150918.14505-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmUDGnQPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpDcd4P/3GwyJggb5liDPZsF2pb/sSsFaCmZf1GDOn+
bX8LlPPRoGus73znyf90VQIOokhnDzJvmzTjXSnnTKg8t4gqSjlbyzRoxAqbthYq
EbAiZ4zOiylJx6FEoX09sxInaqImZyHq6l3enUWrwPVQfiac+L2qLAMHKOwXWoqU
DAc0q0+xdlYEwZnsVwJsfbUUwFahhA+5oZUcBaBpJr2OAfDAp46Aso4CMdNorKUb
zQ1XlMkYwWkiopNgyunBAU3gam71o2epaUhj/G04xDy2gQKFIqE6qcyNc9VmEvQq
qWc/GVkNhI6UEXfzW+ebNUsZ60wlafOwRowNKL661ATNlswbdMw9613mkxx+Va87
eGeT7RKg5DQRH4SVivjYJQryiqAXWvv4EzNoBPnH6I91BhavULTcQPgPFion4lvn
imm61DnS7RkZPHbYau3j/yKnXAZuWPg66GqS+d5wobWl0MdkHtPPT8dKIryuuBcz
2wz147Zg4jT26X6AcsflCGEDL1nE4YEsFcDiD0TCjFiFMulH5S3sFa6tLI16CLds
DxBxn3wenj9I5zMuzc5Dyr/zoWHw0hegOyJJwBOPqwpsS0bI722G66jLKbBvR0+B
4kr3lwku96DQNGo0he/TzvO4bJfi56QggBXXv6+87585ydNUInqnf6apumaRi8tY
WArdmx4v
=2hnZ
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.6, take #1
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
