Fix a missed "goto out" to unlock on error to cleanup this splat:
WARNING: lock held when returning to user space!
6.6.0-rc3-lizhijian+ #213 Not tainted
------------------------------------------------
cxl/673 is leaving the kernel with locks still held!
1 lock held by cxl/673:
#0: ffffffffa013b9d0 (cxl_region_rwsem){++++}-{3:3}, at: commit_store+0x7d/0x3e0 [cxl_core]
In terms of user visible impact of this bug for backports:
cxl_region_invalidate_memregion() on x86 invokes wbinvd which is a
problematic instruction for virtualized environments. So, on virtualized
x86, cxl_region_invalidate_memregion() returns an error. This failure
case got missed because CXL memory-expander device passthrough is not a
production use case, and emulation of CXL devices is typically limited
to kernel development builds with CONFIG_CXL_REGION_INVALIDATION_TEST=y,
that makes cxl_region_invalidate_memregion() succeed.
In other words, the expected exposure of this bug is limited to CXL
subsystem development environments using QEMU that neglected
CONFIG_CXL_REGION_INVALIDATION_TEST=y.
Fixes: d1257d098a ("cxl/region: Move cache invalidation before region teardown, and before setup")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20231025085450.2514906-1-lizhijian@fujitsu.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For auto-discovered regions the driver must assign each target to
a valid position in the region interleave set based on the decoder
topology.
The current implementation fails to parse valid decode topologies,
as it does not consider the child offset into a parent port. The sort
put all targets of one port ahead of another port when an interleave
was expected, causing the region assembly to fail.
Replace the existing relative sort with cxl_calc_interleave_pos() that
finds the exact position in a region interleave for an endpoint based
on a walk up the ancestral tree from endpoint to root decoder.
cxl_calc_interleave_pos() was introduced in a prior patch, so the work
here is to use it in cxl_region_sort_targets().
Remove the obsoleted helper functions from the prior sort.
Testing passes on pre-production hardware with BIOS defined regions
that natively trigger this autodiscovery path of the region driver.
Testing passes a CXL unit test using the dev_dbg() calculation test
(see cxl_region_attach()) across an expanded set of region configs:
1, 1, 1+1, 1+1+1, 2, 2+2, 2+2+2, 2+2+2+2, 4, 4+4, where each number
represents the count of endpoints per host bridge.
Fixes: a32320b71f ("cxl/region: Add region autodiscovery")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Link: https://lore.kernel.org/r/3946cc55ddc19678733eddc9de2c317749f43f3b.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Introduce a calculation to find a target's position in a region
interleave. Perform a self-test of the calculation on user-defined
regions.
The region driver uses the kernel sort() function to put region
targets in relative order. Positions are assigned based on each
target's index in that sorted list. That relative sort doesn't
consider the offset of a port into its parent port which causes
some auto-discovered regions to fail creation. In one failure case,
a 2 + 2 config (2 host bridges each with 2 endpoints), the sort
puts all the targets of one port ahead of another port when they
were expected to be interleaved.
In preparation for repairing the autodiscovery region assembly,
introduce a new method for discovering a target position in the
region interleave.
cxl_calc_interleave_pos() adds a method to find the target position by
ascending from an endpoint to a root decoder. The calculation starts
with the endpoint's local position and position in the parent port. It
traverses towards the root decoder and examines both position and ways
in order to allow the position to be refined all the way to the root
decoder.
This calculation: position = position * parent_ways + parent_pos;
applied iteratively yields the correct position.
Include a self-test that exercises this new position calculation against
every successfully configured user-defined region.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/0ac32c75cf81dd8b86bf07d70ff139d33c2300bc.1698263080.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Initial support for the SM4450 platform is introduced, with the Global
Clock Controller and RPMh clock controller additions.
CLK_SET_RATE_PARENT is dropped for clocks with fixed-rate GPLLs, across
a variety of IPQ platforms. On IPQ6018, GPLL0 is a missing parent of
APCS PLL, so this is corrected.
For IPQ6018 the I2C clock for QUP6 was previously omitted, as disabling
it is reported to cause problems for RPM. It's now added, but marked as
critical.
Stromer Plus is introduced, and safe source switching of the a53pll in
IPQ5332 is introduced.
SM8550 Video and GPU clock controllers are switched to use the OLE PLL
configure method, instead of manually specifying additional components
of the l-value.
A couple of fixes related to halt bit checks and SMMU GDSC are
introduced for MSM8998.
A possible integer overflow in the frequency calculation in the RCG code
is addressed.
Clocked managed through RPM are removed from the MSM8996 Global Clock
Controller.
Support for the Camera Clock Controller on SM8550 is added.
PLL configuration for the three HFPLLs in MSM8976 are added.
The MSM8996 CBF clock driver's remove function is transitioned to the
void-returning variant.
-----BEGIN PGP SIGNATURE-----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=6vlw
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom
Pull Qualcomm clk driver updates from Bjorn Andersson:
- Initial support for the SM4450 Global Clock Controller and RPMh clock controllers
- Drop CLK_SET_RATE_PARENT for clocks with fixed-rate GPLLs across a variety of IPQ platforms
- Add missing parent of APCS PLL on IPQ6018
- Add I2C QUP6 clk on IPQ6018 but mark it critical to avoid problems with RPM
- Implement safe source switching for a53pll and use on IPQ5332
- Add support for Stromer Plus PLLs
- Switch SM8550 Video and GPU clock controllers to use OLE PLL configure method
- Non critical fixes to halt bit checks
- Add SMMU GDSC for MSM8998
- Fix possible integer overflow in RCG frequency calculation code
- Remove RPM managed clks from MSM8996 GCC driver
- Add Camera Clock Controller on SM8550
- Add HFPLL configuration for the three HFPLLs in MSM8976
- Switch MSM8996 CBF clock driver's remove function to return void
* tag 'qcom-clk-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (36 commits)
clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: gcc-ipq6018: add QUP6 I2C clock
clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
clk: qcom: clk-alpha-pll: introduce stromer plus ops
clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM
clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: gpucc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: Replace of_device.h with explicit includes
clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
clk: qcom: cbf-msm8996: Convert to platform remove callback returning void
clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
clk: qcom: Add GCC driver support for SM4450
dt-bindings: clock: qcom: Add GCC clocks for SM4450
...
Increase the size of temporary print buffer on stack to fix the
following warnings reported by LKP.
Since all the input parameters of snprintf() are under control
of this driver, it is not possible to trigger and overflow here,
but since the print buffer is on stack and discarded once driver
probe() finishes, it is not an issue to increase it by 10 bytes
and fix the warning in the process. Make it so.
"
drivers/clk/clk-si521xx.c: In function 'si521xx_probe':
>> drivers/clk/clk-si521xx.c:318:26: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
snprintf(name, 6, "DIFF%d", i);
^~
drivers/clk/clk-si521xx.c:318:21: note: directive argument in the range [0, 2147483647]
snprintf(name, 6, "DIFF%d", i);
^~~~~~~~
drivers/clk/clk-si521xx.c:318:3: note: 'snprintf' output between 6 and 15 bytes into a destination of size 6
snprintf(name, 6, "DIFF%d", i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"
Fixes: edc12763a3 ("clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260412.AGASjFN4-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231027085840.30098-1-marex@denx.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Tetsuo reported the following lockdep splat when the TSC synchronization
fails during CPU hotplug:
tsc: Marking TSC unstable due to check_tsc_sync_source failed
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock_irqsave+0x3f/0x60
clocksource_mark_unstable+0x1b/0x90
mark_tsc_unstable+0x41/0x50
check_tsc_sync_source+0x14f/0x180
sysvec_call_function_single+0x69/0x90
Possible unsafe locking scenario:
lock(watchdog_lock);
<Interrupt>
lock(watchdog_lock);
stack backtrace:
_raw_spin_lock+0x30/0x40
clocksource_watchdog+0x23/0x5a0
run_timer_softirq+0x2a/0x50
sysvec_apic_timer_interrupt+0x6e/0x90
The reason is the recent conversion of the TSC synchronization function
during CPU hotplug on the control CPU to a SMP function call. In case
that the synchronization with the upcoming CPU fails, the TSC has to be
marked unstable via clocksource_mark_unstable().
clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is
taken with interrupts enabled in the watchdog timer callback to minimize
interrupt disabled time. That's obviously a possible deadlock scenario,
Before that change the synchronization function was invoked in thread
context so this could not happen.
As it is not crucical whether the unstable marking happens slightly
delayed, defer the call to a worker thread which avoids the lock context
problem.
Fixes: 9d349d47f0 ("x86/smpboot: Make TSC synchronization function call based")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg064ceg.ffs@tglx
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes: e179f69141 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
Remove unused variables from amdgpu_show_fdinfo
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some of the fields that are handled by drm_show_fdinfo() crept back in
when rebasing the patch. Remove them again.
Fixes: 376c25f8ca ("drm/amdgpu: Switch to fdinfo helper")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: <alexander.deucher@amd.com>
Co-developed-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
underflow and overflow interrupts for the RZ/G2L MTU3a driver (Biju
Das)
- Fix a memory leak in the error path when probing the i.MX GPT timer
(Jacky Bai)
- Don't use clk_get_rate() in atomic context as the function might
sleep. Store the clock and use notifiers to receive a clocke rate
change notification (Ivaylo Dimitrov)
- Remove superfluous error message when platform_get_irq() fails
because the underlying function already prints one (Yang Li)
- Add wakeup capability flag for the risc-V ACPI timer (Sunil V L)
- Fix initialization of the TCB timers which are in cascade as the
second timer is reset after the first wraps up leading to
inconsistent scheduler behavior (Ronald Wahl)
- Add DT bindings and driver for Cirrus Logic EP93xx (Nikita Shubin)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmU5LMQACgkQqDIjiipP
6E+R2Af/e+3ViG7JPGxlFk1ihvSPrEpsMG5ypLBaUgaoagzjCCJf9fEwWqS1Wgm/
dAkI+cvQFKLdWpn7bWbXEgenCL+zdm+aTUL/2TS6gGV6452JzR+zWQj5yZ1RsY1+
pM8/+SiC1ynES9RhHM9ihbsvEiznXDfVM3rp2eG4N6RK29Rhs6rUav+rH5CAuVIf
wQhVd28gK5XywIjCe4k5bLGxG+uFxAjIFzPRaa99Xhy06Mhh0NagOZXfKGhjquGd
ZFCOHyLA3gS2yhAwMXsL2mT35Kc6YHyWdjtTT3GU/XNJQOgwU8k9zSmnND8IhHsd
DeAx3qmzU4PipsQdN+rTlYLh5PPOIQ==
=c30J
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.7-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull timer driver updates from Daniel Lezcano:
- Fix DT bindings typos, readability and wrong information about
underflow and overflow interrupts for the RZ/G2L MTU3a driver (Biju
Das)
- Fix a memory leak in the error path when probing the i.MX GPT timer
(Jacky Bai)
- Don't use clk_get_rate() in atomic context as the function might
sleep. Store the clock and use notifiers to receive a clocke rate
change notification (Ivaylo Dimitrov)
- Remove superfluous error message when platform_get_irq() fails
because the underlying function already prints one (Yang Li)
- Add wakeup capability flag for the risc-V ACPI timer (Sunil V L)
- Fix initialization of the TCB timers which are in cascade as the
second timer is reset after the first wraps up leading to
inconsistent scheduler behavior (Ronald Wahl)
- Add DT bindings and driver for Cirrus Logic EP93xx (Nikita Shubin)
avoid to disable gfxhub interrupt when driver is unloaded on gmc 11
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On gfx943 APU, EXT_COHERENT should give MTYPE_CC for local and
MTYPE_UC for nonlocal memory.
On NUMA systems, local memory gets the local mtype, set by an
override callback. If EXT_COHERENT is set, memory will be set as
MTYPE_UC by default, with local memory MTYPE_CC.
Add an option in the override function for this case, and
add a check to ensure it is not used on UNCACHED memory.
V2: Combined APU and NUMA code into one patch
V3: Fixed a potential nullptr in amdgpu_vm_bo_update
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ErrorCodeExt field to identify data parity error in replay mode.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix a typo in parsing of the GC info table header when
reading the IP discovery table.
Fixes: 0e64c9aad0 ("drm/amdgpu: add type conversion for gc info")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An assignment statement was reversed during a refactor which effectively
disabled S/G display outright. Since, we use
adev->mode_info.gpu_vm_support to indicate to the rest of the driver
that S/G display should be enabled and currently it is always set to
false. So, to fix this set adev->mode_info.gpu_vm_support's value to
that of init_data.flags.gpu_vm_support (and not vice versa).
Fixes: 098c13079c ("drm/amd/display: enable S/G display for for recent APUs by default")
Reported-by: Mark Broadworth <mark.broadworth@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the offset into the device when looking for OTP
bits can go outside of the address of the MTD NOR devices,
and if that memory isn't readable, bad things happen
on the IXP4xx (added prints that illustrate the problem before
the crash):
cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x00000100
ixp4xx_copy_from copy from 0x00000100 to 0xc880dd78
cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x12000000
ixp4xx_copy_from copy from 0x12000000 to 0xc880dd78
8<--- cut here ---
Unable to handle kernel paging request at virtual address db000000
[db000000] *pgd=00000000
(...)
This happens in this case because the IXP4xx is big endian and
the 32- and 16-bit fields in the struct cfi_intelext_otpinfo are not
properly byteswapped. Compare to how the code in read_pri_intelext()
byteswaps the fields in struct cfi_pri_intelext.
Adding a small byte swapping loop for the OTP in read_pri_intelext()
and the crash goes away.
The problem went unnoticed for many years until I enabled
CONFIG_MTD_OTP on the IXP4xx as well, triggering the bug.
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231020-mtd-otp-byteswap-v4-1-0d132c06aa9d@linaro.org
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.
Fixes: 1e4d3ba668 ("mtd: rawnand: meson: fix the clock")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231019065548.318443-1-yiyang13@huawei.com
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful by
checking the pointer validity.
Fixes: 0b1039f016 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231019065537.318391-1-yiyang13@huawei.com
The driver doesn't benefit from the advantages that
module_platform_driver_probe() allows (i.e. putting the probe function
in .init.text and the .remove function into .exit.text).
So use module_platform_driver() instead which allows to bind the driver
also after booting (or module loading) and unbinding via sysfs.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231016103540.1566865-2-u.kleine-koenig@pengutronix.de
Mikulas is a long-time contributor to the DM subsystem and has
effectively been a shadow DM maintainer. It is time to formally
name Mikulas as a DM maintainer.
In practice this doesn't imply any process changes for DM maintenance
(Mikulas can still just feed changes and contribute review like
normal).
This change does allow the possibility for Mikulas to take on more
responsibility in actually sending DM changes upstream.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Update DM core's normal IO submission to allocate required memory
using GFP_NOWAIT if REQ_NOWAIT is set.
Tested with simple test provided in commit a9ce385344 ("dm: don't
attempt to queue IO under RCU protection") that was enhanced to check
error codes. Also tested using fio's pvsync2 with nowait=1.
But testing with induced GFP_NOWAIT allocation failures wasn't
performed (yet).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
For "reasons" Intel has code-named this CPU with a "_H" suffix.
[ dhansen: As usual, apply this and send it upstream quickly to
make it easier for anyone who is doing work that
consumes this. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20231025202513.12358-1-tony.luck%40intel.com
alloc_multiple_bios() has the useful ability to try allocating bios
with GFP_NOWAIT but will fallback to using GFP_NOIO. The callers
service both empty flush bios and abnormal bios (e.g. discard).
alloc_multiple_bios() enhancements offered in this commit:
- don't require table_devices_lock if num_bios = 1
- allow caller to pass GFP_NOWAIT to do usual GFP_NOWAIT with GFP_NOIO
fallback
- allow caller to pass GFP_NOIO to _only_ allocate using GFP_NOIO
Flush bios with data may be issued to DM with REQ_NOWAIT, as such it
makes sense to attempt servicing them with GFP_NOWAIT allocations.
But abnormal IO should never be issued using REQ_NOWAIT (if that
changes in the future that's fine, but no sense supporting it now).
While at it, rename __send_changing_extent_only() to
__send_abnormal_io().
[Thanks to both Ming and Mikulas for help with translating known
possible IO scenarios to requirements.]
Suggested-by: Ming Lei <ming.lei@redhat.com>
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
In the current setup the PA is left unmuted even when the
Soundwire ports are not started streaming. This can lead to click
and pop sounds during start.
There is a same issue in the reverse order where in the PA is
left unmute even after the data stream is stopped, the time
between data stream stopping and port closing is long enough
to accumulate DC on the line resulting in Click/Pop noise
during end of stream.
making use of new mute_unmute_on_trigger flag is helping a
lot with this Click/Pop issues reported on this Codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In some setups like Speaker amps which are very sensitive, ex: keeping them
unmute without actual data stream for very short duration results in a
static charge and results in pop and clicks. To minimize this, provide a way
to mute and unmute such codecs during trigger callbacks.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Utilize the integrated 10-bit ADC in Max5970/Max5978 to enable voltage
and current monitoring. This feature is seamlessly integrated through
the hwmon subsystem.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231027152830.1269895-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without this dependency, acp63 fails to link:
x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_audio_remove':
acp63.c:(.text+0x22): undefined reference to `acp_disable_interrupts'
x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_i2s_master_clock_generate.isra.0':
acp63.c:(.text+0x6f): undefined reference to `smn_read'
x86_64-linux-ld: acp63.c:(.text+0x81): undefined reference to `smn_write'
x86_64-linux-ld: acp63.c:(.text+0x8e): undefined reference to `smn_read'
x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_pcm_resume':
acp63.c:(.text+0x230): undefined reference to `restore_acp_i2s_params'
x86_64-linux-ld: acp63.c:(.text+0x23d): undefined reference to `restore_acp_pdm_params'
x86_64-linux-ld: sound/soc/amd/acp/acp63.o: in function `acp63_audio_probe':
acp63.c:(.text+0x474): undefined reference to `acp_enable_interrupts'
Fixes: d4c2d5391d ("ASoC: amd: acp: add Kconfig options for acp6.3 based platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152403.386257-3-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The aw88395_lib module is shared by all the aw883* drivers that
need to select the corresponding Kconfig symbol. The newly added
aw88399 incorrectly selects SND_SOC_AW88399_LIB instead, which
is not defined anywhere in the kernel, causing a link failure when
the actual one is missing:
arm-linux-gnueabi-ld: sound/soc/codecs/aw88399.o: in function `aw88399_codec_probe':
aw88399.c:(.text+0xbc6): undefined reference to `aw88395_dev_load_acf_check'
arm-linux-gnueabi-ld: aw88399.c:(.text+0xbea): undefined reference to `aw88395_dev_cfg_load'
Fixes: 8ade6cc7e2 ("ASoC: codecs: Add aw88399 amplifier driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152403.386257-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
A newly added function requires CONFIG_ACPI to avoid a build error:
sound/soc/amd/acp/acp-legacy-common.c: In function 'check_acp_pdm':
sound/soc/amd/acp/acp-legacy-common.c:401:19: error: implicit declaration of function 'acpi_find_child_device'; did you mean 'acpi_match_device'? [-Werror=implicit-function-declaration]
401 | pdm_dev = acpi_find_child_device(ACPI_COMPANION(&pci->dev), pdm_addr, 0);
| ^~~~~~~~~~~~~~~~~~~~~~
| acpi_match_device
The acp drivers really only work when ACPI is enabled already, so just
avoid the build failure with hard dependency in everything that
enables the acp-legacy-common portion.
Fixes: 3a94c8ad0a ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231027152403.386257-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to support Eve chromebooks add rt5514 configuration to board
lookup table. rt5514 is used for capture in DMIC configuration on SSP 0
and TDM 1.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231027110537.2103712-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 97154bcf4d ("af_unix: Kconfig: make CONFIG_UNIX bool"),
af_unix.c is no longer built as module.
Let's remove unnecessary #if condition, exitcall, and module macros.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20231026212305.45545-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 2 tests to the layout1 fixture:
* topology_changes_with_net_only: Checks that FS topology
changes are not denied by network-only restrictions.
* topology_changes_with_net_and_fs: Make sure that FS topology
changes are still denied with FS and network restrictions.
This specifically test commit d722036403 ("landlock: Allow FS topology
changes for domains without such rule type").
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20231027154615.815134-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Mat Martineau says:
====================
mptcp: Fixes and cleanup for v6.7
This series includes three initial patches that we had queued in our
mptcp-net branch, but given the likely timing of net/net-next syncs this
week, the need to avoid introducing branch conflicts, and another batch
of net-next patches pending in the mptcp tree, the most practical route
is to send everything for net-next.
Patches 1 & 2 fix some intermittent selftest failures by adjusting timing.
Patch 3 removes an unneccessary userspace path manager restriction on
the removal of subflows with subflow ID 0.
The remainder of the patches are all cleanup or selftest changes:
Patches 4-8 clean up kernel code by removing unused parameters, making
more consistent use of existing helper functions, and reducing extra
casting of socket pointers.
Patch 9 removes an unused variable in a selftest script.
Patch 10 adds a little more detail to some mptcp_join test output.
====================
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-0-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just like displaying "invert" after "Info: ", "simult" should be
displayed too when rm_subflow_nr doesn't match the expect value in
chk_rm_nr():
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
rm [ ok ]
rmsf [ ok ] 3 in [2:4]
Info: invert simult
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
rm [ ok ]
rmsf [ ok ]
Info: invert
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-10-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Global var mptcp_connect defined at the front of mptcp_sockopt.sh is
duplicate with local var mptcp_connect defined in do_transfer(), drop
this useless global one.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-9-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'(struct sock *)msk' is used several times in mptcp_nl_cmd_announce(),
mptcp_nl_cmd_remove() or mptcp_userspace_pm_set_flags() in pm_userspace.c,
it's worth adding a local variable sk to point it.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-8-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we move the sk assignment statement ahead in mptcp_nl_cmd_sf_create()
or mptcp_nl_cmd_sf_destroy(), right after the msk null-check statements,
sk can be used after the create_err or destroy_err labels instead of
open-coding it again.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-7-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use mptcp_get_ext() helper defined in protocol.h instead of open-coding
it in mptcp_sendmsg_frag().
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-6-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use __mptcp_check_fallback() helper defined in net/mptcp/protocol.h,
instead of open-coding it in both __mptcp_do_fallback() and
mptcp_diag_fill_info().
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-5-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code using 'ssk' parameter of mptcp_pm_subflow_check_next() has been
dropped in commit "95d6865178 (mptcp: fix subflow accounting on close)".
So drop this useless parameter ssk.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-4-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the ability to send RM_ADDR for local ID 0. Check
whether id 0 address is removed, if not, put id 0 into a removing
list, pass it to mptcp_pm_remove_addr() to remove id 0 address.
There is no reason not to allow the userspace to remove the initial
address (ID 0). This special case was not taken into account not
letting the userspace to delete all addresses as announced.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/379
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-3-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second input parameter of 'wait_rm_addr/sf $1 1' is misused. If it's
1, wait_rm_addr/sf will never break, and will loop ten times, then
'wait_rm_addr/sf' equals to 'sleep 1'. This delay time is too long,
which can sometimes make the tests fail.
A better way to use wait_rm_addr/sf is to use rm_addr/sf_count to obtain
the current value, and then pass into wait_rm_addr/sf.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-2-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some userspace pm tests failed are reported by CI:
112 userspace pm add & remove address
syn [ ok ]
synack [ ok ]
ack [ ok ]
add [ ok ]
echo [ ok ]
mptcp_info subflows=1:1 [ ok ]
subflows_total 2:2 [ ok ]
mptcp_info add_addr_signal=1:1 [ ok ]
rm [ ok ]
rmsf [ ok ]
Info: invert
mptcp_info subflows=0:0 [ ok ]
subflows_total 1:1 [fail]
got subflows 0:0 expected 1:1
Server ns stats
TcpPassiveOpens 2 0.0
TcpInSegs 118 0.0
This patch fixes them by changing 'speed' to 5 to run the tests much more
slowly.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-1-db8f25f798eb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
