Create CDX_BUS and CDX_BUS_CONTROLLER symbol namespace for cdx bus
subsystem. CDX controller modules are required to import symbols from
CDX_BUS_CONTROLLER namespace and other than controller modules to
import from CDX_BUS namespace.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-4-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a mutex lock to prevent race between controller ops initiated by
the bus subsystem and the controller registration/unregistration.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-3-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove xarray list of cdx controller. Instead, use platform bus
to locate the cdx controller using compat string used by cdx
controller platform driver.
Also, use ida to allocate a unique id for the controller.
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-2-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The BeaglePlay board by BeagleBoard.org has a CC1352P7 co-processor
connected to the main AM62 (running Linux) over UART. In the BeagleConnect
Technology, CC1352 is responsible for handling 6LoWPAN communication with
beagleconnect freedom nodes as well as their discovery.
This mcu is used by gb-beagleplay, a Greybus driver for BeaglePlay.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Link: https://lore.kernel.org/r/20231017101116.178041-4-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the Greybus host driver for BeaglePlay board by BeagleBoard.org.
The current greybus setup involves running SVC in a user-space
application (GBridge) and using netlink to communicate with kernel
space. GBridge itself uses wpanusb kernel driver, so the greybus messages
travel from kernel space (gb_netlink) to user-space (GBridge) and then
back to kernel space (wpanusb) before reaching CC1352.
This driver directly communicates with CC1352 (running SVC Zephyr
application). Thus, it simplifies the complete greybus setup eliminating
user-space GBridge.
This driver is responsible for the following:
- Start SVC (CC1352) on driver load.
- Send/Receive Greybus messages to/from CC1352 using HDLC over UART.
- Print Logs from CC1352.
- Stop SVC (CC1352) on driver load.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Link: https://lore.kernel.org/r/20231017101116.178041-3-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add DT bindings for Texas Instruments Simplelink CC1352P7 wireless MCU
BeaglePlay has CC1352P7 co-processor connected to the main AM62 (running
Linux) over UART. In the BeagleConnect Technology, CC1352 is responsible
for handling 6LoWPAN communication with beagleconnect freedom nodes as
well as their discovery.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20231017101116.178041-2-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This binding supported NVMEM cells as subnodes and that syntax is used
by few in-kenel DTS files. Modify binding to allow it.
Reported-by: Rob Herring <robh@kernel.org>
Fixes: c5330723d5 ("dt-bindings: nvmem: move deprecated cells binding to its own file")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20231024171253.19976-2-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This binding supported NVMEM cells as subnodes and that syntax is used
by few in-kenel DTS files. Modify binding to allow it.
Reported-by: Rob Herring <robh@kernel.org>
Fixes: c5330723d5 ("dt-bindings: nvmem: move deprecated cells binding to its own file")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231024171253.19976-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 517f14d9cf.
Config option "no_of_node" is no longer needed since adding a more
explicit and targeted option "add_legacy_fixed_of_cells".
That "no_of_node" config option was needed *earlier* to help mtd's case.
DT nodes of MTD partitions (that are also NVMEM devices) may contain
subnodes. Those SHOULD NOT be treated as NVMEM fixed cells.
To prevent NVMEM core code from parsing subnodes a "no_of_node" option
was added (and set to true in mtd) to make for_each_child_of_node() in
NVMEM a no-op. That was a bit hacky because it was messing with
"of_node" pointer to achieve some side-effect.
With the introduction of "add_legacy_fixed_of_cells" config option
things got more explicit. MTD subsystem simply tells NVMEM when to look
for fixed cells and there is no need to hack "of_node" pointer anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231023102759.31529-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWC core driver exposes the write_dbi2() callback for writing to the
DBI2 registers in a vendor-specific way.
On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be
asserted before writing to any DBI2 registers and deasserted once done.
So, let's implement the callback for the Qcom PCIe EP driver so that the
DBI2 writes are correctly handled in the hardware.
Without this callback, the DBI2 register writes like BAR size won't go
through and as a result, the default BAR size is set for all BARs.
[kwilczynski: commit log, renamed function to match the DWC convention]
Fixes: f55fee56a6 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Cc: stable@vger.kernel.org # 5.16+
There are a few files missing from the list like test_arm_coresight.sh
and arm-coresight.txt so add the missing entries.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231020154103.55936-1-james.clark@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add DEVICE_ID for J721S2 and enable support for endpoints configured
with this DEVICE_ID in the pci_endpoint_test driver.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231020120248.3168406-1-s-vadapalli@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As mentioned in Documentation/process/coding-style.rst:
In source files, separate functions with one blank line. If the function
is exported, the **EXPORT** macro for it should follow immediately after
the closing function brace line.
So inline with guideline move zynqmp_pm_feature export symbol after its
definition.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1698348238-2320426-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
The function fbtft_driver_remove_pdev() (that exists several times as it's
part of a macro expansion) returns zero unconditionally, so it can be
trivially converted to return void without semantic changes.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231026214407.2508590-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
olpc_dcon is the only remaining i2c client device driver declaring
I2C_CLASS_DDC support after the legacy eeprom driver has been removed.
olpc_dcon is only used on olpc devices, connected to an i2c adapter
driven by scx200_acb. This adapter driver declares support for
I2C_CLASS_HWMON and I2C_CLASS_SPD. Therefore we can safely drop
I2C_CLASS_DDC support in olpc_dcon.
That's the last step before I2C_CLASS_DDC can be removed in general.
This patch is solely based on documentation, and I don't have an olpc
device for testing. Therefore some testing would be appreciated before
patch is applied.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/da3070d9-e016-4167-843f-a08d5b2dc1fe@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the occurrences of sprintf usage under vc04_services can be safely
replaced by snprintf, so as to avoid any possible overflow.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20231025122632.307385-4-ricardo@marliere.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix line break at priv->rx_buf[priv->rx_idx] to increase readability.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20231026181821.GA21819@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231024124115.3598090-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update USB_RAW_IOCTL_EVENT_FETCH to also report suspend, resume, reset,
and disconnect events.
This allows the code that emulates a USB device via Raw Gadget to handle
these events. For example, the device can restart enumeration when it
gets reset.
Also do not print a WARNING when the event queue overflows. With these new
events being queued, the queue might overflow if the device emulation code
stops fetching events.
Also print debug messages when a non-control event is received.
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/d610b629a5f32fb76c24012180743f7f0f1872c0.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During device operation, the host might decide to reset a device emulated
via Raw Gadget. In this case, if the device emulation code has endpoint
requests queued, usb_ep_queue will fail with -ESHUTDOWN. Currently, this
disables the Raw Gadget device and makes the emulation code unable to
proceed.
Do not disable the Raw Gadget device if usb_ep_queue fails.
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/3c5df3dddb67623b4aeb11c5546370363e65d8e2.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, if a USB request that was queued by Raw Gadget is interrupted
(via a signal), wait_for_completion_interruptible returns -ERESTARTSYS.
Raw Gadget then attempts to propagate this value to userspace as a return
value from its ioctls. However, when -ERESTARTSYS is returned by a syscall
handler, the kernel internally restarts the syscall.
This doesn't allow userspace applications to interrupt requests queued by
Raw Gadget (which is required when the emulated device is asked to switch
altsettings). It also violates the implied interface of Raw Gadget that a
single ioctl must only queue a single USB request.
Instead, make Raw Gadget do what GadgetFS does: check whether the request
was interrupted (dequeued with status == -ECONNRESET) and report -EINTR to
userspace.
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/0db45b1d7cc466e3d4d1ab353f61d63c977fbbc5.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch removes TRB_FLUSH_ENDPOINT command from driver.
This command is not supported by controller and
USBSSP returns TRB Error completion code for it.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231026073737.165450-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
ast_udc_remove() is one of these functions that return an error code
after doing only a partial cleanup. Replace the core's error message by
a more drastic one and still convert the driver to .remove_new().
Note the only semantic change here is the changed error message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231026221701.2521483-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Orient-Chip OCP96011 is generally compatible with the FSA4480, add a
compatible for it with the fallback on fsa4480.
However the AUX/SBU connections are expected to be swapped compared to
FSA4480, so document this in the data-lanes description.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231020-fsa4480-swap-v2-3-9a7f9bb59873@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some hardware designs the AUX+/- lanes are connected reversed to
SBU1/2 compared to the expected design by FSA4480.
Made more complicated, the otherwise compatible Orient-Chip OCP96011
expects the lanes to be connected reversed compared to FSA4480.
* FSA4480 block diagram shows AUX+ connected to SBU2 and AUX- to SBU1.
* OCP96011 block diagram shows AUX+ connected to SBU1 and AUX- to SBU2.
So if OCP96011 is used as drop-in for FSA4480 then the orientation
handling in the driver needs to be reversed to match the expectation of
the OCP96011 hardware.
Support parsing the data-lanes parameter in the endpoint node to swap
this in the driver.
The parse_data_lanes_mapping function is mostly taken from nb7vpq904m.c.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231020-fsa4480-swap-v2-2-9a7f9bb59873@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow specifying data-lanes to reverse the muxing orientation between
AUX+/- and SBU1/2 where necessary by the hardware design.
In the mux there's a switch that needs to be controlled from the OS, and
it either connects AUX+ -> SBU1 and AUX- -> SBU2, or the reverse: AUX+
-> SBU2 and AUX- -> SBU1, depending on the orientation of how the USB-C
connector is plugged in.
With this data-lanes property we can now specify that AUX+ and AUX-
connections are swapped between the SoC and the mux, therefore the OS
needs to consider this and reverse the direction of this switch in the
mux.
_______ _______
| | |
|-- HP --| |
|-- MIC --| |or
SoC | | MUX |-- SBU1 ---> To the USB-C
Codec |-- AUX+ --| |-- SBU2 ---> connected
|-- AUX- --| |
______| |_____|
(thanks to Neil Armstrong for this ASCII art)
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231020-fsa4480-swap-v2-1-9a7f9bb59873@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is possible that typec_register_partner() returns ERR_PTR on failure.
When port->partner is an error, a NULL pointer dereference may occur as
shown below.
[91222.095236][ T319] typec port0: failed to register partner (-17)
...
[91225.061491][ T319] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000039f
[91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc
[91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc
[91225.308067][ T319] Call trace:
[91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc
[91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8
[91225.355900][ T319] kthread_worker_fn+0x178/0x58c
[91225.355902][ T319] kthread+0x150/0x200
[91225.355905][ T319] ret_from_fork+0x10/0x30
Add a check for port->partner to avoid dereferencing a NULL pointer.
Fixes: 5e1d4c49fb ("usb: typec: tcpm: Determine common SVDM Version")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://lore.kernel.org/r/20231020012132.100960-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scarlett2_add_firmware_version_ctl() may return an error, but the
return value was not being checked. Add the missing check.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 701949cc01 ("ALSA: scarlett2: Add support for reading firmware version")
Link: https://lore.kernel.org/r/ZTuKcXajVnuelBEb@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
