Another variable name which is confusing at best. Convert to bool.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
It reflects a state and not a command. Make it bool while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
It's not longer used outside the source file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
Add the mmc nodes for the StarFive JH7110 SoC.
Set mmc0 node to emmc and set mmc1 node to sd.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Enable DCDC1 node for vmmc-supply and enable ALDO4 node for
vqmmc-supply.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization.
Commit c5a130325f ("ACPI/APEI: Add parameter check before error
injection") exported page_is_ram(), hence the __init annotation should
be removed.
This fixes the modpost warning in ARCH=alpha builds:
WARNING: modpost: vmlinux: page_is_ram: EXPORT_SYMBOL used for init symbol. Remove __init or EXPORT_SYMBOL.
Fixes: c5a130325f ("ACPI/APEI: Add parameter check before error injection")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Currently, if the target residency of the deepest idle state is less than
the tick period length, which is quite likely for HZ=100, and the deepest
idle state is about to be selected by the TEO idle governor, the decision
on whether or not to stop the scheduler tick is based entirely on the
time till the closest timer. This is often insufficient, because timers
may not be in heavy use and there may be a plenty of other CPU wakeup
events between the deepest idle state's target residency and the closest
tick.
Allow the governor to count those events by making the deepest idle
state's bin effectively end at TICK_NSEC and introducing an additional
"bin" for collecting "hit" events (ie. the ones in which the measured
idle duration falls into the same bin as the time till the closest
timer) with idle duration values past TICK_NSEC.
This way the "intercepts" metric for the deepest idle state's bin
becomes nonzero in general, and so it can influence the decision on
whether or not to stop the tick possibly increasing the governor's
accuracy in that respect.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Tested-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Make teo_select() avoid calling tick_nohz_get_sleep_length() if the
candidate idle state to return is state 0 or if state 0 is a polling
one and the target residency of the current candidate one is below
a certain threshold, in which cases it may be assumed that the CPU will
be woken up immediately by a non-timer wakeup source and the timers
are not likely to matter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Tested-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Because the cost of calling tick_nohz_get_sleep_length() may increase
in the future, reorder the code in teo_select() so it first uses the
statistics to pick up a candidate idle state and applies the utilization
heuristic to it and only then calls tick_nohz_get_sleep_length() to
obtain the sleep length value and refine the selection if necessary.
This change by itself does not cause tick_nohz_get_sleep_length() to
be called less often, but it prepares the code for subsequent changes
that will do so.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Tested-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Sometimes [1] users may attempt to setup the Rust support by
checking what Kbuild does and they end up finding out about
`scripts/rust_is_available.sh`. Inevitably, they run the script
directly, but unless they setup the required variables,
the result of the script is not meaningful.
We could add some defaults to the variables, but that could be
confusing for those that may override the defaults (compared
to their kernel builds), and `$CC` would not be a simple default
in any case.
Therefore, instead, explicitly check whether the expected variables
are set (`$RUSTC`, `$BINDGEN` and `$CC`). If not, print an explanation
about the fact that the script is meant to be called from Kbuild,
since that is the most likely cause for the variables not being set.
Link: https://lore.kernel.org/oe-kbuild-all/Y6r4mXz5NS0+HVXo@zn.tnic/ [1]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`scripts/rust_is_available.sh` calls `bindgen` with a special
header in order to check whether the `libclang` version in use
is suitable.
However, the invocation itself may fail if, for instance, `bindgen`
cannot locate `libclang`. This is fine for Kconfig (since the
script will still fail and therefore disable Rust as it should),
but it is pretty confusing for users of the `rustavailable` target
given the error will be unrelated:
./scripts/rust_is_available.sh: 21: arithmetic expression: expecting primary: "100000 * + 100 * + "
make: *** [Makefile:1816: rustavailable] Error 2
Instead, run the `bindgen` invocation independently in a previous
step, saving its output and return code. If it fails, then show
the user a proper error message. Otherwise, continue as usual
with the saved output.
Since the previous patch we show a reference to the docs, and
the docs now explain how `bindgen` looks for `libclang`,
thus the error message can leverage the documentation, avoiding
duplication here (and making users aware of the setup guide in
the documentation).
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/rust-for-linux/CAKwvOdm5JT4wbdQQYuW+RT07rCi6whGBM2iUAyg8A1CmLXG6Nw@mail.gmail.com/
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/934
Reported-by: Alexandru Radovici <msg4alex@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/921
Reported-by: Matthew Leach <dev@mattleach.net>
Closes: https://lore.kernel.org/rust-for-linux/20230507084116.1099067-1-dev@mattleach.net/
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
People trying out the Rust support in the kernel may get
warnings and errors from `scripts/rust_is_available.sh`
from the `rustavailable` target or the build step.
Some of those users may be following the Quick Start guide,
but others may not (likely those getting warnings from
the build step instead of the target).
While the messages are fairly clear on what the problem is,
it may not be clear how to solve the particular issue,
especially for those not aware of the documentation.
We could add all sorts of details on the script for each one,
but it is better to point users to the documentation instead,
where it is easily readable in different formats. It also
avoids duplication.
Thus add a reference to the documentation whenever the script
fails or there is at least a warning.
Reviewed-by: Finn Behrens <fin@nyantec.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
rust_is_available.sh uses cc-version.sh to identify which C compiler is
in use, as scripts/Kconfig.include does. cc-version.sh isn't designed to
be able to handle multiple arguments in one variable, i.e. "ccache clang".
Its invocation in rust_is_available.sh quotes "$CC", which makes
$1 == "ccache clang" instead of the intended $1 == ccache & $2 == clang.
cc-version.sh could also be changed to handle having "ccache clang" as one
argument, but it only has the one consumer upstream, making it simpler to
fix the caller here.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Fixes: 78521f3399 ("scripts: add `rust_is_available.sh`")
Link: https://github.com/Rust-for-Linux/linux/pull/873
[ Reworded title prefix and reflow line to 75 columns. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The -v option is passed when this script is invoked from Makefile,
but not when invoked from Kconfig.
As you can see in scripts/Kconfig.include, the 'success' macro suppresses
stdout and stderr anyway, so this script does not need to be quiet.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230109061436.3146442-1-masahiroy@kernel.org
[ Reworded prefix to match the others in the patch series. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Alice has been involved with the Rust for Linux project for
almost a year now. She has been primarily working on the
Android Binder Driver [1].
In addition, she has been reviewing patches in the mailing
list for some months and has submitted improvements to the
core Rust support.
She is also part of the core maintainer team for the widely
used library Tokio [2], an asynchronous Rust runtime.
Her expertise with the language will be very useful to have
around in the future if Rust grows within the kernel, thus
add her to the `RUST` entry as reviewer.
Link: https://rust-for-linux.com/android-binder-driver [1]
Link: https://tokio.rs [2]
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20230718054521.1048785-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The same checks are repeated in three places to decide whether to use
hwrng. Consolidate these into a helper.
Also this fixes a case that one of them was missing a check in the
cleanup path.
Fixes: 554b841d47 ("tpm: Disable RNG for all AMD fTPMs")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we have merged normal and in-ICB address_space operations, there's
no need to assign aops when expanding from in-ICB format.
Signed-off-by: Jan Kara <jack@suse.cz>
We return 0 for success, or -error when there's an error. Move the 'ret'
variable into the loop where we are actually using it, to make it
clearer that we don't carry this variable forward for return outside of
the loop.
While at it, also move the need_resched() break condition out of the
while check itself, keeping it with the signal pending check.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are tons of io_uring tests and examples in liburing and on the
Internet. If you're looking for a benchmark, io_uring-bench.c is just an
acutely outdated version of fio/io_uring. And for basic condensed init
template for likes of selftests take a peek at io_uring_zerocopy_tx.c.
Kill tools/io_uring/, it's a burden keeping it here.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7c740701d3b475dcad8c92602a551044f72176b4.1691543666.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_req_local_work_add() peeks into the work list, which can be executed
in the meanwhile. It's completely fine without KASAN as we're in an RCU
read section and it's SLAB_TYPESAFE_BY_RCU. With KASAN though it may
trigger a false positive warning because internal io_uring caches are
sanitised.
Remove sanitisation from the io_uring request cache for now.
Cc: stable@vger.kernel.org
Fixes: 8751d15426 ("io_uring: reduce scheduling due to tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c6fbf7a82a341e66a0007c76eefd9d57f2d3ba51.1691541473.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cq_extra is protected by ->completion_lock, which io_get_sqe() misses.
The bug is harmless as it doesn't happen in real life, requires invalid
SQ index array and racing with submission, and only messes up the
userspace, i.e. stall requests execution but will be cleaned up on
ring destruction.
Fixes: 15641e4270 ("io_uring: don't cache number of dropped SQEs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66096d54651b1a60534bb2023f2947f09f50ef73.1691538547.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable io_uring commands on network sockets. Create two new
SOCKET_URING_OP commands that will operate on sockets.
In order to call ioctl on sockets, use the file_operations->io_uring_cmd
callbacks, and map it to a uring socket function, which handles the
SOCKET_URING_OP accordingly, and calls socket ioctls.
This patches was tested by creating a new test case in liburing.
Link: https://github.com/leitao/liburing/tree/io_uring_cmd
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230627134424.2784797-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add KUnit tests that exercise page allocation using page pools
and freeing pages, either by returning them to the pool or
freeing them. Add a basic test for ttm_pool cleanup. Introduce
helpers to create a dummy ttm_buffer_object.
Signed-off-by: Karolina Stolarek <karolina.stolarek@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/427ea373357d0b6cb376c9d7ebc33c930bf1d28a.1691487006.git.karolina.stolarek@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
This version addresses issues with:
- CPU count display for power domain != 0
- Support more than 8 sockets
- Error on max CPU count exceeds in one request
- Prevent trying CPU 0 hotplug for kernel version 6.5 or later
- Change mem-frequency display to max-mem-frequency
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The mem-frequency displayed by each profile is not the actual memory
frequency of DIMMs, but the maximum the CPU can support.
Change the mem-frequency field to max-mem-frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Since commit 2e45528930 ("iommu/vt-d: Unify the way to process DMAR
device scope array") this is not used anymore, so can remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230802133934.19712-1-yuehaibing@huawei.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For the case that VT-d page is smaller than mm page, converting dma pfn
should be handled in two cases which are for start pfn and for end pfn.
Currently the calculation of end dma pfn is incorrect and the result is
less than real page frame number which is causing the mapping of iova
always misses some page frames.
Rename the mm_to_dma_pfn() to mm_to_dma_pfn_start() and add a new helper
for converting end dma pfn named mm_to_dma_pfn_end().
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Link: https://lore.kernel.org/r/20230625082046.979742-1-yanfei.xu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Even the PCI devices don't support pasid capability, PASID table is
mandatory for a PCI device in scalable mode. However flushing cache
of pasid directory table for these devices are not taken after pasid
table is allocated as the "size" of table is zero. Fix it by
calculating the size by page order.
Found this when reading the code, no real problem encountered for now.
Fixes: 194b3348bd ("iommu/vt-d: Fix PASID directory pointer coherency")
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Link: https://lore.kernel.org/r/20230616081045.721873-1-yanfei.xu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The core code now prevents devices with RMRR regions from being assigned
to user space. There is no need to check for this condition in individual
drivers. Remove it to avoid duplicate code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230724060352.113458-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU_RESV_DIRECT flag indicates that a memory region must be mapped
1:1 at all times. This means that the region must always be accessible to
the device, even if the device is attached to a blocking domain. This is
equal to saying that IOMMU_RESV_DIRECT flag prevents devices from being
attached to blocking domains.
This also implies that devices that implement RESV_DIRECT regions will be
prevented from being assigned to user space since taking the DMA ownership
immediately switches to a blocking domain.
The rule of preventing devices with the IOMMU_RESV_DIRECT regions from
being assigned to user space has existed in the Intel IOMMU driver for
a long time. Now, this rule is being lifted up to a general core rule,
as other architectures like AMD and ARM also have RMRR-like reserved
regions. This has been discussed in the community mailing list and refer
to below link for more details.
Other places using unmanaged domains for kernel DMA must follow the
iommu_get_resv_regions() and setup IOMMU_RESV_DIRECT - we do not restrict
them in the core code.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/linux-iommu/BN9PR11MB5276E84229B5BD952D78E9598C639@BN9PR11MB5276.namprd11.prod.outlook.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20230724060352.113458-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Kernel workqueues were disabled due to flawed use of kernel VA and SVA
API. Now that we have the support for attaching PASID to the device's
default domain and the ability to reserve global PASIDs from SVA APIs,
we can re-enable the kernel work queues and use them under DMA API.
We also use non-privileged access for in-kernel DMA to be consistent
with the IOMMU settings. Consequently, interrupt for user privilege is
enabled for work completion IRQs.
Link: https://lore.kernel.org/linux-iommu/20210511194726.GP1002214@nvidia.com/
Tested-by: Tony Zhu <tony.zhu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-9-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the upper layers to set a domain to a PASID of a device
if the PASID feature is supported by the IOMMU hardware. The typical
use cases are, for example, kernel DMA with PASID and hardware
assisted mediated device drivers.
The attaching device and pasid information is tracked in a per-domain
list and is used for IOTLB and devTLB invalidation.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-8-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The domain_flush_pasid_iotlb() helper function is used to flush the IOTLB
entries for a given PASID. Previously, this function assumed that
RID2PASID was only used for the first-level DMA translation. However, with
the introduction of the set_dev_pasid callback, this assumption is no
longer valid.
Add a check before using the RID2PASID for PASID invalidation. This check
ensures that the domain has been attached to a physical device before
using RID2PASID.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-7-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently draining page requests and responses for a pasid is part of SVA
implementation. This is because the driver only supports attaching an SVA
domain to a device pasid. As we are about to support attaching other types
of domains to a device pasid, the prq draining code becomes generic.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-6-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The pasid_mutex was used to protect the paths of set/remove_dev_pasid().
It's duplicate with iommu_sva_lock. Remove it to avoid duplicate code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-5-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The VT-d spec requires to use PASID-based-IOTLB invalidation descriptor
to invalidate IOTLB and the paging-structure caches for a first-stage
page table. Add a generic helper to do this.
RID2PASID is used if the domain has been attached to a physical device,
otherwise real PASIDs that the domain has been attached to will be used.
The 'real' PASID attachment is handled in the subsequent change.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-4-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel ENQCMD requires a single PASID to be shared between multiple
devices, as the PASID is stored in a single MSR register per-process
and userspace can use only that one PASID.
This means that the PASID allocation for any ENQCMD using device driver
must always come from a shared global pool, regardless of what kind of
domain the PASID will be used with.
Split the code for the global PASID allocator into
iommu_alloc/free_global_pasid() so that drivers can attach non-SVA
domains to PASIDs as well.
This patch moves global PASID allocation APIs from SVA to IOMMU APIs.
Reserved PASIDs, currently only RID_PASID, are excluded from the global
PASID allocation.
It is expected that device drivers will use the allocated PASIDs to
attach to appropriate IOMMU domains for use.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-3-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PCIe Process address space ID (PASID) is used to tag DMA traffic, it
provides finer grained isolation than requester ID (RID).
For each device/RID, 0 is a special PASID for the normal DMA (no
PASID). This is universal across all architectures that supports PASID,
therefore warranted to be reserved globally and declared in the common
header. Consequently, we can avoid the conflict between different PASID
use cases in the generic code. e.g. SVA and DMA API with PASIDs.
This paved away for device drivers to choose global PASID policy while
continue doing normal DMA.
Noting that VT-d could support none-zero RID/NO_PASID, but currently not
used.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230802212427.1497170-2-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Similar to ccu_mp, if the current parent rate allows getting the ideal
rate, prefer to not change the parent clock's rate.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20230807-pll-mipi_set_rate_parent-v6-11-f173239a4b59@oltmanns.dev
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
