Fix CPU count display for power domain != 0. In the function
punit_id is always 0, so it never incremented cpu count for power
domain id != 0.
Update punit_id after call to update_punit_cpu_info() to what is
actually received from the kernel.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The commit d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length") added the nla_len check in rtnl_bridge_setlink,
which is the only caller for ndo_bridge_setlink handlers defined in
low-level driver codes. Hence, this patch cleanups the redundant checks in
each ndo_bridge_setlink handler function.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230807091347.3804523-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Fix 2 compile warnings in bnxt_dcb.c
Fix 2 similar warnings in bnxt_dcb.c related to the cos2bw interface
definitions in bnxt_hsi.h.
====================
Link: https://lore.kernel.org/r/20230807145720.159645-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following warning:
drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c: In function ‘bnxt_hwrm_queue_cos2bw_cfg’:
cc1: error: writing 12 bytes into a region of size 1 [-Werror=stringop-overflow ]
In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:19:
drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h:6045:17: note: destination object ‘unused_0’ of size 1
6045 | u8 unused_0;
Fix it by modifying struct hwrm_queue_cos2bw_cfg_input to use an array
of sub struct similar to the previous patch. This will eliminate the
pointer arithmetc to calculate the destination pointer passed to
memcpy().
Link: https://lore.kernel.org/netdev/CACKFLinikvXmKcxr4kjWO9TPYxTd2cb5agT1j=w9Qyj5-24s5A@mail.gmail.com/
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230807145720.159645-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following warning:
inlined from ‘bnxt_hwrm_queue_cos2bw_qcfg’ at drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:165:3,
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror]
__read_overflow2_field(q_size_field, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Modify the FW interface defintion of struct hwrm_queue_cos2bw_qcfg_output
to use an array of sub struct for the queue1 to queue7 fields. Note that
the layout of the queue0 fields are different and these are not part of
the array. This makes the code much cleaner by removing the pointer
arithmetic for memcpy().
Link: https://lore.kernel.org/netdev/20230727190726.1859515-2-kuba@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230807145720.159645-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "loc" value comes from the user and it can be negative leading to an
an array underflow when we check "priv->net_filters[loc].claimed". Fix
this by changing the type to u32.
Fixes: c5d511c495 ("net: bcmasp: Add support for wake on net filters")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/b3b47b25-01fc-4d9f-a6c3-e037ad4d71d7@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The input parameters "lb_priv" and "skb" in lb_htpm_select_tx_port and
lb_hash_select_tx_port are unused, so remove them.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230807012556.3146071-6-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because the getter function in the team_option structure always returns 0,
so change the getter function to void and remove redundant code.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230807012556.3146071-5-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because the init function in the team_option structure always returns 0,
so change the init function to void and remove redundant code.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230807012556.3146071-4-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because linux/errno.h is unreferenced in broadcast and roundrobin
files, so remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230807012556.3146071-3-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
team_nl_fini is only called when the module exits, so add the __exit
modifier to it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230807012556.3146071-2-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christophe Leroy says:
====================
net: fs_enet: Driver cleanup
Over the years, platform and driver initialisation have evolved into
more generic ways, and driver or platform specific stuff has gone
away, leaving stale objects behind.
This series aims at cleaning all that up for fs_enet ethernet driver.
====================
Link: https://lore.kernel.org/r/cover.1691155346.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cpm_dpxxx() macros are now always referring to cpm_muram_xxx() functions
directly since commit 3dd82a1ea7 ("[POWERPC] CPM: Always use new
binding.")
Use cpm_muram_xxx() functions directly so that the cpm_dpxxx() macros
can be removed in the near future.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/2400b3156891adb653dc387fff6393de10cf2b24.1691155347.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct fs_platform_info is only used in fs_enet ethernet driver since
commit 3dd82a1ea7 ("[POWERPC] CPM: Always use new binding.").
Stale prototypes using fs_platform_info were left over in
arch/powerpc/sysdev/fsl_soc.c but they are now removed by
previous patch.
Move struct fs_platform_info into fs_enet.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f882d6b0b7075d0d8435310634ceaa2cc8e9938f.1691155347.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3dd82a1ea7 ("[POWERPC] CPM: Always use new binding.")
removed last use of init_fec_ioports() and init_fcc_ioports().
Remove stale prototypes then don't include anymore fs_enet_pd.h
which was only included to provide fs_platform_info structure
for the prototypes.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f2f2db5dce3242eaa4a2aad6c226ba587fb0f513.1691155347.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CHECK drivers/net/ethernet/freescale/fs_enet/mac-fcc.c
drivers/net/ethernet/freescale/fs_enet/mac-fcc.c:550:9: warning: cast removes address space '__iomem' of expression
drivers/net/ethernet/freescale/fs_enet/mac-fcc.c:550:9: error: subtraction of different types can't work (different address spaces)
CC drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o
CHECK drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:95:31: warning: incorrect type in argument 1 (different base types)
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:95:31: expected unsigned int [noderef] [usertype] __iomem *p
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:95:31: got restricted __be32 [noderef] [usertype] __iomem *dat
...
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:63:31: warning: incorrect type in argument 1 (different base types)
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:63:31: expected unsigned int [noderef] [usertype] __iomem *p
drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c:63:31: got restricted __be32 [noderef] [usertype] __iomem *dir
...
Fix those address space and base type mismatches reported by sparse.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/25c7965e6aeeb6bbe1b6be5a3c2c7125182fcb02.1691155346.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CC drivers/net/ethernet/freescale/fs_enet/fs_enet-main.o
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c: In function 'fs_enet_interrupt':
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c:321:40: warning: variable 'fpi' set but not used [-Wunused-but-set-variable]
Remove that variable.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/90b72c1708bb8ba2b7a1a688e8259e428968364d.1691155346.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f62b5060d6 ("i40e: fix mac address checking") left behind
i40e_validate_mac_addr() declaration.
Also the other declarations are declared but never implemented in
commit 56a62fc868 ("i40e: init code and hardware support").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230804125525.20244-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This was introduced to add a plug based way of signaling nowait issues,
but we have since moved on from that. Kill the old dead code, nobody is
setting it anymore.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original formula was inaccurate:
dd->async_depth = max(1UL, 3 * q->nr_requests / 4);
For write requests, when we assign a tags from sched_tags,
data->shallow_depth will be passed to sbitmap_find_bit,
see the following code:
nr = sbitmap_find_bit_in_word(&sb->map[index],
min_t (unsigned int,
__map_depth(sb, index),
depth),
alloc_hint, wrap);
The smaller of data->shallow_depth and __map_depth(sb, index)
will be used as the maximum range when allocating bits.
For a mmc device (one hw queue, deadline I/O scheduler):
q->nr_requests = sched_tags = 128, so according to the previous
calculation method, dd->async_depth = data->shallow_depth = 96,
and the platform is 64bits with 8 cpus, sched_tags.bitmap_tags.sb.shift=5,
sb.maps[]=32/32/32/32, 32 is smaller than 96, whether it is a read or
a write I/O, tags can be allocated to the maximum range each time,
which has not throttling effect.
In addition, refer to the methods of bfg/kyber I/O scheduler,
limit ratiois are calculated base on sched_tags.bitmap_tags.sb.shift.
This patch can throttle write requests really.
Fixes: 07757588e5 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1691061162-22898-1-git-send-email-zhiguo.niu@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update MAINTAINERS entries with a valid email address as the Microchip
one is no longer valid.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20230804050007.235799-1-claudiu.beznea@tuxon.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add zoned storage support to ublk: report_zones and operations:
- REQ_OP_ZONE_OPEN
- REQ_OP_ZONE_CLOSE
- REQ_OP_ZONE_FINISH
- REQ_OP_ZONE_RESET
- REQ_OP_ZONE_APPEND
The zone append feature uses the `addr` field of `struct ublksrv_io_cmd` to
communicate ALBA back to the kernel. Therefore ublk must be used with the
user copy feature (UBLK_F_USER_COPY) for zoned storage support to be
available. Without this feature, ublk will not allow zoned storage support.
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230804114610.179530-4-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for zoned storage support, move the check for empty `addr`
field into the command handler case statement. Note that the check makes no
sense for `UBLK_IO_NEED_GET_DATA` because the `addr` field must always be
set for this command.
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230804114610.179530-3-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This will be used by ublk zoned storage support.
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230804114610.179530-2-nmi@metaspace.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The iocg can have three throttled metrics: wait, debt, delay. This patch
add missing wait_ms to IocgStat to show the latest wait_ms of iocg.
As we are here, group iocg usage percents "inflt%" and "usage%" together,
and group iocg throttled metrics "wait", "debt" and "delay" together.
Effect after changes:
nvme0n1 RUN per=50.0ms cur_per=177105.713:v1053528.587 busy= +0 vrate=135.00%:270.00% params=ssd_dfl(CQ)
active weight hweight% inflt% usage% wait debt delay
InterfererGroup0 * 100/ 100 54.28/ 9.09 0.34 24.07 0.00 0.00 0.00
interfered * 84/ 1000 45.72/ 90.91 0.48 41.09 0.00 0.00 0.00
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230804065039.8885-3-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The real vrate iocost inuse is not base_vrate, but the atomic vtime_rate.
We need iocost_monitor tool to display this real vrate that iocost use,
to check if the boosted compensated vrate is normal.
Effect after change:
nvme0n1 RUN per=50.0ms cur_per=172116.580:v1040587.433 busy= +0 \
vrate=135.00%:270.00% params=ssd_dfl(CQ)
^
|
this is real vrate inuse
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230804065039.8885-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When I use iocost_monitor on nvme0n1, this error shows up:
"Could not find ioc for nvme0n1"
There is no kobj in struct queue in recent kernel, it seems that the commit
2bd85221a6 ("block: untangle request_queue refcounting from sysfs")
move the queue kobj to struct gendisk.
Fix it by using mq_kobj which is at the same level with queue kobj.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20230804065039.8885-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When cs35l56_system_resume() needs to reload firmware it should call
wm_adsp_power_down() to put cs_dsp into a powered-down state before
cs35l56_secure_patch() or cs35l56_patch() calls wm_adsp_power_up().
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support self-booting DSPs that operate outside of a conventional DAPM
event life cycle expose a companion function to wm_adsp_power_up() so
that the correct state of the DSP firmware and controls can be recorded.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L56 could be hard-reset during a system suspend-resume cycle,
either by the codec driver, in cs35l56_system_resume_early(), or by ACPI.
After a hard reset the driver must wait for the control port to be ready
(datasheet tIRS time) before attempting to access the CS35L56.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI setting for a GPIO default state has higher priority than the
flag passed to devm_gpiod_get_optional() so ACPI can override the
GPIOD_OUT_LOW. Explicitly set the GPIO low when hard resetting.
Although GPIOD_OUT_LOW can't be relied on this doesn't seem like a
reason to stop passing it to devm_gpiod_get_optional(). So we still pass
it to state our intent, but can deal with it having no effect.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Re-implement setting of ASP TDM slots so that only the common loop to
build the register word is factored out.
The original cs35l56_set_asp_slot_positions() had an apparent
uninitialized variable if the passed register address was neither of the
ASP slot registers. In fact this would never happen because the calling
code passed valid registers.
While it's trivial to initialize the variable or add a default case,
actually the only common code was the loop at the end of the function,
which simply manipulates some mask values and is identical for either
register. Factoring out the regmap_write() didn't really gain anything.
So instead re-implement the code to replace the original function with
cs35l56_make_tdm_config_word() that only does the loop, and change the
calling code to call regmap_write() directly.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230808164702.21272-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The BUILD_VDSO macro was incorrectly spelled as BULID_VDSO in
asm/linkage.h. This causes the !defined(BULID_VDSO) directive to always
evaluate to true.
Correct the spelling to BUILD_VDSO.
Fixes: bea75b3389 ("x86/Kconfig: Introduce function padding")
Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230808182353.76218-1-jinghao@linux.ibm.com
Three LSMs register the implementations for the "capget" hook: AppArmor,
SELinux, and the normal capability code. Looking at the function
implementations we may observe that the first parameter "target" is not
changing.
Mark the first argument "target" of LSM hook security_capget() as
"const" since it will not be changing in the LSM hook.
cap_capget() LSM hook declaration exceeds the 80 characters per line
limit. Split the function declaration to multiple lines to decrease the
line length.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Acked-by: John Johansen <john.johansen@canonical.com>
[PM: align the cap_capget() declaration, spelling fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use rseq_unqual_scalar_typeof() rather than typeof() in macros to remove
the volatile qualifier (if there is one in the input argument), thus
generating better assembly code in those scenarios.
Also add extra brackets around the "p" parameter in RSEQ_READ_ONCE(),
RSEQ_WRITE_ONCE(), and rseq_unqual_scalar_typeof() across architectures
to preserve expectations of operator priority. Here is an example that
shows how operator priority may be an issue with missing parentheses:
#define m(p) \
do { \
__typeof__(*p) v = 0; \
} while (0)
void fct(unsigned long long *p1)
{
m(p1 + 1); /* works */
m(1 + p1); /* broken */
}
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The arm64 load-acquire/store-release macros from the Linux kernel rseq
selftests are buggy. Remplace them by a working implementation.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow defining variables and perform cast with a typeof which removes
the volatile and const qualifiers.
This prevents declaring a stack variable with a volatile qualifier
within a macro, which would generate sub-optimal assembler.
This is imported from the "librseq" project.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Ensure that the basic percpu ops tests are effectively built against
mm_cid.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The last usage of PROF_{ADD,REPLACE} were removed by commit 18e99f191a
("apparmor: provide finer control over policy management"). So remove
these two unused macros.
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
After changes in commit 33bf60cabc ("LSM: Infrastructure management of
the file security"), aa_alloc_file_ctx() and aa_free_file_ctx() are no
longer used, so remove them, and also remove aa_get_file_label() because
it seems that it's never been used before.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The implementions of these declarations do not exist, remove them all.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
