The DMA widget ops are almost similar to the HDaudio ones, with the
exception of codec_dai_set_hext_stream() which is not relevant and the
format calculation which isn't dependent on the codec dai.
The DMA ops can be selected only starting with ACE_2_0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the LunarLake hardware, the default IP ownership changed to the
host driver, instead of the firmware in previous generation.
In the absence of any capability negotiation, we need to assume a
fixed partitioning between host driver and firmware. The OFLEN bit
needs to be set as early as possible for resources handled by the
firmware, since we can't control when the firmware might try to access
the resources.
For now DMIC and SSP are handled by the DSP firmware. SoundWire is a
separate case, the OFLEN bit can be set when starting-up and resuming
the aux device for each link.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It was just a matter of time before we found a case where we needed
separate ops for MTL and LNL. For LNL we need to set the DMIC/SSP
OFLEN bit in the probe and resume steps, and this can only be done
cleanly with separate ops.
The function prototypes in mtl.h were added in the same order as their
implementation in mtl.c.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add initial support for Lunarlake. For now only HDAudio interfaces are
supported, DMIC/SSP/SoundWire require additional work so that the DAIs
reuse the HDaudio DMA stream allocation.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All interfaces are accessible without the DSP and rely on the HDaudio
DMA only.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The initial code had a logic flaw where the gateway config length kept
increasing after each playback/capture trigger, with the DMA config
TLV being added at every call of sof_ipc4_prepare_copier_module()
This didn't cause any issues with regular playback/capture, but this
was flagged as an error by firmware in the case of multiple amplifiers
on different links.
Fixes: a0659f81c3 ("ASoC: SOF: ipc4-topology: add DMA config TLV to IPC data")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a pipeline contains multiple DAI widgets, the pipe_widget is not
set up except for the first DAI. This result in the pipe_widget having
a default instance 0, which can conflict with another real the
pipeline instance 0 and leads to spurious transitions.
This patch makes sure the instance_id is properly initialized to a
-EINVAL value.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Likely a combination of copy-paste and test coverage problem. Oops.
Fixes: 87a6ddc0cf ("ASoC: SOF: Intel: hda-mlink: program SoundWire LSDIID registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HCHAN parameter should be the highest channel number, not the
channel count.
While we're at it, handle LCHAN with the dual __ffs helper.
Fixes: ccc2f0c1b6 ("ASoC: SOF: Intel: hda-mlink: add helper to program SoundWire PCMSyCM registers")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230807210959.506849-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mesa stopped using these pretty early in a6xx bringup[1]. Take advantage
of this to disallow some legacy UABI.
[1] 7ef722861b
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Patchwork: https://patchwork.freedesktop.org/patch/551175/
The adreno_is_a20x() and adreno_is_a225() functions rely on the
GPU revision, but such information is retrieved inside adreno_gpu_init(),
which is called afterwards.
Fix this problem by caling adreno_gpu_init() earlier, so that
the GPU information revision is available when adreno_is_a20x()
and adreno_is_a225() run.
Tested on a imx53-qsb board.
Fixes: 21af872cd8 ("drm/msm/adreno: add a2xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543456/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Change the order of region allocations to make the addresses match
downstream. This shouldn't matter very much, but helps eliminate one
more difference when comparing register accesses.
Also, make the log region 16K long. That's what it is, unconditionally
on A6xx and A7xx.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543338/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The GMU force shutdown sequence involves some additional register cleanup
which was not implemented previously. Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543340/
Signed-off-by: Rob Clark <robdclark@chromium.org>
While it's not very well understood, there is some sort of a fault
handler implemented in the GMU firmware which triggers when a certain
bit is set, resulting in the M3 core not booting up the way we expect
it to.
Write a magic value to a magic register to hopefully prevent that
from happening.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543335/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some specific SKUs leave certain protection range registers empty.
Allow for that behavior.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543334/
Signed-off-by: Rob Clark <robdclark@chromium.org>
We have the necessary information, so explain which bit does what.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543332/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a definition of the GMU_AHB_FENCE_STATUS_CLR reg and CP_PROTECT_CNTL
bitfields.
This may be substituted with a mesa header sync.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543330/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The range is actually len+1.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/545099/
Since the revision becomes an opaque identifier with future GPUs, move
away from treating different ranges of bits as having a given meaning.
This means that we need to explicitly list different patch revisions in
the device table.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549782/
Let's just stash it in adreno_platform_config rather than looking it up
in N different places.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549777/
This is used in a few places, including one that is parsed by userspace
tools. So let's standardize it a bit better.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549774/
Sometimes it is useful to know the sub-generation (or "family"). And in
any case, this helps us get away from infering the generation from the
numerical chip-id.
v2: Fix is_a2xx() typo
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549773/
All of these are derivatives of a630.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549770/
This simplifies the code.
v2: Use a table of structs instead of flat uint32_t[]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549769/
There are cases where there are differences due to SoC integration.
Such as cache-coherency support, and (in the next patch) e-fuse to
speedbin mappings.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549767/
It is better to explicitly list it. With the move to opaque chip-id's
for future devices, we should avoid trying to infer things like
generation from the numerical value.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549765/
Rather than just open coding a list of gpu-id matches.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549764/
This just duplicates what is in adreno_info, and can cause confusion if
used before it is set.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549761/
Even in the ocmem case, the allocated ocmem buffer size should match the
requested size.
v2: Move stray hunk to previous patch, make OCMEM size mismatch an error
condition.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549759/
No real need to have marketing names in the kernel.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549757/
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-4-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-3-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Report VBIOS version in vbios_version sysfs node instead of part number.
Part number remains constant for a SKU type.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix a regression in blank pixel data caused by coding mistake
- Fix a bug when searching for insert_above_mpcc
- Update add plane to context logic with a new algorithm
- Adjust visual confirm dpp height offset to be 1/240 of v addressable
- Add interface to enable DPIA trace
- Support plane clip with zero recout size
- Blocking invalid 420 modes on HDMI TMDS for DCN31 and DCN314
- Make mpc32 functions available to future DCNs
- Change HDCP update sequence for DM
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor the sequence in hdcp_update_display() to use
mod_hdcp_update_display().
Previous sequence:
- remove()->add()
This Sequence was used to update the display, (mod_hdcp_update_display
didn't exist at the time). This meant for any hdcp updates (type changes,
enable/disable) we would remove, reconstruct, and add. This leads to
unnecessary calls to psp eventually
New Sequence using mod_hdcp_update_display():
- add() once when stream is enabled
- use update() for all updates
The update function checks for prev == new states and will not
unnecessarily end up calling psp via add/remove.
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Secondary DPP pipes are used for rendering secondary layers of planes.
The name "for layer" doesn't make it obvious. The function is acquiring
a free pipe as secondary dpp pipe only. We rename it so it is more obvious.
In a future follow up change, we want to add functions to acquire free pipe as
opp head pipe or otg master pipe as well. They will have their separate
allocation priority.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
generic dc resource file should not know what an optimal idle pipe is
because this is dcn hardware dependent.
[how]
We move the optimial pipe searching logic in dcn specific layer.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In overclocking scenarios the max memclk could be higher
than the DC mode limit. However, for configs that don't
support MCLK switching we need to set the max memclk to
the overclocked max instead of the DC mode max or we
could result in underflow.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new vendor ID code for reference
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mike Hsieh <mike.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
HDMI TMDS does not have ODM support. Filtering 420 modes that
exceed the 4096 FMT limitation on DCN314 will resolve
intermittent corruptions issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
HDMI TMDS does not have ODM support. Filtering 420 modes that
exceed the 4096 FMT limitation on DCN31 will resolve
intermittent corruptions issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Revert commit 6917b0b711 ("drm/amd/display: Read down-spread percentage from lut to adjust dprefclk.")
This change was causing 240hz display to not light up after s0i3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
With previous ODM + MPO policy we will only allocate pipes when MPO plane
has intersection with current ODM slice. With this policy we have to indicate
scaling change when plane clip is updated in case plane clip change causes
MPO plane to go in or out current ODM slice.
With new ODM + MPO policy we allocate pipe independent from plane clip size
so we no longer treat it as a scaling change. There no need to do a full update
due to clip size change anymore.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For timing with large v addressable visual confirm is just too small. It is difficult
to tell visually which DPP we are using. On the other hand with timing with small
v addressable visual confirm is too large and covers the UI area.
[how]
We calculate visual confirm dpp height offset based on v addressable so it stays
relatively the same height i.e. 1/240 verticle portion of the screen.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Preivous algorithm for finding an optimal idle pipe for a new plane was
implemented to handle dynamic pipe allocation when MPO plane moves
from one ODM slice to the other. Now pipe allocation is more static so
it no longer depends on the MPO plane's position. We are simplifying
our logic and remove unnecessary handling in our code.
[how]
Apply a new simplified version of pipe resource allocation logic to reduce
unnecessary flip delay caused by swapping secondary dpp pipe to other
MPC blending tree.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We only acquire MPO pipe for blending tree where the plane clip will
be rendered. If an MPO plane is outside current ODM slice rect, we will
skip pipe allocation. With new programming policy we want to allocate
pipes for every ODM slice blending tree even for those whose ODM slice
rect doesn't intersect with plane clip. This is aligned with DML validation
so the pipe topology is programmed independently from the plane's
position and dst plane size.
[how]
- Remove the logic to allocate pipe only when the MPO plane intersects
with ODM slice and replace with the new logic to always allocate pipes.
- Remove the logic to tear down ODM configuration in favor for supporting
secondary MPO planes.
- Remove the logic to use full update when MPO goes accross ODM slice
boundary.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If plane clip is outside current pipe's ODM slice rect, our logic will
fail validation because we assume that when a pipe is acquired
to support a plane clip, it must blend some portion of the plane
on the screen. This assumption needs to be changed.
When a pipe is acquired to render the plane, we are now allowing
it to support a case where it can take minimum viewport and draw
with zero recout size when the plane clip is outside current ODM
slice rect. The reason is that we want to allocate and get the pipe
pre-programmed so it is ready to be rendered when user moves
the plane over to the current ODM slice with a fast update.
Whereas with the existing solution when user moves the plane
over, we will need to allocate a pipe as needed and power it up
and program it through a full update. This not only impacts the
user experience with unnecessary delay of a frame but also
doesn't generate any benefit to the user because DML doesn't
support it. DML will invalidate based on worst case scenario and
it doesn't depend on the plane location. So having our
programming sequence support such dynamic pipe allocation is
not meaningful anyway.
[how]
In build scaler params allow recout to be zero size and if viewport
is smaller than minimum, set minimum viewport size.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
