Since platform_get_irq() never returned zero, so it need not to check
whether it returned zero, and we use the return error code of
platform_get_irq() to replace the current return error code, for that
platform_get_irq() may return -EINVAL or -ENXIO.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230803085056.30888-1-wangzhu9@huawei.com
Convert platform_get_resource_byname() + devm_ioremap_resource() to a
single call to devm_platform_ioremap_resource_byname(), as this is
exactly what this function does.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230802013500.1030853-1-lizetao1@huawei.com
The logic is way too convoluted, let's clean the kref_get/put section to
clarify what this block does when using CONFIG_MTD_PARTITIONED_MASTER:
- Iterate through all the parent mtd devices
- Grab a reference over them all but the master
- Only grab the master whith CONFIG_MTD_PARTITIONED_MASTER
Same logic must apply in the put path, otherwise it would be broken.
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Fixes: 19bfa9ebeb ("mtd: use refcount to prevent corruption")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/linux-mtd/20230731090903.770277-1-miquel.raynal@bootlin.com
I case of partition device_unregister() in mtd_device_release()
calls mtd_release() which frees mtd_info structure for partition.
All code after device_unregister in mtd_device_release thus
uses already freed memory.
Move part of code to mtd_release() and restict mtd->dev cleanup
to non-partion object.
For partition object such cleanup have no sense as partition
mtd_info is removed.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Fixes: 19bfa9ebeb ("mtd: use refcount to prevent corruption")
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230731115836.542747-1-alexander.usyskin@intel.com
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230803-dt-header-cleanups-for-soc-v2-22-d8de2cc88bff@kernel.org
Signed-off-by: Michal Simek <michal.simek@amd.com>
Currently MHI loads the firmware image from the path provided by client
devices. ath11k needs to support firmware image embedded along with meta
data (named as firmware-2.bin). So allow the client driver to request the
firmware file from user space on it's own and provide the firmware image
data and size to MHI via a pointer struct mhi_controller::fw_data.
This is an optional feature, if fw_data is NULL MHI load the firmware using
the name from struct mhi_controller::fw_image string as before.
Tested with ath11k and WCN6855 hw2.0.
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230727100430.3603551-2-kvalo@kernel.org
[mani: wrapped commit message to 75 columns]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
This code doesn't check for lsdc_bo_create() failure and it could lead
to a crash. It can fail for a variety of reasons, but the most common
cause would be low memory. Add a check.
Fixes: f39db26c54 ("drm: Add kms driver for loongson display controller")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/ZLeijglIMPve2Iio@kadam
Remove duplicated DTC_FLAGS_<board> := -@ entries which intends to enable
the building of device tree overlays.
Commit 724ba67515 ("ARM: dts: Move .dts files to vendor sub-directories")
added those entries at the beginning of file w/o removing the already
available entries spread though file.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230721053918.33944-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Add CPU frequency scaling, and also add the corresponding memory and
cache bandwidths for each frequency.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20230802011548.387519-9-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the interconnect node for L3 cache on SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230802011548.387519-8-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use u32 as the output parameter type in security_get_classes() and
security_get_permissions(), based on the type of the symtab nprim
member.
Declare the read-only class string parameter of
security_get_permissions() const.
Avoid several implicit conversions by using the identical type for the
destination.
Use the type identical to the source for local variables.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: cleanup extra whitespace in subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use u32 for ebitmap bits and sensitivity levels, char for the default
range of a class.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: description tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use the identical type u32 for the loop iterator.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: remove extra whitespace in subject]
Signed-off-by: Paul Moore <paul@paul-moore.com>
- Fixes for request_queue state (Ming)
- Another uuid quirk (August)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE3Fbyvv+648XNRdHTPe3zGtjzRgkFAmTLvkMACgkQPe3zGtjz
RglPmhAAkj5xv1UO4nga4i+GHgjl07Eohi8C4tYWiRae6K2bzl1sQsKRbtaDKBY3
RmAZ2kZIJteDso6RTYqzAffSLHLRav3gs4gxoEgETAVlqSqhNGp7xoi8YdajK5As
h1dl6P1Whs4p0CH118GNtPvYcKo+p9SVpR8bTqSlWUGNu0L/auf/B8/E5SaEScbe
ovqElpcgvAmBFCo9LiHpEph8bDMeQRsJRIomEFJU98BwM35VMe0H3lbmw9pgBEny
cZOTXf+AznBJWUwZ+gQtvGPO8r8QVlwgHtT3SVBDMRZjkQLnKXZpgU9btlOMBCNv
IaLCVTOfIKTihM5wxRByx1OJx4DHVM2oGn/06RR38+TkQUgaIUHqWY9Po4fY21C0
gHe28iFNJHMKyznjepNnKHDS28ZTMk2taD8EbR2ke8Kba8HWv4hNRIHJ/PvJHwJW
mWuCwQA0hvUrL2HrnlU1sVJt5+zu3mE9dfp2YbhCE/vVLp5+SYnQkRm6TVtob6D4
7Qmj/I4QkxuZs7XIgXaA8bHH5NPH4Ga2j3WFxQA3Pvp7ZXTnRbbVUWHrD+N7i1cM
cNLfSGww5SZAvgzBM17UcA/MxKHENfZM0O9A/4hlZwH544n21aQAefv19yqTLfBE
e0CE0+htpxgBJL1DmakMl7FJIpl4eQfhwH3C24sBaG5u/w/mMcE=
=YQ2k
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.5-2023-08-02' of git://git.infradead.org/nvme into block-6.5
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.5
- Fixes for request_queue state (Ming)
- Another uuid quirk (August)"
* tag 'nvme-6.5-2023-08-02' of git://git.infradead.org/nvme:
nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G
nvme-rdma: fix potential unbalanced freeze & unfreeze
nvme-tcp: fix potential unbalanced freeze & unfreeze
nvme: fix possible hang when removing a controller during error recovery
Commit 5aa83a4c0a (" [PATCH] remove two obsolete net drivers") remove fmv18x_probe().
And commmit 01f4685797 ("eth: amd: remove NI6510 support (ni65)") leave ni65_probe().
Commit a10079c662 ("staging: remove hp100 driver") remove hp100 driver and hp100_probe()
declaration is not used anymore.
sonic_probe() and iph5526_probe() are never implemented since the beginning of git history.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230802130716.37308-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting a kernel with CONFIG_MISDN_DSP=y and CONFIG_CFI_CLANG=y,
there is a failure when dsp_cmx_send() is called indirectly from
call_timer_fn():
[ 0.371412] CFI failure at call_timer_fn+0x2f/0x150 (target: dsp_cmx_send+0x0/0x530; expected type: 0x92ada1e9)
The function pointer prototype that call_timer_fn() expects is
void (*fn)(struct timer_list *)
whereas dsp_cmx_send() has a parameter type of 'void *', which causes
the control flow integrity checks to fail because the parameter types do
not match.
Change dsp_cmx_send()'s parameter type to be 'struct timer_list' to
match the expected prototype. The argument is unused anyways, so this
has no functional change, aside from avoiding the CFI failure.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308020936.58787e6c-oliver.sang@intel.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: e313ac12eb ("mISDN: Convert timers to use timer_setup()")
Link: https://lore.kernel.org/r/20230802-fix-dsp_cmx_send-cfi-failure-v1-1-2f2e79b0178d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
err and tlinks is assigned first, so it does not need to initialize the
assignment.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230804175929.2867-1-kunyu@nfschina.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Skip writes to MSR_AMD64_TSC_RATIO that are done in the context of a vCPU
if guest state isn't loaded, i.e. if KVM will update MSR_AMD64_TSC_RATIO
during svm_prepare_switch_to_guest() before entering the guest. Checking
guest_state_loaded may or may not be a net positive for performance as
the current_tsc_ratio cache will optimize away duplicate WRMSRs in the
vast majority of scenarios. However, the cost of the check is negligible,
and the real motivation is to document that KVM needs to load the vCPU's
value only when running the vCPU.
Link: https://lore.kernel.org/r/20230729011608.1065019-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the @offset and @multiplier params from the kvm_x86_ops hooks for
propagating TSC offsets/multipliers into hardware, and instead have the
vendor implementations pull the information directly from the vCPU
structure. The respective vCPU fields _must_ be written at the same
time in order to maintain consistent state, i.e. it's not random luck
that the value passed in by all callers is grabbed from the vCPU.
Explicitly grabbing the value from the vCPU field in SVM's implementation
in particular will allow for additional cleanup without introducing even
more subtle dependencies. Specifically, SVM can skip the WRMSR if guest
state isn't loaded, i.e. svm_prepare_switch_to_guest() will load the
correct value for the vCPU prior to entering the guest.
This also reconciles KVM's handling of related values that are stored in
the vCPU, as svm_write_tsc_offset() already assumes/requires the caller
to have updated l1_tsc_offset.
Link: https://lore.kernel.org/r/20230729011608.1065019-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly disable preemption when writing MSR_AMD64_TSC_RATIO only in the
"outer" helper, as all direct callers of the "inner" helper now run with
preemption already disabled. And that isn't a coincidence, as the outer
helper requires a vCPU and is intended to be used when modifying guest
state and/or emulating guest instructions, which are typically done with
preemption enabled.
Direct use of the inner helper should be extremely limited, as the only
time KVM should modify MSR_AMD64_TSC_RATIO without a vCPU is when
sanitizing the MSR for a specific pCPU (currently done when {en,dis}abling
disabling SVM). The other direct caller is svm_prepare_switch_to_guest(),
which does have a vCPU, but is a one-off special case: KVM is about to
enter the guest on a specific pCPU and thus must have preemption disabled.
Link: https://lore.kernel.org/r/20230729011608.1065019-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating nested SVM transitions, use the outer helper for writing
the TSC multiplier for L2. Using the inner helper only for one-off cases,
i.e. for paths where KVM is NOT emulating or modifying vCPU state, will
allow for multiple cleanups:
- Explicitly disabling preemption only in the outer helper
- Getting the multiplier from the vCPU field in the outer helper
- Skipping the WRMSR in the outer helper if guest state isn't loaded
Opportunistically delete an extra newline.
No functional change intended.
Link: https://lore.kernel.org/r/20230729011608.1065019-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When emulating nested VM-Exit, load L1's TSC multiplier if L1's desired
ratio doesn't match the current ratio, not if the ratio L1 is using for
L2 diverges from the default. Functionally, the end result is the same
as KVM will run L2 with L1's multiplier if L2's multiplier is the default,
i.e. checking that L1's multiplier is loaded is equivalent to checking if
L2 has a non-default multiplier.
However, the assertion that TSC scaling is exposed to L1 is flawed, as
userspace can trigger the WARN at will by writing the MSR and then
updating guest CPUID to hide the feature (modifying guest CPUID is
allowed anytime before KVM_RUN). E.g. hacking KVM's state_test
selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105
nested_svm_vmexit+0x6af/0x720 [kvm_amd]
Call Trace:
nested_svm_exit_handled+0x102/0x1f0 [kvm_amd]
svm_handle_exit+0xb9/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
? trace_hardirqs_off+0x4d/0xa0
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Unlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled check
into the if-statement is wrong as KVM needs to ensure L1's multiplier is
loaded in the above scenario. Alternatively, the WARN_ON() could simply
be deleted, but that would make KVM's behavior even more subtle, e.g. it's
not immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO when
checking only tsc_ratio_msr.
Fixes: 5228eb96a4 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check for nested TSC scaling support on nested SVM VMRUN instead of
asserting that TSC scaling is exposed to L1 if L1's MSR_AMD64_TSC_RATIO
has diverged from KVM's default. Userspace can trigger the WARN at will
by writing the MSR and then updating guest CPUID to hide the feature
(modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking
KVM's state_test selftest to do
vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0);
vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR);
after restoring state in a new VM+vCPU yields an endless supply of:
------------[ cut here ]------------
WARNING: CPU: 164 PID: 62565 at arch/x86/kvm/svm/nested.c:699
nested_vmcb02_prepare_control+0x3d6/0x3f0 [kvm_amd]
Call Trace:
<TASK>
enter_svm_guest_mode+0x114/0x560 [kvm_amd]
nested_svm_vmrun+0x260/0x330 [kvm_amd]
vmrun_interception+0x29/0x30 [kvm_amd]
svm_invoke_exit_handler+0x35/0x100 [kvm_amd]
svm_handle_exit+0xe7/0x180 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm]
kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm]
__se_sys_ioctl+0x7a/0xc0
__x64_sys_ioctl+0x21/0x30
do_syscall_64+0x41/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x45ca1b
Note, the nested #VMEXIT path has the same flaw, but needs a different
fix and will be handled separately.
Fixes: 5228eb96a4 ("KVM: x86: nSVM: implement nested TSC scaling")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230729011608.1065019-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since commit e76ecaeef6 ("cgroup: use cgroup_kn_lock_live() in other
cgroup kernfs methods"), cgroup_kn_lock_live() is used in cgroup kernfs
methods. Update corresponding comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
the addition of a MUDULE_DEVICE_TABLE for the samsung-s6d7aa0 panel.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZMtQ6gAKCRDj7w1vZxhR
xS4wAQDtnJ+ONz3yYKREZzUHytcrG6Rwm8s0Vuty8V7XNC6DPwD/b3NnoASmrLQ2
IUr9MQEfIvOTe5CH3vHsmet481gxsAo=
=3rfS
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-08-03' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
A NULL pointer dereference fix for TTM, a timings fix for imx/ipuv3 and
the addition of a MODULE_DEVICE_TABLE for the samsung-s6d7aa0 panel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ztfogof2dhtlvjwe73mvd2jp5kbldhkkav7k5culuseqblwpti@qfobohwx3c3j
- Fix segfault in the powerpc specific arch_skip_callchain_idx function.
The patch doing the reference count init/exit that went into 6.5 missed
this function.
- Fix regression reading the arm64 PMU cpu slots in sysfs, a patch removing
some code duplication ended up duplicating the /sysfs prefix for these files.
- Fix grouping of events related to topdown, addressing a regression on the CSV
output produced by 'perf stat' noticed on the downstream tool toplev.
- Fix the uprobe_from_different_cu 'perf test' entry, it is failing when
gcc isn't available, so we need to check that and skip the test if it
is not installed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZMwehwAKCRCyPKLppCJ+
J6Q4AP9x8xOcwWnaeNlB6U1rQjcEojlRlwdPbKH3yp9oha+wfwD/biswcV1LclmX
zF7FLZRHLpkDAfmzhMwu73Qu6dbQqw0=
=U5VE
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.5-2-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix segfault in the powerpc specific arch_skip_callchain_idx
function. The patch doing the reference count init/exit that went
into 6.5 missed this function.
- Fix regression reading the arm64 PMU cpu slots in sysfs, a patch
removing some code duplication ended up duplicating the /sysfs prefix
for these files.
- Fix grouping of events related to topdown, addressing a regression on
the CSV output produced by 'perf stat' noticed on the downstream tool
toplev.
- Fix the uprobe_from_different_cu 'perf test' entry, it is failing
when gcc isn't available, so we need to check that and skip the test
if it is not installed.
* tag 'perf-tools-fixes-for-v6.5-2-2023-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf test parse-events: Test complex name has required event format
perf pmus: Create placholder regardless of scanning core_only
perf test uprobe_from_different_cu: Skip if there is no gcc
perf parse-events: Only move force grouped evsels when sorting
perf parse-events: When fixing group leaders always set the leader
perf parse-events: Extra care around force grouped events
perf callchain powerpc: Fix addr location init during arch_skip_callchain_idx function
perf pmu arm64: Fix reading the PMU cpu slots in sysfs
- Fixup the Sanitixe device ABI that was merged for v6.5 to hide some
sysfs files when the necessary support is missing. Update the ABI
documentation around this as well.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCZMvhjwAKCRAPzq5USduL
dnifAQC9cl8R0bHhphAMstXUb9/GNh2Vxojr+MJkQweKRtc33gEAhjVVCyZ1mEHh
cWjVhtCwIYp/k3h8smBZ2VmK0wXc0wA=
=kAni
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Vishal Verma:
- Fixup the Sanitixe device ABI that was merged for v6.5 to hide some
sysfs files when the necessary support is missing. Update the ABI
documentation around this as well.
* tag 'cxl-fixes-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/memdev: Only show sanitize sysfs files when supported
cxl/memdev: Document security state in kern-doc
cxl/memdev: Improve sanitize ABI descriptions
Latest Intel platform GraniteRapids-D introduces AMX-COMPLEX, which adds
two instructions to perform matrix multiplication of two tiles containing
complex elements and accumulate the results into a packed single precision
tile.
AMX-COMPLEX is enumerated via CPUID.(EAX=7,ECX=1):EDX[bit 8]
Advertise AMX_COMPLEX if it's supported in hardware. There are no VMX
controls for the feature, i.e. the instructions can't be interecepted, and
KVM advertises base AMX in CPUID if AMX is supported in hardware, even if
KVM doesn't advertise AMX as being supported in XCR0, e.g. because the
process didn't opt-in to allocating tile data.
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20230802022954.193843-1-tao1.su@linux.intel.com
[sean: tweak last paragraph of changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Bail from vmx_emergency_disable() without processing the list of loaded
VMCSes if CR4.VMXE=0, i.e. if the CPU can't be post-VMXON. It should be
impossible for the list to have entries if VMX is already disabled, and
even if that invariant doesn't hold, VMCLEAR will #UD anyways, i.e.
processing the list is pointless even if it somehow isn't empty.
Assuming no existing KVM bugs, this should be a glorified nop. The
primary motivation for the change is to avoid having code that looks like
it does VMCLEAR, but then skips VMXON, which is nonsensical.
Suggested-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_rebooting is guaranteed to be true prior to disabling SVM
in an emergency, use the existing stgi() helper instead of open coding
STGI. In effect, eat faults on STGI if and only if kvm_rebooting==true.
Link: https://lore.kernel.org/r/20230721201859.2307736-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set kvm_rebooting when virtualization is disabled in an emergency so that
KVM eats faults on virtualization instructions even if kvm_reboot() isn't
reached.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move cpu_svm_disable() into KVM proper now that all hardware
virtualization management is routed through KVM. Remove the now-empty
virtext.h.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable migration when probing VMX support during module load to ensure
the CPU is stable, mostly to match similar SVM logic, where allowing
migration effective requires deliberately writing buggy code. As a bonus,
KVM won't report the wrong CPU to userspace if VMX is unsupported, but in
practice that is a very, very minor bonus as the only way that reporting
the wrong CPU would actually matter is if hardware is broken or if the
system is misconfigured, i.e. if KVM gets migrated from a CPU that _does_
support VMX to a CPU that does _not_ support VMX.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Check "this" CPU instead of the boot CPU when querying SVM support so that
the per-CPU checks done during hardware enabling actually function as
intended, i.e. will detect issues where SVM isn't support on all CPUs.
Disable migration for the use from svm_init() mostly so that the standard
accessors for the per-CPU data can be used without getting yelled at by
CONFIG_DEBUG_PREEMPT=y sanity checks. Preventing the "disabled by BIOS"
error message from reporting the wrong CPU is largely a bonus, as ensuring
a stable CPU during module load is a non-goal for KVM.
Link: https://lore.kernel.org/all/ZAdxNgv0M6P63odE@google.com
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fold the guts of cpu_has_svm() into kvm_is_svm_supported(), its sole
remaining user.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the explicit check on the extended CPUID level in cpu_has_svm(), the
kernel's cached CPUID info will leave the entire SVM leaf unset if said
leaf is not supported by hardware. Prior to using cached information,
the check was needed to avoid false positives due to Intel's rather crazy
CPUID behavior of returning the values of the maximum supported leaf if
the specified leaf is unsupported.
Fixes: 682a810887 ("x86/kvm/svm: Simplify cpu_has_svm()")
Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make building KVM SVM support depend on support for AMD or Hygon. KVM
already effectively restricts SVM support to AMD and Hygon by virtue of
the vendor string checks in cpu_has_svm(), and KVM VMX supports depends
on one of its three known vendors (Intel, Centaur, or Zhaoxin).
Add the CPU_SUP_HYGON clause even though CPU_SUP_HYGON selects CPU_SUP_AMD
to document that KVM SVM support isn't just for AMD CPUs, and to prevent
breakage should Hygon support ever become a standalone thing.
Link: https://lore.kernel.org/r/20230721201859.2307736-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that VMX is disabled in emergencies via the virt callbacks, move the
VMXOFF helpers into KVM, the only remaining user.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fold the raw CPUID check for VMX into kvm_is_vmx_supported(), its sole
user. Keep the check even though KVM also checks X86_FEATURE_VMX, as the
intent is to provide a unique error message if VMX is unsupported by
hardware, whereas X86_FEATURE_VMX may be clear due to firmware and/or
kernel actions.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Expose the crash/reboot hooks used by KVM to disable virtualization in
hardware and unblock INIT only if there's a potential in-tree user,
i.e. either KVM_INTEL or KVM_AMD is enabled.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Attempt to disable virtualization during an emergency reboot if and only
if there is a registered virt callback, i.e. iff a hypervisor (KVM) is
active. If there's no active hypervisor, then the CPU can't be operating
with VMX or SVM enabled (barring an egregious bug).
Checking for a valid callback instead of simply for SVM or VMX support
can also eliminates spurious NMIs by avoiding the unecessary call to
nmi_shootdown_cpus_on_restart().
Note, IRQs are disabled, which prevents KVM from coming along and
enabling virtualization after the fact.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the various "disable virtualization" helpers above the emergency
reboot path so that emergency_reboot_disable_virtualization() can be
stubbed out in a future patch if neither KVM_INTEL nor KVM_AMD is enabled,
i.e. if there is no in-tree user of CPU virtualization.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
