Assert that IRQs are disabled when turning off virtualization in an
emergency. KVM enables hardware via on_each_cpu(), i.e. could re-enable
hardware if a pending IPI were delivered after disabling virtualization.
Remove a misleading comment from emergency_reboot_disable_virtualization()
about "just" needing to guarantee the CPU is stable (see above).
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the virt callback to disable SVM (and set GIF=1) during an emergency
instead of blindly attempting to disable SVM. Like the VMX case, if a
hypervisor, i.e. KVM, isn't loaded/active, SVM can't be in use.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use KVM VMX's reboot/crash callback to do VMXOFF in an emergency instead
of manually and blindly doing VMXOFF. There's no need to attempt VMXOFF
if a hypervisor, i.e. KVM, isn't loaded/active, i.e. if the CPU can't
possibly be post-VMXON.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Provide dedicated helpers to (un)register virt hooks used during an
emergency crash/reboot, and WARN if there is an attempt to overwrite
the registered callback, or an attempt to do an unpaired unregister.
Opportunsitically use rcu_assign_pointer() instead of RCU_INIT_POINTER(),
mainly so that the set/unset paths are more symmetrical, but also because
any performance gains from using RCU_INIT_POINTER() are meaningless for
this code.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
VMCLEAR active VMCSes before any emergency reboot, not just if the kernel
may kexec into a new kernel after a crash. Per Intel's SDM, the VMX
architecture doesn't require the CPU to flush the VMCS cache on INIT. If
an emergency reboot doesn't RESET CPUs, cached VMCSes could theoretically
be kept and only be written back to memory after the new kernel is booted,
i.e. could effectively corrupt memory after reboot.
Opportunistically remove the setting of the global pointer to NULL to make
checkpatch happy.
Cc: Andrew Cooper <Andrew.Cooper3@citrix.com>
Link: https://lore.kernel.org/r/20230721201859.2307736-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRdM/uy1Ege0+EN1fNar9k/UBDW4wUCZMvevwAKCRBar9k/UBDW
42Z0AP90hLZ9OmoghYAlALHLl8zqXuHCV8OeFXR5auqG+kkcCwEAx6h99vnh4zgP
Tngj6Yid60o39/IZXXblhV37HfSiyQ8=
=/kVE
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2023-08-03
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).
The main changes are:
1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
Daniel Borkmann
2) Support new insns from cpu v4 from Yonghong Song
3) Non-atomically allocate freelist during prefill from YiFei Zhu
4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu
5) Add tracepoint to xdp attaching failure from Leon Hwang
6) struct netdev_rx_queue and xdp.h reshuffling to reduce
rebuild time from Jakub Kicinski
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
net: invert the netdevice.h vs xdp.h dependency
net: move struct netdev_rx_queue out of netdevice.h
eth: add missing xdp.h includes in drivers
selftests/bpf: Add testcase for xdp attaching failure tracepoint
bpf, xdp: Add tracepoint to xdp attaching failure
selftests/bpf: fix static assert compilation issue for test_cls_*.c
bpf: fix bpf_probe_read_kernel prototype mismatch
riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
libbpf: fix typos in Makefile
tracing: bpf: use struct trace_entry in struct syscall_tp_t
bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
netfilter: bpf: Only define get_proto_defrag_hook() if necessary
bpf: Fix an array-index-out-of-bounds issue in disasm.c
net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
docs/bpf: Fix malformed documentation
bpf: selftests: Add defrag selftests
bpf: selftests: Support custom type and proto for client sockets
bpf: selftests: Support not connecting client socket
netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
...
====================
Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing scary here. Feels like the first wave of regressions
from v6.5 is addressed - one outstanding fix still to come
in TLS for the sendpage rework.
Current release - regressions:
- udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
- dsa: fix older DSA drivers using phylink
Previous releases - regressions:
- gro: fix misuse of CB in udp socket lookup
- mlx5: unregister devlink params in case interface is down
- Revert "wifi: ath11k: Enable threaded NAPI"
Previous releases - always broken:
- sched: cls_u32: fix match key mis-addressing
- sched: bind logic fixes for cls_fw, cls_u32 and cls_route
- add bound checks to a number of places which hand-parse netlink
- bpf: disable preemption in perf_event_output helpers code
- qed: fix scheduling in a tasklet while getting stats
- avoid using APIs which are not hardirq-safe in couple of drivers,
when we may be in a hard IRQ (netconsole)
- wifi: cfg80211: fix return value in scan logic, avoid page
allocator warning
- wifi: mt76: mt7615: do not advertise 5 GHz on first PHY
of MT7615D (DBDC)
Misc:
- drop handful of inactive maintainers, put some new in place
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HYkl
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and wireless.
Nothing scary here. Feels like the first wave of regressions from v6.5
is addressed - one outstanding fix still to come in TLS for the
sendpage rework.
Current release - regressions:
- udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
- dsa: fix older DSA drivers using phylink
Previous releases - regressions:
- gro: fix misuse of CB in udp socket lookup
- mlx5: unregister devlink params in case interface is down
- Revert "wifi: ath11k: Enable threaded NAPI"
Previous releases - always broken:
- sched: cls_u32: fix match key mis-addressing
- sched: bind logic fixes for cls_fw, cls_u32 and cls_route
- add bound checks to a number of places which hand-parse netlink
- bpf: disable preemption in perf_event_output helpers code
- qed: fix scheduling in a tasklet while getting stats
- avoid using APIs which are not hardirq-safe in couple of drivers,
when we may be in a hard IRQ (netconsole)
- wifi: cfg80211: fix return value in scan logic, avoid page
allocator warning
- wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D
(DBDC)
Misc:
- drop handful of inactive maintainers, put some new in place"
* tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits)
MAINTAINERS: update TUN/TAP maintainers
test/vsock: remove vsock_perf executable on `make clean`
tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen
tcp_metrics: annotate data-races around tm->tcpm_net
tcp_metrics: annotate data-races around tm->tcpm_vals[]
tcp_metrics: annotate data-races around tm->tcpm_lock
tcp_metrics: annotate data-races around tm->tcpm_stamp
tcp_metrics: fix addr_same() helper
prestera: fix fallback to previous version on same major version
udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
net/mlx5e: Set proper IPsec source port in L4 selector
net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio
net/mlx5: fs_core: Make find_closest_ft more generic
wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
vxlan: Fix nexthop hash size
ip6mr: Fix skb_under_panic in ip6mr_cache_report()
s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
net: tap_open(): set sk_uid from current_fsuid()
net: tun_chr_open(): set sk_uid from current_fsuid()
net: dcb: choose correct policy to parse DCB_ATTR_BCN
...
Today module_frob_arch_sections() spots init sections from their
'init' prefix, and uses this to keep the init PLTs separate from the rest.
get_module_plt() uses within_module_init() to determine if a
location is in the init text or not, but this depends on whether
core code thought this was an init section.
Naturally the logic is different.
module_init_layout_section() groups the init and exit text together if
module unloading is disabled, as the exit code will never run. The result
is kernels with this configuration can't load all their modules because
there are not enough PLTs for the combined init+exit section.
A previous patch exposed module_init_layout_section(), use that so the
logic is the same.
Fixes: 055f23b74b ("module: check for exit sections in layout_sections() instead of module_init_section()")
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Today module_frob_arch_sections() spots init sections from their
'init' prefix, and uses this to keep the init PLTs separate from the rest.
module_emit_plt_entry() uses within_module_init() to determine if a
location is in the init text or not, but this depends on whether
core code thought this was an init section.
Naturally the logic is different.
module_init_layout_section() groups the init and exit text together if
module unloading is disabled, as the exit code will never run. The result
is kernels with this configuration can't load all their modules because
there are not enough PLTs for the combined init+exit section.
This results in the following:
| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
| module_emit_plt_entry+0x184/0x1cc
| apply_relocate_add+0x2bc/0x8e4
| load_module+0xe34/0x1bd4
| init_module_from_file+0x84/0xc0
| __arm64_sys_finit_module+0x1b8/0x27c
| invoke_syscall.constprop.0+0x5c/0x104
| do_el0_svc+0x58/0x160
| el0_svc+0x38/0x110
| el0t_64_sync_handler+0xc0/0xc4
| el0t_64_sync+0x190/0x194
A previous patch exposed module_init_layout_section(), use that so the
logic is the same.
Reported-by: Adam Johnston <adam.johnston@arm.com>
Tested-by: Adam Johnston <adam.johnston@arm.com>
Fixes: 055f23b74b ("module: check for exit sections in layout_sections() instead of module_init_section()")
Cc: <stable@vger.kernel.org> # 5.15.x: 60a0aab746 arm64: module-plts: inline linux/moduleloader.h
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
module_init_layout_section() choses whether the core module loader
considers a section as init or not. This affects the placement of the
exit section when module unloading is disabled. This code will never run,
so it can be free()d once the module has been initialised.
arm and arm64 need to count the number of PLTs they need before applying
relocations based on the section name. The init PLTs are stored separately
so they can be free()d. arm and arm64 both use within_module_init() to
decide which list of PLTs to use when applying the relocation.
Because within_module_init()'s behaviour changes when module unloading
is disabled, both architecture would need to take this into account when
counting the PLTs.
Today neither architecture does this, meaning when module unloading is
disabled there are insufficient PLTs in the init section to load some
modules, resulting in warnings:
| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
| module_emit_plt_entry+0x184/0x1cc
| apply_relocate_add+0x2bc/0x8e4
| load_module+0xe34/0x1bd4
| init_module_from_file+0x84/0xc0
| __arm64_sys_finit_module+0x1b8/0x27c
| invoke_syscall.constprop.0+0x5c/0x104
| do_el0_svc+0x58/0x160
| el0_svc+0x38/0x110
| el0t_64_sync_handler+0xc0/0xc4
| el0t_64_sync+0x190/0x194
Instead of duplicating module_init_layout_section()s logic, expose it.
Reported-by: Adam Johnston <adam.johnston@arm.com>
Fixes: 055f23b74b ("module: check for exit sections in layout_sections() instead of module_init_section()")
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Because the utilized field in struct teo_cpu is only used locally in
teo_select(), replace it with a local variable in that function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-and-tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
When teo_select() is going to return early in some special cases, make
it avoid stopping the tick if the idle state to be returned is shallow.
In particular, never stop the tick if state 0 is to be returned.
Link: https://lore.kernel.org/linux-pm/CAJZ5v0jJxHj65r2HXBTd3wfbZtsg=_StzwO1kA5STDnaPe_dWA@mail.gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-and-tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
The TEO governor takes CPU utilization into account by refining idle state
selection when the utilization is above a certain threshold. This is done by
choosing an idle state shallower than the previously selected one.
However, when doing this, the idle duration estimate needs to be
adjusted so as to prevent the scheduler tick from being stopped when the
candidate idle state is shallow, which may lead to excessive energy
usage if the CPU is not woken up quickly enough going forward.
Moreover, if the scheduler tick has been stopped already and the new
idle duration estimate is too small, the replacement candidate state
cannot be used.
Modify the relevant code to take the above observations into account.
Fixes: 9ce0f7c4bc ("cpuidle: teo: Introduce util-awareness")
Link: https://lore.kernel.org/linux-pm/CAJZ5v0jJxHj65r2HXBTd3wfbZtsg=_StzwO1kA5STDnaPe_dWA@mail.gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-and-tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
The 'e' key is to toggle expand/collapse the selected entry only. But
the current code has a bug that it only increases the number of entries
by 1 in the hierarchy mode so users cannot move under the current entry
after the key stroke. This is due to a wrong assumption in the
hist_entry__set_folding().
The commit b33f922651 ("perf hists browser: Put hist_entry folding
logic into single function") factored out the code, but actually it
should be handled separately. The hist_browser__set_folding() is to
update fold state for each entry so it needs to traverse all (child)
entries regardless of the current fold state. So it increases the
number of entries by 1.
But the hist_entry__set_folding() only cares the currently selected
entry and its all children. So it should count all unfolded child
entries. This code is implemented in hist_browser__toggle_fold()
already so we can just call it.
Fixes: b33f922651 ("perf hists browser: Put hist_entry folding logic into single function")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230731094934.1616495-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit ef9ff6017e ("perf ui browser: Move the extra title
lines from the hists browser") introduced ui_browser__gotorc_title() to
help moving non-title lines easily. But it missed to update the title
for the hierarchy mode so it won't print the header line on TUI at all.
$ perf report --hierarchy
Fixes: ef9ff6017e ("perf ui browser: Move the extra title lines from the hists browser")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230731094934.1616495-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 616b14b47a ("perf build: Conditionally define NDEBUG") we
started using NDEBUG=1 when DEBUG=1 isn't present, so code that is
enclosed with assert() is not called.
In dd317df072 ("perf build: Make binutil libraries opt in") we
stopped linking against binutils-devel, for licensing reasons.
Recently people asked me why annotation of BPF programs wasn't working,
i.e. this:
$ perf annotate bpf_prog_5280546344e3f45c_kfree_skb
was returning:
case SYMBOL_ANNOTATE_ERRNO__NO_LIBOPCODES_FOR_BPF:
scnprintf(buf, buflen, "Please link with binutils's libopcode to enable BPF annotation");
This was on a fedora rpm, so its new enough that I had to try to test by
rebuilding using BUILD_NONDISTRO=1, only to get it segfaulting on me.
This combination made this libopcode function not to be called:
assert(bfd_check_format(bfdf, bfd_object));
Changing it to:
if (!bfd_check_format(bfdf, bfd_object))
abort();
Made it work, looking at this "check" function made me realize it
changes the 'bfdf' internal state, i.e. we better call it.
So stop using assert() on it, just call it and abort if it fails.
Probably it is better to propagate the error, etc, but it seems it is
unlikely to fail from the usage done so far and we really need to stop
using libopcodes, so do the quick fix above and move on.
With it we have BPF annotation back working when built with
BUILD_NONDISTRO=1:
⬢[acme@toolbox perf-tools-next]$ perf annotate --stdio2 bpf_prog_5280546344e3f45c_kfree_skb | head
No kallsyms or vmlinux with build-id 939bc71a1a51cdc434e60af93c7e734f7d5c0e7e was found
Samples: 12 of event 'cpu-clock:ppp', 4000 Hz, Event count (approx.): 3000000, [percent: local period]
bpf_prog_5280546344e3f45c_kfree_skb() bpf_prog_5280546344e3f45c_kfree_skb
Percent int kfree_skb(struct trace_event_raw_kfree_skb *args) {
nop
33.33 xchg %ax,%ax
push %rbp
mov %rsp,%rbp
sub $0x180,%rsp
push %rbx
push %r13
⬢[acme@toolbox perf-tools-next]$
Fixes: 6987561c9e ("perf annotate: Enable annotation of BPF programs")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mohamed Mahmoud <mmahmoud@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/lkml/ZMrMzoQBe0yqMek1@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf build suports llvm and clang support compiled in.
Test case 56 builtin clang support provides a test case
which is always skipped.
Link perf with the latest llvm and clang libraries and
enable this test case.
Use 'make LIBCLANGLLVM=1' to include this support.
V2: Add Library patch before -lclang-cpp
Output before:
# ./perf test 56
56: builtin clang support :
56.1: builtin clang compile C source to IR : Skip (not compiled in)
56.2: builtin clang compile C source to ELF object: Skip (not compiled in)
Output after:
# ./perf test 56
56: builtin clang support :
56.1: builtin clang compile C source to IR : Ok
56.2: builtin clang compile C source to ELF object : Ok
#
From Ian Rogers:
Build tested with LLVM 14 and 15 using:
BUILD_BPF_SKEL=1 LIBCLANGLLVM=1 LLVM_CONFIG=llvm-config-14
BUILD_BPF_SKEL=1 LIBCLANGLLVM=1 LLVM_CONFIG=llvm-config-15
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lore.kernel.org/r/20230725150347.3479291-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf build auto-detects features and packages already installed for its
build. This is done in directory tools/build/feature. This directory
contains small sample programs. When they successfully compile the
necessary prereqs in form of libraries and header files are present.
Such a check is also done for llvm and clang. And the checks fail.
Fix this and update to the latest C++ standard and use the new library
provided by clang (which contains new packaging) s/ee this link for
reference:
https://fedoraproject.org/wiki/Changes/Stop-Shipping-Individual-Component-Libraries-In-clang-lib-Package
Output before:
# rm -f ./test-clang.bin; make test-clang.bin; ./test-clang.bin; \
ll test-clang.make.output
g++ -MD -Wall -Werror -o test-clang.bin test-clang.cpp \
> test-clang.make.output 2>&1 -std=gnu++14 \
-I/usr/include \
-L/usr/lib64 \
-Wl,--start-group -lclangBasic -lclangDriver \
-lclangFrontend -lclangEdit -lclangLex \
-lclangAST -Wl,--end-group \
-lLLVM-16 \
\
> test-clang.make.output 2>&1
make: *** [Makefile:356: test-clang.bin] Error 1
-bash: ./test-clang.bin: No such file or directory
-rw-r--r--. 1 root root 252041 Jul 12 09:56 test-clang.make.output
#
File test-clang.make.output contains many lines of unreferenced
symbols.
Output after:
# rm -f ./test-clang.bin; make test-clang.bin; ./test-clang.bin; \
cat test-clang.make.output
g++ -MD -Wall -Werror -o test-clang.bin test-clang.cpp \
> test-clang.make.output 2>&1 -std=gnu++17 \
-I/usr/include \
-L/usr/lib64 \
-Wl,--start-group -lclang-cpp -Wl,--end-group \
-lLLVM-16 \
\
> test-clang.make.output 2>&1
#
Committer notes:
Test it in the tools/build/feature directory, and have clang-devel and
llvm-devel installed.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lore.kernel.org/r/20230725150347.3479291-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With -Werror the build was failing on fedora rawhide:
[perfbuilder@27cfe44d67ed perf-6.5.0-rc2]$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/13/lto-wrapper
OFFLOAD_TARGET_NAMES=nvptx-none
OFFLOAD_TARGET_DEFAULT=1
Target: x86_64-redhat-linux
Configured with: ../configure --enable-bootstrap --enable-languages=c,c++,fortran,objc,obj-c++,ada,go,d,m2,lto --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-shared --enable-threads=posix --enable-checking=release --enable-multilib --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-gcc-major-version-only --enable-libstdcxx-backtrace --with-libstdcxx-zoneinfo=/usr/share/zoneinfo --with-linker-hash-style=gnu --enable-plugin --enable-initfini-array --with-isl=/builddir/build/BUILD/gcc-13.2.1-20230728/obj-x86_64-redhat-linux/isl-install --enable-offload-targets=nvptx-none --without-cuda-driver --enable-offload-defaulted --enable-gnu-indirect-function --enable-cet --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux --with-build-config=bootstrap-lto --enable-link-serialization=1
Thread model: posix
Supported LTO compression algorithms: zlib zstd
gcc version 13.2.1 20230728 (Red Hat 13.2.1-1) (GCC)
[perfbuilder@27cfe44d67ed perf-6.5.0-rc2]$
In file included from /usr/include/python3.12/Python.h:44,
from scripts/python/Perf-Trace-Util/Context.c:14:
/usr/include/python3.12/object.h: In function 'Py_SIZE':
/usr/include/python3.12/object.h:217:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
217 | PyVarObject *var_ob = _PyVarObject_CAST(ob);
| ^~~~~~~~~~~
In file included from /usr/include/python3.12/Python.h:53:
/usr/include/python3.12/cpython/longintrepr.h: In function '_PyLong_CompactValue':
/usr/include/python3.12/cpython/longintrepr.h:121:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
121 | Py_ssize_t sign = 1 - (op->long_value.lv_tag & _PyLong_SIGN_MASK);
| ^~~~~~~~~~
<SNIP>
In file included from /usr/include/python3.12/Python.h:44,
from util/scripting-engines/trace-event-python.c:22:
/usr/include/python3.12/object.h: In function 'Py_SIZE':
/usr/include/python3.12/object.h:217:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
217 | PyVarObject *var_ob = _PyVarObject_CAST(ob);
| ^~~~~~~~~~~
CC /tmp/build/perf/util/units.o
CC /tmp/build/perf/util/time-utils.o
In file included from /usr/include/python3.12/Python.h:53:
/usr/include/python3.12/cpython/longintrepr.h: In function '_PyLong_CompactValue':
/usr/include/python3.12/cpython/longintrepr.h:121:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
121 | Py_ssize_t sign = 1 - (op->long_value.lv_tag & _PyLong_SIGN_MASK);
| ^~~~~~~~~~
So add -Wno-declaration-after-statement to the python scripting CFLAGS.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZMpdKeO8gU%2FcWDqH@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid grouping events especially in cases where the kernel's PMU
driver fails to not open the events, causing the events to report back
as "<not counted>".
This update comes from:
https://github.com/intel/perfmon/pull/94
Fixes issues reported with patch:
https://lore.kernel.org/lkml/20230719001836.198363-3-irogers@google.com/
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230801053634.1142634-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
1.15 events were released in:
76dfb81a11
Adds the events OCR.DEMAND_DATA_RD.LOCAL_SOCKET_PMM and
OCR.DEMAND_DATA_RD.PMM.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230801053634.1142634-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As topdown.slots may appear as slots it may get confused with
uops_retired.slots which is an invalid perf metric event group leader.
Special case uops_retired.slots to avoid this confusion.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230801053634.1142634-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since @symbol variable access is not supported by uprobe event, it must be
correctly warn user instead of kernel version update.
Committer testing:
With/without the patch:
[root@quaco ~]# perf probe -x ~/bin/perf -L sigtrap_handler
<sigtrap_handler@/home/acme/git/perf-tools-next/tools/perf/tests/sigtrap.c:0>
0 sigtrap_handler(int signum __maybe_unused, siginfo_t *info, void *ucontext __maybe_unused)
1 {
2 if (!__atomic_fetch_add(&ctx.signal_count, 1, __ATOMIC_RELAXED))
3 ctx.first_siginfo = *info;
4 __atomic_fetch_sub(&ctx.tids_want_signal, syscall(SYS_gettid), __ATOMIC_RELAXED);
5 }
static void *test_thread(void *arg)
{
[root@quaco ~]# perf probe -x ~/bin/perf sigtrap_handler:4 "ctx.signal_count"
Without the patch:
[root@quaco ~]# perf probe -x ~/bin/perf sigtrap_handler:4 "ctx.signal_count"
Failed to write event: Invalid argument
Please upgrade your kernel to at least 3.14 to have access to feature @ctx
Error: Failed to add events.
[root@quaco ~]#
With the patch:
[root@quaco ~]#
Failed to write event: Invalid argument
@ctx accesses a variable by symbol name, but that is not supported for user application probe.
Error: Failed to add events.
[root@quaco ~]#
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Closes: https://lore.kernel.org/all/ZLWDEjvFjrrEJODp@kernel.org/
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/169055397023.67089.12693645664676964310.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_std_output testcase throws
below warning:
In tests/shell/stat+std_output.sh line 9:
. $(dirname $0)/lib/stat_output.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/stat+std_output.sh line 32:
local -i cnt=0
^-^ SC2034 (warning): cnt appears unused. Verify use (or export if used externally).
Fixed the warning by adding quotes to avoid word splitting
and removed unused variable "cnt" at line 32.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-27-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_output.sh throws below warning:
In tests/shell/lib/stat_output.sh line 1:
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fixed the warning by adding shell directive.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-25-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on syscalltbl.sh generates below warning:
In ./tools/perf/arch/x86/entry/syscalls/syscalltbl.sh line 27:
while read nr abi name entry compat; do
^-^ SC2034 (warning): abi appears unused. Verify use (or export if used externally).
^----^ SC2034 (warning): compat appears unused. Verify use (or export if used externally).
These variables are intentionally unused since they are needed to parse
through the output. Use "_" as a prefix for these throw away variables.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-22-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on x86_arch_prctl.sh generates below warning:
In ./tools/perf/trace/beauty/x86_arch_prctl.sh line 10:
local idx=$1
^-------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In ./tools/perf/trace/beauty/x86_arch_prctl.sh line 11:
local prefix=$2
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In ./tools/perf/trace/beauty/x86_arch_prctl.sh line 12:
local first_entry=$3
^---------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fix this by removing local since these are variables used only in
specific function
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-21-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck in "lib/waiting.sh" generates below
warning:
In ./tools/perf/tests/shell/lib/waiting.sh line 1:
# SPDX-License-Identifier: GPL-2.0
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fix this by adding shebang in the beginning of the script.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-20-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on probe_vfs_getname fails with below
warning:
In ./tools/perf/tests/shell/lib/probe_vfs_getname.sh line 1:
# Arnaldo Carvalho de Melo <acme@kernel.org>, 2017
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
In ./tools/perf/tests/shell/lib/probe_vfs_getname.sh line 14:
local verbose=$1
^-----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fix this:
- by adding shebang in the beginning of the file and
- rename variable verbose to "add_probe_verbose" after removing
local
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-19-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the shellcheck warnings for thread_loop_check_tid_10.sh
In ./tools/perf/tests/shell/coresight/thread_loop_check_tid_10.sh line 8:
. $(dirname $0)/../lib/coresight.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Add quotes to prevent word splitting which are caused by
unquoted command expansions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-17-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on check-headers.sh generates below warning:
In check-headers.sh line 126:
check_2 "tools/$file" "$file" $*
^-- SC2048 (warning): Use "$@" (with quotes) to prevent whitespace problems.
In check-headers.sh line 134:
check_2 "tools/perf/trace/beauty/$file" "$file" $*
^-- SC2048 (warning): Use "$@" (with quotes) to prevent whitespace problems.
In check-headers.sh line 186:
cd tools/perf
^-----------^ SC2164 (warning): Use 'cd ... || exit' or 'cd ... || return' in case cd fails.
Fixed the warnings by:
- Using "$@" instead of $*
- Adding exit condition with cd command
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-16-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on arch_errno_names.sh generates below warning:
In arch_errno_names.sh line 20:
local arch="$1"
^--------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
......
In arch_errno_names.sh line 61:
local arch
^--------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In arch_errno_names.sh line 67:
printf '\t\treturn errno_to_name__%s(err);\n' $(arch_string "$arch")
^--------------------^ SC2046 (warning): Quote this to prevent word splitting.
In arch_errno_names.sh line 69:
printf '\treturn errno_to_name__%s(err);\n' $(arch_string "$default")
^-----------------------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warnings by:
- Fixing shellcheck warnings for local usage, by removing
local from the variable names
- Adding quotes to avoid word splitting
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-15-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on probe.sh throws below warning:
In lib/probe.sh line 1:
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fixed the warnings by adding shell directive.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-14-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat+shadow_stat.sh generates below warning:
In tests/shell/stat+shadow_stat.sh line 48:
while read cpu num evt hash ipc rest
^--^ SC2034 (warning): hash appears unused. Verify use (or export if used externally).
This variable is intentionally unused since it is needed to parse
through the output. Use "_" as a prefix for this throw away variable.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-11-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_bpf_counter.sh generates below
warning:
In tests/shell/stat_bpf_counters.sh line 34:
if [ "$base_cycles" == "<not" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
In tests/shell/stat_bpf_counters.sh line 39:
if [ "$bpf_cycles" == "<not" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
Fix this by using "=" instead of "==" to work for
all shells.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-10-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on test_perf_data_converter_json.sh throws
below warning:
In tests/shell/test_perf_data_converter_json.sh line 42:
if [ $(cat "${result}" | wc -l) -gt "0" ] ; then
^------------------------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning test_perf_data_converter_json.sh
#
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-9-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat+csv_summary.sh throws below warnings:
In tests/shell/stat+csv_summary.sh line 26:
while read num event run pct
^-^ SC2034 (warning): num appears unused. Verify use (or export if used externally).
^---^ SC2034 (warning): event appears unused. Verify use (or export if used externally).
^-^ SC2034 (warning): run appears unused. Verify use (or export if used externally).
^-^ SC2034 (warning): pct appears unused. Verify use (or export if used externally).
These variables are intentionally unused since they are needed to parse
through the output. Use "_" as a prefix for these throw away variables.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-8-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on test_arm_spe_fork.sh throws below warnings:
In tests/shell/test_arm_spe_fork.sh line 25:
trap cleanup_files exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
Fixed this issue by using uppercase for "EXIT", "TERM" and
"INIT" signals to avoid using lower/mixed case for signal
names as input.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-7-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on lock_contention.sh generates below warning:
In stat_bpf_counters_cgrp.sh line 28:
if [ -d /sys/fs/cgroup/system.slice -a -d /sys/fs/cgroup/user.slice ]; then
^-- SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
In stat_bpf_counters_cgrp.sh line 34:
local self_cgrp=$(grep perf_event /proc/self/cgroup | cut -d: -f3)
^-------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^-------^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
In stat_bpf_counters_cgrp.sh line 51:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In stat_bpf_counters_cgrp.sh line 65:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fixed above warnings by:
- Changing the expression [p -a q] to [p] && [q].
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-6-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on lock_contention.sh generates below warning:
In tests/shell/lock_contention.sh line 24:
if [ `id -u` != 0 ]; then
^-----^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/lock_contention.sh line 160:
local type=$(head -1 "${result}" | awk '{ print $8 }' | sed -e 's/:.*//')
^--------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^--^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
Fixed above warnings by:
- Adding quotes to avoid word splitting.
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-5-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
