When seq_show_option_n() is used, it is for non-string memory that
happens to be printable bytes. As such, we must use memcpy() to copy the
bytes and then explicitly NUL-terminate the result.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230726215957.never.619-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The commit 45b58669e5 ("drm/ssd130x: Allocate buffer in the plane's
.atomic_check() callback") moved the buffers allocation to be done in
the primary plane's .atomic_check() callback.
But it missed that since the driver uses a shadow-buffered plane, the
__drm_gem_{reset,duplicate,destroy}_shadow_plane() helper functions
must be used in the struct drm_plane_funcs handlers.
This was missed because the mentioned commit did not remove the macro
DRM_GEM_SHADOW_PLANE_FUNCS, which leads to the custom plane's atomic
state management handlers to not be used.
Fixes: 45b58669e5 ("drm/ssd130x: Allocate buffer in the plane's .atomic_check() callback")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/dri-devel/20230727122412.2464210-1-arnd@kernel.org
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727140453.577445-1-javierm@redhat.com
When exercising various dev interfaces with stress-ng the mtdblock drivers
can be (ab)used to generate a lot of warning messages. Make these rate
limited to reduce the kernel log from being spammed with the same messages.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230719103354.2829366-1-colin.i.king@gmail.com
panel-lvds alone is not a valid compatible string and we always need a
specific compatible string as well. Nexus 7 can come with one of (at
least) two panels, so pick one of them as the specific compatible
string.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The LVDS bindings require a specific compatible string in addition to
the generic "panel-lvds". Add the HannStar HSD101PWW2 which is used on
a similar device (ASUS TF201) and seems to work fine with slightly
modified timings in DT.
Suggested-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of duplicating the I2C3 node and adding NVEC specific
properties, reuse the I2C3 node, extend it with NVEC specific properties
and drop properties that are not needed by NVEC. This results in a DTB
that is a bit cleaner and avoids accidentally using I2C3 and NVEC which
would have them fight over the same hardware resources.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230714174751.4060439-1-robh@kernel.org
MTD subsystem may return -EPROBE_DEFER if something isn't ready yet.
It's important to pass that error up so device will get probed later.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230719084324.14799-1-zajec5@gmail.com
ECC properties 'nand-ecc-strength' and 'nand-ecc-step-size' depends on
each other, so they must be both either set or not set. In first case
ECC core will try to use these values if possible (by checking ECC caps
provided by driver), in second case ECC core will select most optimal
values for both properties.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230717053402.1203724-2-AVKrasnov@sberdevices.ru
'op-cs' is copied in 'fun->mchip_number' which is used to access the
'mchip_offsets' and the 'rnb_gpio' arrays.
These arrays have NAND_MAX_CHIPS elements, so the index must be below this
limit.
Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This
would lead to out-of-bound accesses.
Fixes: 54309d6577 ("mtd: rawnand: fsl_upm: Implement exec_op()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/cd01cba1c7eda58bdabaae174c78c067325803d2.1689803636.git.christophe.jaillet@wanadoo.fr
gcc gets confused when -ftrivial-auto-var-init=pattern is used on sparse
bit fields such as 'struct spi_mem_op', which caused the previous false
positive warning about an uninitialized variable:
drivers/mtd/spi-nor/spansion.c: error: 'op' is used uninitialized [-Werror=uninitialized]
In fact, the variable is fully initialized and gcc does not see it being
used, so the warning is entirely bogus. The problem appears to be
a misoptimization in the initialization of single bit fields when the
rest of the bytes are not initialized.
A previous workaround added another initialization, which ended up
shutting up the warning in spansion.c, though it apparently still happens
in other files as reported by Peter Foley in the gcc bugzilla. The
workaround of adding a fake initialization seems particularly bad
because it would set values that can never be correct but prevent the
compiler from warning about actually missing initializations.
Revert the broken workaround and instead pad the structure to only
have bitfields that add up to full bytes, which should avoid this
behavior in all drivers.
I also filed a new bug against gcc with what I found, so this can
hopefully be addressed in future gcc releases. At the moment, only
gcc-12 and gcc-13 are affected.
Cc: Peter Foley <pefoley2@pefoley.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110743
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108402
Link: https://godbolt.org/z/efMMsG1Kx
Fixes: 420c4495b5 ("mtd: spi-nor: spansion: make sure local struct does not contain garbage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230719190045.4007391-1-arnd@kernel.org
Add myself as Designated Reviewer for Hyperbus support.
I'm assessing the framework and I'd like to get involved
in reviewing further patches.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230620025359.33839-1-tudor.ambarus@linaro.org
According to the device tree bindings, the powergate definition nodes
don't contain clock-names and reset-names properties, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is no "maxim,disable-etr" property (but there is
maxim,enable-etr), neither in the bindings nor in the Linux driver:
tegra210-smaug.dtb: regulator@1c: Unevaluated properties are not allowed ('maxim,disable-etr' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Create the device tree nodes for the SPI1, SPI2 and SPI3 controllers
found on Tegra234.
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Activate UARTA and UARTE functionalities for Orin Nano.
- UARTA is accessible via the 40-pin header with pin 8 and 10 (TX/RX)
- UARTE utilizes the M2.E connector
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit adds the device tree node for UARTE on Tegra234.
Signed-off-by: Gautham Srinivasan <gauthams@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
syzkaller found a race where IOMMUFD_DESTROY increments the refcount:
obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY);
if (IS_ERR(obj))
return PTR_ERR(obj);
iommufd_ref_to_users(obj);
/* See iommufd_ref_to_users() */
if (!iommufd_object_destroy_user(ucmd->ictx, obj))
As part of the sequence to join the two existing primitives together.
Allowing the refcount the be elevated without holding the destroy_rwsem
violates the assumption that all temporary refcount elevations are
protected by destroy_rwsem. Racing IOMMUFD_DESTROY with
iommufd_object_destroy_user() will cause spurious failures:
WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478
Modules linked in:
CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477
Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41
RSP: 0018:ffffc90003067e08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500
R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88
R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe
FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline]
iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813
iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The solution is to not increment the refcount on the IOMMUFD_DESTROY path
at all. Instead use the xa_lock to serialize everything. The refcount
check == 1 and xa_erase can be done under a single critical region. This
avoids the need for any refcount incrementing.
It has the downside that if userspace races destroy with other operations
it will get an EBUSY instead of waiting, but this is kind of racing is
already dangerous.
Fixes: 2ff4bed7fe ("iommufd: File descriptor, context, kconfig and makefiles")
Link: https://lore.kernel.org/r/2-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: syzbot+7574ebfe589049630608@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Arseniy Krasnov says:
====================
virtio/vsock: some updates for MSG_PEEK flag
This patchset does several things around MSG_PEEK flag support. In
general words it reworks MSG_PEEK test and adds support for this flag
in SOCK_SEQPACKET logic. Here is per-patch description:
1) This is cosmetic change for SOCK_STREAM implementation of MSG_PEEK:
1) I think there is no need of "safe" mode walk here as there is no
"unlink" of skbs inside loop (it is MSG_PEEK mode - we don't change
queue).
2) Nested while loop is removed: in case of MSG_PEEK we just walk
over skbs and copy data from each one. I guess this nested loop
even didn't behave as loop - it always executed just for single
iteration.
2) This adds MSG_PEEK support for SOCK_SEQPACKET. It could be implemented
be reworking MSG_PEEK callback for SOCK_STREAM to support SOCK_SEQPACKET
also, but I think it will be more simple and clear from potential
bugs to implemented it as separate function thus not mixing logics
for both types of socket. So I've added it as dedicated function.
3) This is reworked MSG_PEEK test for SOCK_STREAM. Previous version just
sent single byte, then tried to read it with MSG_PEEK flag, then read
it in normal way. New version is more complex: now sender uses buffer
instead of single byte and this buffer is initialized with random
values. Receiver tests several things:
1) Read empty socket with MSG_PEEK flag.
2) Read part of buffer with MSG_PEEK flag.
3) Read whole buffer with MSG_PEEK flag, then checks that it is same
as buffer from 2) (limited by size of buffer from 2) of course).
4) Read whole buffer without any flags, then checks that it is same
as buffer from 3).
4) This is MSG_PEEK test for SOCK_SEQPACKET. It works in the same way
as for SOCK_STREAM, except it also checks combination of MSG_TRUNC
and MSG_PEEK.
====================
Link: https://lore.kernel.org/r/20230725172912.1659970-1-AVKrasnov@sberdevices.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as
SOCK_STREAM test, except it also tests MSG_TRUNC flag.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This new version makes test more complicated by adding empty read,
partial read and data comparisons between MSG_PEEK and normal reads.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds support of MSG_PEEK flag for SOCK_SEQPACKET type of socket.
Difference with SOCK_STREAM is that this callback returns either length
of the message or error.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reworks current implementation of MSG_PEEK logic:
1) Replaces 'skb_queue_walk_safe()' with 'skb_queue_walk()'. There is
no need in the first one, as there are no removes of skb in loop.
2) Removes nested while loop - MSG_PEEK logic could be implemented
without it: just iterate over skbs without removing it and copy
data from each until destination buffer is not full.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two fixes are needed for Tegra194 memory controllers caused by the same
Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now
interconnect from the memory controller, which was set only for
Tegra234, but not for Tegra194, causing probe deferrals. Expose some
dummy interconnect provider for Tegra194, to satisfy PCI driver needs.
-----BEGIN PGP SIGNATURE-----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=1ARR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NC+w
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes
Memory controller drivers - fixes for v6.5
Two fixes are needed for Tegra194 memory controllers caused by the same
Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now
interconnect from the memory controller, which was set only for
Tegra234, but not for Tegra194, causing probe deferrals. Expose some
dummy interconnect provider for Tegra194, to satisfy PCI driver needs.
* tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: make icc_set_bw return zero if BWMGR not supported
memory: tegra: Add dummy implementation on Tegra194
Link: https://lore.kernel.org/r/20230726084811.124038-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev
child, so that runtime PM can translate into the necessary GPC power
domain action
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmS/gEwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM77UAf+Laavt+fI4DZb9CfTAK5BmsDXIl+j
0AyBohtD2nFfFU3iHNvu1Tv3RWdVWhpUtmoL1TxzokdLsFtOkuv4tbPOmMg/cp7g
L6pJs3EPTAczGwhtp+KtUgKerB/WcOKn7iRfJYmVd1toKuKZYvW3exU0oPmfUaKQ
6qQTNdajB4QbOYQPFF7XKpIl28rT1WIpp/SdaZwWoqp/pMTRcHH8OlssHtbOcIOn
4JakAYpshj2OuBCJ1nm3kCKL6a0DUyqZXJTc+6rnPF+vyrWOUTYcFuIPq/3nU/6X
Kcf9MNrg3zg+AlP6pas8i341tFrZoC7OBwjynEf1sgfOWFizu2Fy90hAPw==
=/4j8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTCc9cACgkQYKtH/8kJ
UidoMRAAhKGp1ez1y/wuE0vcOifP+vKw1D6O7AInMji8O85TeNvTLFDocaMW4aNz
s/DQnPDOndn9+Jjl1s6TYFcFU3yOPVL5aHSda4oWbqVUbtGkQAviKjyh2PA29P73
ILa7BjD6CEcuBWaOgWJpZHJYLuCrvQrvBOE7I6rmjs7mufz9FEh6RLd1BmhWaNgV
XOnp/IOHZHB/uIA5uACGoE23uHLO6fUyIS+4xQs0JKXDZbt6boloMeYWJA0GtX46
efk0Z96cpSu8/eEkwx79uEaFFWcx0g74JgdxCPyjDR+16e3f7vAroCNxvbwbeCUk
fZnpVBhcVImGazHi9uyOy+vxOk8OlI85fuRIf9a9f7K9v3Yb2Z8HfioLE5LBu6km
/jAxvNI1MUuEQ4oN5comnaYPGdqcUh1/WlPrxxUF2TKq+2q7aCr2UV7QurVAAT8/
x9qsSK1O97joopAcVpQ/8KdJ6aAeMX7BlsPt/X8HUIzpQOFGfL+oUibtq7lYjzhg
LFznzQyQmfVBScQ6XKiQDq4HX18SHHwNb298ieqIg0s03ZTmzVWrgKHo6P459xBJ
2fpy+T0mAhJD+22dTxyXpY6HkkM1bNTJz5hK8TcDjiu3vlqQRTfVGsaEWSFS579n
peuQtj7idRiOkzGJou5XCa5Vk0a0x/4mMsEgfzfwJb2ydnds4DU=
=nthh
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.5:
- A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
frequency of sk-imx53 board
- Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux
- A couple of imx8mm-venice fixes from Tim Harvey to diable disp_blk_ctrl
- A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
VPU label and gpio-line-names
- Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as bus_power_dev
child, so that runtime PM can translate into the necessary GPC power
domain action
* tag 'imx-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
arm64: dts: freescale: Fix VPU G2 clock
arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
arm64: dts: phycore-imx8mm: Correction in gpio-line-names
arm64: dts: phycore-imx8mm: Label typo-fix of VPU
ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
Link: https://lore.kernel.org/r/20230725075837.GR151430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The corgi_lcd_limit_intensity() function is called from platform
and defined in a driver, but the driver does not see the declaration:
drivers/video/backlight/corgi_lcd.c:434:6: error: no previous prototype for 'corgi_lcd_limit_intensity' [-Werror=missing-prototypes]
434 | void corgi_lcd_limit_intensity(int limit)
Move the prototype into a header that can be included from both
sides to shut up the warning.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SM6125 features only a single PHY (despite a secondary PHY PLL source
being available to the disp_cc_mdss_pclk0_clk_src clock), and downstream
sources for this "trinket" SoC do not define the typical "vcca"
regulator to be available nor used. This, including the register offset
is identical to QCM2290, whose config struct can trivially be reused.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548980/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-13-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Document availability of the 14nm DSI PHY on SM6125. Note that this
compatible uses the SoC-suffix variant, intead of postfixing an
arbitrary number without the sm/sdm portion. The PHY is not powered by
a vcca regulator like on most SoCs, but by the MX power domain that is
provided via the power-domains property and a single corresponding
required-opps.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548979/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-12-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SM6125 is identical to SM6375 including the throttle clock that is also
provided to the MDP node downstream. Note that any SoC other than
SM6375 (currently SC7180 and SM6350) has an unconstrained maximum number
of clocks and could either pass or leave out this "throttle" clock.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548972/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-8-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Both SM6350 and SM6375 support only a single DSI link, and don't have a
corresponding dsi1 node in DTS. Their examples should not suggest an
output interface port on the display-controller node to this inexistant
DSI host, with a dsi1_in label reference that doesn't exist in the
example either.
Fixes: 3b7502b0c2 ("dt-bindings: display/msm: Add SM6350 MDSS")
Fixes: 2a5c1021bc ("dt-bindings: display/msm: Add SM6375 MDSS")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/548961/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-4-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Prior to this change, events without a group would be sorted as if they
were from the location of the first event without a group. For example
instructions and cycles are without a group:
instructions,{imc_free_running/data_read/,imc_free_running/data_write/},cycles
parse events would create an eventual evlist like:
instructions,cycles,{uncore_imc_free_running_0/data_read/,uncore_imc_free_running_1/data_read/,uncore_imc_free_running_0/data_write/,uncore_imc_free_running_1/data_write/}
This is done so that perf metric events, that must always be in a
group, will be adjacent and so can be forced into a group.
This change modifies the sorting so that only force grouped events,
like perf metrics, are sorted and all other events keep their position
with respect to groups in the evlist. The location of the force
grouped event is chosen to match the first force grouped event.
For architectures without force grouped events, ie anything not Intel
Icelake or newer, this should mean sorting and fixing doesn't modify
the event positions except when fixing the grouping for PMUs of things
like uncore events.
Fixes: 347c2f0a09 ("perf parse-events: Sort and group parsed events")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230719001836.198363-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel grouping fix iterates over evsels tracking the leader group
and the current position's group, updating the current position's leader
if an evsel is being forced into a group or groups changed. However,
groups changing isn't a sufficient condition as sorting may have
reordered events and the leader may no longer come first. For this
reason update all leaders whenever they disagree.
This change breaks certain Icelake+ metrics due to bugs in the
kernel. For example, tma_l3_bound with threshold enabled tries to
program the events:
{topdown-retiring,slots,CYCLE_ACTIVITY.STALLS_L2_MISS,topdown-fe-bound,EXE_ACTIVITY.BOUND_ON_STORES,EXE_ACTIVITY.1_PORTS_UTIL,topdown-be-bound,cpu/INT_MISC.RECOVERY_CYCLES,cmask=1,edge/,CYCLE_ACTIVITY.STALLS_L3_MISS,CPU_CLK_UNHALTED.THREAD,CYCLE_ACTIVITY.STALLS_MEM_ANY,EXE_ACTIVITY.2_PORTS_UTIL,CYCLE_ACTIVITY.STALLS_TOTAL,topdown-bad-spec}:W
fixing the perf metric event order gives:
{slots,topdown-retiring,topdown-fe-bound,topdown-be-bound,topdown-bad-spec,CYCLE_ACTIVITY.STALLS_L2_MISS,EXE_ACTIVITY.BOUND_ON_STORES,EXE_ACTIVITY.1_PORTS_UTIL,cpu/INT_MISC.RECOVERY_CYCLES,cmask=1,edge/,CYCLE_ACTIVITY.STALLS_L3_MISS,CPU_CLK_UNHALTED.THREAD,CYCLE_ACTIVITY.STALLS_MEM_ANY,EXE_ACTIVITY.2_PORTS_UTIL,CYCLE_ACTIVITY.STALLS_TOTAL}:W
Both of these return "<not counted>" for all events, whilst they work
with the group removed respecting that the perf metric events must still
be grouped. A vendor events update will need to add METRIC_NO_GROUP to
these metrics to workaround the kernel PMU driver issue.
Fixes: a90cc5a9ee ("perf evsel: Don't let evsel__group_pmu_name() traverse unsorted group")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230719001836.198363-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf metric (topdown) events on Intel Icelake+ machines require a
group, however, they may be next to events that don't require a group.
Consider:
cycles,slots,topdown-fe-bound
The cycles event needn't be grouped but slots and topdown-fe-bound need
grouping.
Prior to this change, as slots and topdown-fe-bound need a group forcing
and all events share the same PMU, slots and topdown-fe-bound would be
forced into a group with cycles.
This is a bug on two fronts, cycles wasn't supposed to be grouped and
cycles can't be a group leader with a perf metric event.
This change adds recognition that cycles isn't force grouped and so it
shouldn't be force grouped with slots and topdown-fe-bound.
Fixes: a90cc5a9ee ("perf evsel: Don't let evsel__group_pmu_name() traverse unsorted group")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230719001836.198363-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If user interrupts wait_event_interruptible() in ublk_ctrl_del_dev(),
return -EINTR and let user know what happens.
Fixes: 0abe39dec0 ("block: ublk: improve handling device deletion")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be
triggered.
Fixes: c732a852b4 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.
Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A collection of device specific fixes, none particularly remarkable.
There's a set of repetitive fixes for the RealTek drivers fixing an
issue with suspend that was replicated in multiple drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTCYMAACgkQJNaLcl1U
h9Do+Af/USa8kLylJn0vzxbfkwpSu3rCbgQurw9KKCDa7lTB7jqZzpCAmPbs7txO
WEwKKz8YSka2YlmXm0rRzhqHIdTdkHlvJ3aircrolfpedeelRyqthhCjdgl6pJAj
3+Kpi7a2QaSqxc2Z45GX4vR86xOmlivWS4gOKZV4GuJt2FkmTIgbGYjtumU0GPla
DneK7yxQpNe68Z+AHxmGoAvKkXggqE49up1PGRiV2nlyioHeQLqDyUlvZsc4MP3Y
Qx/RKvvFoh20HVNKv+iXss7VxYebIzkHuAJLwRDFHkcQajFHcri+ZWEv9lVd/pak
Hiso2ryviIrUFIKfsCWKb9xHYbptCQ==
=HNYO
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.5-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A collection of device specific fixes, none particularly remarkable.
There's a set of repetitive fixes for the RealTek drivers fixing an
issue with suspend that was replicated in multiple drivers.
