Describe the two General Purpose LEDs LED7 and LED8 on the Spider CPU
board, so they can be used as indicator LEDs.
Note that General Purpose LEDs LED9 to LED11 are not added, as they are
connected to GPIO block 4, which can only be accessed from the Control
Domain.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/fdaf6c700b624851039a60733c7f73a413c6d2c5.1690447094.git.geert+renesas@glider.be
Add support for PMOD_MTU3 macro to enable MTU3 node on RZ/G2UL SMARC
EVK.
The MTU3a PWM pins on PMOD0 are muxed with SPI1. Disable SPI1, when
PMOD_MTU3 macro is enabled.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230727081848.100834-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The recommended name for enable GPIOs property in regulator-gpio is
"enable-gpios". This is also required by bindings:
r8a7740-armadillo800eva.dtb: regulator-vccq-sdhi0: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230726070241.103545-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
For MTL and beyond, convert back the 24 bit lut values
read from HW to 16 bit values to maintain parity with
userspace values. This way we avoid pipe config mismatch
for pre-csc lut values.
v2: Add helper function to downscale values (Jani)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230725083002.3779717-3-chaitanya.kumar.borah@intel.com
MTL onwards Degamma LUT/PRE-CSC LUT precision has been increased from
16 bits to 24 bits. Currently, drm framework only supports LUTs up to 16
bit precision. Until a new uapi comes along to support higher bitdepth,
upscale the values sent from userland to 24 bit before writing into the
HW to continue supporting degamma on MTL.
Add helper function to upscale or downscale lut values. Parameters
'to' and 'from' needs to be less than 32. This should be sufficient
as currently there are no lut values exceeding 32 bit.
v2: (Jani)
- Reuse glk_load_degamma_lut()
- Create a helper function for upscaling values
v3: Fix multi line comment style (Uma)
v4: Remove extra line(Ankit)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727123342.4077017-1-chaitanya.kumar.borah@intel.com
The regulator setup was likely copied from other SoCs by mistake. Just
like SM6125 the DSI PHY on this platform is not getting power from a
regulator but from the MX power domain.
Fixes: 572e9fd6d1 ("drm/msm/dsi: Add phy configuration for QCM2290")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/548959/
Link: https://lore.kernel.org/r/20230723-sm6125-dpu-v4-1-a3f287dd6c07@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Rename the intf's enable_compression() op to program_intf_cmd_cfg()
and allow it to accept a struct intf_cmd_mode_cfg to program
all the bits at once. This can be re-used by widebus later on as
well as it touches the same register.
changes in v5:
- rename struct intf_cmd_mode_cfg to dpu_hw_intf_cmd_mode_cfg
- remove couple of comments
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546806/
Link: https://lore.kernel.org/r/20230712012003.2212-5-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
dpu_hw_intf has a few instances of structs which do not have
the dpu_hw prefix. Lets fix this by renaming those structs
and updating the usage of those accordingly.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546805/
Link: https://lore.kernel.org/r/20230712012003.2212-4-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Instead of using a feature bit to decide whether to enable data
compress or not for DSC use-cases, use dpu core's major version
instead by assigning the enable_compression op based on the
dpu core's major version.
To make this possible pass the struct dpu_mdss_version to
dpu_hw_intf_init().
This will avoid defining feature bits for every bit level details of
registers.
changes in v5:
- none
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546803/
Link: https://lore.kernel.org/r/20230712012003.2212-3-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Introduce the dpu core revision back as an entry to the catalog so that
we can just use dpu revision checks and enable those bits which
should be enabled unconditionally and not controlled by a catalog
and also simplify the changes to do something like:
if (dpu_core_revision > xxxxx && dpu_core_revision < xxxxx)
enable the bit;
changes in v5:
- fix the commit text to remove instances of DPU_HW_VER
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546801/
Link: https://lore.kernel.org/r/20230712012003.2212-2-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is no need to call the dev_err_probe() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230727110558.2904084-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174832.4061752-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add support for the Arm Cortex-A520, Cortex-A715, Cortex-A720,
Cortex-X3, and Cortex-X4 CPU PMUs. They are straight-forward additions
with just new compatible strings.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230706205505.308523-2-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add compatible strings for the Arm Cortex-A520, Cortex-A715,
Cortex-A720, Cortex-X3, and Cortex-X4 CPU PMUs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230706205505.308523-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
This driver supports working without ACPI since commit 3f7be43561
("perf/smmuv3: Add devicetree support"), so remove the build dependency.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20230706-smmuv3-pmu-noacpi-v1-1-7083ef189158@axis.com
Signed-off-by: Will Deacon <will@kernel.org>
During a frame transfer in command mode, there could be frequent
LP11 <-> HS transitions when multiple DCS commands are sent mid-frame or
if the DSI controller is running on slow clock and is throttled. To
minimize frame latency due to these transitions, it is recommended to
send the frame in a single burst.
This feature is supported for DSI 6G 1.3 and above, thus enable burst
mode if supported.
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/544551/
Link: https://lore.kernel.org/r/20230608-b4-add-burst-mode-v2-1-2ff468457d46@quicinc.com
[DB: fixed indentation]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, the device core dump mechanism does not dump registers of
sub-blocks within the DSPP, SSPP, DSC, and PINGPONG blocks. Edit
dpu_kms_mdp_snapshot function to account for sub-blocks.
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546192/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-6-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently, the names of main blocks are hardcoded into the
msm_disp_snapshot_add_block function rather than using the name that
already exists in the catalog. Change this to take the name directly from
the catalog instead of hardcoding it.
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/546194/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-5-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
For a device core dump, the registers of sub-blocks are printed under a
title formatted as <mainBlkName_sblkName>. For example, the csc sub-block
for an SSPP main block "sspp_0" would be printed "sspp_0_sspp_csc0". The
title is clearly redundant due to the duplicate "sspp" and "0" that exist
in both the mainBlkName and sblkName. To eliminate this redundancy, remove
the secondary "sspp" and "0" that exist in the sub-block name by
elimanting the "sspp_" prefix and the concatenation of "num" that results
in the redundant "0" suffix. Remove num parameter altogether from relevant
macros as a consequence of it no longer being used.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546198/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-4-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Some sub-blocks in the hw catalog have not been given a name, so when the
registers from that block are dumped, there is no name to reference.
Define names for relevant sub-blocks to fix this.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546199/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-3-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Device core dump add block method adds hardware blocks to dumping queue
with stack behavior which causes the hardware blocks to be printed in
reverse order. Change the addition to dumping queue data structure
from "list_add" to "list_add_tail" for FIFO queue behavior.
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546200/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-1-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To allow userspace to identify the specific implementation of the device,
add an "identifier" sysfs file.
The perf tool can match the Yitian 710 DDR metric through the identifier.
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Acked-by: Ian Rogers <irogers@google.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/1687245156-61215-2-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
The flow-control of `bm_find` is very deeply nested with a conditional
comparing a ternary expression against the pattern inside a for-loop
inside a while-loop inside a for-loop.
Move the inner for-loop into a helper function to reduce the amount of
indentation and make the code easier to read.
Fix indentation and trailing white-space in preceding debug logging
statement.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
In current ctnetlink_parse_tuple_ip() function, nested parsing and
validation is splitting as two parts, which could be cleanup to a
simplified form. As the nla_parse_nested_deprecated function
supports validation in the fly. These two finially reach same place
__nla_validate_parse with same validate flag.
nla_parse_nested_deprecated
__nla_parse(.., NL_VALIDATE_LIBERAL, ..)
__nla_validate_parse
nla_validate_nested_deprecated
__nla_validate_nested(.., NL_VALIDATE_LIBERAL, ..)
__nla_validate
__nla_validate_parse
This commit removes the call to nla_validate_nested_deprecated and pass
cta_ip_nla_policy when do parsing.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
nf_tables relies on manual test of netlink attributes coming from userspace
even in cases where this could be handled via netlink policy.
Convert a bunch of 'flag' attributes to use NLA_POLICY_MASK checks.
Signed-off-by: Florian Westphal <fw@strlen.de>
__NLA_IS_BEINT_TYPE(tp) isn't useful. NLA_BE16/32 are identical to
NLA_U16/32, the only difference is that it tells the netlink validation
functions that byteorder conversion might be needed before comparing
the value to the policy min/max ones.
After this change all policy macros that can be used with UINT types,
such as NLA_POLICY_MASK() can also be used with NLA_BE16/32.
This will be used to validate nf_tables flag attributes which
are in bigendian byte order.
Signed-off-by: Florian Westphal <fw@strlen.de>
When building with W=1, the following warning occurs.
net/netfilter/nf_conntrack_proto_dccp.c:72:27: warning: ‘dccp_state_names’ defined but not used [-Wunused-const-variable=]
static const char * const dccp_state_names[] = {
We include dccp_state_names in the macro
CONFIG_NF_CONNTRACK_PROCFS, since it is only used in the place
which is included in the macro CONFIG_NF_CONNTRACK_PROCFS.
Fixes: 2bc780499a ("[NETFILTER]: nf_conntrack: add DCCP protocol support")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The two symbols __alt_instructions and __alt_instructions_end are not
used, since the vDSO patching code looks for the '.altinstructions' ELF
section directly.
Remove the unused linker symbols.
Fixes: 4e3bca8f7c ("arm64: alternative: patch alternatives in the vDSO")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230726173619.3732-1-jszhang@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Nathan Chancellor reported the following build error when compiling the
kernel with CONFIG_MARCH_Z10=y:
arch/s390/kernel/mcount.S: Assembler messages:
arch/s390/kernel/mcount.S:140: Error: Unrecognized opcode: `aghik'
The aghik instruction is only available since z196. Use the la instruction
instead which is available for all machines.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20230725211105.GA224840@dev-arch.thelio-3990X
Fixes: 1256e70a08 ("s390/ftrace: enable HAVE_FUNCTION_GRAPH_RETVAL")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Link: https://lore.kernel.org/r/20230726061834.1300984-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The comment above diag8c() describes diagnose 210, not diagnose 8c.
Add a proper short description.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since commit bb1520d581 ("s390/mm: start kernel with DAT enabled")
the kernel crashes early during boot when debug pagealloc is enabled:
mem auto-init: stack:off, heap alloc:off, heap free:off
addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630
[..]
Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e
00000000001325fc: eb880002000c srlg %r8,%r8,2
#0000000000132602: b2210051 ipte %r5,%r1,%r0,0
>0000000000132606: b90400d1 lgr %r13,%r1
000000000013260a: 41605008 la %r6,8(%r5)
000000000013260e: a7db1000 aghi %r13,4096
0000000000132612: b221006d ipte %r6,%r13,%r0,0
0000000000132616: e3d0d0000171 lay %r13,4096(%r13)
Call Trace:
__kernel_map_pages+0x14e/0x320
__free_pages_ok+0x23a/0x5a8)
free_low_memory_core_early+0x214/0x2c8
memblock_free_all+0x28/0x58
mem_init+0xb6/0x228
mm_core_init+0xb6/0x3b0
start_kernel+0x1d2/0x5a8
startup_continue+0x36/0x40
Kernel panic - not syncing: Fatal exception: panic_on_oops
This is caused by using large mappings on machines with EDAT1/EDAT2. Add
the code to split the mappings into 4k pages if debug pagealloc is enabled
by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel
command line option.
Fixes: bb1520d581 ("s390/mm: start kernel with DAT enabled")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The test marks as skipped if a syscall with the AT_SYMLINK_NOFOLLOW flag
fails. This is because not all filesystems support changing the mode
bits of symlinks properly. These filesystems return an error but change
the mode bits:
newfstatat(4, "regfile", {st_mode=S_IFREG|0640, st_size=0, ...}, AT_SYMLINK_NOFOLLOW) = 0
newfstatat(4, "symlink", {st_mode=S_IFLNK|0777, st_size=7, ...}, AT_SYMLINK_NOFOLLOW) = 0
syscall_0x1c3(0x4, 0x55fa1f244396, 0x180, 0x100, 0x55fa1f24438e, 0x34) = -1 EOPNOTSUPP (Operation not supported)
newfstatat(4, "regfile", {st_mode=S_IFREG|0640, st_size=0, ...}, AT_SYMLINK_NOFOLLOW) = 0
This happens with btrfs and xfs:
$ tools/testing/selftests/fchmodat2/fchmodat2_test
TAP version 13
1..1
ok 1 # SKIP fchmodat2(symlink)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
$ stat /tmp/ksft-fchmodat2.*/symlink
File: /tmp/ksft-fchmodat2.3NCqlE/symlink -> regfile
Size: 7 Blocks: 0 IO Block: 4096 symbolic link
Device: 7,0 Inode: 133 Links: 1
Access: (0600/lrw-------) Uid: ( 0/ root) Gid: ( 0/ root)
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Message-Id: <4532a04a870ff589ba62ceeacf76f0bd81b9ba01.1689092120.git.legion@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This registers the new fchmodat2 syscall in most places as nuber 452,
with alpha being the exception where it's 562. I found all these sites
by grepping for fspick, which I assume has found me everything.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Message-Id: <a677d521f048e4ca439e7080a5328f21eb8e960e.1689092120.git.legion@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
On the userspace side fchmodat(3) is implemented as a wrapper
function which implements the POSIX-specified interface. This
interface differs from the underlying kernel system call, which does not
have a flags argument. Most implementations require procfs [1][2].
There doesn't appear to be a good userspace workaround for this issue
but the implementation in the kernel is pretty straight-forward.
The new fchmodat2() syscall allows to pass the AT_SYMLINK_NOFOLLOW flag,
unlike existing fchmodat.
[1] https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=17eca54051ee28ba1ec3f9aed170a62630959143;hb=a492b1e5ef7ab50c6fdd4e4e9879ea5569ab0a6c#l35
[2] https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c?id=718f363bc2067b6487900eddc9180c84e7739f80#n28
Co-developed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <f2a846ef495943c5d101011eebcf01179d0c7b61.1689092120.git.legion@kernel.org>
[brauner: pre reviews, do flag conversion in do_fchmodat() directly]
Signed-off-by: Christian Brauner <brauner@kernel.org>
pte_mkdirty() creates dirty states both in SW and HW bits, which is really
not required, either in pte_wrprotect() or pte_modify() for preserving the
HW dirty state. Because pte_mkdirty() sets PTE_DIRTY and clears PTE_RDONLY
as pte_write() always evaluates to be true - otherwise pte_hw_dirty() will
not test out in the first place. Clearing PTE_RDONLY again is not required
here because the pte is already in pte_hw_dirty() but might soon loose its
dirty state thus requiring preservation in SW dirty bit i.e PTE_DIRTY.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230713071518.628440-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
