Checking for availability in bi_size in a function that attempts to
merge into an existing segment is a bit odd, as the limit also applies
when adding a new segment. This code works fine as we always call
__bio_try_merge_page, but contributes to sub-optimal calling conventions
and doesn't lead to clear code.
Move it to two of the callers instead, the third one already has a more
strict check that includes max_hw_segments anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the bi_vcnt out of __bio_try_merge_page and into the two callers
that don't already have it in preparation for additional changes to
__bio_try_merge_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__bio_try_merge_page is a way too low-level helper to assert that the
bio is not cloned. Move the check into bio_add_page and
bio_iov_iter_get_pages instead, which are the high level entry points
that should enforce this variant. bio_add_hw_page already this
check, coverig the third (indirect) caller of __bio_try_merge_page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the SECTOR_SHIFT magic constant instead of the magic number.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230724165433.117645-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_add_hw_page already checks if the number of bytes trying to be added
even fit into max_hw_sectors limit of the queue. Remove the call to
bio_full and just do a check for the smaller of the number of segments
in the bio and the queue max segments limit, and do this cheap check
before the more expensive gap to previous check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jinyoung Choi <j-young.choi@samsung.com>
Link: https://lore.kernel.org/r/20230724165433.117645-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-21 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Wang Ming corrects an error check on i40e.
Jake unlocks crit_lock on allocation failure to prevent deadlock and
stops re-enabling of interrupts when it's not intended for iavf.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED
iavf: fix potential deadlock on allocation failure
i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()
====================
Link: https://lore.kernel.org/r/20230721155812.1292752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmS+jLwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6LMiB/wPcSaPk8b/Tkpwnf0R0yP36tP7YS0V
7SZldc2KRYeQb0Lk1gPTzWRGmddKl2kORh3Y3JkfanKNsiNfhYgUrxeLDkbeDolo
n1Io6fjhK1DzM5cx6Sn+spPpl4QGWV3YQ8PAJm6FjsH5+M5LPzZIK0GGakESCxU7
YDbq3wqglKeI2h1Ae3sQeBd7k26KQXupHfoCyYgUlmOF/u2PuKP0xmn2674QdlvR
m99iE5kqF/HKlrg1OlcOTa7KzknOYPjsVpJ1nTcqxKmUDEYq+niLflBV9Gw8VEyO
Y1naqUJz3TavDVgVIGkjUJEd/+sw3yI2LK7g3+DhugXvMLrqIPa6kmrM
=ayq3
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-07-24
The first patch is by me and adds a missing set of CAN state to
CAN_STATE_STOPPED on close in the gs_usb driver.
The last patch is by Eric Dumazet and fixes a lockdep issue in the CAN
raw protocol.
* tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: raw: fix lockdep issue in raw_release()
can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED
====================
Link: https://lore.kernel.org/r/20230724150141.766047-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix ethtool FDIR logic to not use memory after its release.
In the ice_ethtool_fdir.c file there are 2 spots where code can
refer to pointers which may be missing.
In the ice_cfg_fdir_xtrct_seq() function seg may be freed but
even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)).
In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input
may first fail to be added via ice_fdir_update_list_entry() but then
may be deleted by ice_fdir_update_list_entry.
Terminate in both cases when the returned value of the previous
operation is other than 0, free memory and don't use it anymore.
Reported-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423
Fixes: cac2a27cd9 ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For both IPv4 and IPv6 incoming TCP connections are tracked in a hash
table with a hash over the source & destination addresses and ports.
However, the IPv6 hash is insufficient and can lead to a high rate of
collisions.
The IPv6 hash used an XOR to fit everything into the 96 bits for the
fast jenkins hash, meaning it is possible for an external entity to
ensure the hash collides, thus falling back to a linear search in the
bucket, which is slow.
We take the approach of hash the full length of IPv6 address in
__ipv6_addr_jhash() so that all users can benefit from a more secure
version.
While this may look like it adds overhead, the reality of modern CPUs
means that this is unmeasurable in real world scenarios.
In simulating with llvm-mca, the increase in cycles for the hashing
code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9
on Nehalem (base of ~173).
In commit dd6d2910c5 ("netfilter: conntrack: switch to siphash")
netfilter switched from a jenkins hash to a siphash, but even the faster
hsiphash is a more significant overhead (~20-30%) in some preliminary
testing. So, in this patch, we keep to the more conservative approach to
ensure we don't add much overhead per SYN.
In testing, this results in a consistently even spread across the
connection buckets. In both testing and real-world scenarios, we have
not found any measurable performance impact.
Fixes: 08dcdbf6a7 ("ipv6: use a stronger hash for tcp")
Signed-off-by: Stewart Smith <trawets@amazon.com>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the implementation of XDP of FEC driver, the XDP path
shares the transmit queues with the kernel network stack, so it is
possible to lead to a tx timeout event when XDP uses the tx queue
pretty much exclusively. And this event will cause the reset of the
FEC hardware.
To avoid timeout in this case, we use the txq_trans_cond_update()
interface to update txq->trans_start to jiffies so that watchdog
won't generate a transmit timeout warning.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230721083559.2857312-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP code uses the assumption that the tcp_win_from_space() helper
does not use any TCP-specific field, and thus works correctly operating
on an MPTCP socket.
The commit dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
broke such assumption, and as a consequence most MPTCP connections stall
on zero-window event due to auto-tuning changing the rcv buffer size
quite randomly.
Address the issue syncing again the MPTCP auto-tuning code with the TCP
one. To achieve that, factor out the windows size logic in socket
independent helpers, and reuse them in mptcp_rcv_space_adjust(). The
MPTCP level scaling_ratio is selected as the minimum one from the all
the subflows, as a worst-case estimate.
Fixes: dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20230720-upstream-net-next-20230720-mptcp-fix-rcv-buffer-auto-tuning-v1-1-175ef12b8380@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ebb7fb1557 limited the length of ioend chains to 4096 entries
to improve worst-case latency. Unfortunately, this had the effect of
limiting the performance of:
fio -name write-bandwidth -rw=write -bs=1024Ki -size=32Gi -runtime=30 \
-iodepth 1 -ioengine sync -zero_buffers=1 -direct=0 -end_fsync=1 \
-numjobs=4 -directory=/mnt/test
https://lore.kernel.org/linux-xfs/20230508172406.1CF3.409509F4@e16-tech.com/
The problem ends up being lock contention on the i_pages spinlock as we
clear the writeback bit on each folio (and propagate that up through
the tree). By using larger folios, we decrease the number of folios
to be processed by a factor of 256 for this benchmark, eliminating the
lock contention.
Creating large folios in the buffered write path is also the right
thing to do. It's a project that has been on the back burner for years,
it just hasn't been important enough to do before now.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmS+/8YACgkQDpNsjXcp
gj6jwgf/YpI9mbo63D55QRpMVhvej10aGxZj497IJW5bEqh5cRX0x+kUZkMOW36a
iBB4iiTT+Gl6Z7eJ89W4J7Es48k8hHaprh1WGjlI0zHmBhXvNGHKSk7Egno1BS2v
23YEzBGOdA6dlhDLA9PNIiV5berwTxyNbdv/PadKxDcWy65UvwZ8FCQfli9E0CP6
aeG8PU8RybagYUQYQuCU7TgcCJNpthJHmYBy+iJEZy/9JI0klYvHUaLo6hl1wgXw
Cthc63C4lYtCY/koHFaD8W24RYAZQF+BMTE6oL6X+tA70fRL7ozCGtu4Mjk55kmJ
yNkVqw2ImTuwLRxfxPyEp23Iwz9alA==
=WE72
-----END PGP SIGNATURE-----
Merge tag 'large-folio-writes' of git://git.infradead.org/users/willy/pagecache into iomap-6.6-merge
Create large folios in iomap buffered write path
Commit ebb7fb1557 limited the length of ioend chains to 4096 entries
to improve worst-case latency. Unfortunately, this had the effect of
limiting the performance of:
fio -name write-bandwidth -rw=write -bs=1024Ki -size=32Gi -runtime=30 \
-iodepth 1 -ioengine sync -zero_buffers=1 -direct=0 -end_fsync=1 \
-numjobs=4 -directory=/mnt/test
https://lore.kernel.org/linux-xfs/20230508172406.1CF3.409509F4@e16-tech.com/
The problem ends up being lock contention on the i_pages spinlock as we
clear the writeback bit on each folio (and propagate that up through
the tree). By using larger folios, we decrease the number of folios
to be processed by a factor of 256 for this benchmark, eliminating the
lock contention.
Creating large folios in the buffered write path is also the right
thing to do. It's a project that has been on the back burner for years,
it just hasn't been important enough to do before now.
* tag 'large-folio-writes' of git://git.infradead.org/users/willy/pagecache:
iomap: Copy larger chunks from userspace
iomap: Create large folios in the buffered write path
filemap: Allow __filemap_get_folio to allocate large folios
filemap: Add fgf_t typedef
iomap: Remove unnecessary test from iomap_release_folio()
doc: Correct the description of ->release_folio
iomap: Remove large folio handling in iomap_invalidate_folio()
iov_iter: Add copy_folio_from_iter_atomic()
iov_iter: Handle compound highmem pages in copy_page_from_iter_atomic()
iov_iter: Map the page later in copy_page_from_iter_atomic()
[djwong: yay amortizations!]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Replace kstrtoint() by kstrtobool() in the sysfs _store() functions.
This improves the user usability and simplify the code.
With this fix, it is now possible to use [YyNn] to set and unset a
feature. Old behaviour is still unchanged.
kstrtobool() is also safer and doesn't need the extra validation that
is required when converting a string to bool (end field in the struct),
which makes the code simpler.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721092146.4036622-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the sysfs.rst documentation, _show() functions should only
use sysfs_emit() instead of snprintf().
Since snprintf() shouldn't be used in the sysfs _show() path, replace it
by sysfs_emit().
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721092146.4036622-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit under 'Fixes' tag introduced new member to struct
net_device without providing description of it - fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20230720141613.61488b9e@canb.auug.org.au/
Fixes: 13ce2daa25 ("xsk: add new netlink attribute dedicated for ZC max frags")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Simon Horman <simon.horman@corigine.com> # build-tested
Link: https://lore.kernel.org/r/20230721145808.596298-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
currently on 6.4 net/main:
# ip link add dummy1 type dummy
# echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr
# ip link set dummy1 up
# ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic
valid_lft 604800sec preferred_lft 86172sec
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1
(can wait a few seconds if you want to, the above delete isn't [directly] the problem)
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic
valid_lft 604797sec preferred_lft 86169sec
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
This patch prevents this new 'global temporary dynamic' address from being
created by the deletion of the related (same subnet prefix) 'mngtmpaddr'
(which is triggered by there already being no temporary addresses).
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: 53bd674915 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses")
Reported-by: Xiao Ma <xiaom@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in atl1e_tso_csum, it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Fixes: a6a5325239 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230720144219.39285-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in atl1_tso(), it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Fixes: 401c0aabec ("atl1: simplify tx packet descriptor")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230722142511.12448-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we have a large folio, we can copy in larger chunks than PAGE_SIZE.
Start at the maximum page cache size and shrink by half every time we
hit the "we are short on memory" problem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Use the size of the write as a hint for the size of the folio to create.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Allow callers of __filemap_get_folio() to specify a preferred folio
order in the FGP flags. This is only honoured in the FGP_CREATE path;
if there is already a folio in the page cache that covers the index,
we will return it, no matter what its order is. No create-around is
attempted; we will only create folios which start at the specified index.
Unmodified callers will continue to allocate order 0 folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Similarly to gfp_t, define fgf_t as its own type to prevent various
misuses and confusion. Leave the flags as FGP_* for now to reduce the
size of this patch; they will be converted to FGF_* later. Move the
documentation to the definition of the type insted of burying it in the
__filemap_get_folio() documentation.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
The check for the folio being under writeback is unnecessary; the caller
has checked this and the folio is locked, so the folio cannot be under
writeback at this point.
The comment is somewhat misleading in that it talks about one specific
situation in which we can see a dirty folio. There are others, so change
the comment to explain why we can't release the iomap_page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The filesystem ->release_folio method is called under more circumstances
now than when the documentation was written. The second sentence
describing the interpretation of the return value is the wrong polarity
(false indicates failure, not success). And the third sentence is also
wrong (the kernel calls try_to_free_buffers() instead).
So replace the entire paragraph with a detailed description of what the
state of the folio may be, the meaning of the gfp parameter, why the
method is being called and what the filesystem is expected to do.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
We do not need to release the iomap_page in iomap_invalidate_folio()
to allow the folio to be split. The splitting code will call
->release_folio() if there is still per-fs private data attached to
the folio. At that point, we will check if the folio is still dirty
and decline to release the iomap_page. It is possible to trigger the
warning in perfectly legitimate circumstances (eg if a disk read fails,
we do a partial write to the folio, then we truncate the folio), which
will cause those writes to be lost.
Fixes: 60d8231089 ("iomap: Support large folios in invalidatepage")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a folio wrapper around copy_page_from_iter_atomic().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
copy_page_from_iter_atomic() already handles !highmem compound
pages correctly, but if we are passed a highmem compound page,
each base page needs to be mapped & unmapped individually.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Remove a couple of calls to kunmap_atomic() in the rare error cases.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
RCU Tasks Trace is quite specialized, having been created specifically
for sleepable BPF programs. Because it allows general blocking within
readers, any new use of RCU Tasks Trace must take current use cases into
account. Therefore, update checkpatch.pl to complain about use of any of
the RCU Tasks Trace API members outside of BPF and outside of RCU itself.
[ paulmck: Apply Joe Perches feedback. ]
Cc: Andy Whitcroft <apw@canonical.com> (maintainer:CHECKPATCH)
Cc: Joe Perches <joe@perches.com> (maintainer:CHECKPATCH)
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> (reviewer:CHECKPATCH)
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Single fix for a potential regression over a misunderstanding of the
blk_get_queue() api.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZL7MmSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishS5CAP9nqusg
7fN/2nO7MdZNeZwHvNVmgBOVO7z4vPypCTN8oAEAvMQUcXjQFUuIm4qJalF0UPKv
GxQjWcd2Pm7rYI6i/9Y=
=/KLr
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix for a potential regression over a misunderstanding of the
blk_get_queue() api"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: Fix checking return value of blk_get_queue()
Add an LTO build option, that sets the appropriate CFLAGS and CXXFLAGS
values.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230724201247.748146-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC LTO will complain that the array length varies for the arch_tests
weak symbol. Use extern/static and architecture determining #if to
workaround this problem.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230724201247.748146-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With GCC LTO a potential use uninitialized is spotted:
```
In function ‘parse_events_config_bpf’,
inlined from ‘parse_events_load_bpf’ at util/parse-events.c:874:8:
util/parse-events.c:792:37: error: ‘error_pos’ may be used uninitialized [-Werror=maybe-uninitialized]
792 | idx = term->err_term + error_pos;
| ^
util/parse-events.c: In function ‘parse_events_load_bpf’:
util/parse-events.c:765:13: note: ‘error_pos’ was declared here
765 | int error_pos;
| ^
```
So initialize at declaration.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230724201247.748146-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_event__read_stat_config will assign values based on number of
tags and tag values. Initialize the structs to zero before they are
assigned so that no uninitialized values can be seen.
This potential error was reported by GCC with LTO enabled.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230724201247.748146-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The driver now uses the backlight interface, which breaks when that
is disabled:
ld.lld: error: undefined symbol: devm_backlight_device_register
Enforce the necessary Kconfig dependency to avoid this.
Fixes: c2268daa65 ("drm/panel: ld9040: Register a backlight device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724121736.1293270-1-arnd@kernel.org
The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:
wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16
Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Trying to restrict the '$'-prefix change to RISC-V caused some fallout,
so let's just treat all those symbols as special.
Fixes: c05780ef3c ("module: Ignore RISC-V mapping symbols too")
Link: https://lore.kernel.org/all/20230712015747.77263-1-wangkefeng.wang@huawei.com/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Merge series from Dmytro Maluka <dmy@semihalf.com>:
This series includes 2 patches related to (but not fixing) the following
I2C failure which occurs sometimes during system suspend or resume and
indicates a problem with a spurious DA7219 interrupt:
[ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended
[ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440
...
[ 355.876462] Call Trace:
[ 355.876468] <TASK>
[ 355.876475] ? update_load_avg+0x1b3/0x615
[ 355.876484] __i2c_transfer+0x101/0x1d8
[ 355.876494] i2c_transfer+0x74/0x10d
[ 355.876504] regmap_i2c_read+0x6a/0x9c
[ 355.876513] _regmap_raw_read+0x179/0x223
[ 355.876521] regmap_raw_read+0x1e1/0x28e
[ 355.876527] regmap_bulk_read+0x17d/0x1ba
[ 355.876532] ? __wake_up+0xed/0x1bb
[ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184]
[ 355.876556] irq_thread+0x13c/0x231
[ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f
[ 355.876570] ? irq_thread_fn+0x4d/0x4d
[ 355.876576] kthread+0x13a/0x152
[ 355.876581] ? synchronize_irq+0xc3/0xc3
[ 355.876587] ? kthread_blkcg+0x31/0x31
[ 355.876592] ret_from_fork+0x1f/0x30
[ 355.876601] </TASK>
This log shows that DA7219 AAD interrupt handler da7219_aad_irq_thread()
is unexpectedly running when DA7219 is suspended and should not generate
interrupts. As a result, the IRQ handler is trying to read AAD IRQ event
status over I2C and is hitting the I2C driver "Transfer while suspended"
failure.
Patch #1 adds synchronize_irq() when suspending DA7219, to prevent the
IRQ handler from running after suspending if there is a pending IRQ
generated before suspending. With this patch the above failure is still
reproducible, so this patch does not fix any real observed issue so far,
but at least is useful for confirming that the above issue is not caused
by a pending IRQ but rather looks like a DA7219 hardware issue with an
unexpectedly generated IRQ.
Patch #2 does not fix the above issue either, but it prevents its
potentially harmful side effects. With the existing code, if the issue
occurs and the IRQ handler fails to read the AAD IRQ events status over
I2C, it does not check that and tries to use the garbage uninitialized
value of the events status, potentially reporting bogus events. This
patch fixes that by adding missing error checking.
In fact I'm sending these patches not only to submit them for review but
also to ask Renesas folks for any hints on a possible cause of the
described DA7219 issue (AAD interrupts spuriously firing after jack
detection is already disabled) or how to debug it further.
Add driver for pin controller in Low Power Audio SubSystem (LPASS). The
driver is similar to SM8250 LPASS pin controller, with difference in one
new pin (gpio14) belonging to swr_tx_data.
Link: https://lore.kernel.org/r/20230719192058.433517-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DASD driver has certain types of requests that might be rejected by
the storage server or z/VM because they are not supported. Since the
missing support of the command is not a real issue there is no user
visible kernel error message for this.
For copy pair setups there is a specific error that IO is not allowed on
secondary devices. This error case is explicitly handled and an error
message is printed.
The code checking for the error did use a bitwise 'and' that is used to
check for specific bits. But in this case the whole sense byte has to
match.
This leads to the problem that the copy pair related error message is
erroneously printed for other error cases that are usually not reported.
This might heavily confuse users and lead to follow on actions that might
disrupt application processing.
Fix by checking the sense byte for the exact value and not single bits.
Cc: stable@vger.kernel.org # 6.1+
Fixes: 1fca631a11 ("s390/dasd: suppress generic error messages for PPRC secondary devices")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The DASD device driver has a function to requeue requests to the
blocklayer.
This function is used in various cases when basic settings for the device
have to be changed like High Performance Ficon related parameters or copy
pair settings.
The functions iterates over the device->ccw_queue and also removes the
requests from the block->ccw_queue.
In case the device is started on an alias device instead of the base
device it might be removed from the block->ccw_queue without having it
canceled properly before. This might lead to a hanging device since the
request is no longer on a queue and can not be handled properly.
Fix by iterating over the block->ccw_queue instead of the
device->ccw_queue. This will take care of all blocklayer related requests
and handle them on all associated DASD devices.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a DASD request fails an error recovery procedure (ERP) request might
be built as a copy of the original request to do error recovery.
The ERP request gets a number of retries assigned.
This number is always 256 no matter what other value might have been set
for the original request. This is not what is expected when a user
specifies a certain amount of retries for the device via sysfs.
Correctly use the number of retries of the original request for ERP
requests.
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Quiesce and resume are functions that tell the DASD driver to stop/resume
issuing I/Os to a specific DASD.
On resume dasd_schedule_block_bh() is called to kick handling of IO
requests again. This does unfortunately not cover internal requests which
are used for path verification for example.
This could lead to a hanging device when a path event or anything else
that triggers internal requests occurs on a quiesced device.
Fix by also calling dasd_schedule_device_bh() which triggers handling of
internal requests on resume.
Fixes: 8e09f21574 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch fixes an issue affecting the Wifi/Bluetooth connectivity on
ROCK Pi 4 boards. Commit f471b1b2db ("arm64: dts: rockchip: Fix Bluetooth
on ROCK Pi 4 boards") introduced a problem with the clock configuration.
Specifically, the clock-names property of the sdio-pwrseq node was not
updated to 'lpo', causing the driver to wait indefinitely for the wrong clock
signal 'ext_clock' instead of the expected one 'lpo'. This prevented the proper
initialization of Wifi/Bluetooth chip on ROCK Pi 4 boards.
To address this, this patch updates the clock-names property of the
sdio-pwrseq node to "lpo" to align with the changes made to the bluetooth node.
This patch has been tested on ROCK Pi 4B.
Fixes: f471b1b2db ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards")
Cc: stable@vger.kernel.org
Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com>
Link: https://lore.kernel.org/r/ZLbATQRjOl09aLAp@zephyrusG14
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
