Port VLAN in this case means push and pop VLAN action on specific vid.
There are a few limitation in hardware:
- push and pop can't be used separately
- if port VLAN is used there can't be any trunk VLANs, because pop
action is done on all traffic received by VSI in port VLAN mode
- port VLAN mode on uplink port isn't supported
Reflect these limitations in code using dev_info to inform the user
about unsupported configuration.
In bridge mode there is a need to configure port vlan without resetting
VFs. To do that implement ice_port_vlan_on/off() functions. They are
only configuring correct vlan_ops to allow setting port vlan.
We also need to clear port vlan without resetting the VF which is not
supported right now. Change it by implementing clear_port_vlan ops.
As previous VLAN configuration isn't always the same, store current
config while creating port vlan and restore it in clear function.
Configuration steps:
- configure switchdev with bridge
- #bridge vlan add dev eth0 vid 120 pvid untagged
- #bridge vlan add dev eth1 vid 120 pvid untagged
- ping from VF0 to VF1
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for matching on VLAN tag in bridge offloads.
Currently only trunk mode is supported.
To enable VLAN filtering (existing FDB entries will be deleted):
ip link set $BR type bridge vlan_filtering 1
To add VLANs to bridge in trunk mode:
bridge vlan add dev $PF1 vid 110-111
bridge vlan add dev $VF1_PR vid 110-111
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce new "guard" rule upon FDB entry creation.
It matches on src_mac, has valid bit unset, allow_pass_l2 set
and has a nop action.
Previously introduced "forward" rule matches on dst_mac, has valid
bit set, need_pass_l2 set and has a forward action.
With these rules, a packet will be offloaded only if FDB exists in both
directions (RX and TX).
Let's assume link partner sends a packet to VF1: src_mac = LP_MAC,
dst_mac = is VF1_MAC. Bridge adds FDB, two rules are created:
1. Guard rule matching on src_mac == LP_MAC
2. Forward rule matching on dst_mac == LP_MAC
Now VF1 responds with src_mac = VF1_MAC, dst_mac = LP_MAC. Before this
change, only one rule with dst_mac == LP_MAC would have existed, and the
packet would have been offloaded, meaning the bridge wouldn't add FDB in
the opposite direction. Now, the forward rule matches (dst_mac == LP_MAC),
but it has need_pass_l2 set an there is no guard rule with
src_mac == VF1_MAC, so the packet goes through slow-path and the bridge
adds FDB. Two rules are created:
1. Guard rule matching on src_mac == VF1_MAC
2. Forward rule matching on dst_mac == VF1_MAC
Further packets in both directions will be offloaded.
The same example is true in opposite direction (i.e. VF1 is the first to
send a packet out).
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Listen for SWITCHDEV_FDB_{ADD|DEL}_TO_DEVICE events while in switchdev
mode. Accept these events on both uplink and VF PR ports. Add HW
rules in newly created workqueue. FDB entries are stored in rhashtable
for lookup when removing the entry and in the list for cleanup
purpose. Direction of the HW rule depends on the type of the ports
on which the FDB event was received:
ICE_ESWITCH_BR_UPLINK_PORT:
TX rule that forwards the packet to the LAN (egress).
ICE_ESWITCH_BR_VF_REPR_PORT:
RX rule that forwards the packet to the VF associated
with the port representor.
In both cases the rule matches on the dst mac address.
All the FDB entries are stored in the bridge structure.
When the port is removed all the FDB entries associated with
this port are removed as well. This is achieved thanks to the reference
to the port that FDB entry holds.
In the fwd rule we use only one lookup type (MAC address)
but lkups_cnt variable is already introduced because
we will have more lookups in the subsequent patches.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
With this patch, ice driver is able to track if the port
representors or uplink port were added to the linux bridge in
switchdev mode. Listen for NETDEV_CHANGEUPPER events in order to
detect this. ice_esw_br data structure reflects the linux bridge
and stores all the ports of the bridge (ice_esw_br_port) in
xarray, it's created when the first port is added to the bridge and
freed once the last port is removed. Note that only one bridge is
supported per eswitch.
Bridge port (ice_esw_br_port) can be either a VF port representor
port or uplink port (ice_esw_br_port_type). In both cases bridge port
holds a reference to the VSI, VF's VSI in case of the PR and uplink
VSI in case of the uplink. VSI's index is used as an index to the
xarray in which ports are stored.
Add a check which prevents configuring switchdev mode if uplink is
already added to any bridge. This is needed because we need to listen
for NETDEV_CHANGEUPPER events to record if the uplink was added to
the bridge. Netdevice notifier is registered after eswitch mode
is changed to switchdev.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In switchdev mode uplink VSI is supposed to receive all packets that
were not matched by existing filters. If ICE_AQ_VSI_SW_FLAG_LOCAL_LB
bit is unset and we have a filter associated with uplink VSI
which matches on dst mac equal to MAC1, then packets with src mac equal
to MAC1 will be pruned from reaching uplink VSI.
Fix this by updating uplink VSI with ICE_AQ_VSI_SW_FLAG_LOCAL_LB bit
set when configuring switchdev mode.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In switchdev mode, uplink VSI is configured to be default
VSI which means it will receive all unmatched packets.
In order to receive vlan packets we need to disable vlan pruning
as well. This is done by dis_rx_filtering vlan op.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is possibility that ice_eswitch_port_start_xmit might be
called while some resources are still not allocated which might
cause NULL pointer dereference. Fix this by checking if switchdev
configuration was finished.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Don't allow to change promisc mode in switchdev mode.
When switchdev is configured, PF netdev is set to be a
default VSI. This is needed for the slow-path to work correctly.
All the unmatched packets will be directed to PF netdev.
It is possible that this setting might be overwritten by
ndo_set_rx_mode. Prevent this by checking if switchdev is
enabled in ice_set_rx_mode.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Advanced rules for ctrl VSI will be removed anyway when the
VSI will cleaned up, no need to do it explicitly.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i915_request contains direct alias to i915, there is no point to go via
rq->engine->i915.
v2: added missing rq.i915 initialization in measure_breadcrumb_dw.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720113002.1541572-1-andrzej.hajda@intel.com
This patch will add the new test, which covers the prctl call
PR_SET_NAME command. The test tries to give a name using the PR_SET_NAME
call and then confirm it that it changed correctly by using PR_GET_NAME.
It also tries to rename it with empty name.In the test PR_GET_NAME is
tested by passing null pointer to it and check its behaviour.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Most fbdev drivers depend on framebuffer_alloc() to initialize the
allocated memory to 0. Document this guarantee.
v3:
* slightly reword the sentence (Miguel)
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Cc: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-19-tzimmermann@suse.de
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by devm_kzalloc(). So do not
set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-17-tzimmermann@suse.de
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by a static declaration. So do
not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-16-tzimmermann@suse.de
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by framebuffer_alloc(). So
do not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v4:
* clarify commit message (Geert, Dan)
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jaya Kumar <jayalk@intworks.biz>
Cc: Helge Deller <deller@gmx.de>
Cc: Peter Jones <pjones@redhat.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Maik Broemme <mbroemme@libmpq.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Michal Januszewski <spock@gentoo.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-15-tzimmermann@suse.de
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by kzalloc(). So do not
set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v4:
* clarify commit message (Geert, Dan)
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-14-tzimmermann@suse.de
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do
not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-13-tzimmermann@suse.de
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by kzalloc(). So do not
set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-12-tzimmermann@suse.de
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do
not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-11-tzimmermann@suse.de
The flag FBINFO_FLAG_DEFAULT is 0 and has no effect, as struct
fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do
not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Robin van der Gracht <robin@protonic.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-10-tzimmermann@suse.de
Assign FB_MODE_IS_UNKNOWN to sh7763fb_videomode.flag instead of
FBINFO_FLAG_DEFAULT. Both are 0, so the stored value does not change.
FBINFO_FLAG_DEFAULT is a flag for a framebuffer in struct fb_info.
Flags for videomodes are prefixed with FB_MODE_.
v3:
* include board name in commit message (Adrian)
v2:
* assign FB_MODE_IS_UNKNOWN (Adrian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-9-tzimmermann@suse.de
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags
has been allocated to zero by framebuffer_alloc(). So do not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-8-tzimmermann@suse.de
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags
has been allocated to zero by dmam_alloc_coherent(__GFP_ZERO). So do not
set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Timur Tabi <timur@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-7-tzimmermann@suse.de
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags
has been allocated to zero by framebuffer_alloc(). So do not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v4:
* clarify commit message (Geert, Dan)
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Maik Broemme <mbroemme@libmpq.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-6-tzimmermann@suse.de
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags
has been allocated to zero by devm_kzalloc(). So do not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v4:
* clarify commit message (Geert, Dan)
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-5-tzimmermann@suse.de
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags
has been allocated to zero by kzalloc(). So do not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v4:
* clarify commit message (Geert, Dan)
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-4-tzimmermann@suse.de
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags
has been allocated to zero by a static declaration. So do not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v4:
* clarify commit message (Geert, Dan)
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-3-tzimmermann@suse.de
The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags
has been allocated to zero by framebuffer_alloc(). So do not set it.
Flags should signal differences from the default values. After cleaning
up all occurrences of FBINFO_DEFAULT, the token will be removed.
v2:
* fix commit message (Miguel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-2-tzimmermann@suse.de
Use rm -df instead of rmdir -p since rmdir requires the directory exist
so it causes "make -C tools clean" failed if someone only builds other
tools but not counter.
Fixes: 228354ed69 ("tools/counter: Makefile: Remove lingering 'include' directories on make clean")
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Link: https://lore.kernel.org/r/d4080db5-1825-2848-079a-8bb674d8ee44@gmail.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
We haven't heard anything from these folks in years. I've been reviewing
many submissions and plan to keep doing so.
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Ganapathi Bhat <ganapathi017@gmail.com>
Cc: Sharvari Harisangam <sharvari.harisangam@nxp.com>
Cc: Xinming Hu <huxinming820@gmail.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230721160603.1.Idf0e8025f59c62d73c08960638249b58cf215acc@changeid
On DBDC devices the first (internal) phy is only capable of using
2.4 GHz band, and the 5 GHz band is exposed via a separate phy object,
so avoid the false advertising.
Reported-by: Rani Hod <rani.hod@gmail.com>
Closes: https://github.com/openwrt/openwrt/pull/12361
Fixes: 7660a1bd0c ("mt76: mt7615: register ext_phy if DBDC is detected")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230605073408.8699-1-fercerpav@gmail.com
There is only one debug unit in the sam9x60 SOC and it has the chipid
register. So, the dbgu compatible strings are valid only for debug usart.
Defining these dbgu compatible strings are not valid for flexcom usart.
So adding the items which is valid only for flexcom usart and removing
the microchip,sam9x60-usart compatible string from the enum list as no
usart node defines only this specific compatible string.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230718065735.10187-2-durai.manickamkr@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Set of fixes addressing issues:
1. Possible use of uninitialised results structure in the SMCCC SOC_ID
driver if the driver fails to complete the initialisation
2. Missed signed error return value handling from simple_write_to_buffer()
used in scmi_dbg_raw_mode_common_write()
3. The OF node reference obtained is not dropped if node is incompatible
with "arm,scmi-shmem" in the mailbox as well as SMC transport channel
setup
4. The possibility of a late response to an in-flight pending transaction
that could end up triggering the interrupt handler after the SCMI core
has cleaned up the transport channel as part of core driver remove
-----BEGIN PGP SIGNATURE-----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=oZRl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=FE9J
-----END PGP SIGNATURE-----
Merge tag 'scmi-smccc-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI and SMCCC fixes for v6.5
Set of fixes addressing issues:
1. Possible use of uninitialised results structure in the SMCCC SOC_ID
driver if the driver fails to complete the initialisation
2. Missed signed error return value handling from simple_write_to_buffer()
used in scmi_dbg_raw_mode_common_write()
3. The OF node reference obtained is not dropped if node is incompatible
with "arm,scmi-shmem" in the mailbox as well as SMC transport channel
setup
4. The possibility of a late response to an in-flight pending transaction
that could end up triggering the interrupt handler after the SCMI core
has cleaned up the transport channel as part of core driver remove
* tag 'scmi-smccc-fixes-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix chan_free cleanup on SMC
firmware: arm_scmi: Drop OF node reference in the transport channel setup
firmware: arm_scmi: Fix signed error return values handling
firmware: smccc: Fix use of uninitialised results structure
Link: https://lore.kernel.org/r/20230721114052.3371923-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
gas supports several different forms for .section for ELF targets,
including:
.section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]]
and:
.section "NAME"[, #FLAGS...]
In several places we use a mix of these two forms:
.section NAME, #FLAGS...
A current development snapshot of binutils (2.40.50.20230611) treats
this mixed syntax as an error.
Change to consistently use:
.section NAME, "FLAGS"
as is used elsewhere in the kernel.
Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6.4%7Erc6-1%7Eexp1&stamp=1686907300&raw=1
Signed-off-by: Ben Hutchings <benh@debian.org>
Tested-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Link: https://lore.kernel.org/r/ZIyBaueWT9jnTwRC@decadent.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
In JH7110 SoC, the spi module needs to use "arm,primecell-periphid" to
override the h/w ID value to correctly init "spi_dev", so add
"primecell.yaml" as the reference file for YAML.
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Link: https://lore.kernel.org/r/20230724101054.25268-2-william.qiu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver would never call clk_enable() if the PWM channel was already
enabled in bootloader which lead to dump the warning message "the PWM
clock already disabled" when turning off the PWM channel.
Add atmel_pwm_enable_clk_if_on() in probe function to enable clock if
the PWM channel was already enabled in bootloader.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Even the 'disable_send_metrics' is true so when the session is
being opened it will always trigger to send the metric for the
first time.
Cc: stable@vger.kernel.org
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In order to support newer style bindings for combo PHYs, populate
offsets for all Combo QMP PHY configurations.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-4-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For the existing PHYs for new binding we are going to drop ref_clk_src
clock and always use ref clock. Rather than introducing additional code
to handle legacy vs current bindings (and clock names), use
devm_clk_bulk_get_optional() when new bindings are used and
devm_clk_bulk_get_all() when legacy bindings are in place.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Migrate legacy bindings (described in qcom,sc7180-qmp-usb3-dp-phy.yaml)
to qcom,sc8280xp-qmp-usb43dp-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711120916.4165894-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
