Three members of struct fec_enet_private have not been used since
they were first introduced into the FEC driver (commit 6605b730c0
("FEC: Add time stamping code and a PTP hardware clock")). Namely,
last_overflow_check, rx_hwtstamp_filter and base_incval. These
unused members make the struct fec_enet_private a bit messy and
might confuse the readers. There is no reason to keep them in the
FEC driver any longer.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230718090928.2654347-4-wei.fang@nxp.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fec_enet_init() is only invoked when the FEC driver probes, and
the network device of FEC is not been brought up at this moment. So
the fec_set_mac_address() does nothing and just returns zero when it
is invoked in the fec_enet_init(). Actually, the MAC address is set
into the hardware through fec_restart() which is also called in the
fec_enet_init().
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230718090928.2654347-3-wei.fang@nxp.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the commit 95698ff617 ("net: fec: using page pool to manage
RX buffers") has been applied, all the rx packets, no matter small
packets or large packets are put directly into the kernel networking
buffers. That is to say, the rx copybreak function has been removed
since then, but the related code has not been completely cleaned up.
So the purpose of this patch is to clean up the remaining related
code of rx copybreak.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230718090928.2654347-2-wei.fang@nxp.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'clock_in_out' property is optional, and it can be one of two enums.
The binding does not specify what is the behavior when the property is
missing altogether.
Hence, add a default value that the driver can use.
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718090914.282293-1-eugen.hristev@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 3f4ca5fafc.
Commit 3f4ca5fafc ("tcp: avoid the lookup process failing to get sk in
ehash table") reversed the order in how a socket is inserted into ehash
to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are
swapped. However, it introduced another lookup failure.
The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU
and does not have SOCK_RCU_FREE, so the socket could be reused even while
it is being referenced on another CPU doing RCU lookup.
Let's say a socket is reused and inserted into the same hash bucket during
lookup. After the blamed commit, a new socket is inserted at the end of
the list. If that happens, we will skip sockets placed after the previous
position of the reused socket, resulting in ehash lookup failure.
As described in Documentation/RCU/rculist_nulls.rst, we should insert a
new socket at the head of the list to avoid such an issue.
This issue, the swap-lookup-failure, and another variant reported in [0]
can all be handled properly by adding a locked ehash lookup suggested by
Eric Dumazet [1].
However, this issue could occur for every packet, thus more likely than
the other two races, so let's revert the change for now.
Link: https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/ [0]
Link: https://lore.kernel.org/netdev/CANn89iK8snOz8TYOhhwfimC7ykYA78GA3Nyv8x06SZYa1nKdyA@mail.gmail.com/ [1]
Fixes: 3f4ca5fafc ("tcp: avoid the lookup process failing to get sk in ehash table")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717215918.15723-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, there are two major issues with stmmac driver statistics
First of all, statistics in stmmac_extra_stats, stmmac_rxq_stats
and stmmac_txq_stats are 32 bit variables on 32 bit platforms. This
can cause some stats to overflow after several minutes of
high traffic, for example rx_pkt_n, tx_pkt_n and so on.
Secondly, if HW supports multiqueues, there are frequent cacheline
ping pongs on some driver statistic vars, for example, normal_irq_n,
tx_pkt_n and so on. What's more, frequent cacheline ping pongs on
normal_irq_n happens in ISR, this makes the situation worse.
To improve the driver, we convert those statistics to 64 bit, implement
ndo_get_stats64 and update .get_ethtool_stats implementation
accordingly. We also use per-queue statistics where necessary to remove
the cacheline ping pongs as much as possible to make multiqueue
operations faster. Those statistics which are not possible to overflow
and not frequently updated are kept as is.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230717160630.1892-3-jszhang@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FWICT, the common style in other network drivers: the network
statistics are not cleared since initialization, follow the common
style for stmmac.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230717160630.1892-2-jszhang@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=e8vA
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2023-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2023-07-19
Just a leftover from the last development cycle:
1) delete a clear to zero of encap_oa, it is not needed anymore.
From Leon Romanovsky.
* tag 'ipsec-next-2023-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: delete not-needed clear to zero of encap_oa
====================
Link: https://lore.kernel.org/r/20230719100228.373055-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds a function to dump a DRM GPU VA space and a macro for
drivers to register the struct drm_info_list 'gpuvas' entry.
Most likely, most drivers might maintain one DRM GPU VA space per struct
drm_file, but there might also be drivers not having a fixed relation
between DRM GPU VA spaces and a DRM core infrastructure, hence we need the
indirection via the driver iterating it's maintained DRM GPU VA spaces.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-3-dakr@redhat.com
Add infrastructure to keep track of GPU virtual address (VA) mappings
with a decicated VA space manager implementation.
New UAPIs, motivated by Vulkan sparse memory bindings graphics drivers
start implementing, allow userspace applications to request multiple and
arbitrary GPU VA mappings of buffer objects. The DRM GPU VA manager is
intended to serve the following purposes in this context.
1) Provide infrastructure to track GPU VA allocations and mappings,
using an interval tree (RB-tree).
2) Generically connect GPU VA mappings to their backing buffers, in
particular DRM GEM objects.
3) Provide a common implementation to perform more complex mapping
operations on the GPU VA space. In particular splitting and merging
of GPU VA mappings, e.g. for intersecting mapping requests or partial
unmap requests.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Donald Robson <donald.robson@imgtec.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720001443.2380-2-dakr@redhat.com
Commit fcaa174a9c ("scsi/sg: don't grab scsi host module reference") make
a mess how blk_get_queue() is called, blk_get_queue() returns true on
success while the caller expects it returns 0 on success.
Fix this problem and also add a corresponding error message on failure.
Fixes: fcaa174a9c ("scsi/sg: don't grab scsi host module reference")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Closes: https://lore.kernel.org/all/87lefv622n.fsf@linux.ibm.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230705024001.177585-1-yukuai1@huaweicloud.com
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Add support for Renesas versa3 clock driver(5p35023).
The clock generator provides 6 output clocks.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230705171000.85786-3-biju.das.jz@bp.renesas.com
[sboyd@kernel.org: Add newline to printk]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document Renesas versa3 clock generator(5P35023) bindings.
The 5P35023 is a VersaClock programmable clock generator and
is designed for low-power, consumer, and high-performance PCI
Express applications. The 5P35023 device is a three PLL
architecture design, and each PLL is individually programmable
and allowing for up to 6 unique frequency outputs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230705171000.85786-2-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 restart feature.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=VRCb
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-19
We've added 45 non-merge commits during the last 3 day(s) which contain
a total of 71 files changed, 7808 insertions(+), 592 deletions(-).
The main changes are:
1) multi-buffer support in AF_XDP, from Maciej Fijalkowski,
Magnus Karlsson, Tirthendu Sarkar.
2) BPF link support for tc BPF programs, from Daniel Borkmann.
3) Enable bpf_map_sum_elem_count kfunc for all program types,
from Anton Protopopov.
4) Add 'owner' field to bpf_rb_node to fix races in shared ownership,
Dave Marchevsky.
5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
bpf, net: Introduce skb_pointer_if_linear().
bpf: sync tools/ uapi header with
selftests/bpf: Add mprog API tests for BPF tcx links
selftests/bpf: Add mprog API tests for BPF tcx opts
bpftool: Extend net dump with tcx progs
libbpf: Add helper macro to clear opts structs
libbpf: Add link-based API for tcx
libbpf: Add opts-based attach/detach/query API for tcx
bpf: Add fd-based tcx multi-prog infra with link support
bpf: Add generic attach/detach/query API for multi-progs
selftests/xsk: reset NIC settings to default after running test suite
selftests/xsk: add test for too many frags
selftests/xsk: add metadata copy test for multi-buff
selftests/xsk: add invalid descriptor test for multi-buffer
selftests/xsk: add unaligned mode test for multi-buffer
selftests/xsk: add basic multi-buffer test
selftests/xsk: transmit and receive multi-buffer packets
xsk: add multi-buffer documentation
i40e: xsk: add TX multi-buffer support
ice: xsk: Tx multi-buffer support
...
====================
Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Dscx
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2023-07-19
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 55 insertions(+), 10 deletions(-).
The main changes are:
1) Fix stack depth check in presence of async callbacks,
from Kumar Kartikeya Dwivedi.
2) Fix BTI type used for freplace attached functions,
from Alexander Duyck.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, arm64: Fix BTI type used for freplace attached functions
selftests/bpf: Add more tests for check_max_stack_depth bug
bpf: Repeat check_max_stack_depth for async callbacks
bpf: Fix subprog idx logic in check_max_stack_depth
====================
Link: https://lore.kernel.org/r/20230719174502.74023-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the power supply device being registered supports a temperature
readout, the core registers a thermal zone for it. The thermal core
would register a hwmon device for that unless told otherwise.
When CONFIG_POWER_SUPPLY_HWMON is enabled, the power supply core creates
a hwmon device. This results in a second entry, one which has a better
name than the one registered through the thermal framework. It could
potentially have readouts other than temperature.
To simplify the result, tell the thermal framework to not register a
hwmon device if CONFIG_POWER_SUPPLY_HWMON is enabled. The result is
one hwmon device with all the readings the device supports.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
OX810 and OX820 clock bindings.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-2-fb6ab3dea87c@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Due to lack of maintenance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 clock driver.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230630-topic-oxnas-upstream-remove-v2-1-fb6ab3dea87c@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
Here let COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM so that it won't
be built to cause below compiling error if PCI is unset:
------
ld: drivers/clk/clk-fixed-mmio.o: in function `fixed_mmio_clk_setup':
clk-fixed-mmio.c:(.text+0x5e): undefined reference to `of_iomap'
ld: clk-fixed-mmio.c:(.text+0xba): undefined reference to `iounmap'
------
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230707135852.24292-8-bhe@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The function clk_register_pll() may return NULL or an ERR_PTR. Don't
treat an ERR_PTR as valid.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Link: https://lore.kernel.org/r/20230712102246.10348-1-duminjie@vivo.com
Fixes: b9e0d40c0d ("clk: keystone: add Keystone PLL clock driver")
[sboyd@kernel.org: Reword commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmS3jZATHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6Fo4CACVxU4+xMgAszot9Sup7psEiUjbOHKd
TCxEEm9GML/aquPbXxx3r0yztyAzd1dF9zXSFGofUyfVV/pdKbu7h1vP+/EndmiL
W9eoVhnYzAbz2TivFgqQwqqTlosEgKmZF5qGl4eloH6luOILbvrl/UuD0J70h3gK
Ixus6TyEIdI2y1ewTlWXMOriedTVeTX+DC2S02Bi42cVFdAm29nie2fCdHVGhF/o
a0KICO3HjKhTmGReSHDpCMro+r93BezmYxoM96K4a911tge7fLzYhQQ1+ZVyQ3Mw
DRHMD1ehM6cWd0GUce3LqBjb9zx9ciQK0ohqKzAIaEV+Rta84P/CHtbn
=GOLr
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.6-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-07-19
The first 2 patches are by Judith Mendez, target the m_can driver and
add hrtimer based polling support for TI AM62x SoCs, where the
interrupt of the MCU domain's m_can cores is not routed to the Cortex
A53 core.
A patch by Rob Herring converts the grcan driver to use the correct DT
include files.
Michal Simek and Srinivas Neeli add support for optional reset control
to the xilinx_can driver.
The next 2 patches are by Jimmy Assarsson and add support for new
Kvaser pciefd to the kvaser_pciefd driver.
Mao Zhu's patch for the ucan driver removes a repeated word from a
comment.
* tag 'linux-can-next-for-6.6-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ucan: Remove repeated word
can: kvaser_pciefd: Add support for new Kvaser pciefd devices
can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
can: Explicitly include correct DT includes
can: xilinx_can: Add support for controller reset
dt-bindings: can: xilinx_can: Add reset description
can: m_can: Add hrtimer to generate software interrupt
dt-bindings: net: can: Remove interrupt properties for MCAN
====================
Link: https://lore.kernel.org/r/20230719072348.525039-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Introduce a list of generic reset sources and use them to export the
power on reason through sysfs. Update the ABI documentation to describe
this new interface.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[Miquel Raynal: Follow-up on Kamel's work, 4 years later]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Don't populate the read-only array on the stack, instead make it
static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Adds a check of the FORCE_20PCT bit when getting the precharge
current value.
According to the bit description for the FORCE_20PCT bit, when
FORCE_20PCT is true, the precharge current target is 50% of
what is configured in the IPRECHG bit field.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Make it clear that this function always returns either true or false
without other planned failure modes.
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Those who have worked with RCU for some time will naturally think in
terms of the long-standing call_rcu() API rather than the much newer
call_rcu_hurry() API. But it is call_rcu_hurry() that you should normally
pass to synchronize_rcu_mult(). This commit therefore updates the header
comment to point this out.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Perf traces of network-related workload shows a measurable overhead
inside the network-related selinux hooks while zeroing the
lsm_network_audit struct.
In most cases we can delay the initialization of such structure to the
usage point, avoiding such overhead in a few cases.
Additionally, the audit code accesses the IP address information only
for AF_INET* families, and selinux_parse_skb() will fill-out the
relevant fields in such cases. When the family field is zeroed or the
initialization is followed by the mentioned parsing, the zeroing can be
limited to the sk, family and netif fields.
By factoring out the audit-data initialization to new helpers, this
patch removes some duplicate code and gives small but measurable
performance gain under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add dt-binding documentation for Versal NET platforms.
Versal Net is a new AMD/Xilinx SoC.
The SoC and its architecture is based on the Versal ACAP device.
The Versal Net device includes more security features in the
platform management controller (PMC) and increases the number of
CPUs in the application processing unit (APU) and the real-time
processing unit (RPU).
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20230620110137.5701-1-shubhrajyoti.datta@amd.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Scaling for VTT/VIN5/VIN6 registers were based on prior chips
* Split scaling factors for 6798/6799 and assign at probe()
* Pass them through driver data to sysfs functions
Tested on nct6799 with old/new input/min/max
Fixes: 0599682b82 ("hwmon: (nct6775) Add support for NCT6798D")
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230719192848.337508-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add reset definitions of AST2600 I3C and MAC controllers. In the case of
the I3C reset, since there is no reset-line hardware available for
`ASPEED_RESET_I3C_DMA`, a new macro `ASPEED_RESET_I3C` with the same ID
is introduced to provide a more accurate representation of the hardware.
The old macro `ASPEED_RESET_I3C_DMA` is kept to provide backward
compatibility.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Link: https://lore.kernel.org/r/20230718062616.2822339-1-dylan_hung@aspeedtech.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The "hisilicon,hix5hd2-clock" is simple enough to just add it into its
parent node binding, "hisilicon,cpuctrl".
This fixes a warning that "hisilicon,hix5hd2-clock" is missing a schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230707210700.869060-1-robh@kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This reverts commit 860690a93e.
On the MT8183, the SSPM related clocks were removed claiming a lack of
usage. This however causes some issues when the driver was converted to
the new simple-probe mechanism. This mechanism allocates enough space
for all the clocks defined in the clock driver, not the highest index
in the DT binding. This leads to out-of-bound writes if their are holes
in the DT binding or the driver (due to deprecated or unimplemented
clocks). These errors can go unnoticed and cause memory corruption,
leading to crashes in unrelated areas, or nothing at all. KASAN will
detect them.
Add the SSPM related clocks back to the MT8183 clock driver to fully
implement the DT binding. The SSPM clocks are for the power management
co-processor, and should never be turned off. They are marked as such.
Fixes: 3f37ba7cc3 ("clk: mediatek: mt8183: Convert all remaining clocks to common probe")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230719074251.1219089-1-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the System-Top-Group, Image-Signal-Process, Video-Output
and PLL clocks on the JH7110 SoC. These drivers come with their
associate dt-bindings & the obligatory headers containing defines of
clock indices.
To maintain backwards compatibility, the PLL driver will fall back to
using the fixed factor clocks that were merged for v6.4. The binding has
been updated to only permit sourcing the PLL clocks from the PLL's clock
controller.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZLgaPQAKCRB4tDGHoIJi
0pGIAQC7qIcmFpOJcQkaTVAcKDMhoz9RNQbleMKpFdvrkO0S5gEAjrV0eXNr2eDB
A1K6FKyMMMPTZBcVeAdXc+aPzl8SSAg=
=l9SH
-----END PGP SIGNATURE-----
Merge tag 'clk-starfive-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into clk-starfive
Pull StarFive clk driver updates from Conor Dooley:
Add support for the System-Top-Group, Image-Signal-Process, Video-Output
and PLL clocks on the JH7110 SoC. These drivers come with their
associate dt-bindings & the obligatory headers containing defines of
clock indices.
To maintain backwards compatibility, the PLL driver will fall back to
using the fixed factor clocks that were merged for v6.4. The binding has
been updated to only permit sourcing the PLL clocks from the PLL's clock
controller.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'clk-starfive-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
clk: starfive: Add StarFive JH7110 Video-Output clock driver
clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver
clk: starfive: Add StarFive JH7110 System-Top-Group clock driver
clk: starfive: jh7110-sys: Add PLL clocks source from DTS
clk: starfive: Add StarFive JH7110 PLL clock driver
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs
dt-bindings: soc: starfive: Add StarFive syscon module
dt-bindings: clock: Add StarFive JH7110 PLL clock generator
The property "altr,modrst-offset" is only applicable to arm32 SoCFPGA
platforms, thus it not required for all platforms.
While at it, update my email address.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230719132749.661914-1-dinguyen@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This reverts commit 2f3d08f074 ("intel_idle: Add support for using
intel_idle in a VM guest using just hlt"), because it causes functional
issues to appear and it is not really useful without a related commit
that got reverted previously.
Link: https://lore.kernel.org/linux-pm/5c7de6d5-7706-c4a5-7c41-146db1269aff@intel.com
Reported-by: Xiaoyao Li <xiaoyao.li@intel.com>
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
