In order to handle the Audio Accessory mode, refactor the mux
and switch setup in a single function.
The refactor will help add new states and make the process
simpler to understand.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-2-15a92565146b@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for calling typec_set_mode() for the DEBUG, AUDIO
accessory modes.
Let's also call typec_set_mode() for USB as default and SAFE
when partner is disconnected.
The USB state is only called when ALT mode is specifically
not specified by the partner status flags in order
to leave the altmode handlers setup the proper mode to
switches, muxes and retimers.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-1-15a92565146b@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes following Thunderbolt/USB4 changes for the v6.5 merge
window:
- Improve debug logging
- Rework for TMU and CL states handling
- Retimer access improvements
- Initial support for USB4 v2 features:
* 80G symmetric link support
* New notifications
* PCIe extended encapsulation
* enhanced uni-directional TMU mode
* CL2 link low power state
* DisplayPort 2.x tunneling
- Support for Intel Barlow Ridge Thunderbolt/USB4 controller
- Minor fixes and improvements.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=DaGL
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.5 merge window
This includes following Thunderbolt/USB4 changes for the v6.5 merge
window:
- Improve debug logging
- Rework for TMU and CL states handling
- Retimer access improvements
- Initial support for USB4 v2 features:
* 80G symmetric link support
* New notifications
* PCIe extended encapsulation
* enhanced uni-directional TMU mode
* CL2 link low power state
* DisplayPort 2.x tunneling
- Support for Intel Barlow Ridge Thunderbolt/USB4 controller
- Minor fixes and improvements.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (55 commits)
thunderbolt: Add test case for 3 DisplayPort tunnels
thunderbolt: Add DisplayPort 2.x tunneling support
thunderbolt: Make bandwidth allocation mode function names consistent
thunderbolt: Enable CL2 low power state
thunderbolt: Add support for enhanced uni-directional TMU mode
thunderbolt: Increase NVM_MAX_SIZE to support Intel Barlow Ridge controller
thunderbolt: Move constants related to NVM into nvm.c
thunderbolt: Limit Intel Barlow Ridge USB3 bandwidth
thunderbolt: Add Intel Barlow Ridge PCI ID
thunderbolt: Fix PCIe adapter capability length for USB4 v2 routers
thunderbolt: Fix DisplayPort IN adapter capability length for USB4 v2 routers
thunderbolt: Add two additional double words for adapters TMU for USB4 v2 routers
thunderbolt: Enable USB4 v2 PCIe TLP/DLLP extended encapsulation
thunderbolt: Announce USB4 v2 connection manager support
thunderbolt: Reset USB4 v2 host router
thunderbolt: Add the new USB4 v2 notification types
thunderbolt: Add support for USB4 v2 80 Gb/s link
thunderbolt: Identify USB4 v2 routers
thunderbolt: Do not touch lane 1 adapter path config space
thunderbolt: Ignore data CRC mismatch for USB4 routers
...
'data' are only read (passed down to audit_log_n_hex()), so they can be
const -- the same what is expected in audit_log_n_hex(). Only a minor
cleanup to be consistent.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both tty_audit_add_data() and tty_audit_tiocsti() need only to read from
the tty struct, so make the tty parameters of them both const. This
aids the compiler a bit.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use bool for tty_audit_buf::icanon in favor of ugly bitfields. And get
rid of "!!" as that is completely unnecessary.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we cannot obtain an audit buffer in tty_audit_log(), simply return
from the function. Apart this is mostly preferred in the kernel, it
allows to merge the split audit string while still keeping it readable.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty_audit_buf_alloc() manually erases most of the entries after
kmalloc(). So use kzalloc() and remove the manual sets to zero.
That way, we are sure that we do not omit anything.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230621101611.10580-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit eb26dfe8aa.
Commit eb26dfe8aa ("8250: add support for ASIX devices with a FIFO
bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX
(0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in
1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged
on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always
takes precedence over the ASIX entry even since it was initially
merged, code in that commit is always unreachable.
In my tests, adding the FIFO workaround to pci_netmos_init() makes no
difference, and the vendor driver also does not have such workaround.
Given that the code was never used for over a decade, it's safe to
revert it.
Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on
their newer AX99100 PCIe serial controllers released on 2016. The FIFO
workaround should not be intended for these newer controllers, and it
was never implemented in vendor driver.
Fixes: eb26dfe8aa ("8250: add support for ASIX devices with a FIFO bug")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The atmel_complete_tx_dma() function disables IRQs at the start
of the function by calling spin_lock_irqsave(&port->lock, flags);
There is no need to disable them a second time using the
spin_lock_irq() function and, in fact, doing so is a bug because
it will enable IRQs prematurely when we call spin_unlock_irq().
Just use spin_lock/unlock() instead without disabling or enabling
IRQs.
Fixes: 08f738be88 ("serial: at91: add tx dma support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hidraw_open() function increments the hidraw device reference
counter. The counter has no dedicated synchronization mechanism,
resulting in a potential data race when concurrently opening a device.
The race is a regression introduced by commit 8590222e4b ("HID:
hidraw: Replace hidraw device table mutex with a rwsem"). While
minors_rwsem is intended to protect the hidraw_table itself, by instead
acquiring the lock for writing, the reference counter is also protected.
This is symmetrical to hidraw_release().
Link: https://github.com/systemd/systemd/issues/27947
Fixes: 8590222e4b ("HID: hidraw: Replace hidraw device table mutex with a rwsem")
Cc: stable@vger.kernel.org
Signed-off-by: Ludvig Michaelsson <ludvig.michaelsson@yubico.com>
Link: https://lore.kernel.org/r/20230621-hidraw-race-v1-1-a58e6ac69bab@yubico.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Remove the unnecessary #address-cells and #size-cells nodes from
the fan-controller. These are not needed as the fan controller does not
have any children.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230612162444.3936302-1-tharvey@gateworks.com
Signed-off-by: Lee Jones <lee@kernel.org>
When patching kernel alternatives, we need to be careful not to execute
kernel code which is itself subject to patching. In general, if code is
executed after the instructions in memory have been patched but prior to
the cache maintenance and barriers completing, it could lead to
UNPREDICTABLE results.
As our regular cache maintenance routines are patched with alternatives,
we have a clean_dcache_range_nopatch() function which is *intended* to
avoid patchable code and therefore supposed to be safe in the middle of
patching alternatives. Unfortunately, it's not marked as 'noinstr', and
so can be instrumented with patchable code.
Additionally, it calls read_sanitised_ftr_reg() (which may be
instrumented with patchable code) to find the sanitized value of
CTR_EL0.DminLine, and is therefore not safe to call during patching.
Luckily, since commit:
675b0563d6 ("arm64: cpufeature: expose arm64_ftr_reg struct for CTR_EL0")
... we can read the sanitised CTR_EL0 value directly, and avoid the call
to read_sanitised_ftr_reg().
This patch marks clean_dcache_range_nopatch() as noinstr, and has it
read the sanitized CTR_EL0 value directly, avoiding the issues above.
As a bonus, this is also an optimization. As read_sanitised_ftr_reg()
performs a binary search to find the CTR_EL0 value, reading the value
directly avoids this binary search per applied alternative, avoiding
some unnecessary work.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230616103150.1238132-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 documentation has moved under Documentation/arch/. Fix up a
dangling reference to match.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The arm64 documentation has moved under Documentation/arch/. Fix up a
reference in mm/mremap.c to match.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The arm64 documentation has moved under Documentation/arch/; fix up
references in the arm64 subtree to match.
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The arm64 documentation has move under Documentation/arch/ fix a reference
to match.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/arm64 into arch/ (along with the Chinese equvalent
translations) and fix up documentation references.
Cc: Will Deacon <will@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <src.res@email.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Yantengsi <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Of these four extensions, two were part of the base ISA when the port was
written and are required by the kernel. The other two are implied when
`i` is in riscv,isa on DT systems.
There's not much that userspace can do with this extra information, but
there is no harm in reporting an ISA string that closer resembles the
current versions of the specifications either.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230607-nest-collision-5796b6be8be6@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Similar to commit 41ebfc91f7 ("dt-bindings: riscv: explicitly mention
assumption of Zicsr & Zifencei support"), the Zicntr and Zihpm
extensions also used to be part of the base ISA but were removed after
the bindings were merged. Document the assumption of their presence in
the base ISA.
Suggested-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230607-rerun-retinal-5e8ba89e98f1@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While expanding on the comments in the ISA string parsing code, I
noticed that the conditional decrement of `isa` at the end of the loop
was a bit odd.
The parsing code expects that at the start of the for loop, `isa` will
point to the first character of the next unparsed extension.
However, depending on what the next extension is, this may not be true.
Unless the next extension is a multi-letter extension preceded by an
underscore, `isa` will either point to the string's null-terminator or
to the first character of the next extension, once the switch statement
has been evaluated.
Obviously incrementing `isa` at the end of the loop could cause it to
increment past the null terminator or miss a single letter extension, so
`isa` is conditionally decremented, just so that the loop can increment
it again.
It's easier to understand the code if, instead of this decrement +
increment dance, we instead use a while loop & rely on the handling of
individual extension types to leave `isa` pointing to the first
character of the next extension.
As already mentioned, this won't be the case where the following
extension is multi-letter & preceded by an underscore. To handle that,
invert the check and increment rather than decrement.
Hopefully this eliminates a "huh?!?" moment the next time somebody tries
to understand this code.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-estate-left-f20faabefb89@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I have found these comments to not be at all helpful whenever I look at
the parser. Further, the comments in the default case (single letter
parser) are not quite right either.
Group the comments into a larger one at the start of each case, that
attempts to explain things at a higher level.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230607-headpiece-tannery-83ed5cc4856a@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Since riscv_fill_hwcap() now only iterates over possible cpus, the
basic validation of whether riscv,isa contains "rv<width>" can be moved
to riscv_early_of_processor_hartid().
Further, "ima" support is required by the kernel, so reject any CPU not
fitting the bill.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-guts-blurry-67e711acf328@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some back and forth with Drew [1] about riscv_fill_hwcap() resulted in
the realisation that it is not very useful to parse the DT & perform
validation of riscv,isa every time we would like to get the id for a
hart.
Although it is no longer called in riscv_fill_hwcap(),
riscv_of_processor_hartid() is called in several other places.
Notably in setup_smp() it forms part of the logic for filling the mask
of possible CPUs. Since a possible CPU must have passed this basic
validation of riscv,isa, a repeat validation is not required.
Rename riscv_of_processor_id() to riscv_early_of_processor_id(),
which will be called from setup_smp() & introduce a new
riscv_of_processor_id() which makes use of the pre-populated mask of
possible cpus.
Link: https://lore.kernel.org/linux-riscv/xvdswl3iyikwvamny7ikrxo2ncuixshtg3f6uucjahpe3xpc5c@ud4cz4fkg5dj/ [1]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-glade-pastel-d8cbd9d9f3c6@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Saving off the `isa` pointer to a temp variable, followed by checking if
it has been incremented is a bit of an odd pattern. Perhaps it was done
to avoid a funky looking if statement mixed with the ifdeffery.
Now that we use IS_ENABLED() here just return from the parser as soon as
we detect a mismatch between the string and the currently running
kernel.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-splatter-bacterium-a75bb9f0d0b7@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently for each timestamp frame, the SW needs to go and read the
received timestamp over the MDIO bus. But the HW has the capability
to store the received nanoseconds part and the least significant two
bits of the seconds in the reserved field of the PTP header. In this
way we could save few MDIO transactions (actually a little more
transactions because the access to the PTP registers are indirect)
for each received frame.
Instead of reading the rest of seconds part of the timestamp of the
frame using MDIO transactions schedule PTP worker thread to read the
seconds part every 500ms and then for each of the received frames use
this information. Because if for example running with 512 frames per
second, there is no point to read 512 times the second part.
Doing all these changes will give a great CPU usage performance.
Running ptp4l with logSyncInterval of -9 will give a ~60% CPU
improvement.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to move Arm .dts files into sub-directories grouped
by vendor/family, the current flat tree of DTBs generated by
dtbs_install needs to be maintained. Moving the installed DTBs to
sub-directories would break various consumers using 'make dtbs_install'.
This is a NOP until sub-directories are introduced.
Signed-off-by: Rob Herring <robh@kernel.org>
Comparing .dts files to built .dtb files yielded a few .dts files which
are never built. Add them to the build.
Signed-off-by: Rob Herring <robh@kernel.org>
In preparation to move .dts files into subdirectories, include
sunxi-h3-h5-emlid-neutis.dtsi from the current directory rather than the
symlinked include path.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
In case of real io scheduler, q->elevator is set, so blk_mq_run_hw_queue()
may just check if scheduler queue has request to dispatch, see
__blk_mq_sched_dispatch_requests(). Then IO hang may be caused because
all passthorugh requests may stay in sw queue.
And any passthrough request should have been inserted to hctx->dispatch
always.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: d97217e7f0 ("blk-mq: don't queue plugged passthrough requests into scheduler")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230621132208.1142318-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the driver core allows for struct class to be in read-only
memory, move the bsg_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-scsi@vger.kernel.org
Cc: linux-block@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230620180129.645646-8-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the driver core allows for struct class to be in read-only
memory, move the ublk_chr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230620180129.645646-7-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the driver core allows for struct class to be in read-only
memory, move the aoe_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Justin Sanders <justin@coraid.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230620180129.645646-6-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230620180129.645646-5-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
FMODE_EXEC has nothing to do with exclusive opens, and even is of
the wrong type. We need to check for BLK_OPEN_EXCL here.
Fixes: 985958b858 ("block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230621124914.185992-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than assign the user pointer to msghdr->msg_control, assign it
to msghdr->msg_control_user to make sparse happy. They are in a union
so the end result is the same, but let's avoid new sparse warnings and
squash this one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306210654.mDMcyMuB-lkp@intel.com/
Fixes: cac9e4418f ("io_uring/net: save msghdr->msg_control for retries")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We cannot sanely handle partial retries for recvmsg if we have cmsg
attached. If we don't, then we'd just be overwriting the initial cmsg
header on retries. Alternatively we could increment and handle this
appropriately, but it doesn't seem worth the complication.
Move the MSG_WAITALL check into the non-multishot case while at it,
since MSG_WAITALL is explicitly disabled for multishot anyway.
Link: https://lore.kernel.org/io-uring/0b0d4411-c8fd-4272-770b-e030af6919a0@kernel.dk/
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we have cmsg attached AND we transferred partial data at least, clear
msg_controllen on retry so we don't attempt to send that again.
Cc: stable@vger.kernel.org # 5.10+
Fixes: cac9e4418f ("io_uring/net: save msghdr->msg_control for retries")
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix kernel-doc warnings in device_cgroup:
security/device_cgroup.c:835: warning: Excess function parameter
'dev_cgroup' description in 'devcgroup_legacy_check_permission'.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A fix for a typoed iterator in the Intel Soundwire driver, fairly simple
on inspection though not reviewed by Intel.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmSS9eUACgkQJNaLcl1U
h9AUrgf8DzxOtaTaxzWGlVhoky6KxmYXXLANFOM1iDvGghoxEiYRCjn79El5+MuL
YfmgOzUX1ls1T9eZFzUqhAmavjfYbQw7bK90nuK2iNklxswhFbvwJdb0X854eFza
wLZEXhDnw9uyuCeenhC/JICxz5JvRnscmQ+rMy0SZQhKWeQ5QUdy2oa1o6dEpLd7
uaqZirgaaa2jWikj/6KwO7/sEaE7UznZfwdMbijwwwURXMty1+9Zo5V8+sctYbjI
oMHhiTbgAPbgfKN6k7MntGwWXBM7CXpAuzz6SOwdrOQmKaE5ODAAG1PnAWMkR2DQ
T0rlCos56Xrom2lseAQoX/97OKCJWA==
=dj3R
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.4-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix for v6.4
A fix for a typoed iterator in the Intel Soundwire driver, fairly simple
on inspection though not reviewed by Intel.
Currently the FE is spinning way too fast when polling for new work in
the FE idleloop. As each poll fetches 16 bytes from memory, a GPU running
at 1GHz with the current setting of 200 wait cycle between fetches causes
80 MB/s of memory traffic just to check for new work when the GPU is
otherwise idle, which is more FE traffic than in some GPU loaded cases.
Significantly increase the number of wait cycles to slow down the poll
interval to ~30µs, limiting the FE idle memory traffic to 512 KB/s, while
providing a max latency which should not hurt most use-cases. The FE WAIT
command seems to have some unknown discrete steps in the wait cycles so
we may over/undershoot the target a bit, but that should be harmless.
If the GPU core base frequency is unknown keep the 200 wait cycles as
a sane default.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
The Rockchip I2S TDM driver and the Everest Semi ES8316 codec are used
to provide analog audio support on the RK3588 SoC based Rock 5B board.
Enable both of them as modules.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update the defconfig for the new RK8XX MFD config name,
which got split to add SPI support.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: c20e8c5b12 ("mfd: rk808: Split into core and i2c")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MFD_RK808 got split into an I2C and SPI part named MFD_RK8XX_I2C and
MFD_RK8XX_SPI. Since there are no known ARMv7 boards using the SPI
connected RK8XX chips (which are new), it is enough to just enable
the I2C option.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: c20e8c5b12 ("mfd: rk808: Split into core and i2c")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
