The data structure adf_fw_config is used to select which firmware image
is loaded on a certain set of accelerator engines.
When support for 402xx was added, the adf_fw_config arrays were
duplicated in order to select different firmware images.
Since the configurations are the same regardless of the QAT GEN4
flavour, in preparation for adding support for multiple configurations,
refactor the logic that retrieves the firmware names in the 4xxx driver.
The structure adf_fw_config has been changed to contain a firmware object
id that is then mapped to a firmware name depending of the device type.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update fw image names to be constant throughout the driver.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make use of the default statements by changing the pattern:
switch(condition) {
case COND_A:
...
break;
case COND_b:
...
break;
}
return ret;
in
switch(condition) {
case COND_A:
...
break;
case COND_b:
...
break;
default:
return ret;
}
Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The following checkpatch warning has been fixed:
- WARNING: Missing a blank line after declarations
Signed-off-by: Franziska Naepelt <franziska.naepelt@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callback function for RSA frees the memory allocated for the source
and destination buffers before unmapping them.
This sequence is wrong.
Change the cleanup sequence to unmap the buffers before freeing them.
Fixes: 3dfaf0071e ("crypto: qat - remove dma_free_coherent() for RSA")
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The callback function for DH frees the memory allocated for the
destination buffer before unmapping it.
This sequence is wrong.
Change the cleanup sequence to unmap the buffer before freeing it.
Fixes: 029aa4624a ("crypto: qat - remove dma_free_coherent() for DH")
Signed-off-by: Hareshx Sankar Raj <hareshx.sankar.raj@intel.com>
Co-developed-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Signed-off-by: Bolemx Sivanagaleela <bolemx.sivanagaleela@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Boot hangs on EspressoBIN Ultra (Armada 3720) after a message that device
vcc_sd1 had been disabled. The device manufacturer patched this issue in
their kernel fork noting that vcc_sd1 is used by the EspressoBIN model
but not the EspressoBIN Ultra. Removing the device from the tree fixes
the boot hang and wifi.
Signed-off-by: Ben Schneider <ben@bens.haus>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
"make dtbs_check":
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The debug print parameters were swapped in the output and they were
printed as decimal values, both the hardware address and the value.
Update the debug print to print the parameters in correct order, and
use hexadecimal print for both address and value.
Fixes: f38b7cca6d ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615152817.359420-1-marex@denx.de
The hierarchy of PCH PIC, PCH PCI MSI and EIONTC is as following:
PCH PIC ------->|
|---->EIOINTC
PCH PCI MSI --->|
so the irq_data list of irq_desc for IRQs on PCH PIC and PCH PCI MSI
is like this:
irq_desc->irq_data(domain: PCH PIC)->parent_data(domain: EIOINTC)
irq_desc->irq_data(domain: PCH PCI MSI)->parent_data(domain: EIOINTC)
In eiointc_resume(), the irq_data passed into eiointc_set_irq_affinity()
should be matched to EIOINTC domain instead of PCH PIC or PCH PCI MSI
domain, so fix it.
Fixes: a90335c2df ("irqchip/loongson-eiointc: Add suspend/resume support")
Reported-by: yangqiming <yangqiming@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-6-lvjianmin@loongson.cn
LIOINTC doesn't require specific logic to work with wakeup IRQs,
and no irq_set_wake callback is needed. To allow registered IRQs
from LIOINTC to be used as a wakeup-source, and ensure irq_set_irq_wake()
works well, the flag IRQCHIP_SKIP_SET_WAKE should be added.
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-5-lvjianmin@loongson.cn
For the INT_POLARITY register of Loongson-2K series IRQ
controller, '0' indicates high level or rising edge triggered,
'1' indicates low level or falling edge triggered, and we
can find out the information from the Loongson 2K1000LA User
Manual v1.0, Table 9-2, Section 9.3 (中断寄存器描述 / Description
of the Interrupt Registers).
For Loongson-3 CPU series, setting INT_POLARITY register is not
supported and writting it has no effect.
So trigger polarity setting shouled be fixed for Loongson-2K CPU
series.
Fixes: 17343d0b40 ("irqchip/loongson-liointc: Support to set IRQ type for ACPI path")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-4-lvjianmin@loongson.cn
In DeviceTree path, when ht_vec_base is not zero, the hwirq of PCH PIC
will be assigned incorrectly. Because when pch_pic_domain_translate()
adds the ht_vec_base to hwirq, the hwirq does not have the ht_vec_base
subtracted when calling irq_domain_set_info().
The ht_vec_base is designed for the parent irq chip/domain of the PCH PIC.
It seems not proper to deal this in callbacks of the PCH PIC domain and
let's put this back like the initial commit ef8c01eb64 ("irqchip: Add
Loongson PCH PIC controller").
Fixes: bcdd75c596 ("irqchip/loongson-pch-pic: Add ACPI init support")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-3-lvjianmin@loongson.cn
In an ACPI-based dual-bridge system, IRQ of each bridge's
PCH PIC sent to CPU is always a zero-based number, which
means that the IRQ on PCH PIC of each bridge is mapped into
vector range from 0 to 63 of upstream irqchip(e.g. EIOINTC).
EIOINTC N: [0 ... 63 | 64 ... 255]
-------- ----------
^ ^
| |
PCH PIC N |
PCH MSI N
For example, the IRQ vector number of sata controller on
PCH PIC of each bridge is 16, which is sent to upstream
irqchip of EIOINTC when an interrupt occurs, which will set
bit 16 of EIOINTC. Since hwirq of 16 on EIOINTC has been
mapped to a irq_desc for sata controller during hierarchy
irq allocation, the related mapped IRQ will be found through
irq_resolve_mapping() in the IRQ domain of EIOINTC.
So, the IRQ number set in HT vector register should be fixed
to be a zero-based number.
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: liuyun <liuyun@loongson.cn>
Signed-off-by: liuyun <liuyun@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-2-lvjianmin@loongson.cn
With W=1:
drivers/regulator/helpers.c:947: warning: Function parameter or member 'ramp_delay' not described in 'regulator_set_ramp_delay_regmap'
Fix it by documenting the parameter.
Fixes: fb8fee9efd ("regulator: Add regmap helper for ramp-delay setting")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1686881298-28333-1-git-send-email-cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have some drivers that have a use case for cached write only
registers, doing read/modify/writes on read only registers in order to
work more easily with bitfields. Go back to trying the cache before we
check if we can read from the device.
Fixes: eab5abdeb7 ("regmap: Check for register readability before checking cache during read")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230615-regmap-drop-early-readability-v1-1-8135094362de@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DIV_ROUND_CLOSEST() does not work on 64-bit variables when building for
a 32-bit target:
ld.lld: error: undefined symbol: __udivdi3
>>> referenced by loongson_i2s.c
>>> sound/soc/loongson/loongson_i2s.o:(loongson_i2s_hw_params) in archive vmlinux.a
Use DIV_ROUND_CLOSEST_ULL() instead.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090156.2347850-4-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The new driver fails to build when PCI is disabled:
WARNING: unmet direct dependencies detected for SND_SOC_LOONGSON_I2S_PCI
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (LOONGARCH || COMPILE_TEST [=y]) && PCI [=n]
Selected by [y]:
- SND_SOC_LOONGSON_CARD [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (LOONGARCH || COMPILE_TEST [=y])
sound/soc/loongson/loongson_i2s_pci.c:167:1: error: type specifier missing, defaults to 'int'; ISO C99 and later do not support implicit int [-Wimplicit-int]
module_pci_driver(loongson_i2s_driver);
Add the appropriate Kconfig dependency.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090156.2347850-3-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Build testing without CONFIG_PM_SLEEP causes a warning:
sound/soc/loongson/loongson_i2s.c:246:12: error: unused function 'i2s_suspend' [-Werror,-Wunused-function]
sound/soc/loongson/loongson_i2s.c:255:12: error: unused function 'i2s_resume' [-Werror,-Wunused-function]
Use the modern SYSTEM_SLEEP_PM_OPS() instead of the old one to avoid this.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090156.2347850-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM functions are never referenced when CONFIG_PM_SLEEP is
disabled:
sound/soc/codecs/max98388.c:854:12: error: unused function 'max98388_suspend' [-Werror,-Wunused-function]
static int max98388_suspend(struct device *dev)
^
sound/soc/codecs/max98388.c:864:12: error: unused function 'max98388_resume' [-Werror,-Wunused-function]
static int max98388_resume(struct device *dev)
Fix this by using the modern SYSTEM_SLEEP_PM_OPS() macro in place of
the deprecated SET_SYSTEM_SLEEP_PM_OPS() version, and use pm_sleep_ptr()
to hide the entire structure as well.
On a related note, the of_match_ptr() and ACPI_PTR() macros have the same
problem and would cause the device id table to be unused when the driver
is built-in and the respective subsystems are disabled. This does not
cause warnings unless -Wunused-const-variable is passed to the compiler,
but it's better to just not use the macros at all here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090156.2347850-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the node names for the SPI NOR and NAND partitions to conform to
the partition properties in the relevant dtschema.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Marvell NAND controller has now YAML to validate it's DT bindings, so
change the node name of cp11x DTSI as it is required by
nand-controller.yaml
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Set primary core mask and refcount.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Over time the function has changed and now there is no need to have the
duplicated sof_fw_trace_suspend() and sof_suspend_clients() in the
if (target_state == SOF_DSP_PM_D0) branch.
Remove it and add a simple check with a single goto statement.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <olarupaulstelian97@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SOF_DBG_DUMP_IPC_MESSAGE_PAYLOAD flag to print the message payload
instead of the DEBUG_VERBOSE, which would need code modification and kernel
re-compilation.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dump the IPC message payload if BIT(11) of sof_debug is set and the message
contains more data than just a header.
The header size differs between TX and RX and in case of set_get_data, the
header is always the reply header for the message regardless if it is TX
or RX.
The use of printk(KERN_DEBUG "..."); is on purpose to keep the dmesg output
tidy.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We only print out the header information of an IPC message in debug level,
either in verbose or non verbose way (Kconfig option).
On top of the header information the message itself can help reproducing
and identifying issues.
BIT(11) can be used to request a message payload dump if it is supported
by the IPC implementation.
Since IPC message payload printing is only implemented for IPC4, the flag
will not have any effect to IPC3 for now.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The shutdown is called on reboot/shutdown of the machine.
At this point the firmware tracing cannot be used anymore but in case of
IPC3 it is using and keeping a DMA channel active (dtrace).
For Tiger Lake platforms we have a quirk in place to fix rare reboot issues
when a DMA was active before rebooting the system.
If the tracing is enabled this quirk will be always used and a print
appears on the kernel log which might be misleading or not even correct.
Release the fw tracing before executing the shutdown to make sure that this
known DMA user is cleared away.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Virtual widgets are added for the purpose of showing connections between
aggregated DAIs in SDW topologies. However, we shouldn't touch them in
SOF.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Testing virtual widget is required in many functions. No function
changed in this commit.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A new function is added on HiSilicon uncore UC PMU.
The UC PMU support to filter statistical information based on
the specified tx request uring channel. Make user configuration
through "uring_channel" parameter.
Document them to provide guidance on how to use them.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonthan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230615125926.29832-4-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
On HiSilicon Hip09 platform, there are 4 UC (unified cache) modules
on each chip CCL (CPU Cluster). UC is a cache that provides
coherence between NUMA and UMA domains. It is located between L2
and Memory System. Many PMU events are supported. Let's support
the UC PMU driver using the HiSilicon uncore PMU framework.
* rd_req_en : rd_req_en is the abbreviation of read request tracetag
enable and allows user to count only read operations. Details are listed
in the hisi-pmu document at Documentation/admin-guide/perf/hisi-pmu.rst
* srcid_en & srcid: Allows users to filter statistical information based
on specific CPU/ICL by srcid.
srcid_en depends on rd_req_en being enabled.
* uring_channel: Allows users to filter statistical information based on
the specified tx request uring channel.
uring_channel only supported events: [0x47 ~ 0x59].
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230615125926.29832-3-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Compared to the original PA device, H60PA offers higher bandwidth.
The H60PA is a new device and we use HID to differentiate them.
The events supported by PAv3 and PAv2 are different. The PAv3 PMU
removed some events which are supported by PAv2 PMU. The older PA
PMU driver will probe v3 as v2. Therefore PA events displayed by
"perf list" cannot work properly. We add the HISI0275 HID for PAv3
PMU to distinguish different.
For each H60PA PMU, except for the overflow interrupt register, other
functions of the H60PA PMU are the same as the original PA PMU module.
It has 8-programable counters and each counter is free-running.
Interrupt is supported to handle counter (64-bits) overflow.
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230615125926.29832-2-hejunhao3@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
* irq/lpi-resend:
: .
: Patch series from James Gowans, working around an issue with
: GICv3 LPIs that can fire concurrently on multiple CPUs.
: .
irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
genirq: Allow fasteoi handler to resend interrupts on concurrent handling
genirq: Expand doc for PENDING and REPLAY flags
genirq: Use BIT() for the IRQD_* state flags
Signed-off-by: Marc Zyngier <maz@kernel.org>
GICv3 LPIs are impacted by an architectural design issue: they do not
have a global active state and as such a given LPI can be delivered to
a new CPU after an affinity change while the previous instance of the
same LPI handler has not yet completed on the original CPU.
If LPIs had an active state, this second LPI would not be delivered
until the first CPU deactivated the initial LPI, just like SPIs.
To solve this issue, use the newly introduced IRQD_RESEND_WHEN_IN_PROGRESS
flag, ensuring that we do not lose an LPI being delivered during that window
by getting the GIC to resend it.
This workaround gets enabled for all LPIs, including the VPE doorbells.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: KarimAllah Raslan <karahmed@amazon.com>
Cc: Yipeng Zou <zouyipeng@huawei.com>
Cc: Zhang Jianhua <chris.zjh@huawei.com>
[maz: massaged commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230608120021.3273400-4-jgowans@amazon.com
There is a class of interrupt controllers out there that, once they
have signalled a given interrupt number, will still signal incoming
instances of the *same* interrupt despite the original interrupt
not having been EOIed yet.
As long as the new interrupt reaches the *same* CPU, nothing bad
happens, as that CPU still has its interrupts globally disabled,
and we will only take the new interrupt once the interrupt has
been EOIed.
However, things become more "interesting" if an affinity change comes
in while the interrupt is being handled. More specifically, while
the per-irq lock is being dropped. This results in the affinity change
taking place immediately. At this point, there is nothing that prevents
the interrupt from firing on the new target CPU. We end-up with the
interrupt running concurrently on two CPUs, which isn't a good thing.
And that's where things become worse: the new CPU notices that the
interrupt handling is in progress (irq_may_run() return false), and
*drops the interrupt on the floor*.
The whole race looks like this:
CPU 0 | CPU 1
-----------------------------|-----------------------------
interrupt start |
handle_fasteoi_irq | set_affinity(CPU 1)
handler |
... | interrupt start
... | handle_fasteoi_irq -> early out
handle_fasteoi_irq return | interrupt end
interrupt end |
If the interrupt was an edge, too bad. The interrupt is lost, and
the system will eventually die one way or another. Not great.
A way to avoid this situation is to detect this problem at the point
we handle the interrupt on the new target. Instead of dropping the
interrupt, use the resend mechanism to force it to be replayed.
Also, in order to limit the impact of this workaround to the pathetic
architectures that require it, gate it behind a new irq flag aptly
named IRQD_RESEND_WHEN_IN_PROGRESS.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: KarimAllah Raslan <karahmed@amazon.com>
Cc: Yipeng Zou <zouyipeng@huawei.com>
Cc: Zhang Jianhua <chris.zjh@huawei.com>
[maz: reworded commit mesage]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230608120021.3273400-3-jgowans@amazon.com
Adding a bit more info about what the flags are used for may help future
code readers.
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230608120021.3273400-2-jgowans@amazon.com
As we're about to use the last bit available in the IRQD_* state
flags, rewrite these flags with BIT(), which ensures that these
constant do not represent a signed value.
Signed-off-by: Marc Zyngier <maz@kernel.org>
During IRQ conversion we have lost the PP_DONE interrupts for sc7280
platform. This was left unnoticed, because this interrupt is only used
for CMD outputs and probably no sc7[12]80 systems use DSI CMD panels.
Fixes: 667e9985ee ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Patchwork: https://patchwork.freedesktop.org/patch/542175/
Link: https://lore.kernel.org/r/20230613001004.3426676-2-dmitry.baryshkov@linaro.org
Expose a sysfs identifier encapsulating the CMN part number and revision
so that jevents can narrow down a fundamental set of possible events for
calculating metrics. Configuration-dependent aspects - such as whether a
given node type is present, and/or a given node ID is valid - are still
not covered, and in general it's hard to see how userspace could handle
them, so we won't be removing any data or validation logic from the
driver any time soon, but at least it's a step in a useful direction.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Tested-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Link: https://lore.kernel.org/r/b8a14c14fcdf028939ebf57849863e8ae01743de.1686588640.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
CMN implements a set of CoreSight-format peripheral ID registers which
in principle we should be able to use to identify the hardware. However
so far we have avoided trying to use the part number field since the
TRMs have all described it as "configuration dependent". It turns out,
though, that this is a quirk of the documentation generation process,
and in fact the part number should always be a stable well-defined field
which we can trust.
To that end, revamp our model detection to rely less on ACPI/DT, and
pave the way towards further using the hardware information as an
identifier for userspace jevent metrics. This includes renaming the
revision constants to maximise readability.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/3c791eaae814b0126f9adbd5419bfb4a600dade7.1686588640.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
GCC 12.2 with W=1 warns:
drivers/net/wireless/legacy/ray_cs.c:630:17: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
The driver uses SSID as a string which is just wrong, it should be treated as a
byte array instead. But as the driver is ancient and most likely there are no
users so convert it to use strscpy(). This makes sure that the string is
NUL-terminated and also the warning is fixed.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613140918.389690-5-kvalo@kernel.org
With GCC 13.1 and W=1 hostap has a warning:
drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3633:17: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation]
fortify-string.h recommends not to use strncpy() so use strscpy() which fixes
the warning. Also now it's guarenteed that the string is NUL-terminated.
Compile tested only.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613140918.389690-4-kvalo@kernel.org
With GCC 13.1 and W=1 brcmsmac has warnings like this:
./include/trace/stages/stage5_get_offsets.h:23:31: warning: function 'trace_event_get_offsets_brcms_dbg' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
Add a workaround which disables -Wsuggest-attribute=format in
brcms_trace_brcmsmac_msg.h. I see similar workarounds in other drivers as well.
Compile tested only.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613140918.389690-3-kvalo@kernel.org
With GCC 13.1 and W=1 brcmfmac has warnings like this:
./include/trace/perf.h:26:16: warning: function 'perf_trace_brcmf_dbg' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
Add a workaround which disables -Wsuggest-attribute=format in tracepoint.h. I
see similar workarounds in other drivers as well.
Compile tested only.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230613140918.389690-2-kvalo@kernel.org
