FF-A memory descriptors may need to be sent in fragments when they don't
fit in the mailboxes. Doing so involves using the FRAG_TX and FRAG_RX
primitives defined in the FF-A protocol.
Add support in the pKVM FF-A relayer for fragmented descriptors by
monitoring outgoing FRAG_TX transactions and by buffering large
descriptors on the reclaim path.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-11-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Filter out advertising unsupported features, and only advertise
features and properties that are supported by the hypervisor proxy.
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-10-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Handle FFA_MEM_LEND calls from the host by treating them identically to
FFA_MEM_SHARE calls for the purposes of the host stage-2 page-table, but
forwarding on the original request to EL3.
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-9-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Intecept FFA_MEM_RECLAIM calls from the host and transition the host
stage-2 page-table entries from the SHARED_OWNED state back to the OWNED
state once EL3 has confirmed that the secure mapping has been reclaimed.
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-8-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Intercept FFA_MEM_SHARE/FFA_FN64_MEM_SHARE calls from the host and
transition the host stage-2 page-table entries from the OWNED state to
the SHARED_OWNED state prior to forwarding the call onto EL3.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-7-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Extend pKVM's memory protection code so that we can update the host's
stage-2 page-table to track pages shared with secure world by the host
using FF-A and prevent those pages from being mapped into a guest.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-6-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Handle FFA_RXTX_MAP and FFA_RXTX_UNMAP calls from the host by sharing
the host's mailbox memory with the hypervisor and establishing a
separate pair of mailboxes between the hypervisor and the SPMD at EL3.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-5-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The FF-A proxy code needs to allocate its own buffer pair for
communication with EL3 and for forwarding calls from the host at EL1.
Reserve a couple of pages for this purpose and use them to initialise
the hypervisor's FF-A buffer structure.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-4-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Probe FF-A during pKVM initialisation so that we can detect any
inconsistencies in the version or partition ID early on.
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-3-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When KVM is initialised in protected mode, we must take care to filter
certain FFA calls from the host kernel so that the integrity of guest
and hypervisor memory is maintained and is not made available to the
secure world.
As a first step, intercept and block all memory-related FF-A SMC calls
from the host to EL3 and don't advertise any FF-A features. This puts
the framework in place for handling them properly.
Co-developed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230523101828.7328-2-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
sub-tree submissions this week. The mlx5 IRQ fixes are notable,
people were complaining about that. No fires burning.
Current release - regressions:
- eth: mlx5e:
- multiple fixes for dynamic IRQ allocation
- prevent encap offload when neigh update is running
- eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters
Current release - new code bugs:
- eth: mlx5e: DR, add missing mutex init/destroy in pattern manager
Previous releases - always broken:
- tcp: deny tcp_disconnect() when threads are waiting
- sched: prevent ingress Qdiscs from getting installed in random
locations in the hierarchy and moving around
- sched: flower: fix possible OOB write in fl_set_geneve_opt()
- netlink: fix NETLINK_LIST_MEMBERSHIPS length report
- udp6: fix race condition in udp6_sendmsg & connect
- tcp: fix mishandling when the sack compression is deferred
- rtnetlink: validate link attributes set at creation time
- mptcp: fix connect timeout handling
- eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked
- eth: amd-xgbe: fix the false linkup in xgbe_phy_status
- eth: mlx5e:
- fix corner cases in internal buffer configuration
- drain health before unregistering devlink
- usb: qmi_wwan: set DTR quirk for BroadMobi BM818
Misc:
- tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=o77c
-----END PGP SIGNATURE-----
Merge tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy Wear a Dress Day.
Fairly standard-sized batch of fixes, accounting for the lack of
sub-tree submissions this week. The mlx5 IRQ fixes are notable, people
were complaining about that. No fires burning.
Current release - regressions:
- eth: mlx5e:
- multiple fixes for dynamic IRQ allocation
- prevent encap offload when neigh update is running
- eth: mana: fix perf regression: remove rx_cqes, tx_cqes counters
Current release - new code bugs:
- eth: mlx5e: DR, add missing mutex init/destroy in pattern manager
Previous releases - always broken:
- tcp: deny tcp_disconnect() when threads are waiting
- sched: prevent ingress Qdiscs from getting installed in random
locations in the hierarchy and moving around
- sched: flower: fix possible OOB write in fl_set_geneve_opt()
- netlink: fix NETLINK_LIST_MEMBERSHIPS length report
- udp6: fix race condition in udp6_sendmsg & connect
- tcp: fix mishandling when the sack compression is deferred
- rtnetlink: validate link attributes set at creation time
- mptcp: fix connect timeout handling
- eth: stmmac: fix call trace when stmmac_xdp_xmit() is invoked
- eth: amd-xgbe: fix the false linkup in xgbe_phy_status
- eth: mlx5e:
- fix corner cases in internal buffer configuration
- drain health before unregistering devlink
- usb: qmi_wwan: set DTR quirk for BroadMobi BM818
Misc:
- tcp: return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if
user_mss set"
* tag 'net-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (71 commits)
mptcp: fix active subflow finalization
mptcp: add annotations around sk->sk_shutdown accesses
mptcp: fix data race around msk->first access
mptcp: consolidate passive msk socket initialization
mptcp: add annotations around msk->subflow accesses
mptcp: fix connect timeout handling
rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsg
rtnetlink: move IFLA_GSO_ tb check to validate_linkmsg
rtnetlink: call validate_linkmsg in rtnl_create_link
ice: recycle/free all of the fragments from multi-buffer frame
net: phy: mxl-gpy: extend interrupt fix to all impacted variants
net: renesas: rswitch: Fix return value in error path of xmit
net: dsa: mv88e6xxx: Increase wait after reset deactivation
net: ipa: Use correct value for IPA_STATUS_SIZE
tcp: fix mishandling when the sack compression is deferred.
net/sched: flower: fix possible OOB write in fl_set_geneve_opt()
sfc: fix error unwinds in TC offload
net/mlx5: Read embedded cpu after init bit cleared
net/mlx5e: Fix error handling in mlx5e_refresh_tirs
net/mlx5: Ensure af_desc.mask is properly initialized
...
When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.
To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.
This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.
Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.
Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c. Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn. vhost_worker now returns true if work was done.
The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit. This collection clears
__fatal_signal_pending. This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.
For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file. To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec. The
coredump code and de_thread have been modified to ignore vhost threads.
Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.
Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.
Fixes: 6e890c5d50 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Verify that KVM reports the actual number of CPUID entries on success, but
doesn't touch the userspace struct on failure (which for better or worse,
is KVM's ABI).
Link: https://lore.kernel.org/r/20230526210340.2799158-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Update cpuid->nent if and only if kvm_vcpu_ioctl_get_cpuid2() succeeds.
The sole caller copies @cpuid to userspace only on success, i.e. the
existing code effectively does nothing.
Arguably, KVM should report the number of entries when returning -E2BIG so
that userspace doesn't have to guess the size, but all other similar KVM
ioctls() don't report the size either, i.e. userspace is conditioned to
guess.
Suggested-by: Takahiro Itazuri <itazur@amazon.com>
Link: https://lore.kernel.org/all/20230410141820.57328-1-itazur@amazon.com
Link: https://lore.kernel.org/r/20230526210340.2799158-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
After commit 2de154f541 ("KVM: x86/pmu: Provide "error" semantics
for unsupported-but-known PMU MSRs"), the guest_cpuid_has(DS) check
is not necessary any more since if the guest supports X86_FEATURE_DS,
it never returns 1. And if the guest does not support this feature,
the set_msr handler will get false from kvm_pmu_is_valid_msr() before
reaching this point. Therefore, the check will not be true in all cases
and can be safely removed, which also simplifies the code and improves
its readability.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230411130338.8592-1-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a test for page splitting during dirty logging and for hugepage
recovery after dirty logging.
Page splitting represents non-trivial behavior, which is complicated
by MANUAL_PROTECT mode, which causes pages to be split on the first
clear, instead of when dirty logging is enabled.
Add a test which makes assertions about page counts to help define the
expected behavior of page splitting and to provide needed coverage of the
behavior. This also helps ensure that a failure in eager page splitting
is not covered up by splitting in the vCPU path.
Tested by running the test on an Intel Haswell machine w/wo
MANUAL_PROTECT.
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Link: https://lore.kernel.org/r/20230131181820.179033-3-bgardon@google.com
[sean: let the user run without hugetlb, as suggested by Paolo]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move some helper functions from dirty_log_perf_test.c to the memstress
library so that they can be used in a future commit which tests page
splitting during dirty logging.
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Link: https://lore.kernel.org/r/20230131181820.179033-2-bgardon@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Access the same memory addresses on each iteration of the memstress
guest code. This ensures that the state of KVM's page tables
is the same after every iteration, including the pages that host the
guest page tables for args and vcpu_args.
This difference is visible when running the proposed
dirty_log_page_splitting_test[*] on AMD, or on Intel with pml=0 and
eptad=0. The tests fail due to different semantics of dirty bits for
page-table pages on AMD (and eptad=0) and Intel. Both AMD and Intel with
eptad=0 treat page-table accesses as writes, therefore more pages are
dropped before the repopulation phase when dirty logging is disabled.
The "missing" page had been included in the population phase because it
hosts the page tables for vcpu_args, but repopulation does not need it."
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Link: https://lore.kernel.org/r/20230412200913.1570873-1-pbonzini@redhat.com
[sean: add additional details in changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
On kzalloc() failure, taking the `goto fail` path leads to kfree(NULL).
Such no-op has no use. Move it out.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20230327175457.735903-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
According to the hardware manual, when the Poll command is issued, the
byte returned by the I/O read is 1 in Bit 7 when there is an interrupt,
and the highest priority binary code in Bits 2:0. The current pic
simulation code is not implemented strictly according to the above
expression.
Fix the implementation of pic_poll_read(), set Bit 7 when there is an
interrupt.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/r/20230419021924.1342184-1-alexjlzheng@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the common check-and-set handling of PAT MSR writes out of vendor
code and into kvm_set_msr_common(). This aligns writes with reads, which
are already handled in common code, i.e. makes the handling of reads and
writes symmetrical in common code.
Alternatively, the common handling in kvm_get_msr_common() could be moved
to vendor code, but duplicating code is generally undesirable (even though
the duplicatated code is trivial in this case), and guest writes to PAT
should be rare, i.e. the overhead of the extra function call is a
non-issue in practice.
Suggested-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make kvm_mtrr_valid() local to mtrr.c now that it's not used to check the
validity of a PAT MSR value.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop handling of MSR_IA32_CR_PAT from mtrr.c now that SVM and VMX handle
writes without bouncing through kvm_set_msr_common(). PAT isn't truly an
MTRR even though it affects memory types, and more importantly KVM enables
hardware virtualization of guest PAT (by NOT setting "ignore guest PAT")
when a guest has non-coherent DMA, i.e. KVM doesn't need to zap SPTEs when
the guest PAT changes.
The read path is and always has been trivial, i.e. burying it in the MTRR
code does more harm than good.
WARN and continue for the PAT case in kvm_set_msr_common(), as that code
is _currently_ reached if and only if KVM is buggy. Defer cleaning up the
lack of symmetry between the read and write paths to a future patch.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the MTRR macros to identify the ranges of possible MTRR MSRs instead
of bounding the ranges with a mismash of open coded values and unrelated
MSR indices. Carving out the gap for the machine check MSRs in particular
is confusing, as it's easy to incorrectly think the case statement handles
MCE MSRs instead of skipping them.
Drop the range-based funneling of MSRs between the end of the MCE MSRs
and MTRR_DEF_TYPE, i.e. 0x2A0-0x2FF, and instead handle MTTR_DEF_TYPE as
the one-off case that it is.
Extract PAT (0x277) as well in anticipation of dropping PAT "handling"
from the MTRR code.
Keep the range-based handling for the variable+fixed MTRRs even though
capturing unknown MSRs 0x214-0x24F is arguably "wrong". There is a gap in
the fixed MTRRs, 0x260-0x267, i.e. the MTRR code needs to filter out
unknown MSRs anyways, and using a single range generates marginally better
code for the big switch statement.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to dedup the logic for retrieving a variable MTRR range
structure given a variable MTRR MSR index.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to query whether a variable MTRR MSR is a base versus as mask
MSR. Replace the unnecessarily complex math with a simple check on bit 0;
base MSRs are even, mask MSRs are odd.
Link: https://lore.kernel.org/r/20230511233351.635053-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use kvm_pat_valid() directly instead of bouncing through kvm_mtrr_valid().
The PAT is not an MTRR, and kvm_mtrr_valid() just redirects to
kvm_pat_valid(), i.e. is exempt from KVM's "zap SPTEs" logic that's
needed to honor guest MTRRs when the VM has a passthrough device with
non-coherent DMA (KVM does NOT set "ignore guest PAT" in this case, and so
enables hardware virtualization of the guest's PAT, i.e. doesn't need to
manually emulate the PAT memtype).
Signed-off-by: Ke Guo <guoke@uniontech.com>
[sean: massage changelog]
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Open code setting "vcpu->arch.pat" in vmx_set_msr() instead of bouncing
through kvm_set_msr_common() to get to the same code in kvm_mtrr_set_msr().
This aligns VMX with SVM, avoids hiding a very simple operation behind a
relatively complicated function call (finding the PAT MSR case in
kvm_set_msr_common() is non-trivial), and most importantly, makes it clear
that not unwinding the VMCS updates if kvm_set_msr_common() isn't a bug
(because kvm_set_msr_common() can never fail for PAT).
Opportunistically set vcpu->arch.pat before updating the VMCS info so that
a future patch can move the common bits (back) into kvm_set_msr_common()
without a functional change.
Note, MSR_IA32_CR_PAT is 0x277, and is very subtly handled by
case 0x200 ... MSR_IA32_MC0_CTL2 - 1:
in kvm_set_msr_common().
Cc: Kai Huang <kai.huang@intel.com>
Signed-off-by: Wenyao Hai <haiwenyao@uniontech.com>
[sean: massage changelog, hoist setting vcpu->arch.pat up]
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230511233351.635053-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Current KVM_BUG and KVM_BUG_ON assume that 'cond' passed from callers is
32-bit as it casts 'cond' to the type of int. This will be wrong if 'cond'
provided by a caller is 64-bit, e.g. an error code of 0xc0000d0300000000
will be converted to 0, which is not expected.
Improves the implementation by using bool in KVM_BUG and KVM_BUG_ON.
'bool' is preferred to 'int' as __ret is essentially used as a boolean
and coding-stytle.rst documents that use of bool is encouraged to improve
readability and is often a better option than 'int' for storing boolean
values.
Fixes: 0b8f11737c ("KVM: Add infrastructure and macro to mark VM as bugged")
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Mingwei Zhang <mizhang@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230307135233.54684-1-wei.w.wang@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Don't just check the raw PMU type, the only core PMU on homogeneous x86,
check raw and all dynamically added PMUs. Extend the
perf_pmu__warn_invalid_config to check all 4 config values.
Rather than process the format list once per event, store the computed
masks for each config value.
Don't ignore the mask being zero, which is likely for config2 and
config3, add config_masks_present so config values can be ignored only
when no format information is present.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230601023644.587584-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid scanning format list for each event parsed.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20230601023644.587584-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we allow the hash table to be configured to rows above 2^20,
we should limit it depending on the available memory to some
sane values. Switch to kvmalloc allocation to better select
the needed allocation type.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Current range [8, 20] is set purely due to historical reasons
because at the time, ~1M (2^20) was considered sufficient.
With this change, 27 is the upper limit for 64-bit, 20 otherwise.
Previous change regarding this limit is here.
Link: https://lore.kernel.org/all/86eabeb9dd62aebf1e2533926fdd13fed48bab1f.1631289960.git.aclaudi@redhat.com/T/#u
Signed-off-by: Abhijeet Rastogi <abhijeet.1989@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
KUnit aborts the current thread when an assertion fails. Currently, this
is done conditionally as part of the kunit_do_failed_assertion()
function, but this hides the kunit_abort() call from the compiler
(particularly if it's in another module). This, in turn, can lead to
both suboptimal code generation (the compiler can't know if
kunit_do_failed_assertion() will return), and to static analysis tools
like smatch giving false positives.
Moving the kunit_abort() call into the macro should give the compiler
and tools a better chance at understanding what's going on. Doing so
requires exporting kunit_abort(), though it's recommended to continue to
use assertions in lieu of aborting directly.
In addition, kunit_abort() and kunit_do_failed_assertion() are renamed
to make it clear they they're intended for internal KUnit use, to:
__kunit_do_failed_assertion() and __kunit_abort()
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_add_action() and related functions named the kunit_action_t
parameter 'func' in early drafts, which was later renamed to 'action'
However, the doc comments were not properly updated.
Fix these to avoid confusion and 'make htmldocs' warnings.
Fixes: b9dce8a1ed ("kunit: Add kunit_add_action() to defer a call until test exit")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20230530151840.16a56460@canb.auug.org.au/
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add YAML devicetree binding for AWINIC AW20036/AW20052/AW20074
led driver.
Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230519130403.212479-2-mmkurbanov@sberdevices.ru
Signed-off-by: Lee Jones <lee@kernel.org>
This commit adds support for AWINIC AW20036/AW20054/AW20072 LED driver.
This driver supports following AW200XX features:
- Individual 64-level DIM currents
Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230519130403.212479-3-mmkurbanov@sberdevices.ru
Signed-off-by: Lee Jones <lee@kernel.org>
With the addition of -fstrict-flex-arrays=3, struct sha256_state's
trailing array is no longer ignored by CONFIG_FORTIFY_SOURCE:
struct sha256_state {
u32 state[SHA256_DIGEST_SIZE / 4];
u64 count;
u8 buf[SHA256_BLOCK_SIZE];
};
This means that the memcpy() calls with "buf" as a destination in
sha256.c's code will attempt to perform run-time bounds checking, which
could lead to calling missing functions, specifically a potential
WARN_ONCE, which isn't callable from purgatory.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/lkml/175578ec-9dec-7a9c-8d3a-43f24ff86b92@leemhuis.info/
Bisected-by: "Joan Bruguera Micó" <joanbrugueram@gmail.com>
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230531003414.never.050-kees@kernel.org
With the addition of -fstrict-flex-arrays=3, struct sha256_state's
trailing array is no longer ignored by CONFIG_FORTIFY_SOURCE:
struct sha256_state {
u32 state[SHA256_DIGEST_SIZE / 4];
u64 count;
u8 buf[SHA256_BLOCK_SIZE];
};
This means that the memcpy() calls with "buf" as a destination in
sha256.c's code will attempt to perform run-time bounds checking, which
could lead to calling missing functions, specifically a potential
WARN_ONCE, which isn't callable from purgatory.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/lkml/175578ec-9dec-7a9c-8d3a-43f24ff86b92@leemhuis.info/
Bisected-by: "Joan Bruguera Micó" <joanbrugueram@gmail.com>
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Alyssa Ross <hi@alyssa.is>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20230531003345.never.325-kees@kernel.org
struct acpi_table_slit is used for copying System Locality Information
Table data from ACPI tables. Here `entry` is a flex array but it was
using ancient 1-element fake flexible array, which has been deprecated.
Replace it with a C99 flexible array.
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230523161815.3083-1-wyes.karny@amd.com
lib/string.c is built with -ffreestanding, which prevents the compiler
from replacing certain functions with calls to their library versions.
On the other hand, this also prevents Clang and GCC from instrumenting
calls to memcpy() when building with KASAN, KCSAN or KMSAN:
- KASAN normally replaces memcpy() with __asan_memcpy() with the
additional cc-param,asan-kernel-mem-intrinsic-prefix=1;
- KCSAN and KMSAN replace memcpy() with __tsan_memcpy() and
__msan_memcpy() by default.
To let the tools catch memory accesses from strlcpy/strlcat, replace
the calls to memcpy() with __builtin_memcpy(), which KASAN, KCSAN and
KMSAN are able to replace even in -ffreestanding mode.
This preserves the behavior in normal builds (__builtin_memcpy() ends up
being replaced with memcpy()), and does not introduce new instrumentation
in unwanted places, as strlcpy/strlcat are already instrumented.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230530083911.1104336-1-glider@google.com
Use grep instead of sed for all compiled sources generation, it is three
times more efficient.
Signed-off-by: Jialu Xu <xujialu@vimux.org>
Tested-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230601010402.71040-1-xujialu@vimux.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add additional test cases to `fib_lookup.c` prog_test.
These test cases add a new /24 network to the previously unused veth2
device, removes the directly connected route from the main routing table
and moves it to table 100.
The first test case then confirms a fib lookup for a remote address in
this directly connected network, using the main routing table fails.
The second test case ensures the same fib lookup using table 100 succeeds.
An additional pair of tests which function in the same manner are added
for IPv6.
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-2-0a31c22c748c@gmail.com
Add ability to specify routing table ID to the `bpf_fib_lookup` BPF
helper.
A new field `tbid` is added to `struct bpf_fib_lookup` used as
parameters to the `bpf_fib_lookup` BPF helper.
When the helper is called with the `BPF_FIB_LOOKUP_DIRECT` and
`BPF_FIB_LOOKUP_TBID` flags the `tbid` field in `struct bpf_fib_lookup`
will be used as the table ID for the fib lookup.
If the `tbid` does not exist the fib lookup will fail with
`BPF_FIB_LKUP_RET_NOT_FWDED`.
The `tbid` field becomes a union over the vlan related output fields
in `struct bpf_fib_lookup` and will be zeroed immediately after usage.
This functionality is useful in containerized environments.
For instance, if a CNI wants to dictate the next-hop for traffic leaving
a container it can create a container-specific routing table and perform
a fib lookup against this table in a "host-net-namespace-side" TC program.
This functionality also allows `ip rule` like functionality at the TC
layer, allowing an eBPF program to pick a routing table based on some
aspect of the sk_buff.
As a concrete use case, this feature will be used in Cilium's SRv6 L3VPN
datapath.
When egress traffic leaves a Pod an eBPF program attached by Cilium will
determine which VRF the egress traffic should target, and then perform a
FIB lookup in a specific table representing this VRF's FIB.
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230505-bpf-add-tbid-fib-lookup-v2-1-0a31c22c748c@gmail.com
The Linux Kernel currently only requires make v3.82 while the grouped
target functionality requires make v4.3. Removed the grouped target
introduced in 4ce1f694eb ("selinux: ensure av_permissions.h is
built when needed") as well as the multiple header file targets in
the make rule. This effectively reverts the problem commit.
We will revisit this change when make >= 4.3 is required by the rest
of the kernel.
Cc: stable@vger.kernel.org
Fixes: 4ce1f694eb ("selinux: ensure av_permissions.h is built when needed")
Reported-by: Erwan Velu <e.velu@criteo.com>
Reported-by: Luiz Capitulino <luizcap@amazon.com>
Tested-by: Luiz Capitulino <luizcap@amazon.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
