Add support to build ACPI subsystem in defconfig.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-21-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On ACPI based platforms, timer related information is
available in RHCT. Add ACPI based probe support to the
timer initialization.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-20-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Initialize the timer driver based on RHCT table on ACPI based
platforms.
Currently, ACPI doesn't support a flag to indicate that the
timer interrupt can wake up the cpu irrespective of its
power state. It will be added in future update.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-19-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Refactor the timer init function such that few things can be
shared by both DT and ACPI based platforms.
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-18-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add support for initializing the RISC-V INTC driver on ACPI
platforms.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-17-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On ACPI based platforms, few details like ISA need to be read
from the ACPI table. Enable cpuinfo on ACPI based systems.
ACPI has nothing similar to DT compatible property for each CPU.
Hence, cpuinfo will not print "uarch".
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-16-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On ACPI based systems, the information about the hart
like ISA is provided by the RISC-V Hart Capabilities Table (RHCT).
Enable filling up hwcap structure based on the information in RHCT.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-15-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During boot we call riscv_of_processor_hartid() for each hart that we
add to the possible cpus list. Repeating the call again here is not
required, if we iterate over the list of possible CPUs, rather than the
list of all CPUs.
The call to of_property_read_string() for "riscv,isa" cannot fail
either, as it has previously succeeded in riscv_of_processor_hartid(),
but leaving in the error checking makes the operation of the loop more
obvious & provides leeway for future refactoring of
riscv_of_processor_hartid().
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-14-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enable SMP boot on ACPI based platforms by using the RINTC
structures in the MADT table.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-13-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
setup_smp() currently assumes DT-based platforms. To enable ACPI,
first make this a wrapper function and move existing code to
a separate DT-specific function.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-12-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RHCT is a new table defined for RISC-V to communicate the
features of the CPU to the OS. Create a new architecture folder
in drivers/acpi and add RHCT parsing code.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-11-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RINTC structures in the MADT provide mapping between the hartid
and the CPU. This is required many times even at run time like
cpuinfo. So, instead of parsing the ACPI table every time, cache
the RINTC structures and provide a function to get the correct
RINTC structure for a given cpu.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-10-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Initialize the ACPI core for RISC-V during boot.
ACPI tables and interpreter are initialized based on
the information passed from the firmware and the value of
the kernel parameter 'acpi'.
With ACPI support added for RISC-V, the kernel parameter 'acpi'
is also supported on RISC-V. Hence, update the documentation.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-9-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
processor_core needs arch-specific functions to map the ACPI ID
to the physical ID. In RISC-V platforms, hartid is the physical id
and RINTC structure in MADT provides this mapping. Add arch-specific
function to get this mapping from RINTC.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-8-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enable ACPI core for RISC-V after adding architecture-specific
interfaces and header files required to build the ACPI core.
1) Couple of header files are required unconditionally by the ACPI
core. Add empty acenv.h and cpu.h header files.
2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
be provided by the architecture. Define dummy interfaces for now
so that build succeeds. Actual implementation will be added when
PCI support is added for ACPI along with external interrupt
controller support.
3) A few globals and memory mapping related functions specific
to the architecture need to be provided.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-7-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Without this, if the tables are larger than 4K,
acpi_map() will fail.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-6-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When MADT is parsed, print RINTC information as below:
ACPI: RISC-V INTC (acpi_uid[0x0000] hart_id[0x0] enabled)
ACPI: RISC-V INTC (acpi_uid[0x0001] hart_id[0x1] enabled)
...
ACPI: RISC-V INTC (acpi_uid[0x000f] hart_id[0xf] enabled)
This debug information will be very helpful during bring up.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-5-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With CONFIG_ACPI enabled for RISC-V, this driver gets enabled in
allmodconfig build. However, build fails with clang and below
error is seen.
drivers/crypto/hisilicon/qm.c:627:10: error: invalid output constraint '+Q' in asm
"+Q" (*((char __iomem *)fun_base))
^
This is expected error with clang due to the way it is designed.
To fix this issue, move arm64 assembly code under #if.
Link: https://github.com/ClangBuiltLinux/linux/issues/999
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
[sunilvl@ventanamicro.com: Moved tmp0 and tmp1 into the #if]
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20230515054928.2079268-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With CONFIG_ACPI enabled for RISC-V, this driver gets enabled
in allmodconfig build. However, RISC-V doesn't support sub-word
atomics which is used by this driver and hence allmodconfig
build will fail.
There is currently no plan to support this driver for RISC-V. So,
disable this driver for RISC-V even when ACPI is enabled.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The STARRY himax83102-j02 is a 10.51" WUXGA TFT LCD panel,
which fits in nicely with the existing panel-boe-tv101wum-nl6
driver. Hence, we add a new compatible with panel specific config.
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-2-yangcong5@huaqin.corp-partner.google.com
Merge series from Walker Chen <walker.chen@starfivetech.com>:
This patchset adds TDM audio driver for the StarFive JH7110 SoC. The
first patch adds device tree binding for TDM module. The second patch
adds tdm driver support for JH7110 SoC. The last patch adds device tree
node and pins configuration of tdm to JH7110 dts.
The series has been tested on the VisionFive 2 board by plugging an
audio expansion board.
For more information of audio expansion board, you can take a look
at the following webpage:
https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
These patches concern modifications made in mt8186[1]. The clock
unregistration mechanism used in mt8188 and mt8195 is similar with
mt8186, resulting in the same problem existing within the driver.
Therefore, the solution has also been applied to these two platforms.
[1] https://lore.kernel.org/all/20230511092437.1.I31cceffc8c45bb1af16eb613e197b3df92cdc19e@changeid/
This pull request includes a single patch from the project for consecutive
effort of memory safety array. It brings no change to user space, thus it
is worth to apply it as a fix.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZHioYQAKCRCsLtaWM8Lw
E1/+AQC5V57OGn7LqgUeh2KwTBpEcmaogMhq1fwyPoiS15pbiAD/WraHL02w+N/O
TOGNiD2vodiMa2ngZAa/hyy54oxn0Ao=
=tjpp
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single patch to use a flexible array rather than a zero-length one"
* tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: Replace zero-length array with flexible-array member
Currently, icq is tracked by both request_queue(icq->q_node) and
task(icq->ioc_node), and ioc_clear_queue() from elevator exit is not
safe because it can access the list without protection:
ioc_clear_queue ioc_release_fn
lock queue_lock
list_splice
/* move queue list to a local list */
unlock queue_lock
/*
* lock is released, the local list
* can be accessed through task exit.
*/
lock ioc->lock
while (!hlist_empty)
icq = hlist_entry
lock queue_lock
ioc_destroy_icq
delete icq->ioc_node
while (!list_empty)
icq = list_entry() list_del icq->q_node
/*
* This is not protected by any lock,
* list_entry concurrent with list_del
* is not safe.
*/
unlock queue_lock
unlock ioc->lock
Fix this problem by protecting list 'icq->q_node' by queue_lock from
ioc_clear_queue().
Reported-and-tested-by: Pradeep Pragallapati <quic_pragalla@quicinc.com>
Link: https://lore.kernel.org/lkml/20230517084434.18932-1-quic_pragalla@quicinc.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531073435.2923422-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the iomap buffered-io code can't add a folio to a bio, it allocates a
new bio and adds the folio to that one. This is done using bio_add_folio(),
but doesn't check for errors.
As adding a folio to a newly created bio can't fail, use the newly
introduced bio_add_folio_nofail() function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/58fa893c24c67340a63323f09a179fefdca07f2a.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check if adding pages to resync bio fails and if bail out.
As the comment above suggests this cannot happen, WARN if it actually
happens. Technically __bio_add_pages() would be sufficient here, but
asserting the pages actually get added to the bio is preferred.
This way we can mark bio_add_pages as __must_check.
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/33aea4c271220dc9bcab58c4b7bec478c1511142.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sync request code uses bio_add_page() to add a page to a newly created bio.
bio_add_page() can fail, but the return value is never checked.
Use __bio_add_page() as adding a single page to a newly created bio is
guaranteed to succeed.
This brings us a step closer to marking bio_add_page() as __must_check.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/6cf7f66c6e646231200d025dfd5f2d3ae75c8fe5.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
alloc_behind_master_bio() can possibly add multiple pages to a bio, but it
is not checking for the return value of bio_add_page() if adding really
succeeded.
Check if the page adding succeeded and if not bail out.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/827aa12d44ebf3f50b41b47f5cedc0f80179f2c1.1685532726.git.johannes.thumshirn@wdc.com
[axboe: fold in s/free_page/put_page fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for a new 'non CCA clear key token' with these
ECC clear keys supported:
- ECC P256
- ECC P384
- ECC P521
- ECC ED25519
- ECC ED448
This makes it possible to derive a protected key from this
ECC clear key input via PKEY_KBLOB2PROTK3 ioctl. As of now
the only way to derive protected keys from these clear key
tokens is via PCKMO instruction. For AES keys an alternate
path via creating a secure key from the clear key and then
derive a protected key from the secure key exists. This
alternate path is not implemented for ECC keys as it would
require to rearrange and maybe recalculate the clear key
material for input to derive an CCA or EP11 ECC secure key.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This is an internal rework of the pkey code to not use the
struct pkey_protkey internal any more. This struct has a hard
coded protected key buffer with MAXPROTKEYSIZE = 64 bytes.
However, with support for ECC protected key, this limit is
too short and thus this patch reworks all the internal code
to use the triple u8 *protkey, u32 protkeylen, u32 protkeytype
instead. So the ioctl which still has to deal with this struct
coming from userspace and/or provided to userspace invoke all
the internal functions now with the triple instead of passing
a pointer to struct pkey_protkey.
Also the struct pkey_clrkey has been internally replaced in
a similar way. This struct also has a hard coded clear key
buffer of MAXCLRKEYSIZE = 32 bytes and thus is not usable with
e.g. ECC clear key material.
This is a transparent rework for userspace applications using
the pkey API. The internal kernel API used by the PAES crypto
ciphers has been adapted to this change to make it possible
to provide ECC protected keys via this interface in the future.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This patch introduces reverse x-mas trees for all
local variables on all the functions in pkey.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Currently zcore_reipl_write() always use DIAG308_LOAD_CLEAR to ipl the
system (used by ngdump and zfcpdump to ipl the original kernel after
dumping).
Instead of 'always clear' check OS_INFO_FLAG_REIPL_CLEAR flag and use
either LOAD_CLEAR or LOAD_NORMAL diag308 subcode accordingly.
For that read os_info and check for the valid os_info flags entry
in zcore_reipl_init(). Do not return error on failure (e.g. os_info
checksum error) in order to continue dump processing, considering
that os_info could be corrupted on the panicked system.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Introduce new OS_INFO_FLAGS_ENTRY to os_info pointing to the field
with bit flags.
Add OS_INFO_FLAGS_ENTRY upon dump_reipl shutdown action processing and
set OS_INFO_FLAG_REIPL_CLEAR flag indicating 'clear' sysfs attribute has
been set on the panicked system for specified ipl type. This flag can be
used to inform the dumper whether LOAD_CLEAR or LOAD_NORMAL diag308
subcode to be used for ipl after dumping the memory.
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Avoid linker error for randomly generated config file that
has CONFIG_BRANCH_PROFILE_NONE enabled and make it similar
to riscv, x86 and also to commit 4bf3ec384e ("s390: disable
branch profiling for vdso").
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The Amlogic G12A/G12B/SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver
(ver 1.21a), with a custom glue managing the IP resets, clock and data
inputs similar to the DW-HDMI Glue on other Amlogic SoCs.
This adds support for the Glue managing the transceiver, mimicing the init
flow provided by Amlogic to setup the ENCL encoder, the glue, the transceiver,
the digital D-PHY and the Analog PHY in the proper way.
An optional "MEAS" clock can be enabled to measure the delay between each
vsync feeding the DW-MIPI-DSI transceiver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-12-56eb7a4d5b8e@linaro.org
This adds an encoder bridge designed to drive a MIPI-DSI display
by using the ENCL encoder through the internal MIPI DSI transceiver
connected to the output of the ENCL pixel encoder.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-11-56eb7a4d5b8e@linaro.org
This adds supports for the ENCL encoder connected to a MIPI-DSI transceiver on the
Amlogic AXG, G12A, G12B & SM1 SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-10-56eb7a4d5b8e@linaro.org
Only DW-HDMI currently needs components since it reuses
the drm-meson driver context to access HHI registers (sic).
Once this is solved, we can get rid on components.
Until now, limit the components matching to the dw-hdmi compatibles
we know to require this hack, for other bridges simply use probe defer
instead and get over this components sitation.
The back story is that we simply cannot attach DSI adapters bridges
if we use components, only DSI panels, this is because we bind/unbind
the DSI controller at each drm-meson driver master bind tentative.
With this the I2C DSI bridge is unable to find the DSI controller
host and everything fails to probe.
This will simplify a lot adding new or older HDMI bridges.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com> # on Khadas VIM3 + TS050 Panel
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-9-56eb7a4d5b8e@linaro.org
If the case the HDMI controller fails to bind, we try to unbind
all components before calling drm_dev_put() which makes drm_bridge_detach()
crash because unbinding the HDMI controller frees the bridge memory.
The solution is the unbind all components at the end like in the remove
path.
Reviewed-by: Nicolas Belin <nbelin@baylibre.com>
Tested-by: Nicolas Belin <nbelin@baylibre.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-8-56eb7a4d5b8e@linaro.org
