Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/camss@ca00000: simple-bus unit address format error, expected "ca00020"
Fixes: f3d5d3cc69 ("arm64: dts: qcom: sdm630: Configure the camera subsystem")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-10-krzysztof.kozlowski@linaro.org
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc@0/mmc@7824000: simple-bus unit address format error, expected "7824900"
Warning (simple_bus_reg): /soc@0/mmc@7864000: simple-bus unit address format error, expected "7864900"
Warning (simple_bus_reg): /soc@0/mmc@7a24000: simple-bus unit address format error, expected "7a24900"
Fixes: 0484d3ce09 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-7-krzysztof.kozlowski@linaro.org
Match unit-address to reg entry to fix dtbs W=1 warnings:
Warning (simple_bus_reg): /soc/qrng@e1000: simple-bus unit address format error, expected "e3000"
Fixes: 5bf6356212 ("arm64: dts: ipq6018: Add a few device nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230419211856.79332-1-krzysztof.kozlowski@linaro.org
Set up and enable SDHCI2 to enable the microSD slot on Kumano
devices.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-4-0ca7fa521b86@linaro.org
Sony - as per usual - used a whole bunch of GPIO-gated fixed
voltage regulators for camera sensors on Kumano. Describe them
and the corresponding pins.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-3-0ca7fa521b86@linaro.org
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the common DTSI to better document the hardware.
The pin assignment for TLMM is identical on both devices. Great job!
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-2-0ca7fa521b86@linaro.org
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the Griffin and Bahamut device trees to better document
the hardware.
They are the same on both devices! Very nice!
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315-topic-kumano_dts0-v2-1-0ca7fa521b86@linaro.org
Unlike typical GIC interrupts, first cell for SPMI interrupts is the
USID rather than GIC_SPI/GIC_PPI/GIC_LPI qualifier. Fix the resin
interrupt to use USID value 0x0 rather than GIC_SPI define.
Fixes: f86ae6f23a ("arm64: dts: qcom: sagit: add initial device tree for sagit")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230409182145.122895-1-dmitry.baryshkov@linaro.org
The GCC clock controller needs CX power domain, at least according to
DTS:
sc7280-herobrine-crd-pro.dtb: clock-controller@100000: Unevaluated properties are not allowed ('power-domains' was unexpected)
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516105241.30091-3-krzysztof.kozlowski@linaro.org
The GCC clock controller needs CX power domain, at least according to
DTS:
sc7180-trogdor-pompom-r3.dtb: clock-controller@100000: Unevaluated properties are not allowed ('power-domains' was unexpected)
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516105241.30091-2-krzysztof.kozlowski@linaro.org
The initial SM8250 GCC driver added in commit 3e5770921a ("clk: qcom:
gcc: Add global clock controller driver for SM8250") already consumed it
on the clock. This fixes warnings like:
sm8250-xiaomi-elish-csot.dtb: clock-controller@100000: clock-names: ['bi_tcxo', 'bi_tcxo_ao', 'sleep_clk'] is too long
Fixes: 98394efb48 ("dt-bindings: clock: Add SM8250 GCC clock bindings")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516105241.30091-1-krzysztof.kozlowski@linaro.org
There is no point to allow selecting clock controller drivers for
Qualcomm ARMv7 SoCs when building ARM64 kernel, and vice versa. This
makes kernel configuration more difficult as many do not remember the
Qualcomm SoCs model names/numbers. No features should be lost because:
1. There won't be a single image for ARMv7 and ARMv8/9 SoCs.
2. Newer ARMv8/9 SoCs won't be running in arm32 emulation mode.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230514114711.18258-1-krzysztof.kozlowski@linaro.org
Add support to handle the invert logic for branch2 clocks.
Invert branch halt would indicate the clock ON when CLK_OFF
bit is '1' and OFF when CLK_OFF bit is '0'.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512122347.1219-2-quic_tdas@quicinc.com
On older platforms like msm8226, msm8974 and msm8916 the driver in the
downstream kernel enables scaling first before doing the handover of the
clocks.
While this normally doesn't seem to cause noticeable problems, on
apq8026-asus-sparrow this causes the device to immediately reboot,
perhaps due to older rpm firmware that becomes unhappy.
On newer platforms the order has swapped and enabling scaling is done
after the handover, so let's introduce this behavior only conditionally
for msm8226 and msm8974 for now.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230506-rpmcc-scaling-handover-v1-1-374338a8dfd9@z3ntu.xyz
The same exact F frequency table entry is defined in clk-rcg.h
Drop the redundant define to cleanup code.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230417174408.23722-2-ansuelsmth@gmail.com
The same exact F frequency table entry is defined in clk-rcg.h
Drop the redundant define to cleanup code.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230417174408.23722-1-ansuelsmth@gmail.com
The Qualcomm MSM8953 GCC clock controller has clock inputs, thus
existing gcc-other.yaml was not describing it fully. Move the binding
to its own schema file and document the clocks based on DTS. Add driver
contributors as its maintainers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230408143729.84097-1-krzysztof.kozlowski@linaro.org
The vast majority of shared RCGs were not marked as such. Fix it.
Fixes: 496d1a13d4 ("clk: qcom: Add Global Clock Controller driver for QCM2290")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230403174807.345185-1-konrad.dybcio@linaro.org
Add support for the video clock controller for video clients to be able
to request for videocc clocks on SM8550 platform.
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524145203.13153-4-quic_jkona@quicinc.com
The lucid ole pll reuses lucid evo ops but it has an additional test
control register which is required to be programmed, add support to
program the same.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524145203.13153-2-quic_jkona@quicinc.com
Add support for the video clock controller driver for peripheral clock
clients to be able to request for video cc clocks.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524140656.7076-3-quic_tdas@quicinc.com
Merge the SM8450 Video Clock Controller DeviceTree binding through a
topic branch, in order to be able to use the introduced constants in
changes on DeviceTree source branch as well.
Merge the Video Clock Controller DeviceTree bindings through a topic
branch, in order to be able to use the introduced constants in the
DeviceTree source branch as well.
SM8350, like most recent higher-end chips has a separate clock
controller block just for the Venus IP. Document it.
The binding was separated as the driver, unlike the earlier ones, doesn't
expect clock-names to keep it easier to maintain.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230413-topic-lahaina_vidcc-v4-1-86c714a66a81@linaro.org
Add device tree bindings for the video clock controller on Qualcomm
SM8450 platform.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230524140656.7076-2-quic_tdas@quicinc.com
During the ABI-breaking (for good reasons) conversion of the LLCC
register description, SM8550 was not taken into account, resulting
in LLCC being broken on any kernel containing the patch referenced
in the fixes tag.
Fix it by describing the regions properly.
Fixes: ee13b50087 ("qcom: llcc/edac: Fix the base address used for accessing LLCC banks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-kailua-llcc-v1-2-d57bd860c43e@linaro.org
SM8550 (LLCCv4.1) has 4 register regions, this was not described
between its addition and the restructurization that happened in
the commit referenced in the fixes tag.
Fix it.
Fixes: 43aa006e07 ("dt-bindings: arm: msm: Fix register regions used for LLCC banks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517-topic-kailua-llcc-v1-1-d57bd860c43e@linaro.org
In general, the three SKUs of sc7180 (lite, normal, and pro) are
handled dynamically.
The cpufreq table in sc7180.dtsi includes the superset of all CPU
frequencies. The "qcom-cpufreq-hw" driver in Linux shows that we can
dynamically detect which frequencies are actually available on the
currently running CPU and then we can just enable those ones.
The GPU is similarly dynamic. The nvmem has a fuse in it (see
"gpu_speed_bin" in sc7180.dtsi) that the GPU driver can use to figure
out which frequencies to enable.
There is one part, however, that is not so dynamic. The way SDRAM
frequency works in sc7180 is that it's tied to cpufreq. At the busiest
cpufreq operating points we'll pick the top supported SDRAM frequency.
They ramp down together.
For the "pro" SKU of sc7180, we only enable one extra cpufreq step.
That extra cpufreq step runs SDRAM at the same speed as the step
below. Thus, for normal and pro things are OK. There is no sc7180-pro
device tree snippet.
For the "lite" SKU if sc7180, however, things aren't so easy. The
"lite" SKU drops 3 cpufreq entries but can still run SDRAM at max
frequency. That messed things up with the whole scheme. This is why we
added the "sc7180-lite" fragment in commit 8fd01e01fd ("arm64: dts:
qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite").
When the lite scheme came about, it was agreed that the WiFi SKUs of
lazor would _always_ be "lite" and would, in fact, be the only "lite"
devices. Unfortunately, this decision changed and folks didn't realize
that it would be a problem. Specifically, some later lazor WiFi-only
devices were built with "pro" CPUs.
Building WiFi-only lazor with "pro" CPUs isn't the end of the world.
The SDRAM will ramp up a little sooner than it otherwise would, but
aside from a small power hit things work OK. One problem, though, is
that the SDRAM scaling becomes a bit quirky. Specifically, with the
current tables we'll max out SDRAM frequency at 2.1GHz but then
_lower_ it at 2.2GHz / 2.3GHz only to raise it back to max for 2.4GHz
and 2.55GHz.
Let's at least fix this so that the SDRAM frequency doesn't go down in
that quirky way. On true "lite" SKUs this change will be a no-op
because the operating points we're touching are disabled. This change
is only useful when a board that thinks it has a "lite" CPU actually
has a "normal" or "pro" one stuffed.
Fixes: 8fd01e01fd ("arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230515171929.1.Ic8dee2cb79ce39ffc04eab2a344dde47b2f9459f@changeid
