Add support for qcom global clock controller bindings for SDX75 platform.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230512122347.1219-3-quic_tdas@quicinc.com
Wrap note paragraphs in note:: directive as it better fit for the
purpose of noting devlink commands.
Fixes: f2d51e5793 ("net/mlx5: Separate mlx5 driver documentation into multiple pages")
Fixes: cf14af140a ("net/mlx5e: Add vnic devlink health reporter to representors")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The doc forgets to add separator before numbered lists, which causes the
lists to be appended to previous paragraph inline instead.
Add the missing separator.
Fixes: f2d51e5793 ("net/mlx5: Separate mlx5 driver documentation into multiple pages")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
"vnic reporter" section contains unformatted description for vnic
counters, which is rendered as one long paragraph instead of list.
Use bullet and definition lists to match other lists.
Fixes: b0bc615df4 ("net/mlx5: Add vnic devlink health reporter to PFs/VFs")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As priv->dfs_root is cleared, and therefore missed, when change
eswitch mode, move the creation of the root debugfs to the init
callback of mlx5e_nic_profile and mlx5e_uplink_rep_profile, and
the destruction to the cleanup callback for symmeter.
Fixes: 288eca60cc ("net/mlx5e: Add Ethernet driver debugfs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
As part of switchdev mode disablement, driver changes port netdevice
profile from uplink to nic. If this process is triggered by health
recovery flow (PCI reset, for ex.) profile attach would fail because all
fw commands aborted when internal error flag is set. As a result, nic
netdevice profile is not attached and driver fails to rollback to uplink
profile, which leave driver in broken state and cause crash later.
To handle broken state do netdevice profile initialization only instead
of full attachment and release mdev resources on driver suspend as
expected. Actual netdevice attachment is done during driver load.
Fixes: c4d7eb5768 ("net/mxl5e: Add change profile method")
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Caller of mlx5e_tc_act_post_parse() needs it to parse only the subset of
actions starting after previous split and ending at the current action.
However, that range is not provided as arguments and
mlx5e_tc_act_post_parse() uses generic flow_action_for_each() that iterates
over all flow actions. Not only this is redundant, it also causes a bug
when mlx5e_tc_act->post_parse() callback is not idempotent since it will be
called for every split. For example, ct action tc_act_post_parse_ct()
callback obtains a reference to mlx5_ct_ft instance and calling it several
times during parsing stage will cause reference counter imbalance.
Fix the issue by providing a proper action range of the current split
subset to mlx5e_tc_act_post_parse() and only calling
mlx5e_tc_act->post_parse() for actions inside the subset range.
Fixes: 8300f22526 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Don't query the firmware so many times (num rqs * num wqes * wqe frags)
because it slows down linearly the interface creation time when the
product is larger. Do it only once per mdev and store the result in
mlx5e_param.
Due to helper function being called from different files, move it to
an appropriate location. Rename the function with a proper prefix and
add a small cleanup.
This fix applies only for legacy rq.
Fixes: 1b1e486883 ("net/mlx5e: Use query_special_contexts for mkeys")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5 driver needs to parse traces with event_id inside the range of
first_string_trace and num_string_trace. However, mlx5 is parsing all
events with event_id >= first_string_trace.
Fix it by checking for the correct range.
Fixes: c71ad41ccb ("net/mlx5: FW tracer, events handling")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There is no point in recovery during device removal. Also, if health
work started need to wait for it to avoid races and NULL pointer
access.
Hence, drain health WQ before removing device.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5 health mechanism is using devlink APIs, which are using devlink
notify APIs. After the cited patch, using devlink notify APIs after
devlink is unregistered triggers a WARN_ON().
Hence, drain health WQ before devlink is unregistered.
Fixes: cf53021740 ("devlink: Notify users when objects are accessible")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The shared buffer pools configuration which are stored in the SBCM
register are updated when the user changes the prio2buffer mapping.
However, in case the user desired prio2buffer change is invalid,
which can occur due to mapping a lossless priority to a not large enough
buffer, the SBCM update should not be performed, as the user command is
failed.
Thus, Perform the SBCM update only after xoff threshold calculation is
performed and the user prio2buffer mapping is validated.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, when a user triggers a change in port buffer headroom
(buffers 0-7), the driver checks that the requested headroom does
not exceed the total port buffer size. However, this check does not
take into account the internal buffers (buffers 8-9), which are also
part of the total port buffer. This can result in treating invalid port
buffer change requests as valid, causing unintended changes to the shared
buffer.
To address this, include the internal buffers size in the calculation of
available port buffer space which ensures that port buffer requests do not
exceed the correct limit.
Furthermore, remove internal buffers (8-9) size from the total_size
calculation as these buffers are reserved for internal use and are not
exposed to the user.
While at it, add verbosity to the debug prints in
mlx5e_port_query_buffer() function to ease future debugging.
Fixes: ecdf2dadee ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit adds a compeletion to remove dependency on rtnl
lock. But it causes a deadlock for multiple encapsulations:
crash> bt ffff8aece8a64000
PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc"
#0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45
#1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418
#2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898
#3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8
#4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb
#5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core]
#6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core]
#7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core]
#8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core]
#9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core]
#10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core]
#11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core]
#12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8
#13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower]
#14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower]
#15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047
#16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31
#17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853
#18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835
#19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27
#20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245
#21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482
#22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a
#23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2
#24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2
#25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f
#26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8
#27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c
crash> bt 0xffff8aeb07544000
PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9"
#0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45
#1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418
#2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88
#3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b
#4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core]
#5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core]
#6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core]
#7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c
#8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012
#9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d
#10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f
After the first encap is attached, flow will be added to encap
entry's flows list. If neigh update is running at this time, the
following encaps of the flow can't hold the encap_tbl_lock and
sleep. If neigh update thread is waiting for that flow's init_done,
deadlock happens.
Fix it by holding lock outside of the for loop. If neigh update is
running, prevent encap flows from offloading. Since the lock is held
outside of the for loop, concurrent creation of encap entries is not
allowed. So remove unnecessary wait_for_completion call for res_ready.
Fixes: 95435ad799 ("net/mlx5e: Only access fully initialized flows in neigh update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move set_encap_dests() and clean_encap_dests() to the tunnel encap
dedicated file. And rename them to mlx5e_tc_tun_encap_dests_set()
and mlx5e_tc_tun_encap_dests_unset().
No functional change in this patch. It is needed in the next patch.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The Soundwire bindings changed during review, after the SM8550 DTS
Soundwire nodes were merged. Switch to uint16 for Soundwire
qcom,ports-sinterval property, to match with current bindings.
Fixes: 61b006389b ("arm64: dts: qcom: sm8550: add Soundwire controllers")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230418095734.669858-1-krzysztof.kozlowski@linaro.org
Add the power domains exposed by RPMh in the Qualcomm SA8155P platform.
Turns out they differ from SM8150.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411-topic-hanaau-v2-2-fd3d70844b31@linaro.org
Merge the RPMPD DeviceTree binding update through a topic branch, so
make the constants available to both driver and DeviceTree source
branches. Keep the two parts on separate branches to allow merge-back if
necessary towards v6.5.
The RPMhPD setup on SA8155P is different compared to SM8150. Correct
it to ensure the platform will not try accessing forbidden/missing
RPMh entries at boot, as a bad vote will hang the machine.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411-topic-hanaau-v2-3-fd3d70844b31@linaro.org
Merge the RPMPD DeviceTree binding update through a topic branch, so
make the constants available to both driver and DeviceTree source
branches. Keep the two parts on separate branches to allow merge-back if
necessary towards v6.5.
Add a compatible for SA8155P platforms and relevant defines to the
include file.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411-topic-hanaau-v2-1-fd3d70844b31@linaro.org
Align RPM requests node with DT schema by using hyphen instead of
underscore.
Fixes: f300826d27 ("ARM: dts: qcom-msm8974: Sort and clean up nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230410175232.22317-1-krzysztof.kozlowski@linaro.org
The following error was reported when building x86_64 allmodconfig:
error: the following would cause module name conflict:
drivers/soc/qcom/ice.ko
drivers/net/ethernet/intel/ice/ice.ko
Seems the 'ice' module name is already used by some Intel ethernet
driver, so lets rename the Qualcomm Inline Crypto Engine (ICE) module
from 'ice' to 'qcom_ice' to avoid any kind of errors/confusions.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2afbf43a4a ("soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver")
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230516082856.150214-1-abel.vesa@linaro.org
Add the SoC ID for IPQ5312 and IPQ5302, which belong to the family of
IPQ5332 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509033531.21468-3-quic_kathirav@quicinc.com
Add the SoC ID for IPQ5312 and IPQ5302, which belong to the family of
IPQ5332 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509033531.21468-2-quic_kathirav@quicinc.com
Add SOC IDs for the IPQ5018 family.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230429193336.600629-2-robimarko@gmail.com
Add SOC IDs for the IPQ5018 family.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230429193336.600629-1-robimarko@gmail.com
Introduce a driver to query and expose detailed, per-subsystem (as opposed
to the existing qcom_stats driver which exposes SoC-wide data) about low
power mode states of a given RPM master. That includes the APSS (ARM),
MPSS (modem) and other remote cores, depending on the platform
configuration.
This is a vastly cleaned up and restructured version of a similar
driver found in msm-5.4.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230405-topic-master_stats-v6-2-2277b4433748@linaro.org
The RPM MSG RAM contains per-RPM-master (e.g. APPS, ADSP etc.) sleep
statistics. They let one assess which core is actively preventing the
system from entering a true low-power mode.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230405-topic-master_stats-v6-1-2277b4433748@linaro.org
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not ncessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230421025046.4008499-15-tj@kernel.org
'qrc' is known to be non-NULL at this point.
Checking for 'qrc->desc' was expected instead, so use it.
Fixes: a723c95fa1 ("soc: qcom: Add Qualcomm Ramp Controller driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/84727a79d0261b4112411aec23b553504015c02c.1681684138.git.christophe.jaillet@wanadoo.fr
When a platform_driver's .remove() callback returns an error, the driver
core emits
remove callback returned a non-zero value. This will be ignored.
. Replace this by a more specific error message. Then convert to
.remove_new() which is equivalent to returning zero unconditionally in
.remove(). See commit 5c5a7680e6 ("platform: Provide a remove callback
that returns no value") for its rationale.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230415201848.3779001-1-u.kleine-koenig@pengutronix.de
The MSM8226 RPM uses SMD, so it must allow qcom,smd-channels:
qcom-msm8226-samsung-s3ve3g.dtb: rpm-requests: qcom,smd-channels: False schema does not allow ['rpm_requests']
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230410181036.25943-1-krzysztof.kozlowski@linaro.org
Use cpu_to_le32 to cast constants to __le32 before comparing
them with __le32 type pd->key. This fixes the following sparse
warnings:
drivers/soc/qcom/rpmpd.c:895:31: sparse: warning: restricted __le32 degrades to integer
drivers/soc/qcom/rpmpd.c:896:15: sparse: warning: restricted __le32 degrades to integer
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230522160757.284165-1-minhuadotchen@gmail.com
SDCC clocks must be rounded down to avoid overclocking the controller.
Fixes: d9db07f088 ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1682413909-24927-1-git-send-email-mantas@8devices.com
Add node to support the QUP5 SPI controller inside of IPQ8074.
Some devices use this bus in order to manage external switches.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230426185647.180166-1-robimarko@gmail.com
The Nexus 5 has a vibrator connected to the clock output of GP1_CLK
which we can use with the clk-pwm driver, then we can use that pwm with
pwm-vibrator to get haptics functionality.
This patch is based on Brian Masney's previous patch with clk-vibrator.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230427-hammerhead-vibra-v1-4-e87eeb94da51@z3ntu.xyz
We should never let go of the active-only XO vote, as otherwise the
RPM may decide that there are no online users and it can be shut down,
resulting in a total, uncontrolled system collapse.
Guarantee this through adding the CLK_IS_CRITICAL flag.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501-topic-rpmcc_xo_a-v1-3-93f18e47b607@linaro.org
In preparation for supporting keepalive clocks which can never be shut off
(as the platform would fall apart otherwise), make the
DEFINE_CLK_SMD_RPM_BRANCH_A macro accept clock flags for the active-only
clock.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501-topic-rpmcc_xo_a-v1-2-93f18e47b607@linaro.org
In preparation for supporting keepalive clocks which can never be shut off
(as the platform would fall apart otherwise), make the
__DEFINE_CLK_SMD_RPM_BRANCH_PREFIX macro accept clock flags for the
active-only clock.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501-topic-rpmcc_xo_a-v1-1-93f18e47b607@linaro.org
For no apparent reason (as there's just one RPM per SoC), all clocks
currently store a copy of a pointer to smd_rpm. Introduce a single,
global one to save up on space in each clk definition.
bloat-o-meter reports:
Total: Before=41887, After=40843, chg -2.49%
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501130400.107771-1-konrad.dybcio@linaro.org
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 15d09e830b ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501142932.13049-1-quic_tdas@quicinc.com
Using interrupts-extended already indicates what the interrupt-parent
is, so drop the explicit interrupt-parent.
The comment about this being the phy-intr is not helpful either, since
this is the only interrupt in the phy node.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501212446.2570364-4-ahalaney@redhat.com
The property logically makes sense in decimal, and is the standard used
elsewhere.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501212446.2570364-3-ahalaney@redhat.com
