rtStatus is _SUCCESS when the execution reaches this if condition.
Remove the dead code.
Fixes: 67396d2dfe ("staging: r8188eu: merge ODM_ConfigBBWithHeaderFile with its callers")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20220128111954.1028121-1-usama.anjum@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hal_init_macaddr() is just a wrapper around SetHwReg8188EU() which
calls hw_var_set_macaddr(). Remove hal_init_macaddr(), remove the
HW_VAR_MAC_ADDR case from SetHwReg8188EU() and call
hw_var_set_macaddr() directly.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220130111219.6390-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function c2h_evt_clear() is just a wrapper around rtw_write8().
Remove c2h_evt_clear() and call rtw_write8() directly.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220130111219.6390-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After several patches sent by the community along the last couple of
years, it's possible to remove the coding style item from the TODO file
in the driver's folder.
This patch addresses the last code formatting inconsistences and remove
the coding style item from the TODO file.
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Link: https://lore.kernel.org/r/YfYdVokxsQ+Adl+T@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the IS_*_CUT macros from HalVerDef.h. They are not needed, we
can use a switch on chip_vers.CUTVersion directly in dump_chip_info()
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220128115445.6606-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variable max_rx_ampdu_factor in rtw_restructure_ht_ie() and
issue_action_BA() is always set to MAX_AMPDU_FACTOR_64K. Remove the
variable from both functions and use MAX_AMPDU_FACTOR_64K directly.
The case HW_VAR_MAX_RX_AMPDU_FACTOR in GetHalDefVar8188EUsb() is now
unused and can be removed.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220128115445.6606-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GetHalDefVar8188EUsb() is never called with HAL_DEF_DRVINFO_SZ,
HAL_DEF_RA_DECISION_RATE, HAL_DEF_RA_SGI and HAL_DEF_PT_PWR_STATUS.
Remove these cases from the function.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220128115445.6606-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local variables rx_packet_offset and max_recvbuf_sz in
rtw_restructure_ht_ie() are set but never used. Remove them.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220128115445.6606-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binding documentation for compatible 'mediatek,mt7621-sysc' has been updated
to be used as a reset provider. Align reset related bits and system controller
node with binding documentation along the dtsi file.
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220110114930.1406665-5-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/staging/unisys/visorinput/visorinput.c:409:27: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20220125223443.GA76937@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change phy-mode of gmac0 to trgmii to match the other side, port@6.
Flow control needs to be enabled on both sides to work.
It is already enabled on gmac0, enable it on port@6 too.
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220125153903.1469-4-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove reg property from ports node to fix this warning:
Warning (unit_address_vs_reg): /ethernet@1e100000/mdio-bus/switch0@0/ports: node has a reg or ranges property, but no unit name
Another warning surfaces afterwards. Remove #address-cells and #size-cells
from switch0@0 node to fix this warning:
Warning (avoid_unnecessary_addr_size): /ethernet@1e100000/mdio-bus/switch0@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220125153903.1469-3-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add missing register constants present in RFM69 and/or RFM69HW so that
we don't need to hardcode values when referencing them.
this patch adds REG_TESTLNA, REG_TESTAFC constants
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Link: https://lore.kernel.org/r/20220124042636.GA7962@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this driver relies on exposing a char device to userspace to tx
messages. Every message can be sent using different trasmitter settings
such so the tx_cfg must be written before sending any messages.
Failing to do so will cause the message to fail silently depending on
printk/dynamic_debug settings which makes it hard to troubleshoot.
This patch add a control variable that will get initialized once tx_cfg
is set for the fd used when interacting with the char device.
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Link: https://lore.kernel.org/r/20220114221643.GA7843@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The two macros FBTFT_REGISTER_DRIVER and FBTFT_REGISTER_SPI_DRIVER
contain quite some duplication: Both define an spi driver and an of device
table and the differences are quite subtle.
So create two new macros and use both twice.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220118181338.207943-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max bit rate is dependent on which modulation is used. Previous
validation routine only took into consideration min bit rate which can
lead a misconfiguration of the rf69 chip causing the packets not to be
sent/read.
This patch enhances that input check in set_bit_rate to account for
modulation values and their respective max bit rate
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Link: https://lore.kernel.org/r/20220118230555.GA4961@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an explicit dependency between modulation and bit rate
configurations. To ensure proper validation of input value for the
set_bit_rate routine, we must ensure that modulation has been set
before.
This patch ensures that set_modulation is always called before
set_bit_rate for both RX and TX routines
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Link: https://lore.kernel.org/r/20220118230502.GA4897@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rf69 datasheets establishes that the minimum supported bit rate is
1.2 kbps regardless of modulation.
this patch replaces the errouneous validation with the correct value
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Link: https://lore.kernel.org/r/20220118230413.GA4859@mail.google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to allocate the user service in case there is a VCHIQ
connection required, but not available. So simply check the error conditions
before doing an expensive memory allocation.
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-19-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of an invalid handle the function find_servive_by_handle
returns NULL. So take care of this and avoid a NULL pointer dereference.
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-18-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vchiq_get_state() can return a NULL pointer. So handle this cases and
avoid a NULL pointer derefence in vchiq_dump_platform_instances.
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-17-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make vchiq_get_state return early with NULL and improve the readability.
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-16-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is already a check for service->sync, so use this instead of a
separate ternary operator to update the service state.
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1642968143-19281-14-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
