Russell King says:
====================
net: stmmac: report active phy interface
The original patch needs dwmac-thead fixed so the PHY_INTF* definitions
do not clash.
====================
Link: https://patch.msgid.link/aXnpTy6XckPGcmg0@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the active PHY interface from the point of view of the dwmac
hardware to the kernel log, where the core supports reading this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl36F-00000006url-1fWA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid conflicts between stmmac PHY_INTF_* and GMAC_INTF_CTRL register
definitions by replacing the PHY_ prefix with GMAC_.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl36A-00000006urf-19ox@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 9b443e58a8 ("net: stmmac: qcom-ethqos: remove MAC_CTRL_REG
modification"), ethqos->mac_base is only written, never read. Let's
remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vl39x-00000006uvc-0A3S@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: fix potential crash in net/sched/cls_u32.c
GangMin Kim provided a report and a repro fooling u32_classify().
Add skb_header_pointer_careful() variant of skb_header_pointer()
and use it in net/sched/cls_u32.c.
Later we can also use it in net/sched/act_pedit.c
====================
Link: https://patch.msgid.link/20260128141539.3404400-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This variant of skb_header_pointer() should be used in contexts
where @offset argument is user-controlled and could be negative.
Negative offsets are supported, as long as the zone starts
between skb->head and skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128141539.3404400-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The closing #endif comment in otx2_devlink.h refers to RVU_DEVLINK_H,
but the actual header guard is OTX2_DEVLINK_H.
Fix the comment to match the correct header guard name.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127174333.1247747-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the dpll subsystem exports the fractional frequency offset
(FFO) in parts per million (ppm). This granularity is insufficient for
high-precision synchronization scenarios which often require parts per
trillion (ppt) resolution.
Add a new netlink attribute DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT
to expose the FFO in ppt.
Update the dpll netlink core to expect the driver-provided FFO value
to be in ppt. To maintain backward compatibility with existing userspace
tools, populate the legacy DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET
attribute by dividing the new ppt value by 1,000,000.
Update the zl3073x and mlx5 drivers to provide the FFO value in ppt:
- zl3073x: adjust the fixed-point calculation to produce ppt (10^12)
instead of ppm (10^6).
- mlx5: scale the existing ppm value by 1,000,000.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260126162253.27890-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a WARN_ON() when passing an invalid handle to
drm_gem_change_handle_ioctl()
- drop ddc device reference when unloading in imx/tve.
-----BEGIN PGP SIGNATURE-----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=F2Cn
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-01-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc8:
- Fix a WARN_ON() when passing an invalid handle to
drm_gem_change_handle_ioctl()
- drop ddc device reference when unloading in imx/tve.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/a34d967e-b111-4b29-8c97-af3e77b5d33e@linux.intel.com
Extract `pin_init{,_internal}-{cfgs,flags}` to reduce duplication.
[ The new variables will be used later on to easily pass them to
the `scripts/generate_rust_analyzer.py` script. - Miguel ]
Acked-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Link: https://patch.msgid.link/20260127-rust-analyzer-pin-init-duplication-v3-1-118c48c35e88@kernel.org
[ Rebased. Moved new variables above. Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
These imports are already in scope by importing `kernel::prelude::*` and
does not need to be imported separately.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260123172007.136873-2-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This patch moves netconsole selftests from drivers/net to its own target
in drivers/net/netconsole.
This change helps saving some resources from CI since tests in
drivers/net automatically run against real hardware which are not used
by netconsole tests as they rely solely on netdevsim.
lib_netcons.sh is kept under drivers/net/lib since it is also used by
bonding selftests. Finally, drivers/net config remains unchanged as
netpoll_basic.py requires netconsole (and does leverage real HW testing).
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Link: https://patch.msgid.link/20260127-netcons-selftest-target-v2-1-f509ab65b3bc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- L2CAP: Add support for setting BT_PHY
- HCI: Add LE Channel Sounding HCI Command/event structures
- hci_conn: Set link_policy on incoming ACL connections
- MGMT: Add idle_timeout to configurable system parameters
drivers:
- btusb: Add support for MediaTek7920 0489:e158
- btusb: Add device ID for Realtek RTL8761BU
- btusb: Reject autosuspend if discovery is active
- btusb: Add new VID/PID for RTL8852CE
- btusb: Add USB ID 0489:e112 for Realtek 8851BE
- dt-bindings: qcom: Split to separate schema
- btqca: Add WCN6855 firmware priority selection feature
-----BEGIN PGP SIGNATURE-----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=I+rw
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2026-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- L2CAP: Add support for setting BT_PHY
- HCI: Add LE Channel Sounding HCI Command/event structures
- hci_conn: Set link_policy on incoming ACL connections
- MGMT: Add idle_timeout to configurable system parameters
drivers:
- btusb: Add support for MediaTek7920 0489:e158
- btusb: Add device ID for Realtek RTL8761BU
- btusb: Reject autosuspend if discovery is active
- btusb: Add new VID/PID for RTL8852CE
- btusb: Add USB ID 0489:e112 for Realtek 8851BE
- dt-bindings: qcom: Split to separate schema
- btqca: Add WCN6855 firmware priority selection feature
* tag 'for-net-next-2026-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (40 commits)
Bluetooth: hci_qca: Enable HFP hardware offload for WCN6855 and WCN7850
Bluetooth: hci_qca: Refactor HFP hardware offload capability handling
Bluetooth: btusb: Add USB ID 7392:e611 for Edimax EW-7611UXB
Bluetooth: L2CAP: Fix not tracking outstanding TX ident
Bluetooth: MGMT: Fix memory leak in set_ssp_complete
Bluetooth: hci_uart: fix null-ptr-deref in hci_uart_write_work
Bluetooth: btusb: Remove duplicate entry for 0x13d3/0x3618
Bluetooth: btusb: Add device ID for Realtek RTL8761BU
Bluetooth: btintel: Remove unneeded CONFIG_PM* #ifdef's
Bluetooth: btnxpuart: Remove unneeded CONFIG_PM ifdef
Bluetooth: btusb: Add new VID/PID for RTL8852CE
Bluetooth: btintel_pcie: Remove unnecessary check before kfree_skb()
Bluetooth: btusb: Reject autosuspend if discovery is active
Bluetooth: hci_core: Export hci_discovery_active
Bluetooth: btusb: Use pm_ptr instead of #ifdef CONFIG_PM
dt-bindings: bluetooth: qcom,wcn7850-bt: Deprecate old supplies
dt-bindings: bluetooth: qcom,wcn7850-bt: Split to separate schema
dt-bindings: bluetooth: qcom,wcn6855-bt: Deprecate old supplies
dt-bindings: bluetooth: qcom,wcn6855-bt: Split to separate schema
dt-bindings: bluetooth: qcom,wcn6750-bt: Deprecate old supplies
...
====================
Link: https://patch.msgid.link/20260129203610.963067-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DRM_MSM_VALIDATE_XML depends on a python feature. Add a dummy python
interpreter to make it possible to configure this option with dummy
tools.
Fixes: b587f413ca ("drm/msm/gen_header: allow skipping the validation")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Rob Clark <robin.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/20260121105801.1827-1-msuchanek@suse.de
[nathan: Remove empty shell comment line]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
I had issues using my gmail account multiple times this week, hence
switch to @kernel.org.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Gary Guo <gary@garyguo.net>
Acked-by: Kunwu Chan <kunwu.chan@linux.dev>
Link: https://patch.msgid.link/20260129004520.62697-1-boqun@kernel.org
[ Sorted alphabetically in mailmap. Removed Cc tag list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add BAR_SUBRANGE_TEST to the pci_endpoint kselftest suite.
The test uses the PCITEST_BAR_SUBRANGE ioctl and will skip when the
chosen BAR is disabled (-ENODATA), when the endpoint/controller does not
support subrange mapping (-EOPNOTSUPP), or when the BAR is reserved for
the test register space (-EBUSY).
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-9-den@valinux.co.jp
Add a new PCITEST_BAR_SUBRANGE ioctl to exercise EPC BAR subrange
mapping end-to-end.
The test programs a simple 2-subrange layout on the endpoint (via
pci-epf-test) and verifies that:
- the endpoint-provided per-subrange signature bytes are observed at
the expected PCIe BAR offsets, and
- writes to each subrange are routed to the correct backing region
(i.e. the submap order is applied rather than accidentally working
due to an identity mapping).
Return -EOPNOTSUPP when the endpoint does not advertise subrange
mapping, -ENODATA when the BAR is disabled, and -EBUSY when the BAR is
reserved for the test register space.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-8-den@valinux.co.jp
Extend pci-epf-test so that pci_endpoint_test can exercise BAR subrange
mapping end-to-end.
Add BAR_SUBRANGE_SETUP/CLEAR commands that program (and tear down) a
simple 2-subrange layout for a selected BAR. The endpoint deliberately
permutes the physical backing regions (swap the halves) and writes a
deterministic signature byte per subrange. This allows the RC to verify
that the submap order is actually applied, not just that reads/writes
work with an identity mapping.
Advertise CAP_SUBRANGE_MAPPING only when the underlying EPC supports
dynamic_inbound_mapping and subrange_mapping. Also bump the default BAR
sizes (BAR0-4) to 128 KiB so that split subranges are large enough to
satisfy common inbound-translation alignment constraints. E.g. for DWC
EP, the default and maximum CX_ATU_MIN_REGION_SIZE is 64 kB, so 128 KiB
is sufficient for DWC-based EP platforms for 2-subrange testing.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260124145012.2794108-7-den@valinux.co.jp
The current documentation implies that pci_epc_set_bar() is only used
before the host enumerates the endpoint.
In practice, some Endpoint Controllers support calling pci_epc_set_bar()
multiple times for the same BAR (without clearing it) in order to update
inbound address translations after the host has programmed the BAR base
address, which some Endpoint Functions such as vNTB already rely on.
Add document text for that.
Also document the expected call flow for BAR subrange mapping
(pci_epf_bar.num_submap / pci_epf_bar.submap), which may require a
second pci_epc_set_bar() call after the host has programmed the BAR base
address.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260124145012.2794108-6-den@valinux.co.jp
Extend dw_pcie_ep_set_bar() to support inbound mappings for BAR
subranges using Address Match Mode IB iATU when pci_epf_bar.num_submap
is non-zero.
Rename the existing BAR-match helper into dw_pcie_ep_ib_atu_bar() and
introduce dw_pcie_ep_ib_atu_addr() for Address Match Mode. When
num_submap is non-zero, read the assigned BAR base address and program
one inbound iATU window per subrange. Validate the submap array before
programming:
- each subrange is aligned to pci->region_align
- subranges cover the whole BAR (no gaps and no overlaps)
Track Address Match Mode mappings and tear them down on clear_bar() and
on set_bar() error paths to avoid leaving half-programmed state or
untranslated BAR holes.
Advertise this capability by extending the common feature bit
initializer macro (DWC_EPC_COMMON_FEATURES).
This enables multiple inbound windows within a single BAR, which is
useful on platforms where usable BARs are scarce but EPFs need multiple
inbound regions.
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260124145012.2794108-5-den@valinux.co.jp
Add a terminating NULL entry to an of_device_id table in the
qcom-nvmem cpufreq driver to avoid out-of-bounds access (Pei Xiao).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAml7wzISHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1WqoIAIP7c9NCTqGsB8JpjQ4nF557X32SibMC
1Lq/KlOEFIKdnqGY88B1d+ZiVIloEuEvVWeI/lSEywrNqHyAY1KTjf6BLzqtte8q
fcxb4pxAZdkBlhHEOMTCaROn/0/pKG+LTjO5uq+M/WGo7q98ohw4I7ocs3T7sR4K
RbhcvgPgXHHNNzLIfClTSoAty9dzyqRM65AKx+CKM3oe0IdkePJ1Gakv8IziWVBZ
33Eb3kco5BPPhNSapd7zyc4rYlyEmLIFO1TaU9c2nyQ5Yafp+et7jhH4lxF6iwPm
aIRcfB6XzSwpFMnA8zhbUvvoM+QyB+vnQJyaagLIf9+NM/HeQG42jRY=
=cchS
-----END PGP SIGNATURE-----
Merge tag 'pm-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This adds a terminating NULL entry to an of_device_id table in the
qcom-nvmem cpufreq driver to avoid out-of-bounds access (Pei Xiao)"
* tag 'pm-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: qcom-nvmem: add sentinel to qcom_cpufreq_ipq806x_match_list
The interrupts which are handled by the redirection infrastructure provide
a irq_set_affinity() callback, which solely determines the target CPU for
redirection via irq_work and und updates the effective affinity mask.
Contrary to regular MSI interrupts this affinity setting does not change
the underlying interrupt message as the message is only created at setup
time to deliver to the demultiplexing interrupt.
Therefore the message write in msi_domain_set_affinity() is a pointless
exercise. In principle the write is harmless, but a Tegra system exposes a
full system hang during suspend due to that write.
It's unclear why the check for the PCI device state PCI_D0 in
pci_msi_domain_write_msg(), which prevents the actual hardware access if
a device is in powered down state, fails on this particular system, but
that's a different problem which needs to be investigated by the Tegra
experts.
The irq_set_affinity() callback can advise msi_domain_set_affinity() not to
write the MSI message by returning IRQ_SET_MASK_OK_DONE instead of
IRQ_SET_MASK_OK. Do exactly that.
Just to make it clear again:
This is not a correctness issue of the redirection code as returning
IRQ_SET_MASK_OK in that context is completely correct. From the core
code point of view this is solely a optimization to avoid an redundant
hardware write.
As a byproduct it papers over the underlying problem on the Tegra platform,
which fails to put the PCIe device[s] out of PCI_D0 despite the fact that
the devices and busses have been shut down. The redirect infrastructure
just unearthed the underlying issue, which is prone to happen in quite some
other code paths which use the PCI_D0 check to prevent hardware access to
powered down devices.
This therefore has neither a 'Fixes:' nor a 'Closes:' tag associated as the
underlying problem, which is outside the scope of the interrupt code, is
still unresolved.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/all/4e5b349c-6599-4871-9e3b-e10352ae0ca0@nvidia.com
Link: https://patch.msgid.link/87tsw6aglz.ffs@tglx
incorrect. The observations of the committer was that the number of IDs
to be used to probe a chip was incorrect. It happened to be a limitation
of his controller, not a chip issue. Restore the chip description, a
solution must be found somewhere else.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAml7teQACgkQJWrqGEe9
VoTN6AgAiubyhRJB3+wAMk72FO5rqsMOI7H3JNFzMmYY4c0va0mdqfrCI7Wi04ND
07wXlgQVfIDOZBvGjI5WotNeB7muNVc22yJ0Y7HocHKlR6cjFVUzw9tyC3A7wPfP
r2kigHy8reqSu3OgN9hIdjUvdYnGRuLZjZdCJDnK4x7ic6guLWfkP+8V6QUcyp2R
47b9cGwRBw6Pvzqkrv6cGUlB532RtFdx9U8QDgkGJjofuChEaf2SBdOHB3gz6DYZ
qa8LoiMDPeobtxbDzp7j6Nd9bC5LegElHft99sDq99k4jfXof7dC7DTgyU8P6OZ+
yxO4Hbc07EIDojvx83Kq/6dKTp0x0g==
=mJrK
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fix from Miquel Raynal:
"A single late MTD fix, which reverts a fix that turned out to be
incorrect.
The observations of the committer was that the number of IDs to be
used to probe a chip was incorrect. It happened to be a limitation of
his controller, not a chip issue. Restore the chip description, a
solution must be found somewhere else"
* tag 'mtd/fixes-for-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spinand: esmt: fix id code for F50D1G41LB"
overcome the locking validation scheme warning when the PREEMPT_RT
is enabled (Niklas Söderlund)
- Add missing Kconfig dependency on OF for the integrator AP (Bartosz
Golaszewski)
- Fix a dead link in timer bindings for the Armada 370XP (Soham Metha)
- Fix an Oops when read_current_timer is called on ARM32 platforms
where the SP804 is not registered as the sched_clock (Stephen Eta
Zhou)
- Move GIC timer to use request_percpu_irq() instead of
setup_percpu_irq() to allow the removal of the latter (Marc Zyngier)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAml6QwUACgkQqDIjiipP
6E+yYQf/WYy4X+Uja5IS4yQGv5it9B4CrFQYaT41mfFzIOEb7WxARwLR0hnkNbBX
v4uQiSj6IPxlxE7SbIHLHJjyGuMre0FBqEhbQdZJgyKGKBq2kJK3WeRArMmQNZXh
WbvcquamYPHWIHHcxHmvn8IdjGJpE1SyPin6OsU7V3CtQxnLODVWXuo9xj2nUaFd
76a2CVe2rHLXalgFPicF80Gwwsb58kMoayfGrJo8U7gugwCPr/Fho4EkugFeYz9k
90P7UL5c/eShoXHzYLPFdEtrdwPv38c1SerbMR2vXifFUgMLkcicM1+GOWZgKDeM
sbAh71Hg9H58eerR4gOj6MIIvxdzxw==
=JUWB
-----END PGP SIGNATURE-----
Merge tag 'timers-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource
Pull clocksource/events updates from Daniel Lezcano:
- Always leave device running after probe in the sh TMU driver to
overcome the locking validation scheme warning when the PREEMPT_RT
is enabled (Niklas Söderlund)
- Add missing Kconfig dependency on OF for the integrator AP (Bartosz
Golaszewski)
- Fix a dead link in timer bindings for the Armada 370XP (Soham Metha)
- Fix an Oops when read_current_timer is called on ARM32 platforms
where the SP804 is not registered as the sched_clock (Stephen Eta
Zhou)
- Move GIC timer to use request_percpu_irq() instead of
setup_percpu_irq() to allow the removal of the latter (Marc Zyngier)
Link: https://patch.msgid.link/75b163aa-5098-4949-a539-ae1e59e3aaca@linaro.org
When the number of QPs initialized by the device, as read via vft, is zero,
it indicates either an abnormal device configuration or an abnormal read
result.
Returning 0 directly in this case would allow the live migration operation
to complete successfully, leading to incorrect parameter configuration after
migration and preventing the service from recovering normal functionality.
Therefore, in such situations, an error should be returned to roll back the
live migration operation.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20260122020205.2884497-5-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
In special scenarios involving duplicate migrations, after the
first migration is completed, if the original VF device is used
again and then migrated to another destination, the state indicating
data migration completion for the VF device is not reset.
This results in the second migration to the destination being skipped
without performing data migration.
After the modification, it ensures that a complete data migration
is performed after the subsequent migration.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20260122020205.2884497-4-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
After a RAS error occurs on the accelerator device, the accelerator
device will be reset. The live migration state will be abnormal
after reset, and the original state needs to be restored during
the reset process.
Therefore, reset processing needs to be performed in a live
migration scenario.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20260122020205.2884497-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
If device error occurs during live migration, qemu will
reset the VF. At this time, VF reset and device reset are performed
simultaneously. The VF reset will timeout. Therefore, the QM_RESETTING
flag is used to ensure that VF reset and device reset are performed
serially.
Fixes: b0eed08590 ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Link: https://lore.kernel.org/r/20260122020205.2884497-2-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
The devicetree node of the PCIe Root Port/Slot could have the graph port to
link the PCIe M.2 connector node. Since the M.2 connectors are modeled as
Power Sequencing devices, they need to be controlled by the pwrctrl driver
like the Root Port/Slot supplies.
Hence, create the pwrctrl device if the graph port is found in the node.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20260128-pci-m2-v7-2-9b3a5fe3d244@oss.qualcomm.com
To check if a request queue is for a rotational device, a double
negation is needed with the pattern "!blk_queue_nonrot(q)". Simplify
this with the introduction of the helper blk_queue_rot() which tests
if a requests queue limit has the BLK_FEAT_ROTATIONAL feature set.
All call sites of blk_queue_nonrot() are modified to use blk_queue_rot()
and blk_queue_nonrot() definition removed.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unwrap the definition of BLK_FEAT_ATOMIC_WRITES and
renumber this feature to be sequential with BLK_FEAT_SKIP_TAGSET_QUIESCE.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After a successful auxiliary_device_init(), aux_dev->dev.release
(xe_nvm_release_dev()) is responsible for the kfree(nvm). When
there is failure with auxiliary_device_add(), driver will call
auxiliary_device_uninit(), which call put_device(). So that the
.release callback will be triggered to free the memory associated
with the auxiliary_device.
Move the kfree(nvm) into the auxiliary_device_init() failure path
and remove the err goto path to fix below error.
"
[ 13.232905] ==================================================================
[ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe]
[ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273
[ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary)
...
[ 13.233125] Call Trace:
[ 13.233126] <TASK>
[ 13.233127] dump_stack_lvl+0x7f/0xc0
[ 13.233132] print_report+0xce/0x610
[ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0
[ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe]
...
"
v2: drop err goto path. (Alexander)
Fixes: 7926ba2143 ("drm/xe: defer free of NVM auxiliary container to device release callback")
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Brian Nguyen <brian3.nguyen@intel.com>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suggested-by: Brian Nguyen <brian3.nguyen@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260120183239.2966782-7-shuicheng.lin@intel.com
(cherry picked from commit a3187c0c2b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Extend the support for the W35N chip family by supporting the ODTR bus
interface. The chip is capable to run in this mode, which brings a
significant performance improvement.
1S-8S-8S:
# flash_speed /dev/mtd0 -c1 -d
eraseblock write speed is 7529 KiB/s
eraseblock read speed is 15058 KiB/s
8D-8D-8D:
# flash_speed /dev/mtd0 -c1 -d
eraseblock write speed is 9481 KiB/s
eraseblock read speed is 23272 KiB/s
This is +55% read speed and +26% write speed with the same hardware.
Tests have been conducted with a TI AM62A7 using the Cadence quad SPI
controller.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Create a new bus interface named ODTR for "octal DTR", which matches the
following pattern: 8D-8D-8D.
Add octal DTR support for all the existing core operations. Add a second
set of templates for this bus interface.
Give the possibility for drivers to register their read, write and
update cache variants as well as their vendor specific operations.
Check the SPI controller driver supports all the octal DTR commands that
we might need before switching to the ODTR bus interface.
Make the switch by calling ->configure_chip() with the ODTR
parameter. Fallback in case this step fails.
If someone ever attempts to suspend a chip in octal DTR mode, there are
changes that it will loose its configuration at resume. Prevent any
problem by explicitly switching back to SSDR while suspending. Note:
there is a limitation in the current approach, page I/Os are not
available as the dirmaps will be created for the ODTR bus interface if
that option is supported and not switched back to SSDR during
suspend. Switching them is possible but would be costly and would not
bring anything as right after resuming we will switch again to ODTR. In
case this capability is used for debug, developpers should mind to
destroy and recreate suitable direct mappings.
Finally, as a side effect, we increase the buffer for reading IDs to
6. No device at this point returns 6 bytes, but we support 5 bytes IDs,
which means in octal DTR mode we have no other choice than reading an
even number of bytes, hence 6.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Both Macronix and Winbond have chip specific operations which are SSDR
only. Trying to use them in an ODTR setup will fail and doing this is a
pure software bug. Warn explicitly in this case.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The chip configuration hook is the one responsible to actually switch
the switch between bus interfaces. It is natural to give it the bus
interface we expect with a new parameter. For now the only value we can
give is SSDR, but this is subject to change in the future, so add a bit
of extra logic in the implementations of this callback to make sure
both the core and the chip driver are aligned on the request.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
For now all drivers provide SSDR variants only. When we add support for
ODTR modes, there will be a need to differentiate the type of variant we
target as well as the need to check if we support one or the other type
of operations.
Pass this parameter to lower level helpers, which for now is unused, in
order to simplify the patch introducing ODTR support.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Create a bus interface enumeration, currently only containing the
one we support: SSDR, for single SDR, so any operation whose command is
sent over a single data line in SDR mode, ie. any operation matching
1S-XX-XX.
The main spinand_device structure gets a new parameter to store this
enumeration, for now unused. Of course it is set to SSDR during the SSDR
templates initialization to further clarify the state we are in at the
moment.
This member is subject to be used to know in which bus configuration we
and be updated by the core when we switch to faster mode(s).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
