Tamir Duberstein says:
====================
rust: net: replace `kernel::c_str!` with C-Strings
C-String literals were added in Rust 1.77. Replace instances of
`kernel::c_str!` with C-String literals where possible.
====================
Link: https://patch.msgid.link/20260103-cstr-net-v2-0-8688f504b85d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Compiler reports potential uses of uninitialized variables in
mptcp_connect.c when xerror() is called from failure paths.
mptcp_connect.c:1262:11: warning: variable 'raw_addr' is used
uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
xerror() terminates execution by calling exit(), but it is not visible
to the compiler & assumes control flow may continue past the call.
Annotate xerror() with __noreturn so the compiler can correctly reason
about control flow and avoid false-positive uninitialized variable
warnings.
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Link: https://patch.msgid.link/20260101172840.90186-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jamal Hadi Salim says:
====================
net/sched: Fix memory leak on mirred loop
Initialize at_ingress earlier before the if statement.
====================
Link: https://patch.msgid.link/20260101135608.253079-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever a mirred redirect to self on egress happens, mirred allocates a
new skb (skb_to_send). The loop to self check was done after that
allocation, but was not freeing the newly allocated skb, causing a leak.
Fix this by moving the if-statement to before the allocation of the new
skb.
The issue was found by running the accompanying tdc test in 2/2
with config kmemleak enabled.
After a few minutes the kmemleak thread ran and reported the leak coming from
mirred.
Fixes: 1d856251a0 ("net/sched: act_mirred: fix loop detection")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260101135608.253079-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a filesystem is missing its data reloc tree, we get something like
this in dmesg:
BTRFS warning (device loop11): failed to read root (objectid=4): -2
BTRFS error (device loop11): open_ctree failed: -2
objectid is BTRFS_DEV_TREE_OBJECTID, but this should actually be the
value of BTRFS_DATA_RELOC_TREE_OBJECTID.
btrfs_read_roots() prints location.objectid on failure, but this isn't
set when reading the data reloc tree. Set location.objectid to the
correct value on failure, so that the error message makes sense.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Coverity reported a NULL pointer dereference issue (CID 1666756) in
do_abort_log_replay(). When btrfs_alloc_path() fails in
replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay()
calls do_abort_log_replay() which unconditionally dereferences
wc->subvol_path when attempting to print debug information. Fix this by
adding a NULL check before dereferencing wc->subvol_path in
do_abort_log_replay().
Fixes: 2753e49176 ("btrfs: dump detailed info and specific messages on log replay failures")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Currently we only enforcing the free space tree for bs < ps cases, but
with the recently added bs > ps support, we lack the free space tree
enforcing, causing explicit v1 cache mount option to fail on bs > ps
cases:
# mount -o space_cache=v1 /dev/test/scratch1 /mnt/btrfs/
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/mapper/test-scratch1, missing codepage or helper program, or other error.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n7
BTRFS: device fsid ac14a6fa-4ec9-449e-aec9-7d1777bfdc06 devid 1 transid 11 /dev/mapper/test-scratch1 (253:3) scanned by mount (2849)
BTRFS info (device dm-3): first mount of filesystem ac14a6fa-4ec9-449e-aec9-7d1777bfdc06
BTRFS info (device dm-3): using crc32c checksum algorithm
BTRFS warning (device dm-3): support for block size 8192 with page size 4096 is experimental, some features may be missing
BTRFS warning (device dm-3): space cache v1 is being deprecated and will be removed in a future release, please use -o space_cache=v2
BTRFS warning (device dm-3): v1 space cache is not supported for page size 4096 with sectorsize 8192
BTRFS error (device dm-3): open_ctree failed: -22
[FIX]
Just enable the same free space tree for bs > ps cases, aligning the
behavior to bs < ps cases.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Since the introduction of btrfs bs < ps support, v1 cache was never on
the plan due to its hard coded PAGE_SIZE usage, and the future plan to
properly deprecate it.
However for bs < ps cases, even if 'nospace_cache,clear_cache' mount
option is specified, it's never respected and free space tree is always
enabled:
mkfs.btrfs -f -O ^bgt,fst $dev
mount $dev $mnt -o clear_cache,nospace_cache
umount $mnt
btrfs ins dump-super $dev
...
compat_ro_flags 0x3
( FREE_SPACE_TREE |
FREE_SPACE_TREE_VALID )
...
This means a different behavior compared to bs >= ps cases.
[CAUSE]
The forcing usage of v2 space cache is done inside
btrfs_set_free_space_cache_settings(), however it never checks if we're
even using space cache but always enabling v2 cache.
[FIX]
Instead unconditionally enable v2 cache, only forcing v2 cache if the
old v1 cache is required.
Now v2 space cache can be properly disabled on bs < ps cases:
mkfs.btrfs -f -O ^bgt,fst $dev
mount $dev $mnt -o clear_cache,nospace_cache
umount $mnt
btrfs ins dump-super $dev
...
compat_ro_flags 0x0
...
Fixes: 9f73f1aef9 ("btrfs: force v2 space cache usage for subpage mount")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_read_locked_inode() we are calling btrfs_init_file_extent_tree()
while holding a path with a read locked leaf from a subvolume tree, and
btrfs_init_file_extent_tree() may do a GFP_KERNEL allocation, which can
trigger reclaim.
This can create a circular lock dependency which lockdep warns about with
the following splat:
[6.1433] ======================================================
[6.1574] WARNING: possible circular locking dependency detected
[6.1583] 6.18.0+ #4 Tainted: G U
[6.1591] ------------------------------------------------------
[6.1599] kswapd0/117 is trying to acquire lock:
[6.1606] ffff8d9b6333c5b8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1625]
but task is already holding lock:
[6.1633] ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60
[6.1646]
which lock already depends on the new lock.
[6.1657]
the existing dependency chain (in reverse order) is:
[6.1667]
-> #2 (fs_reclaim){+.+.}-{0:0}:
[6.1677] fs_reclaim_acquire+0x9d/0xd0
[6.1685] __kmalloc_cache_noprof+0x59/0x750
[6.1694] btrfs_init_file_extent_tree+0x90/0x100
[6.1702] btrfs_read_locked_inode+0xc3/0x6b0
[6.1710] btrfs_iget+0xbb/0xf0
[6.1716] btrfs_lookup_dentry+0x3c5/0x8e0
[6.1724] btrfs_lookup+0x12/0x30
[6.1731] lookup_open.isra.0+0x1aa/0x6a0
[6.1739] path_openat+0x5f7/0xc60
[6.1746] do_filp_open+0xd6/0x180
[6.1753] do_sys_openat2+0x8b/0xe0
[6.1760] __x64_sys_openat+0x54/0xa0
[6.1768] do_syscall_64+0x97/0x3e0
[6.1776] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[6.1784]
-> #1 (btrfs-tree-00){++++}-{3:3}:
[6.1794] lock_release+0x127/0x2a0
[6.1801] up_read+0x1b/0x30
[6.1808] btrfs_search_slot+0x8e0/0xff0
[6.1817] btrfs_lookup_inode+0x52/0xd0
[6.1825] __btrfs_update_delayed_inode+0x73/0x520
[6.1833] btrfs_commit_inode_delayed_inode+0x11a/0x120
[6.1842] btrfs_log_inode+0x608/0x1aa0
[6.1849] btrfs_log_inode_parent+0x249/0xf80
[6.1857] btrfs_log_dentry_safe+0x3e/0x60
[6.1865] btrfs_sync_file+0x431/0x690
[6.1872] do_fsync+0x39/0x80
[6.1879] __x64_sys_fsync+0x13/0x20
[6.1887] do_syscall_64+0x97/0x3e0
[6.1894] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[6.1903]
-> #0 (&delayed_node->mutex){+.+.}-{3:3}:
[6.1913] __lock_acquire+0x15e9/0x2820
[6.1920] lock_acquire+0xc9/0x2d0
[6.1927] __mutex_lock+0xcc/0x10a0
[6.1934] __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1944] btrfs_evict_inode+0x20b/0x4b0
[6.1952] evict+0x15a/0x2f0
[6.1958] prune_icache_sb+0x91/0xd0
[6.1966] super_cache_scan+0x150/0x1d0
[6.1974] do_shrink_slab+0x155/0x6f0
[6.1981] shrink_slab+0x48e/0x890
[6.1988] shrink_one+0x11a/0x1f0
[6.1995] shrink_node+0xbfd/0x1320
[6.1002] balance_pgdat+0x67f/0xc60
[6.1321] kswapd+0x1dc/0x3e0
[6.1643] kthread+0xff/0x240
[6.1965] ret_from_fork+0x223/0x280
[6.1287] ret_from_fork_asm+0x1a/0x30
[6.1616]
other info that might help us debug this:
[6.1561] Chain exists of:
&delayed_node->mutex --> btrfs-tree-00 --> fs_reclaim
[6.1503] Possible unsafe locking scenario:
[6.1110] CPU0 CPU1
[6.1411] ---- ----
[6.1707] lock(fs_reclaim);
[6.1998] lock(btrfs-tree-00);
[6.1291] lock(fs_reclaim);
[6.1581] lock(&delayed_node->mutex);
[6.1874]
*** DEADLOCK ***
[6.1716] 2 locks held by kswapd0/117:
[6.1999] #0: ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60
[6.1294] #1: ffff8d998344b0e0 (&type->s_umount_key#40){++++}- {3:3}, at: super_cache_scan+0x37/0x1d0
[6.1596]
stack backtrace:
[6.1183] CPU: 11 UID: 0 PID: 117 Comm: kswapd0 Tainted: G U 6.18.0+ #4 PREEMPT(lazy)
[6.1185] Tainted: [U]=USER
[6.1186] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[6.1187] Call Trace:
[6.1187] <TASK>
[6.1189] dump_stack_lvl+0x6e/0xa0
[6.1192] print_circular_bug.cold+0x17a/0x1c0
[6.1194] check_noncircular+0x175/0x190
[6.1197] __lock_acquire+0x15e9/0x2820
[6.1200] lock_acquire+0xc9/0x2d0
[6.1201] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1204] __mutex_lock+0xcc/0x10a0
[6.1206] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1208] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1211] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1213] __btrfs_release_delayed_node.part.0+0x39/0x2f0
[6.1215] btrfs_evict_inode+0x20b/0x4b0
[6.1217] ? lock_acquire+0xc9/0x2d0
[6.1220] evict+0x15a/0x2f0
[6.1222] prune_icache_sb+0x91/0xd0
[6.1224] super_cache_scan+0x150/0x1d0
[6.1226] do_shrink_slab+0x155/0x6f0
[6.1228] shrink_slab+0x48e/0x890
[6.1229] ? shrink_slab+0x2d2/0x890
[6.1231] shrink_one+0x11a/0x1f0
[6.1234] shrink_node+0xbfd/0x1320
[6.1236] ? shrink_node+0xa2d/0x1320
[6.1236] ? shrink_node+0xbd3/0x1320
[6.1239] ? balance_pgdat+0x67f/0xc60
[6.1239] balance_pgdat+0x67f/0xc60
[6.1241] ? finish_task_switch.isra.0+0xc4/0x2a0
[6.1246] kswapd+0x1dc/0x3e0
[6.1247] ? __pfx_autoremove_wake_function+0x10/0x10
[6.1249] ? __pfx_kswapd+0x10/0x10
[6.1250] kthread+0xff/0x240
[6.1251] ? __pfx_kthread+0x10/0x10
[6.1253] ret_from_fork+0x223/0x280
[6.1255] ? __pfx_kthread+0x10/0x10
[6.1257] ret_from_fork_asm+0x1a/0x30
[6.1260] </TASK>
This is because:
1) The fsync task is holding an inode's delayed node mutex (for a
directory) while calling __btrfs_update_delayed_inode() and that needs
to do a search on the subvolume's btree (therefore read lock some
extent buffers);
2) The lookup task, at btrfs_lookup(), triggered reclaim with the
GFP_KERNEL allocation done by btrfs_init_file_extent_tree() while
holding a read lock on a subvolume leaf;
3) The reclaim triggered kswapd which is doing inode eviction for the
directory inode the fsync task is using as an argument to
btrfs_commit_inode_delayed_inode() - but in that call chain we are
trying to read lock the same leaf that the lookup task is holding
while calling btrfs_init_file_extent_tree() and doing the GFP_KERNEL
allocation.
Fix this by calling btrfs_init_file_extent_tree() after we don't need the
path anymore and release it in btrfs_read_locked_inode().
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/linux-btrfs/6e55113a22347c3925458a5d840a18401a38b276.camel@linux.intel.com/
Fixes: 8679d2687c ("btrfs: initialize inode::file_extent_tree after i_mode has been set")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[POTENTIAL BUG]
If the system page size is 4K and fs block size is 8K, and max_inline
mount option is set to 6K, we can inline a 6K sized data extent.
Then a encoded write submitted a compressed extent which is at file
offset 0, and the compressed length is 6K, which is allowed to be inlined.
Now a read beyond page boundary is triggered inside write_extent_buffer()
from insert_inline_extent().
[CAUSE]
Currently the function __cow_file_range_inline() can only accept a
single folio.
For regular compressed write path, we always allocate the compressed
folios using the minimal order matching the block size, thus the
@compressed_folio should always cover a full fs block thus it is fine.
But for encoded writes, they allocate page size folios, this means we
can hit a case where the compressed data is smaller than block size but
still larger than page size, in that case __cow_file_range_inline() will
be called with @compressed_size larger than a page.
In that case we will trigger a read beyond the folio inside
insert_inline_extent().
Thankfully this is not that common, as the default max_inline is only
2048 bytes, smaller than PAGE_SIZE, and bs > ps support is still
experimental.
[FIX]
We need to either allow insert_inline_extent() to accept a page array to
properly support such case, or reject such inline extent.
The latter is a much simpler solution, and considering bs > ps will stay
as a corner case and non-default max_inline will be even rarer, I don't
think we really need to fulfill such niche.
So just reject any inline extent that's larger than PAGE_SIZE, and add
an extra ASSERT() to insert_inline_extent() to catch such beyond-boundary
access.
Fixes: ec20799064 ("btrfs: enable encoded read/write/send for bs > ps cases")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
prestera_ldr_wait_buf() returns the result of readl_poll_timeout(),
which is 0 on success or -ETIMEDOUT on failure. Its current return
type is u32.
Assigning this u32 value to an int variable works today because the
bit pattern of (u32)-ETIMEDOUT (0xffffff92) is correctly interpreted
as -ETIMEDOUT when stored in an int. However, keeping the function
return type as u32 is misleading and fragile.
Change the return type to int to reflect the actual semantic of
returning negative error codes and to avoid potential issues with
unsigned casts. There is no functional change.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260103174313.1172197-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Interrupts work just like on MT7988.
Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260102113222.3519900-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the current moment, the logs for martian packets are as follows:
```
martian source {DST} from {SRC}, on dev {DEV}
martian destination {DST} from {SRC}, dev {DEV}
```
These messages feel rather hard to understand in production, especially
the "martian source" one, mostly because it is grammatically ambitious
to parse which part is now the source address and which part is the
destination address. For example, "{DST}" may there be interpreted as
the actual source address due to following the word "source", thereby
implying the actual source address to be the destination one.
Personally, I discovered this bug while toying around with TUN
interfaces and using them as a tunnel (receiving packets via a TUN
interface and sending them over a TCP stream; receiving packets from a
TCP stream and writing them to a TUN).[^1]
When these IP addresses contained local IPs (i.e. 10.0.0.0/8 in source
and destination), everything worked fine. However, sending them to a
real routable IP address on the internet led to them being treated as a
martian packet, obviously. Using a few sysctl(8) and iptables(8)
settings[^2] fixed it, but while debugging I found the log message
starting with "martian source" rather confusing, as I was unsure on
whether the packet that gets dropped was the packet originating from me
or the response from the endpoint, as "martian source <ROUTABLE IP>"
could also be falsely interpreted as the response packet being martian,
due to the word "source" followed by the routable IP address, implying
the source address of that packet is set to this IP, as explained above.
In the end, I had to look into the source code of the kernel on where
this error message gets generated, which is usually an indicator of
there being room for improvement with regard to this error message.
In terms of improvement, this commit changes the error messages for
martian source and martian destination packets as follows:
```
martian source (src={SRC}, dst={DST}, dev={DEV})
martian destination (src={SRC}, dst={DST}, dev={DEV})
```
These new wordings leave pretty much no room for ambiguity as all
parameters are prefixed with a respective key explaining their semantic
meaning.
See also the following thread on LKML.[^3]
[^1]: <https://backreference.org/2010/03/26/tuntap-interface-tutorial>
[^2]: sysctl net.ipv4.ip_forward=1 && \
iptables -A INPUT -i tun0 -j ACCEPT && \
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
[^3]: <https://lore.kernel.org/all/aSd4Xj8rHrh-krjy@4944566b5c925f79/>
Signed-off-by: Clara Engler <cve@cve.cx>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260101125114.2608-1-cve@cve.cx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michal Luczaj says:
====================
vsock: Fix SO_ZEROCOPY on accept()ed vsocks
vsock has its own handling of setsockopt(SO_ZEROCOPY). Which works just
fine unless socket comes from a call to accept(). Because
SOCK_CUSTOM_SOCKOPT flag is missing, attempting to set the option always
results in errno EOPNOTSUPP.
====================
Link: https://patch.msgid.link/20251229-vsock-child-sock-custom-sockopt-v2-0-64778d6c4f88@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up some left overs of refactoring io_uring into multiple files.
Compile tested with a few configurations.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The is_non_negative() and is_negative() function-like macros just
exist as a workaround to silence the -Wtype-limits warning. Now that
this warning is disabled, those two macros have lost their raison
d'être. Remove them.
This reverts commit dc7fe518b0 ("overflow: Fix -Wtype-limits
compilation warnings").
Suggested-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/all/aUT_yWin_xslnOFh@derry.ads.avm.de
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251220-remove_wtype-limits-v3-3-24b170af700e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Now that -Wtype-limits is globally deactivated, there is no need for
local exceptions anymore.
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251220-remove_wtype-limits-v3-2-24b170af700e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
W=2 builds are heavily polluted by the -Wtype-limits warning.
Here are some W=12 statistics on Linux v6.19-rc1 for an x86_64
defconfig (with just CONFIG_WERROR set to "n") using gcc 14.3.1:
Warning name count percent
-------------------------------------------------
-Wlogical-op 2 0.00 %
-Wmaybe-uninitialized 138 0.20 %
-Wunused-macros 869 1.24 %
-Wmissing-field-initializers 1418 2.02 %
-Wshadow 2234 3.19 %
-Wtype-limits 65378 93.35 %
-------------------------------------------------
Total 70039 100.00 %
As we can see, -Wtype-limits represents the vast majority of all
warnings. The reason behind this is that these warnings appear in
some common header files, meaning that some unique warnings are
repeated tens of thousands of times (once per header inclusion).
Add to this the fact that each warning is coupled with a dozen lines
detailing some macro expansion. The end result is that the W=2 output
is just too bloated and painful to use.
Three years ago, I proposed in [1] modifying one such header to
silence that noise. Because the code was not faulty, Linus rejected
the idea and instead suggested simply removing that warning.
At that time, I could not bring myself to send such a patch because,
despite its problems, -Wtype-limits would still catch the below bug:
unsigned int ret;
ret = check();
if (ret < 0)
error();
Meanwhile, based on another suggestion from Linus, I added a new check
to sparse [2] that would catch the above bug without the useless spam.
With this, remove gcc's -Wtype-limits. People who still want to catch
incorrect comparisons between unsigned integers and zero can now use
sparse instead.
On a side note, clang also has a -Wtype-limits warning but:
* it is not enabled in the kernel at the moment because, contrary to
gcc, clang did not include it under -Wextra.
* it does not warn if the code results from a macro expansion. So,
if activated, it would not cause as much spam as gcc does.
* -Wtype-limits is split into four sub-warnings [3] meaning that if
it were to be activated, we could select which one to keep.
So there is no present need to explicitly disable -Wtype-limits in
clang.
[1] linux/bits.h: GENMASK_INPUT_CHECK: reduce W=2 noise by 31% treewide
Link: https://lore.kernel.org/all/20220308141201.2343757-1-mailhol.vincent@wanadoo.fr/
[2] Warn about "unsigned value that used to be signed against zero"
Link: https://lore.kernel.org/all/20250921061337.3047616-1-mailhol@kernel.org/
[3] clang's -Wtype-limits
Link: https://clang.llvm.org/docs/DiagnosticsReference.html#wtype-limits
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251220-remove_wtype-limits-v3-1-24b170af700e@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
When transitioning to D3cold, __pci_set_power_state() first transitions to
D3hot. If the device was already in D3hot, this adds excess work:
(a) read/modify/write PMCSR; and
(b) excess delay (pci_dev_d3_sleep()).
For (b), we already performed the necessary delay on the previous D3hot
entry; this was extra noticeable when evaluating runtime PM transition
latency.
Check whether we're already in the target state before continuing.
Note that __pci_set_power_state() already does this same check for other
state transitions, but D3cold is special because __pci_set_power_state()
converts it to D3hot for the purposes of PMCSR.
This seems to be an oversight in commit 0aacdc9574 ("PCI/PM: Clean up
pci_set_low_power_state()").
Fixes: 0aacdc9574 ("PCI/PM: Clean up pci_set_low_power_state()")
Signed-off-by: Brian Norris <briannorris@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
[bhelgaas: reverse test to match other "dev->current_state == state" cases]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251003154008.1.I7a21c240b30062c66471329567a96dceb6274358@changeid
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Add a basic config to run kunit tests on 32-bit big endian ARM.
Link: https://lore.kernel.org/r/20260102-kunit-armeb-v1-1-e8e5475d735c@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The only use of this helper is to iterate all of the workers, and
hence all callers will pass in a func that always returns false to do
that. As none of the callers use the return value, get rid of it.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a subtest itself reports success, but the outer testcase fails,
the whole testcase should be reported as a failure. However the status
is recalculated based on the test counts, overwriting the outer test
result. Synthesize a failed test in this case to make sure the failure
is not swallowed.
Link: https://lore.kernel.org/r/20251230-kunit-nested-failure-v1-2-98cfbeb87823@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently there is a lack of tests validating the result reporting from
nested tests. Add one, it will also be used to validate upcoming changes
to the nested test parsing.
Link: https://lore.kernel.org/r/20251230-kunit-nested-failure-v1-1-98cfbeb87823@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, kunit.py ignores the KBUILD_OUTPUT env variable and always
defaults to .kunit in the working directory. This behavior is inconsistent
with standard Kbuild behavior, where KBUILD_OUTPUT defines the build
artifact location.
This patch modifies kunit.py to respect KBUILD_OUTPUT if set. A .kunit
subdirectory is created inside KBUILD_OUTPUT to avoid polluting the build
directory.
Link: https://lore.kernel.org/r/20260106-kunit-kbuild_output-v2-1-582281797343@gmail.com
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
[Why]
Query for VPE block_type and ip_count is missing.
[How]
Add VPE case in ip_block_type and hw_ip_count query.
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a6ea0a430a)
Cc: stable@vger.kernel.org
Apparently the DAC encoder needs to be set up before use.
The BIOS parser in DC did not support this so I assumed it was
not necessary, but the DAC doesn't work without it on some GPUs.
Fixes: 69b29b8946 ("drm/amd/display: Hook up DAC to bios_parser_encoder_control")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bb5dfe2f56)
Replace the NULL checks with IS_ERR_OR_NULL() in
KUNIT_BINARY_STR_ASSERTION() to prevent the strcmp() faulting if a
passed pointer is an ERR_PTR.
Commit 7ece381aa7 ("kunit: Protect string comparisons against NULL")
added the checks for NULL on both pointers so that asserts would fail,
instead of faulting, if either pointer is NULL. But either pointer
could hold an ERR_PTR value.
This assumes that the assertion is expecting both strings to be valid,
and is asserting the equality of their _content_.
Link: https://lore.kernel.org/r/20251219161212.1648076-1-rf@opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In the internal cmp function, a const pointer is cast out to a non-const
pointer by using container_of(). This is probably not what is intended
at all, so fix up the const marking to properly preserve what is really
happening (i.e. the const should flow through the container_of() call)
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/all/2025121751-backtrack-manifesto-7c57@gregkh/#r
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In many kunit assert functions a const pointer is passed to
container_of() and out pops a non-const pointer, which really isn't the
correct thing to do at all. Fix this up by correctly marking the
casted-to pointer as const to preserve the marking.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <raemoar63@gmail.com>
Cc: linux-kselftest@vger.kernel.org
Cc: kunit-dev@googlegroups.com
Link: https://lore.kernel.org/r/2025121746-result-staleness-5a68@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a devicetree for The Fairphone (Gen. 6) smartphone, which is based
on the Milos/SM7635 SoC.
Supported functionality as of this initial submission:
* Debug UART
* Regulators (PM7550, PM8550VS, PMR735B, PM8008)
* Remoteprocs (ADSP, CDSP, MPSS, WPSS)
* Power Button, Volume Keys, Switch
* PMIC-GLINK (Charger, Fuel gauge, USB-C mode switching)
* Camera flash/torch LED
* SD card
* USB
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251210-sm7635-fp6-initial-v4-9-b05fddd8b45c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a devicetree description for the Milos SoC, which is for example
Snapdragon 7s Gen 3 (SM7635).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251210-sm7635-fp6-initial-v4-8-b05fddd8b45c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a dts for the PMIC used e.g. with Milos SoC-based devices.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251210-sm7635-fp6-initial-v4-6-b05fddd8b45c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Keep the different PMIC definitions in pm8550vs.dtsi disabled by
default, and only enable them in boards explicitly.
This allows to support boards better which only have pm8550vs_c, like
the Milos/SM7635-based Fairphone (Gen. 6).
Note: I assume that at least some of these devices with PM8550VS also
don't have _c, _d, _e and _g, but this patch is keeping the resulting
devicetree the same as before this change, disabling them on boards that
don't actually have those is out of scope for this patch.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251210-sm7635-fp6-initial-v4-5-b05fddd8b45c@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pass the correct enum values as expected by the VBIOS.
Previously the actual bit depth integer value was passed,
which was a mistake.
Fixes: 7fb4f254c8 ("drm/amd/display: Add SelectCRTC_Source to BIOS parser")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cdf6e4c0cd)
ISP mfd child devices are using genpd and the system suspend-resume
operations between genpd and amdgpu parent device which uses only
runtime suspend-resume are not in sync.
Linux power manager during suspend-resume resuming the genpd devices
earlier than the amdgpu parent device. This is resulting in the below
warning as SMU is in suspended state when genpd attempts to resume ISP.
WARNING: CPU: 13 PID: 5435 at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:398 smu_dpm_set_power_gate+0x36f/0x380 [amdgpu]
To fix this warning isp suspend-resume is handled as part of amdgpu
parent device suspend-resume instead of genpd sequence. Each ISP MFD
child device is marked as dev_pm_syscore_device to skip genpd
suspend-resume and use pm_runtime_force api's to suspend-resume
the devices when callbacks from amdgpu are received.
Co-developed-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Gjorgji Rosikopulos <grosikop@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0288a345f1)
If when we backup the ring contents for reemit before a
ring reset, we skip jobs associated with the bad
context, however, we need to make sure the fences
are reemited as unprocessed submissions may depend on
them.
v2: clean up fence handling, make helpers static
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 155a748f14)
If we cancel a bad job and reemit the ring contents, and
we get another timeout, cancel everything rather than reemitting.
The wptr markers are only relevant for the original emit. If
we reemit, the wptr markers are no longer correct.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fb62a2067c)
v1:
the PMFW didn't initialize the PCIe DPM parameters
and requires the KMD to actively provide these parameters.
v2:
clean & remove unused code logic (lijo)
Fixes: 1a18607c07 ("drm/amd/pm: override pcie dpm parameters only if it is necessary")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4671
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b0dbd5db7c)
