As EFI runtime services can now be run without disabling preemption remove
the check for non preemptible in current_in_efi(). Without this change,
firmware errors that were previously recovered from by
__efi_runtime_kernel_fixup_exception() will lead to a kernel oops.
Fixes: a5baf582f4 ("arm64/efi: Call EFI runtime services without disabling preemption")
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The "label" property is not documented for the dlg,slg7xl45106. Nor is
it common to use for GPIO controllers. So drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20251216175914.2791200-1-robh@kernel.org
Since LLVM commit 39e30508a7f6 ("[Driver][Sparc] Default to -mcpu=v9 for
32-bit Linux/sparc64 (#109278)"), clang defaults to -mcpu=v9 for 32-bit
SPARC builds. -mcpu=v9 generates instructions which are not recognized
by qemu-sparc and qemu-system-sparc.
Explicitly enforce -mcpu=v8 to generate compatible code.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260106-nolibc-sparc32-fix-v2-1-7c5cd6b175c2@weissschuh.net
The Everest ES8316 has interrupt capability on its GPIO3 pin for
headphone detection. Several of the RockPi 4 variants are using it
already.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260105193203.3166320-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the generic variants of sys_fork() and sys_vfork() differ in
both they precedence of used system calls and the usage of sys_clone()
vs sys_clone3(). While the interface of clone3() in sys_vfork() is more
consistent over different architectures, qemu-user does not support it,
making testing harder. We already handle the different clone()
interfaces for sys_fork() in the architecture-specific headers, and can
do so also for sys_vfork(). In fact SPARC already has such handling and
only s390 is currently missing.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260104-nolibc-vfork-v1-1-a63464b9e4e6@weissschuh.net
This logic was added in commit 850fad7de8 ("selftests/nolibc: allow
test -include /path/to/nolibc.h") to allow the testing of -include
/path/to/nolibc.h. As it requires as special variable to activate, this
code is nearly never used. Furthermore it complicates the logic a bit.
Since commit a6a054c8ad ("tools/nolibc: add target to check header
usability") and commit 443c6467fc ("selftests/nolibc: always run
nolibc header check") the usability of -include /path/to/nolibc.h is
always checked anyways, making NOLIBC_SYSROOT=0 pointless.
Drop the special logic.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260104-nolibc-nolibc_sysroot-v1-1-98025ad99add@weissschuh.net
The nolibc system call wrappers expect the libc types to be compatible
to the kernel types.
Make sure these expectations hold at compile-time.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-14-c662992f75d7@weissschuh.net
Some upcoming logic needs to depend on the version of GCC or clang.
Add some helper macros to keep the conditionals readable.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-12-c662992f75d7@weissschuh.net
Now that 'struct timespec' and 'struct __kernel_timespec' are
compatible, the conversions are not necessary anymore.
The same holds true for 'struct itimerspec' and 'struct
__kernel_itimerspec'.
Remove the conversions.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-11-c662992f75d7@weissschuh.net
Keeping 'struct timespec' and 'struct __kernel_timespec' compatible
allows the source code to stay simple.
Validate that the types stay compatible.
The test is specific to nolibc and does not compile on other libcs, so
skip it there.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251220-nolibc-uapi-types-v3-10-c662992f75d7@weissschuh.net
Remove SYSCTL_INT_CONV_CUSTOM and replace it with proc_int_conv. This
converter function expects a negp argument as it can take on negative
values. Update all jiffies converters to use explicit function calls.
Remove SYSCTL_CONV_IDENTITY as it is no longer used.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Replace SYSCTL_USER_TO_KERN_INT_CONV and SYSCTL_KERN_TO_USER_INT_CONV
macros with function implementing the same logic.This makes debugging
easier and aligns with the functions preference described in
coding-style.rst. Update all jiffies converters to use explicit function
implementations instead of macro-generated versions.
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Historically four function declarations remain orphaned or duplicated.
Remove them to keep the source clean.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/r/20251012071133.290225-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Replace sprintf() with sysfs_emit() in sysfs show functions. The
sysfs_emit() function is the preferred way to format sysfs output as
it ensures proper buffer bounds checking and correct return values.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251230124516.229125-3-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace unbounded sprintf() calls with scnprintf() to prevent potential
buffer overflows when formatting device names. While the current format
strings cannot overflow the buffer, using scnprintf() follows kernel
best practices for string formatting.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251230124516.229125-2-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There's no need to calculate HHI_HDMI_PLL_CNTL + 8 when we have a
HHI_HDMI_PLL_CNTL3 macro that has the correct offset already. No
functional changes, this makes it easier to compare the driver with the
datasheets.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20260105204710.447779-4-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
GXBB has the HDMI PLL OD in the HHI_HDMI_PLL_CNTL2 register while for
G12A/G12B/SM1 the OD has moved to HHI_HDMI_PLL_CNTL0. At first glance
the rest of the OD setup seems identical.
However, looking at the downstream kernel sources as well as testing
shows that G12A/G12B/SM1 only supports three OD values:
- register value 0 means: divide by 1
- register value 1 means: divide by 2
- register value 2 means: divide by 4
Downstream sources are also only using OD register values 0, 1 and 2
for G12A/G12B/SM1 (while for GXBB the downstream kernel sources are also
using value 3 which means: divide by 8).
Add clk_div_table and have it replace the CLK_DIVIDER_POWER_OF_TWO flag
to make the kernel's view of this register match with how the hardware
actually works.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20260105204710.447779-3-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
GXBB has the HDMI PLL OD in the HHI_HDMI_PLL_CNTL2 register while for
GXL/GXM the OD has moved to HHI_HDMI_PLL_CNTL3. At first glance the rest
of the OD setup seems identical.
However, looking at the downstream kernel sources as well as testing
shows that GXL only supports three OD values:
- register value 0 means: divide by 1
- register value 1 means: divide by 2
- register value 2 means: divide by 4
Using register value 3 (which on GXBB means: divide by 8) still divides
by 4 as verified using meson-clk-measure. Downstream sources are also
only using OD register values 0, 1 and 2 for GXL (while for GXBB the
downstream kernel sources are also using value 3).
Add clk_div_table and have it replace the CLK_DIVIDER_POWER_OF_TWO flag
to make the kernel's view of this register match with how the hardware
actually works.
Fixes: 69d9229327 ("clk: meson: add the gxl hdmi pll")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20260105204710.447779-2-martin.blumenstingl@googlemail.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
This commit cleans up the following checks flagged by checkpatch in
yogabook.c:
- CHECK: Prefer kernel type 'u8' over 'uint8_t'
- CHECK: Comparison to NULL could be written "!data"
- CHECK: line length of ... exceeds 100 columns
Signed-off-by: Benjamin Philip <benjamin.philip495@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260101141657.54258-1-benjamin.philip495@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy(). No functional changes.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260105145045.52764-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The "select" schema is not necessary because "syscon" compatible is already
excluded from the default select logic.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260105212858.3454174-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The cci_update_bits() inside ov02c10_set_ctrl() can use the passed
data in the ctrl argument to access the vflip control value.
After changing this there is no need to store a pointer to the hflip
and vflip controls inside struct ov02c10, drop these.
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org> # T14s Gen6 Snapdragon
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Dell XPS 13 9350 and XPS 16 9640 both have an upside-down mounted
OV02C10 sensor. This rotation of 180° is reported in neither the SSDB nor
the _PLD for the sensor (both report a rotation of 0°).
Add a DMI quirk mechanism for upside-down sensors and add 2 initial entries
to the DMI quirk list for these 2 laptops.
Note the OV02C10 driver was originally developed on a XPS 16 9640 which
resulted in inverted vflip + hflip settings making it look like the sensor
was upright on the XPS 16 9640 and upside down elsewhere this has been
fixed in commit d5ebe3f7d1 ("media: ov02c10: Fix default vertical flip").
This makes this commit a regression fix since now the video is upside down
on these Dell XPS models where it was not before.
Fixes: d5ebe3f7d1 ("media: ov02c10: Fix default vertical flip")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
During sensor calibration I noticed that with the hflip control set to
false/disabled the image was mirrored.
The horizontal flip control is inverted and needs to be set to 1 to not
flip. This is something which seems to be common with various recent
Omnivision sensors, the ov01a10 and ov08x40 also have an inverted
mirror control.
Invert the hflip control to fix the sensor mirroring by default.
Fixes: b7cd2ba3f6 ("media: ov02c10: Support hflip and vflip")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org> # T14s Gen6 Snapdragon
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The ov02c10 is capable of having its (crop) window shifted around with 1
pixel precision while streaming.
This allows changing the x/y window coordinates when changing flipping to
preserve the bayer-pattern.
__v4l2_ctrl_handler_setup() will now write the window coordinates at 0x3810
and 0x3812 so these can be dropped from sensor_1928x1092_30fps_setting.
Since the bayer-pattern is now unchanged, the V4L2_CTRL_FLAG_MODIFY_LAYOUT
flag can be dropped from the flip controls.
Note the original use of the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag was
incomplete, besides setting the flag the driver should also have reported
a different mbus code when getting the source pad's format depending on
the hflip / vflip settings see the ov2680.c driver for example.
Fixes: b7cd2ba3f6 ("media: ov02c10: Support hflip and vflip")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org> # T14s Gen6 Snapdragon
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
After commit d5ebe3f7d1 ("media: ov02c10: Fix default vertical flip")
the reported bayer-pattern of MEDIA_BUS_FMT_SGRBG10_1X10 is no longer
correct.
Change the 16-bit x-win register (0x3810) value from 2 to 1 so that
the sensor will generate data in GRBG bayer-order again.
Fixes: d5ebe3f7d1 ("media: ov02c10: Fix default vertical flip")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CRU version on the RZ/V2H SoC supports larger input sizes
(4096x4096) compared to the version on the RZ/G2L (2800x4095).
Store the per-SoC min/max sizes in the device match info and use them
in place of the hardcoded ones.
While at it, use the min sizes reported by the info structure to replace
the RZG2L_CSI2_DEFAULT_WIDTH/HEIGHT macros.
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver uses the v4l2-isp framework, which defines its own
versioning number which does not need to be defined again in each
platform-specific header.
Remove the definition of mali_c55_param_buffer_version enumeration from
the Mali C55 uAPI header.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver uses the v4l2-isp framework, which performs
validation of the parameters buffer versioning in the
v4l2_isp_params_validate_buffer() function.
It is not necessary to replicate the validation of the parameters buffer
versioning in the platform-specific implementation.
Remove it.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver uses the v4l2-isp framework, which defines its own
versioning numbers.
Do not use the Mali C55 specific version identifier in the code example
in the documentation of the Mali C55 stats and params metadata formats.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some systems ship with multiple display class devices but not all
of them are VGA devices. If the "only" VGA device on the system is not
used for displaying the image on the screen marking it as `boot_vga`
because nothing was found is totally wrong.
This behavior actually leads to mistakes of the wrong device being
advertised to userspace and then userspace can make incorrect decisions.
As there is an accurate `boot_display` sysfs file stop lying about
`boot_vga` by assuming if nothing is found it's the right device.
Reported-by: Aaron Erhardt <aer@tuxedocomputers.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220712
Tested-by: Aaron Erhardt <aer@tuxedocomputers.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: ad90860bd1 ("fbcon: Use screen info to find primary device")
Tested-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106044638.52906-1-superm1@kernel.org
The Qualcomm SA8775P platform comes with 2 DisplayPort controllers
for each mdss. Update controller id for DPTX0 and DPTX1 of mdss1.
Fixes: dcb380d19e ("drm/msm/dp: Add DisplayPort controller for SA8775P")
Signed-off-by: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/690234/
Link: https://lore.kernel.org/r/20251125105622.1755651-2-quic_mkuntuma@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The MSM DRM driver currently does not support panels which report their
supported link rates via the SUPPORTED_LINK_RATES table.
For panels which do not offer the optional eDP v1.3 fallback via
MAX_LINK_RATE, this will cause a panel probe failure (e.g. Samsung
ATNA30DW01-1 as found in Microsoft Surface Pro 11).
Detect eDP v1.4 panels and parse the SUPPORTED_LINK_RATES table when
present.
Additionally, set the rate using LINK_RATE_SET instead of LINK_BW_SET,
but only if LINK_BW_SET hasn't already been written to.
Signed-off-by: Dale Whinham <daleyo@gmail.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Tested-by: Steev Klimaszewski <threeway@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/695064/
Link: https://lore.kernel.org/r/20251218-drm-msm-edp14-v2-1-2e56c2338ab1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Since DPU 8.x Watchdog timer settings were moved from the TOP to the
INTF block. Support programming the timer in the INTF block. Fixes tag
points to the commit which removed register access to those registers on
DPU 8.x+ (and which also should have added proper support for WD timer
on those devices).
Fixes: 43e3293fc6 ("drm/msm/dpu: add support for MDP_TOP blackhole")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696586/
Link: https://lore.kernel.org/r/20251230-intf-fix-wd-v6-2-98203d150611@oss.qualcomm.com
Since DPU 5.x the vsync source TE setup is split between MDP TOP and
INTF blocks. Currently all code to setup vsync_source is only executed
if MDP TOP implements the setup_vsync_source() callback. However on
DPU >= 8.x this callback is not implemented, making DPU driver skip all
vsync setup. Move the INTF part out of this condition, letting DPU
driver to setup TE vsync selection on all new DPU devices.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Fixes: 2f69e54584 ("drm/msm/dpu: skip watchdog timer programming through TOP on >= SM8450")
[DB: restored top->ops.setup_vsync_source call]
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696584/
Link: https://lore.kernel.org/r/20251230-intf-fix-wd-v6-1-98203d150611@oss.qualcomm.com
On SC7280 targets, display modes with a width greater than the
max_mixer_width (2400) are rejected during mode validation when
merge3d is disabled. This limitation exists because, without a
3D merge block, two layer mixers cannot be combined(non-DSC interface),
preventing large layers from being split across mixers. As a result,
higher resolution modes cannot be supported.
Enable merge3d support on SC7280 to allow combining streams from
two layer mixers into a single non-DSC interface. This capability
removes the width restriction and enables buffer sizes beyond the
2400-pixel limit.
Fixes: 591e34a091 ("drm/msm/disp/dpu1: add support for display for SC7280 target")
Signed-off-by: Mahadevan P <mahadevan.p@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696713/
Link: https://lore.kernel.org/r/20260101-4k-v2-1-712ae3c1f816@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
QCS8300 MDSS DSI controller reuses the same IP as SA8775P, with
identical register layout and programming model. Introduce a
QCS8300-specific compatible with a fallback to
`qcom,sa8775p-dsi-ctrl` to reflect this hardware reuse.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696784/
Link: https://lore.kernel.org/r/20260104134442.732876-3-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
QCS8300 uses the same 5nm MDSS DSI PHY IP as SA8775P, sharing
an identical register layout and programming model. Introduce a
QCS8300-specific compatible with a fallback to `qcom,sa8775p-dsi-phy-5nm`
to reflect this hardware reuse.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/696783/
Link: https://lore.kernel.org/r/20260104134442.732876-2-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The size of this type is architecture specific, and the recommended
way to print it portably is through the custom %pap format string.
Fixes: d6602e2581 ("cxl/region: Add support to indicate region has extended linear cache")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>> ---
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20251204095237.1032528-1-arnd@kernel.org
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Commit 7ffb791423 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
is too narrow. The effect being mitigated in that commit is caused by
ZONE_DEVICE which PCI_P2PDMA has a dependency. ZONE_DEVICE, in general,
lets any physical address be added to the direct-map. I.e. not only ACPI
hotplug ranges, CXL Memory Windows, or EFI Specific Purpose Memory, but
also any PCI MMIO range for the DEVICE_PRIVATE and PCI_P2PDMA cases. Update
the mitigation, limit KASLR entropy, to apply in all ZONE_DEVICE=y cases.
Distro kernels typically have PCI_P2PDMA=y, so the practical exposure of
this problem is limited to the PCI_P2PDMA=n case.
A potential path to recover entropy would be to walk ACPI and determine the
limits for hotplug and PCI MMIO before kernel_randomize_memory(). On
smaller systems that could yield some KASLR address bits. This needs
additional investigation to determine if some limited ACPI table scanning
can happen this early without an open coded solution like
arch/x86/boot/compressed/acpi.c needs to deploy.
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Fixes: 7ffb791423 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Tested-by: Yasunori Goto <y-goto@fujitsu.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://patch.msgid.link/692e08b2516d4_261c1100a3@dwillia2-mobl4.notmuch
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When skb_segment_list() is called during packet forwarding, it handles
packets that were aggregated by the GRO engine.
Historically, the segmentation logic in skb_segment_list assumes that
individual segments are split from a parent SKB and may need to carry
their own socket memory accounting. Accordingly, the code transfers
truesize from the parent to the newly created segments.
Prior to commit ed4cccef64 ("gro: fix ownership transfer"), this
truesize subtraction in skb_segment_list() was valid because fragments
still carry a reference to the original socket.
However, commit ed4cccef64 ("gro: fix ownership transfer") changed
this behavior by ensuring that fraglist entries are explicitly
orphaned (skb->sk = NULL) to prevent illegal orphaning later in the
stack. This change meant that the entire socket memory charge remained
with the head SKB, but the corresponding accounting logic in
skb_segment_list() was never updated.
As a result, the current code unconditionally adds each fragment's
truesize to delta_truesize and subtracts it from the parent SKB. Since
the fragments are no longer charged to the socket, this subtraction
results in an effective under-count of memory when the head is freed.
This causes sk_wmem_alloc to remain non-zero, preventing socket
destruction and leading to a persistent memory leak.
The leak can be observed via KMEMLEAK when tearing down the networking
environment:
unreferenced object 0xffff8881e6eb9100 (size 2048):
comm "ping", pid 6720, jiffies 4295492526
backtrace:
kmem_cache_alloc_noprof+0x5c6/0x800
sk_prot_alloc+0x5b/0x220
sk_alloc+0x35/0xa00
inet6_create.part.0+0x303/0x10d0
__sock_create+0x248/0x640
__sys_socket+0x11b/0x1d0
Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST
packets constructed by GRO, the truesize adjustment is removed.
The call to skb_release_head_state() must be preserved. As documented in
commit cf673ed0e0 ("net: fix fraglist segmentation reference count
leak"), it is still required to correctly drop references to SKB
extensions that may be overwritten during __copy_skb_header().
Fixes: ed4cccef64 ("gro: fix ownership transfer")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260104213101.352887-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the reference to 'boot-image-header.rst', which was moved to
'Documentation/arch/riscv/' in commit 'ed843ae947'
("docs: move riscv under arch").
Signed-off-by: Soham Metha <sohammetha01@gmail.com>
Link: https://patch.msgid.link/20251203194355.63265-1-sohammetha01@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The phrasing of the page-pool-get doc is very confusing.
It's supposed to highlight that support depends on the driver
doing its part but it sounds like orphaned page pools won't
be visible.
The description of the ifindex is completely wrong.
We move the page pool to loopback and skip the attribute if
ifindex is loopback.
Link: https://lore.kernel.org/20260104084347.5de3a537@kernel.org
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260104165232.710460-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These marcos are not used after commit b5b4287acc ("riscv: mm: Use
hint address in mmap if available"). Cleanup VA_USER_XXX definitions
in asm/pgtable.h.
Fixes: b5b4287acc ("riscv: mm: Use hint address in mmap if available")
Signed-off-by: Guo Ren (Alibaba DAMO Academy) <guoren@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20251201005850.702569-1-guoren@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The Zk extension is a bundle consisting of Zkn, Zkr, and Zkt. The Zkn
extension itself is a bundle consisting of Zbkb, Zbkc, Zbkx, Zknd, Zkne,
and Zknh.
The current implementation of riscv_zk_bundled_exts manually listed
the dependencies but missed RISCV_ISA_EXT_ZKNH.
Fix this by introducing a RISCV_ISA_EXT_ZKN macro that lists the Zkn
components and using it in both riscv_zk_bundled_exts and
riscv_zkn_bundled_exts.
This adds the missing Zknh extension to Zk and reduces code duplication.
Fixes: 0d8295ed97 ("riscv: add ISA extension parsing for scalar crypto")
Link: https://patch.msgid.link/20231114141256.126749-4-cleger@rivosinc.com/
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20251223-zk-missing-zknh-v1-1-b627c990ee1a@riscstar.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
