Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.
The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.
wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-5-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion.
Moving the IQ/OQ counter updates before napi_complete_done ensures
1. Counter registers are updated before re-enabling interrupts.
2. Prevents a race where new packets arrive but counters aren't properly
synchronized.
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-4-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.
The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.
wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-3-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Relocate IQ/OQ IN/OUT_CNTS updates to occur before NAPI completion,
and replace napi_complete with napi_complete_done.
Moving the IQ/OQ counter updates before napi_complete_done ensures
1. Counter registers are updated before re-enabling interrupts.
2. Prevents a race where new packets arrive but counters aren't properly
synchronized.
napi_complete_done (vs napi_complete) allows for better
interrupt coalescing.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-2-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiayuan Chen says:
====================
bonding: fix missing XDP compat check on xmit_hash_policy change
syzkaller reported a bug https://syzkaller.appspot.com/bug?extid=5a287bcdc08104bc3132
When a bond device is in 802.3ad or balance-xor mode, XDP is supported
only when xmit_hash_policy != vlan+srcmac. This constraint is enforced
in bond_option_mode_set() via bond_xdp_check(), which prevents switching
to an XDP-incompatible mode while a program is loaded. However, the
symmetric path -- changing xmit_hash_policy while XDP is loaded -- had
no such guard in bond_option_xmit_hash_policy_set().
This means the following sequence silently creates an inconsistent state:
1. Create a bond in 802.3ad mode with xmit_hash_policy=layer2+3.
2. Attach a native XDP program to the bond.
3. Change xmit_hash_policy to vlan+srcmac (no error, not checked).
Now bond->xdp_prog is set but bond_xdp_check() returns false for the
same device. When the bond is later torn down (e.g. netns deletion),
dev_xdp_uninstall() calls bond_xdp_set(dev, NULL) to remove the
program, which hits the bond_xdp_check() guard and returns -EOPNOTSUPP,
triggering a kernel WARNING:
bond1 (unregistering): Error: No native XDP support for the current bonding mode
------------[ cut here ]------------
dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL)
WARNING: net/core/dev.c:10361 at dev_xdp_uninstall net/core/dev.c:10361 [inline], CPU#0: kworker/u8:22/11031
Modules linked in:
CPU: 0 UID: 0 PID: 11031 Comm: kworker/u8:22 Not tainted syzkaller #0 PREEMPT(full)
Workqueue: netns cleanup_net
RIP: 0010:dev_xdp_uninstall net/core/dev.c:10361 [inline]
RIP: 0010:unregister_netdevice_many_notify+0x1efd/0x2370 net/core/dev.c:12393
RSP: 0018:ffffc90003b2f7c0 EFLAGS: 00010293
RAX: ffffffff8971e99c RBX: ffff888052f84c40 RCX: ffff88807896bc80
RDX: 0000000000000000 RSI: 00000000ffffffa1 RDI: 0000000000000000
RBP: ffffc90003b2f930 R08: ffffc90003b2f207 R09: 1ffff92000765e40
R10: dffffc0000000000 R11: fffff52000765e41 R12: 00000000ffffffa1
R13: ffff888052f84c38 R14: 1ffff1100a5f0988 R15: ffffc9000df67000
FS: 0000000000000000(0000) GS:ffff8881254ae000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f60871d5d58 CR3: 000000006c41c000 CR4: 00000000003526f0
Call Trace:
<TASK>
ops_exit_rtnl_list net/core/net_namespace.c:187 [inline]
ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248
cleanup_net+0x56b/0x800 net/core/net_namespace.c:704
process_one_work kernel/workqueue.c:3275 [inline]
process_scheduled_works+0xaec/0x17a0 kernel/workqueue.c:3358
worker_thread+0xa50/0xfc0 kernel/workqueue.c:3439
kthread+0x388/0x470 kernel/kthread.c:467
ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Beyond the WARNING itself, when dev_xdp_install() fails during
dev_xdp_uninstall(), bond_xdp_set() returns early without calling
bpf_prog_put() on the old program. dev_xdp_uninstall() then releases
only the reference held by dev->xdp_state[], while the reference held
by bond->xdp_prog is never dropped, leaking the struct bpf_prog.
The fix refactors the core logic of bond_xdp_check() into a new helper
__bond_xdp_check_mode(mode, xmit_policy) that takes both parameters
explicitly, avoiding the need to read them from the bond struct.
bond_xdp_check() becomes a thin wrapper around it.
bond_option_xmit_hash_policy_set() then uses __bond_xdp_check_mode()
directly, passing the candidate xmit_policy before it is committed,
mirroring exactly what bond_option_mode_set() already does for mode
changes.
Patch 1 adds the kernel fix.
Patch 2 adds a selftest that reproduces the WARNING by attaching native
XDP to a bond in 802.3ad mode, then attempting to change xmit_hash_policy
to vlan+srcmac -- verifying the change is rejected with the fix applied.
====================
Link: https://patch.msgid.link/20260226080306.98766-1-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a selftest to verify that changing xmit_hash_policy to vlan+srcmac
is rejected when a native XDP program is loaded on a bond in 802.3ad
mode. Without the fix in bond_option_xmit_hash_policy_set(), the change
succeeds silently, creating an inconsistent state that triggers a kernel
WARNING in dev_xdp_uninstall() when the bond is torn down.
The test attaches native XDP to a bond0 (802.3ad, layer2+3), then
attempts to switch xmit_hash_policy to vlan+srcmac and asserts the
operation fails. It also verifies the change succeeds after XDP is
detached, confirming the rejection is specific to the XDP-loaded state.
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d59 ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017e ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected.
Reported-by: syzbot+5a287bcdc08104bc3132@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6995aff6.050a0220.2eeac1.014e.GAE@google.com/T/
Fixes: 39a0876d59 ("net, bonding: Disallow vlan+srcmac with XDP")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver sets spec->gen.own_eapd_ctl to take manual control of the
EAPD (External Amplifier). However, senary_init does not turn on the
EAPD, while senary_shutdown turns it off.
Since the generic driver skips EAPD handling when own_eapd_ctl is set,
the EAPD remains off after initialization (e.g., after resume), leaving
the codec in a non-functional state.
Explicitly call senary_auto_turn_eapd in senary_init to ensure the EAPD
is enabled and the codec is functional.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260303081516.583438-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Earlier TEE subsystem assumed to refcount all the memory pages to be
shared with TEE implementation to be refcounted. However, the slab
allocations within the kernel don't allow refcounting kernel pages.
It is rather better to trust the kernel clients to not free pages while
being shared with TEE implementation. Hence, remove refcounting of kernel
pages from register_shm_helper() API.
Fixes: b9c0e49abf ("mm: decline to manipulate the refcount on a slab page")
Reported-by: Marco Felsch <m.felsch@pengutronix.de>
Reported-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Co-developed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Sven Püschel <s.pueschel@pengutronix.de>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
When compiling sched_ext selftests using clang 17.0.6, it raised
compiler crash and build error:
Error at line 68: Unsupport signed division for DAG: 0x55b2f9a60240:
i64 = sdiv 0x55b2f9a609b0, Constant:i64<100>, peek_dsq.bpf.c:68:25 @[
peek_dsq.bpf.c:95:4 @[ peek_dsq.bpf.c:169:8 @[ peek
_dsq.bpf.c:140:6 ] ] ]Please convert to unsigned div/mod
After digging, it's not a compiler error, clang supported Signed division
only when using -mcpu=v4, while we use -mcpu=v3 currently, the better way
is to use unsigned div, see [1] for details.
[1] https://github.com/llvm/llvm-project/issues/70433
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Similar to commit 835a507535 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f4 ("bpftool: Fix build warnings
due to MS extensions")
Fix "declaration does not declare anything" warning by using
-fms-extensions and -Wno-microsoft-anon-tag flags to build bpf programs
that #include "vmlinux.h"
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Similar to commit 835a507535 ("selftests/bpf: Add -fms-extensions to
bpf build flags") and commit 639f58a0f4 ("bpftool: Fix build warnings
due to MS extensions")
The kernel is now built with -fms-extensions, therefore
generated vmlinux.h contains types like:
struct aes_key {
struct aes_enckey;
union aes_invkey_arch inv_k;
};
struct ns_common {
...
union {
struct ns_tree;
struct callback_head ns_rcu;
};
};
Which raise warning like below when building scx scheduler:
tools/sched_ext/build/include/vmlinux.h:50533:3: warning:
declaration does not declare anything [-Wmissing-declarations]
50533 | struct ns_tree;
| ^
Fix it by using -fms-extensions and -Wno-microsoft-anon-tag flags
to build bpf programs that #include "vmlinux.h"
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_watchdog_timeout is written with WRITE_ONCE() in scx_enable():
WRITE_ONCE(scx_watchdog_timeout, timeout);
However, three read-side accesses use plain reads without the matching
READ_ONCE():
/* check_rq_for_timeouts() - L2824 */
last_runnable + scx_watchdog_timeout
/* scx_watchdog_workfn() - L2852 */
scx_watchdog_timeout / 2
/* scx_enable() - L5179 */
scx_watchdog_timeout / 2
The KCSAN documentation requires that if one accessor uses WRITE_ONCE()
to annotate lock-free access, all other accesses must also use the
appropriate accessor. Plain reads alongside WRITE_ONCE() leave the pair
incomplete and can trigger KCSAN warnings.
Note that scx_tick() already uses the correct READ_ONCE() annotation:
last_check + READ_ONCE(scx_watchdog_timeout)
Fix the three remaining plain reads to match, making all accesses to
scx_watchdog_timeout consistently annotated and KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
include/uapi/linux/dma-buf.h uses several macros from ioctl.h to define
its ioctl commands. However, it does not include ioctl.h itself. So,
if userspace source code tries to include the dma-buf.h file without
including ioctl.h, it can result in build failures.
Therefore, include ioctl.h in the dma-buf UAPI header.
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260303002309.1401849-1-isaacmanjarres@google.com
The missing initialization causes driver to misinterpret the EML control bitmap,
resulting in incorrect link bitmap handling.
Fixes: 0d95280a2d ("wifi: mac80211: Add eMLSR/eMLMR action frame parsing support")
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260303054725.471548-1-MeiChia.Chiu@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the hardcoded GPIO node ID (0x01) with codec->core.afg.
This follows the standard HDA driver practice and makes the driver
more robust against different hardware configurations.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260303054242.318062-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, all filesystems that support fsverity (ext4, f2fs, and btrfs)
cache the Merkle tree in the pagecache at a 64K aligned offset after the
end of the file data. This offset needs to be a multiple of the page
size, which is guaranteed only when the page size is 64K or smaller.
64K was chosen to be the "largest reasonable page size". But it isn't
the largest *possible* page size: the hexagon and powerpc ports of Linux
support 256K pages, though that configuration is rarely used.
For now, just disable support for FS_VERITY in these odd configurations
to ensure it isn't used in cases where it would have incorrect behavior.
Fixes: 671e67b47e ("fs-verity: add Kconfig and the helper functions for hashing")
Reported-by: Christoph Hellwig <hch@lst.de>
Closes: https://lore.kernel.org/r/20260119063349.GA643@lst.de
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20260221204525.30426-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Commit 1cc93c48b5 ("selftests/net: packetdrill: remove tests for
tcp_rcv_*big") removed the test for the reverted commit 1d2fbaad7c
("tcp: stronger sk_rcvbuf checks") but also the one for commit
9ca48d616e ("tcp: do not accept packets beyond window").
Restore the test with the necessary adaptation: expect a delayed ACK
instead of an immediate one, since tcp_can_ingest() does not fail
anymore for the last data packet.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Link: https://patch.msgid.link/20260301-tcp_rcv_big_endseq-v1-1-86ab7415ab58@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Function rtl8365mb_phy_ocp_write() always returns 0, even when an error
occurs during register access. This patch fixes the return value to
propagate the actual error code from regmap operations.
Link: https://lore.kernel.org/netdev/a2dfde3c-d46f-434b-9d16-1e251e449068@yahoo.com/
Fixes: 2796728460 ("net: dsa: realtek: rtl8365mb: serialize indirect PHY register access")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260301-realtek_namiltd_fix1-v1-1-43a6bb707f9c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ext4, jbd2, iSCSI, NVMeoF/TCP, and Btrfs stopped using this CRC32c
implementation in commits f2b4fa1964 ("ext4: switch to using the
crc32c library"), dd348f054b ("jbd2: switch to using the crc32c
library"), 92186c1455 ("scsi: iscsi_tcp: Switch to using the
crc32c library"), 427fff9aff ("nvme-tcp: use crc32c() and
skb_copy_and_crc32c_datagram_iter()"), and fe11ac191c ("btrfs:
switch to library APIs for checksums").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f567add7840bc612382237b3e76f3a8bdbd671e6.1772116160.git.geert+renesas@glider.be
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
NFS, Ceph, SMB, and Btrfs stopped using this SHA-256 implementation in
commits c2c90a8b26 ("nfsd: use SHA-256 library API instead of
crypto_shash API"), 27c0a7b05d ("libceph: Use HMAC-SHA256 library
instead of crypto_shash"), 924067ef18 ("ksmbd: Use HMAC-SHA256
library for message signing and key generation"), and fe11ac191c
("btrfs: switch to library APIs for checksums").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/bf8e1c229b36fc5349e29701e962d0dfd4fd21b6.1772116160.git.geert+renesas@glider.be
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a .kunitconfig file to the lib/crypto/ directory so that the crypto
library tests can be run more easily using kunit.py. Example with UML:
tools/testing/kunit/kunit.py run --kunitconfig=lib/crypto
Example with QEMU:
tools/testing/kunit/kunit.py run --kunitconfig=lib/crypto --arch=arm64 --make_options LLVM=1
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260301040140.490310-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
I noticed that neither of the put() operations for the controls defined
by the fsl_easrc driver was flagging value changes properly, fix that.
If an error occurs, the device may not have a current message. In this
case, the system will crash.
In this case, it's better to use dev from the struct ctlr (struct spi_controller*).
Signed-off-by: Vladimir Yakovlev <vovchkir@gmail.com>
Link: https://patch.msgid.link/20260302222017.992228-2-vovchkir@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
[WHY & HOW]
If the dentist is unavailable, fallback to reading CLKIP via the boot
snapshot to get the current dispclk.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ab77600d1)
Cc: stable@vger.kernel.org
This will set DPG flags for enabling power gating on GFX11_5_4
Signed-off-by: sguttula <suresh.guttula@amd.com>
Reviewed-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a503c266d7)
[WHAT]
Create DEGAMMA properties even if color pipeline is enabled, and enforce
the mutual exclusion in atomic check by rejecting any commit that
attempts to enable both COLOR_PIPELINE on the plane and DEGAMMA_LUT on
the CRTC simultaneously.
Fixes: 18a4127e93 ("drm/amd/display: Disable CRTC degamma when color pipeline is enabled")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4963
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 196a6aa727)
[WHAT]
New ASIC's 3D LUT is indicated by mpc.preblend.
Fixes: 0de2b1afea ("drm/amd/display: add 3D LUT colorop")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 43175f6164)
The difference between 'make clean' and 'make mrproper' is documented in
'make help' as:
clean - Remove most generated files but keep the config and
enough build support to build external modules
mrproper - Remove all generated files + config + various backup files
After commit 68b4fe32d7 ("kbuild: Add objtool to top-level clean
target"), running 'make clean' then attempting to build an external
module with the resulting build directory fails with
$ make ARCH=x86_64 O=build clean
$ make -C build M=... MO=...
...
/bin/sh: line 1: .../build/tools/objtool/objtool: No such file or directory
as 'make clean' removes the objtool binary.
Split the objtool clean target into mrproper and clean like Kbuild does
and remove all generated artifacts with 'make clean' except for the
objtool binary, which is removed with 'make mrproper'. To avoid a small
race when running the objtool clean target through both objtool_mrproper
and objtool_clean when running 'make mrproper', modify objtool's clean
up find command to avoid using find's '-delete' command by piping the
files into 'xargs rm -f' like the rest of Kbuild does.
Cc: stable@vger.kernel.org
Fixes: 68b4fe32d7 ("kbuild: Add objtool to top-level clean target")
Reported-by: Michal Suchanek <msuchanek@suse.de>
Closes: https://lore.kernel.org/20260225112633.6123-1-msuchanek@suse.de/
Reported-by: Rainer Fiebig <jrf@mailbox.org>
Closes: https://lore.kernel.org/62d12399-76e5-3d40-126a-7490b4795b17@mailbox.org/
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260227-avoid-objtool-binary-removal-clean-v1-1-122f3e55eae9@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Update the _CPC definition to also support return package sub-type of
a Package (with Integer and Buffer) as per ACPI Spec 6.6.
Link: 17a761944c
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2829238.mvXUDI8C0e@rafael.j.wysocki
Explicitly document the ordering of vcpu->mutex being taken *outside* of
kvm->slots_lock. While somewhat unintuitive since vCPUs conceptually have
narrower scope than VMs, the scope of the owning object (vCPU versus VM)
doesn't automatically carry over to the lock. In this case, vcpu->mutex
has far broader scope than kvm->slots_lock. As Paolo put it, it's a
"don't worry about multiple ioctls at the same time" mutex that's intended
to be taken at the outer edges of KVM.
More importantly, arm64 and x86 have gained flows that take kvm->slots_lock
inside of vcpu->mutex. x86's kvm_inhibit_apic_access_page() is particularly
nasty, as slots_lock is taken quite deep within KVM_RUN, i.e. simply
swapping the ordering isn't an option.
Commit to the vcpu->mutex => kvm->slots_lock ordering, as vcpu->mutex
really is intended to be a "top-level" lock, whereas kvm->slots_lock is
"just" a helper lock.
Opportunistically document that vcpu->mutex is also taken outside of
slots_arch_lock, e.g. when allocating shadow roots on x86 (which is the
entire reason slots_arch_lock exists, as shadow roots must be allocated
while holding kvm->srcu)
kvm_mmu_new_pgd()
|
-> kvm_mmu_reload()
|
-> kvm_mmu_load()
|
-> mmu_alloc_shadow_roots()
|
-> mmu_first_shadow_root_alloc()
but also when manipulating memslots in vCPU context, e.g. when inhibiting
the APIC-access page via the aforementioned kvm_inhibit_apic_access_page()
kvm_inhibit_apic_access_page()
|
-> __x86_set_memory_region()
|
-> kvm_set_internal_memslot()
|
-> kvm_set_memory_region()
|
-> kvm_set_memslot()
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260302170239.596810-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
mgmt_chann may be set to NULL if the firmware returns an unexpected
error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL
pointer dereference in aie2_hw_stop().
Fix this by introducing a dedicated helper to destroy mgmt_chann
and by adding proper NULL checks before accessing it.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260226213857.3068474-1-lizhi.hou@amd.com
If a 'const struct foo __user *ptr' is used for the address passed to
scoped_user_read_access() then you get a warning/error
uaccess.h:691:1: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
for the
void __user *_tmpptr = __scoped_user_access_begin(mode, uptr, size, elbl)
assignment.
Fix by using 'auto' for both _tmpptr and the redeclaration of uptr.
Replace the CLASS() with explicit __cleanup() functions on uptr.
Fixes: e497310b4f ("uaccess: Provide scoped user access regions")
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-and-tested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scx_attr_ops_show() and scx_uevent() access scx_root->ops.name directly.
This is problematic for two reasons:
1. The file-level comment explicitly identifies naked scx_root
dereferences as a temporary measure that needs to be replaced
with proper per-instance access.
2. scx_attr_events_show(), the neighboring sysfs show function in
the same group, already uses the correct pattern:
struct scx_sched *sch = container_of(kobj, struct scx_sched, kobj);
Having inconsistent access patterns in the same sysfs/uevent
group is error-prone.
The kobject embedded in struct scx_sched is initialized as:
kobject_init_and_add(&sch->kobj, &scx_ktype, NULL, "root");
so container_of(kobj, struct scx_sched, kobj) correctly retrieves
the owning scx_sched instance in both callbacks.
Replace the naked scx_root dereferences with container_of()-based
access, consistent with scx_attr_events_show() and in preparation
for proper multi-instance scx_sched support.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_bpf_dsq_nr_queued() reads dsq->nr via READ_ONCE() without holding
any lock, making dsq->nr a lock-free concurrently accessed variable.
However, dsq_mod_nr(), the sole writer of dsq->nr, only uses
WRITE_ONCE() on the write side without the matching READ_ONCE() on the
read side:
WRITE_ONCE(dsq->nr, dsq->nr + delta);
^^^^^^^
plain read -- KCSAN data race
The KCSAN documentation requires that if one accessor uses READ_ONCE()
or WRITE_ONCE() on a variable to annotate lock-free access, all other
accesses must also use the appropriate accessor. A plain read on the
right-hand side of WRITE_ONCE() leaves the pair incomplete and will
trigger KCSAN warnings.
Fix by using READ_ONCE() for the read side of the update:
WRITE_ONCE(dsq->nr, READ_ONCE(dsq->nr) + delta);
This is consistent with scx_bpf_dsq_nr_queued() and makes the
concurrent access annotation complete and KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some of the recent changes to the kunit framework caused the stack usage
for kunit_run_tests() to grow higher than most other kernel functions,
which triggers a warning when CONFIG_FRAME_WARN is set to a relatively
low value:
lib/kunit/test.c: In function 'kunit_run_tests':
lib/kunit/test.c:801:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Split out the inner loop into a separate function to ensure that each
function remains under the limit, and pass the kunit_result_stats
structures by reference to avoid excessive copies.
Fixed checkpatch warnings at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Cc: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
NFSD fixes that arrived too late for the 7.0 merge window.
Fixes for commits merged in 7.0:
- Restore previous nfsd thread count reporting behavior
Issues that need expedient stable backports:
- Fix credential reference leaks in the NFSD netlink admin protocol
-----BEGIN PGP SIGNATURE-----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=kHSn
-----END PGP SIGNATURE-----
Merge tag 'nfsd-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Restore previous nfsd thread count reporting behavior
- Fix credential reference leaks in the NFSD netlink admin protocol
* tag 'nfsd-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: report the requested maximum number of threads instead of number running
nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit().
nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit().
run_kernel() appended KUnit flags directly to the caller-provided args
list. When exec_tests() calls run_kernel() repeatedly (e.g. with
--run_isolated), each call mutated the same list, causing later runs
to inherit stale filter_glob values and duplicate kunit.enable flags.
Fix this by copying args at the start of run_kernel(). Add a regression
test that calls run_kernel() twice with the same list and verifies the
original remains unchanged.
Fixes: ff9e09a376 ("kunit: tool: support running each suite/test separately")
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If `CONFIG_PRINTK` is not set, then the following warnings are issued
during build:
warning: unused variable: `args`
--> ../rust/kernel/kunit.rs:16:12
|
16 | pub fn err(args: fmt::Arguments<'_>) {
| ^^^^ help: if this is intentional, prefix it with an underscore: `_args`
|
= note: `#[warn(unused_variables)]` (part of `#[warn(unused)]`) on by default
warning: unused variable: `args`
--> ../rust/kernel/kunit.rs:32:13
|
32 | pub fn info(args: fmt::Arguments<'_>) {
| ^^^^ help: if this is intentional, prefix it with an underscore: `_args`
Fix this by adding a no-op assignment using `args` when `CONFIG_PRINTK`
is not set.
Fixes: a66d733da8 ("rust: support running Rust documentation tests as KUnit ones")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Update my email address for KUnit related things in MAINTAINERS (and add
an entry to .mailmap so nothing gets lost).
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If hmm_range_fault() fails a folio_trylock() in do_swap_page,
trying to acquire the lock of a device-private folio for migration,
to ram, the function will spin until it succeeds grabbing the lock.
However, if the process holding the lock is depending on a work
item to be completed, which is scheduled on the same CPU as the
spinning hmm_range_fault(), that work item might be starved and
we end up in a livelock / starvation situation which is never
resolved.
This can happen, for example if the process holding the
device-private folio lock is stuck in
migrate_device_unmap()->lru_add_drain_all()
sinc lru_add_drain_all() requires a short work-item
to be run on all online cpus to complete.
A prerequisite for this to happen is:
a) Both zone device and system memory folios are considered in
migrate_device_unmap(), so that there is a reason to call
lru_add_drain_all() for a system memory folio while a
folio lock is held on a zone device folio.
b) The zone device folio has an initial mapcount > 1 which causes
at least one migration PTE entry insertion to be deferred to
try_to_migrate(), which can happen after the call to
lru_add_drain_all().
c) No or voluntary only preemption.
This all seems pretty unlikely to happen, but indeed is hit by
the "xe_exec_system_allocator" igt test.
Resolve this by waiting for the folio to be unlocked if the
folio_trylock() fails in do_swap_page().
Rename migration_entry_wait_on_locked() to
softleaf_entry_wait_unlock() and update its documentation to
indicate the new use-case.
Future code improvements might consider moving
the lru_add_drain_all() call in migrate_device_unmap() to be
called *after* all pages have migration entries inserted.
That would eliminate also b) above.
v2:
- Instead of a cond_resched() in hmm_range_fault(),
eliminate the problem by waiting for the folio to be unlocked
in do_swap_page() (Alistair Popple, Andrew Morton)
v3:
- Add a stub migration_entry_wait_on_locked() for the
!CONFIG_MIGRATION case. (Kernel Test Robot)
v4:
- Rename migrate_entry_wait_on_locked() to
softleaf_entry_wait_on_locked() and update docs (Alistair Popple)
v5:
- Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION
version of softleaf_entry_wait_on_locked().
- Modify wording around function names in the commit message
(Andrew Morton)
Suggested-by: Alistair Popple <apopple@nvidia.com>
Fixes: 1afaeb8293 ("mm/migrate: Trylock device page in do_swap_page")
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: linux-mm@kvack.org
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: John Hubbard <jhubbard@nvidia.com> #v3
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20260210115653.92413-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit a69d1ab971)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
While nr_hw_update allocates tagset tags it acquires ->pcpu_alloc_mutex
after ->freeze_lock is acquired or queue is frozen. This potentially
creates a circular dependency involving ->fs_reclaim if reclaim is
triggered simultaneously in a code path which first acquires ->pcpu_
alloc_mutex. As the queue is already frozen while nr_hw_queue update
allocates tagsets, the reclaim can't forward progress and thus it could
cause a potential deadlock as reported in lockdep splat[1].
Fix this by pre-allocating tagset tags before we freeze queue during
nr_hw_queue update. Later the allocated tagset tags could be safely
installed and used after queue is frozen.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs8F=OV9s3La2kEQ34YndgfZP-B5PHS4Z8_b9euKG6J4mw@mail.gmail.com/ [1]
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
[axboe: fix brace style issue]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_SEND_VECTORIZED with registered buffers is not implemented but
could be. Don't silently ignore the flag in this case but reject it with
an error. It only affects sendzc as normal sends don't support
registered buffers.
Fixes: 6f02527729 ("io_uring/net: Allow to do vectorized send")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
