Every call to queue init should have a corresponding fini call.
Skipping this would mean skipping removal of the queue from GuC list
(which is part of guc_id allocation). A damaged queue stored in
exec_queue_lookup list would lead to invalid memory reference,
sooner or later.
Call fini to free guc_id. This must be done before any internal
LRCs are freed.
Since the finalization with this extra call became very similar to
__xe_exec_queue_fini(), reuse that. To make this reuse possible,
alter xe_lrc_put() so it can survive NULL parameters, like other
similar functions.
v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs.
Fixes: 3c1fa4aa60 ("drm/xe: Move queue init before LRC creation")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> (v1)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260226212701.2937065-2-tomasz.lis@intel.com
(cherry picked from commit 393e5fea6f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
ctx_restore_mid_bb memory is allocated in wa_bb_store(), but
xe_config_device_release() only frees ctx_restore_post_bb.
Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation
when the configfs device is removed.
Fixes: b30d5de3d4 ("drm/xe/configfs: Add mid context restore bb")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260225013448.3547687-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a235e7d009)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If a batch buffer is complete, it makes little sense to preempt the
fence signaling instructions in the ring, as the largest portion of the
work (the batch buffer) is already done and fence signaling consists of
only a few instructions. If these instructions are preempted, the GuC
would need to perform a context switch just to signal the fence, which
is costly and delays fence signaling. Avoid this scenario by disabling
preemption immediately after the BB start instruction and re-enabling it
after executing the fence signaling instructions.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260115004546.58060-1-matthew.brost@intel.com
(cherry picked from commit 2bcbf2dcde)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Consider the following application:
#include <fcntl.h>
#include <string.h>
#include <drm/drm.h>
#include <sys/ioctl.h>
int main(void) {
int fd = open("/dev/dri/renderD128", O_RDWR);
struct drm_syncobj_create arg1;
ioctl(fd, DRM_IOCTL_SYNCOBJ_CREATE, &arg1);
struct drm_syncobj_handle arg2;
memset(&arg2, 1, sizeof(arg2)); // simulate dirty stack
arg2.handle = arg1.handle;
arg2.flags = 0;
arg2.fd = 0;
arg2.pad = 0;
// arg2.point = 0; // userspace is required to set point to 0
ioctl(fd, DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD, &arg2);
}
The last ioctl returns EINVAL because args->point is not 0. However,
userspace developed against older kernel versions is not aware of the
new point field and might therefore not initialize it.
The correct check would be
if (args->flags & DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_TIMELINE)
return -EINVAL;
However, there might already be userspace that relies on this not
returning an error as long as point == 0. Therefore use the more lenient
check.
Fixes: c2d3a73006 ("drm/syncobj: Extend EXPORT_SYNC_FILE for timeline syncobjs")
Signed-off-by: Julian Orth <ju.orth@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260301-point-v1-1-21fc5fd98614@gmail.com
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time and revert commit 0f6eae86e6 ("dt-bindings: hwmon:
sl28cpld: add sa67mcu compatible").
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20260302122540.1377444-8-mwalle@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The datasheet specifies, that the IRQ_B pin is pulled low when any
unmasked interrupt bit status is changed, and it is released high once
the application processor reads the INT1 register. As it specifies a
level-low behavior, it should not force a falling-edge interrupt.
Remove the IRQF_TRIGGER_FALLING to not force the falling-edge interrupt
and instead rely on the flag from the device tree.
Fixes: 0959b67063 ("regulator: pf9453: add PMIC PF9453 support")
Cc: stable@vger.kernel.org
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Link: https://patch.msgid.link/20260218102518.238943-2-fra.schnyder@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra238 requires different PLLA and PLLA_OUT0 clock rates compared to
other Tegra platforms. Add Tegra238 compatible string to the APE
tegra-audio-graph-card bindings.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260302085323.3139571-2-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected
behavior from the driver - other drivers default to 0 too.
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Link: https://patch.msgid.link/20260221-rsi-config-ret-v1-1-9a8f805e2f31@puri.sm
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before the MIPI DSI clock source can be configured, the target divide
ratio needs to be set.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: 5a4326f2e3 ("clk: renesas: rzg2l: Remove DSI clock rate restrictions")
Link: https://patch.msgid.link/20260227015216.2721504-1-chris.brandt@renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Add a reference to mc-peripheral-props.yaml to allow vendor-specific
properties for memory access timings.
Fix below CHECK_DTBS warings:
arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dtb: can@4,0 (nxp,sja1000): Unevaluated properties are not allowed ('fsl,weim-cs-timing' was unexpected)
from schema $id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212163000.1195586-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
So far the driver populated the struct can_priv::do_set_bittiming() and
struct can_priv::fd::do_set_data_bittiming() callbacks.
Before bringing up the interface, user space has to configure the bitrates.
With these callbacks the configuration is directly forwarded into the CAN
hardware. Then the interface can be brought up.
An ifdown-ifup cycle (without changing the bit rates) doesn't re-configure
the bitrates in the CAN hardware. This leads to a problem with the
CANable-2.5 [1] firmware, which resets the configured bit rates during
ifdown.
To fix the problem remove both bit timing callbacks and always configure
the bitrates in the struct net_device_ops::ndo_open() callback.
[1] https://github.com/Elmue/CANable-2.5-firmware-Slcan-and-Candlelight
Cc: stable@vger.kernel.org
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://patch.msgid.link/20260219-gs_usb-always-configure-bitrates-v2-1-671f8ba5b0a5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The SEV-SNP IBPB-on-Entry feature does not require a guest-side
implementation. It was added in Zen5 h/w, after the first SNP Zen
implementation, and thus was not accounted for when the initial set of SNP
features were added to the kernel.
In its abundant precaution, commit
8c29f01654 ("x86/sev: Add SEV-SNP guest feature negotiation support")
included SEV_STATUS' IBPB-on-Entry bit as a reserved bit, thereby masking
guests from using the feature.
Allow guests to make use of IBPB-on-Entry when supported by the hypervisor, as
the bit is now architecturally defined and safe to expose.
Fixes: 8c29f01654 ("x86/sev: Add SEV-SNP guest feature negotiation support")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@kernel.org
Link: https://patch.msgid.link/20260203222405.4065706-2-kim.phillips@amd.com
As part of the work to remove the dependency on calling into the decompressor
code (startup_64()) for a UEFI boot, a call to rmpadjust() was removed from
sev_enable() in favor of checking the value of the snp_vmpl variable.
When booting through a non-UEFI path and calling startup_64(), the call to
sev_enable() is performed before the BSS section is zeroed. With the removal
of the rmpadjust() call and the corresponding check of the return code, the
snp_vmpl variable is checked.
Since the kernel is running at VMPL0, the snp_vmpl variable will not have been
set and should be the default value of 0. However, since the call occurs
before the BSS is zeroed, the snp_vmpl variable may not actually be zero,
which will cause the guest boot to fail.
Since the decompressor relocates itself, the BSS would need to be cleared both
before and after the relocation, but this would, in effect, cause all of the
changes to BSS variables before relocation to be lost after relocation.
Instead, move the snp_vmpl variable into the .data section so that it is
initialized and the value made safe during relocation. As a pre-caution
against future changes, move other SEV-related decompressor variables into the
.data section, too.
Fixes: 68a501d7fd ("x86/boot: Drop redundant RMPADJUST in SEV SVSM presence check")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Tested-by: Kevin Hui <kevinhui@meta.com>
Tested-by: Changyuan Lyu <changyuanl@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/5648b7de5b0a5d0dfef3785f9582b718678c6448.1770217260.git.thomas.lendacky@amd.com
In this series Greg Kroah-Hartman takes the recent fixes on the gs_usb
driver and applies similar fixes to the f81604 driver.
Link: https://patch.msgid.link/2026022331-opal-evaluator-a928@gregkh
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022334-starlight-scaling-2cea@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If a write urb fails then more needs to be done other than just logging
the message, otherwise the transmission could be stalled. Properly
increment the error counters and wake up the queues so that data will
continue to flow.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022334-slackness-dynamic-9195@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If an interrupt urb is received that is not the correct length, properly
detect it and don't attempt to treat the data as valid.
Cc: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022331-opal-evaluator-a928@gregkh
Fixes: 88da174369 ("can: usb: f81604: add Fintek F81604 support")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When submitting an urb, that is using the anchor pattern, it needs to be
anchored before submitting it otherwise it could be leaked if
usb_kill_anchored_urbs() is called. This logic is correctly done
elsewhere in the driver, except in the read bulk callback so do that
here also.
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Tested-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/2026022320-poser-stiffly-9d84@gregkh
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere.
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022319-huff-absurd-6a18@gregkh
Fixes: 9f2d3eae88 ("can: ucan: add driver for Theobroma Systems UCAN devices")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When looking at the data in a USB urb, the actual_length is the size of
the buffer passed to the driver, not the transfer_buffer_length which is
set by the driver as the max size of the buffer.
When parsing the messages in ems_usb_read_bulk_callback() properly check
the size both at the beginning of parsing the message to make sure it is
big enough for the expected structure, and at the end of the message to
make sure we don't overflow past the end of the buffer for the next
message.
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022316-answering-strainer-a5db@gregkh
Fixes: 702171adee ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
esd_usb_probe() constructs bulk pipes for two endpoints without
verifying their transfer types:
- usb_rcvbulkpipe(dev->udev, 1) for RX (version reply, async RX data)
- usb_sndbulkpipe(dev->udev, 2) for TX (version query, CAN frames)
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes, triggering the WARNING in
usb_submit_urb().
Use usb_find_common_endpoints() to discover and validate the first
bulk IN and bulk OUT endpoints at probe time, before any allocation.
Found pipes are saved to struct esd_usb and code uses them directly
instead of making pipes in place.
Similar to
- commit 136bed0bfd ("can: mcba_usb: properly check endpoint type")
which established the usb_find_common_endpoints() + stored pipes
pattern for CAN USB drivers.
Fixes: 96d8e90382 ("can: Add driver for esd CAN-USB/2 device")
Suggested-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260213203927.599163-1-n7l8m4@u.northwestern.edu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The mcp251x_open() function call free_irq() in its error path with the
mpc_lock mutex held. But if an interrupt already occurred the
interrupt handler will be waiting for the mpc_lock and free_irq() will
deadlock waiting for the handler to finish.
This issue is similar to the one fixed in commit 7dd9c26bd6 ("can:
mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but
for the error path.
To solve this issue move the call to free_irq() after the lock is
released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ
handler will exit right away once it acquired the lock.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260209144706.2261954-1-alban.bedel@lht.dlh.de
Fixes: bf66f3736a ("can: mcp251x: Move to threaded interrupts instead of workqueues.")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The former implementation was only counting the tx_packets value but not
the tx_bytes as the skb was dropped on driver layer.
Enable CAN echo support (IFF_ECHO) in dummy_can_init(), which activates the
code for setting and retrieving the echo SKB and counts the tx_bytes
correctly.
Fixes: 816cf430e8 ("can: add dummy_can driver")
Cc: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260126104540.21024-1-socketcan@hartkopp.net
[mkl: make commit message imperative]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
added a locking for some variables that can be modified at runtime when
updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().
Usually the RX_SETUP only handles and filters incoming traffic with one
exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is
sent when a specific RTR frame is received. Therefore the rx bcm_op uses
bcm_can_tx() which uses the bcm_tx_lock that was only initialized in
bcm_tx_setup(). Add the missing spin_lock_init() when allocating the
bcm_op in bcm_rx_setup() to handle the RTR case properly.
Fixes: c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+5b11eccc403dd1cea9f8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/699466e4.a70a0220.2c38d7.00ff.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260218-bcm_spin_lock_init-v1-1-592634c8a5b5@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
sheaf_flush_main() can be called from __pcs_replace_full_main() where
it's fine if the trylock fails, and pcs_flush_all() where it's not
expected to and for some flush callers (when destroying the cache or
memory hotremove) it would be actually a problem if it failed and left
the main sheaf not flushed. The flush callers can however safely use
local_lock() instead of trylock.
The trylock failure should not happen in practice on !PREEMPT_RT, but
can happen on PREEMPT_RT. The impact is limited in practice because when
a trylock fails in the kmem_cache_destroy() path, it means someone is
using the cache while destroying it, which is a bug on its own. The memory
hotremove path is unlikely to be employed in a production RT config, but
it's possible.
To fix this, split the function into sheaf_flush_main() (using
local_lock()) and sheaf_try_flush_main() (using local_trylock()) where
both call __sheaf_flush_main_batch() to flush a single batch of objects.
This will also allow lockdep to verify our context assumptions.
The problem was raised in an off-list question by Marcelo.
Fixes: 2d517aa09b ("slab: add opt-in caching layer of percpu sheaves")
Cc: stable@vger.kernel.org
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Hao Li <hao.li@linux.dev>
Link: https://patch.msgid.link/20260211-b4-sheaf-flush-v1-1-4e7f492f0055@suse.cz
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Add validation of the inner IPv4 packet tot_len and ihl fields parsed
from decrypted IPTFS payloads in __input_process_payload(). A crafted
ESP packet containing an inner IPv4 header with tot_len=0 causes an
infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the
data offset never advances and the while(data < tail) loop never
terminates, spinning forever in softirq context.
Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct
iphdr), which catches both the tot_len=0 case and malformed ihl values.
The normal IP stack performs this validation in ip_rcv_core(), but IPTFS
extracts and processes inner packets before they reach that layer.
Reported-by: Roshan Kumar <roshaen09@gmail.com>
Fixes: 6c82d24336 ("xfrm: iptfs: add basic receive packet (tunnel egress) handling")
Cc: stable@vger.kernel.org
Signed-off-by: Roshan Kumar <roshaen09@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
To make it easier to locate the documentation during development.
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
In mt6363_regulator_probe(), devm_add_action_or_reset() is used to
automatically dispose of the IRQ mapping if the probe fails or the
device is removed.
The manual call to irq_dispose_mapping() in the error path was redundant
as the reset action already triggers mt6363_irq_remove(). Furthermore,
the manual call incorrectly passed the hardware IRQ number (info->hwirq)
instead of the virtual IRQ mapping (info->virq).
Remove the redundant and incorrect manual disposal.
Fixes: 3c36965df8 ("regulator: Add support for MediaTek MT6363 SPMI PMIC Regulators")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260223-mt6363-v1-1-c99a2e8ac621@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In cs35l56_process_xu_onchip_speaker_id() the warning that the number
of pulls != number of GPIOs should only be printed if pulls are defined.
Pull settings are optional because there would normally be an external
resistor providing the pull. The warning would still be true if pulls
are not defined, but in that case is just log noise.
While we're changing that block of code, also fix the indenting of the
arguments to the dev_warn().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260226113511.1768838-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds some match entries for a few system configurations:
cs42l43 link 0 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs42l45 link 1 UID 0
cs35l63 link 0 UID 0
cs35l63 link 0 UID 2
cs35l63 link 0 UID 4
cs35l63 link 0 UID 6
cs42l45 link 0 UID 0
cs35l63 link 1 UID 0
cs35l63 link 1 UID 1
cs42l45 link 0 UID 0
cs35l63 link 1 UID 1
cs35l63 link 1 UID 3
cs42l45 link 1 UID 0
cs35l63 link 0 UID 0
cs35l63 link 0 UID 1
cs42l43 link 1 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs35l63 link 0 UID 0
cs35l63 link 0 UID 2
cs35l63 link 0 UID 4
cs35l63 link 0 UID 6
cs42l43 link 0 UID 1
cs42l43b link 0 UID 1
cs42l45 link 0 UID 0
cs42l45 link 1 UID 0
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20260224130307.526626-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the necessary quirk for the Alienware 18 Area 51 (2025).
Complements commit 1b03391d07 ("ASoC: Intel: sof_sdw: Add quirk
for Alienware Area 51 (2025) 0CCC SKU").
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Link: https://patch.msgid.link/20260224190224.30630-1-o.freyermuth@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the ASP register patches to a separate struct and apply this from the
ASP DAI probe() function so that the registers are only patched if the DAI
is part of a DAI link.
Some systems use the ASP as a special-purpose interconnect and on these
systems the ASP registers are configured by a third party (the firmware,
the BIOS, or another device using the amp's secondary host control
interface).
If the machine driver does not hook up the ASP DAI then the ASP registers
must be omitted from the patch to prevent overwriting the third party
configuration.
If the machine driver includes the ASP DAI in a DAI link, this implies that
the machine driver and higher components (such as alsa-ucm) are taking
ownership of the ASP. In this case the ASP registers are patched to known
defaults and the machine driver should configure the ASP.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260226110137.1664562-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA controls should return 1 if the value in the control changed but the
control put operation fsl_easrc_set_reg() only returns 0 or a negative
error code, causing ALSA to not generate any change events. Add a suitable
check by using regmap_update_bits_check() with the underlying regmap, this
is more clearly and simply correct than trying to verify that one of the
generic ops is exactly equivalent to this one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260205-asoc-fsl-easrc-fix-events-v1-2-39d4c766918b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA controls should return 1 if the value in the control changed but the
control put operation fsl_easrc_iec958_put_bits() unconditionally returns
0, causing ALSA to not generate any change events. This is detected by
mixer-test with large numbers of messages in the form:
No event generated for Context 3 IEC958 CS5
Context 3 IEC958 CS5.0 orig 5224 read 5225, is_volatile 0
Add a suitable check.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260205-asoc-fsl-easrc-fix-events-v1-1-39d4c766918b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
* Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
* Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature set
* Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
* Don't leak stage-2 mappings in protected mode
* Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
* Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
* Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
* Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
* Remove internal Kconfigs that are now set on all architectures.
* Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmkSMUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO2tggAgOHvH9lwgHxFADAOKXPEsv+Tw6cB
zuUBPo6e5XQQx6BJQVo8ctveCBbA0ybRJXbju6lgS/Bg9qQYKjZbNrYdKwBwhw3b
JBUFTIJgl7lLU5gEANNtvgiiNUc2z1GfG8NQ5ovMJ0/MDEEI0YZjkGoe8ZyJ54vg
qrNHBROKvt54wVHXFGhZ1z8u4RqJ/WCmy21wYbwiMgQGXq9ugRRfhnu3iGNO8BcK
bSSh4cP7qusO5Nj0m/XYD/68VwvyogaEkh4sNS1VH0FOoONRWs80Q6iT2HjCGgv6
mAzCx/yB9ziSQRis3oYYEBH23HZxRVDVBeSBlPcbxE3VM7SGzp7O8L692g==
=+mC+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
The deferred page initialization prevents debug objects from allocating
slab pages until the initialization is complete. That causes depletion of
the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it might
be invoked from arbitrary contexts. When PREEMPT_COUNT is disabled there is
no way to know whether the context is safe to set __GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag cause
new_slab() to end up in alloc_frozen_pages_nolock_noprof(), which returns
early when deferred page initialization has not yet completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when the
context is preemtible. When PREEMPT_COUNT is disabled the context is
unknown and the reclaim bit can't be set because the caller might hold
locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT || !DEFERRED_STRUCT_PAGE_INIT,
which limits the coverage slightly, but keeps it functional for most cases.
-----BEGIN PGP SIGNATURE-----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=kvxN
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fix from Thomas Gleixner:
"A single fix for debugobjects.
The deferred page initialization prevents debug objects from
allocating slab pages until the initialization is complete. That
causes depletion of the pool and disabling of debugobjects.
The reason is that debugobjects uses __GFP_HIGH for allocations as it
might be invoked from arbitrary contexts. When PREEMPT_COUNT is
disabled there is no way to know whether the context is safe to set
__GFP_KSWAPD_RECLAIM.
This worked until v6.18. Since then allocations w/o a reclaim flag
cause new_slab() to end up in alloc_frozen_pages_nolock_noprof(),
which returns early when deferred page initialization has not yet
completed.
Work around that when PREEMPT_COUNT is enabled as the preempt counter
allows debugobjects to add __GFP_KSWAPD_RECLAIM to the GFP flags when
the context is preemtible. When PREEMPT_COUNT is disabled the context
is unknown and the reclaim bit can't be set because the caller might
hold locks which might deadlock in the allocator.
That makes debugobjects depend on PREEMPT_COUNT ||
!DEFERRED_STRUCT_PAGE_INIT, which limits the coverage slightly, but
keeps it functional for most cases"
* tag 'core-debugobjects-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobject: Make it work with deferred page initialization - again
- Fix speculative safety in fred_extint()
- Fix __WARN_printf() trap in early_fixup_exception()
- Fix clang-build boot bug for unusual alignments,
triggered by CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
- Replace the final few __ASSEMBLY__ stragglers that snuck
in lately into non-UAPI x86 headers and use __ASSEMBLER__
consistently (again).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=A61U
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix speculative safety in fred_extint()
- Fix __WARN_printf() trap in early_fixup_exception()
- Fix clang-build boot bug for unusual alignments, triggered by
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y
- Replace the final few __ASSEMBLY__ stragglers that snuck in lately
into non-UAPI x86 headers and use __ASSEMBLER__ consistently (again)
* tag 'x86-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/headers: Replace __ASSEMBLY__ stragglers with __ASSEMBLER__
x86/cfi: Fix CFI rewrite for odd alignments
x86/bug: Handle __WARN_printf() trap in early_fixup_exception()
x86/fred: Correct speculative safety in fred_extint()
for the common HZ=100, 250 or 1000 cases, only inlining them
for odd HZ values like HZ=300.
The inlining overhead showed up in performance tests of the TCP code.
(Marked as an RFC pull request, as it's not a regression.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=duTI
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Improve the inlining of jiffies_to_msecs() and jiffies_to_usecs(), for
the common HZ=100, 250 or 1000 cases. Only use a function call for odd
HZ values like HZ=300 that generate more code.
The function call overhead showed up in performance tests of the TCP
code"
* tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected
un-inlining, which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and
want to avoid. The visible ugliness of the new reserved field
will be avoided the next time the RSEQ area is extended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Nxqx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.
* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs. perf_remove_from_context() race
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0JyK
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs perf_remove_from_context() race
* tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
perf/core: Fix refcount bug and potential UAF in perf_mmap
perf/x86/intel/uncore: Add per-scheduler IMC CAS count events
perf/core: Fix invalid wait context in ctx_sched_in()
version to use the new CONFIG_WARN_CONTEXT_ANALYSIS feature.
In particular this avoids the widely used Android clang 22.0.1
pre-release build which is known to be broken for this usecase.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KdpZ
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Now that LLVM 22 has been released officially, require a release
version to use the new CONFIG_WARN_CONTEXT_ANALYSIS feature.
In particular this avoids the widely used Android clang 22.0.1
pre-release build which is known to be broken for this usecase"
* tag 'locking-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lib/Kconfig.debug: Require a release version of LLVM 22 for context analysis
- Fix frozen interrupt bug in the sifive-plic driver
- Limit per-device MSI interrupts on uncommon gic-v3-its
hardware variants
- Address Sparse warning by constifying a variable in
the MMP driver
- Revert broken commit and also fix an error check
in the ls-extirq driver
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=hIKS
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irqchip driver fixes from Ingo Molnar:
- Fix frozen interrupt bug in the sifive-plic driver
- Limit per-device MSI interrupts on uncommon gic-v3-its hardware
variants
- Address Sparse warning by constifying a variable in the MMP driver
- Revert broken commit and also fix an error check in the ls-extirq
driver
* tag 'irq-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ls-extirq: Fix devm_of_iomap() error check
Revert "irqchip/ls-extirq: Use for_each_of_imap_item iterator"
irqchip/mmp: Make icu_irq_chip variable static const
irqchip/gic-v3-its: Limit number of per-device MSIs to the range the ITS supports
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
All changes in drivers (well technically ses is enclosure services,
but its change is minor). The biggest is the write combining change
in lpfc followed by the additional NULL checks in mpi3mr.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaaO9chsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIU8tQEAiyqxkTmD84X/4hL8+x+lxAI+lYmsGRfZ
4A4Xtx+B5vgBAK5mT+TEGBNVoGgpsWoDEa3xj6edz1jQMTiwnzhpnwql
=FqRP
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All changes in drivers (well technically SES is enclosure services,
but its change is minor). The biggest is the write combining change in
lpfc followed by the additional NULL checks in mpi3mr"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix shift out of bounds when MAXQ=32
scsi: ufs: core: Move link recovery for hibern8 exit failure to wl_resume
scsi: ufs: core: Fix possible NULL pointer dereference in ufshcd_add_command_trace()
scsi: snic: MAINTAINERS: Update snic maintainers
scsi: snic: Remove unused linkstatus
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
scsi: mpi3mr: Add NULL checks when resetting request and reply queues
scsi: ufs: core: Reset urgent_bkops_lvl to allow runtime PM power mode
scsi: ses: Fix devices attaching to different hosts
scsi: ufs: core: Fix RPMB region size detection for UFS 2.2
scsi: storvsc: Fix scheduling while atomic on PREEMPT_RT
scsi: lpfc: Properly set WC for DPP mapping
-----BEGIN PGP SIGNATURE-----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=fj3P
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix alignment of arm64 JIT buffer to prevent atomic tearing (Fuad
Tabba)
- Fix invariant violation for single value tnums in the verifier
(Harishankar Vishwanathan, Paul Chaignon)
- Fix a bunch of issues found by ASAN in selftests/bpf (Ihor Solodrai)
- Fix race in devmpa and cpumap on PREEMPT_RT (Jiayuan Chen)
- Fix show_fdinfo of kprobe_multi when cookies are not present (Jiri
Olsa)
- Fix race in freeing special fields in BPF maps to prevent memory
leaks (Kumar Kartikeya Dwivedi)
- Fix OOB read in dmabuf_collector (T.J. Mercier)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (36 commits)
selftests/bpf: Avoid simplification of crafted bounds test
selftests/bpf: Test refinement of single-value tnum
bpf: Improve bounds when tnum has a single possible value
bpf: Introduce tnum_step to step through tnum's members
bpf: Fix race in devmap on PREEMPT_RT
bpf: Fix race in cpumap on PREEMPT_RT
selftests/bpf: Add tests for special fields races
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
bpf: Delay freeing fields in local storage
bpf: Lose const-ness of map in map_check_btf()
bpf: Register dtor for freeing special fields
selftests/bpf: Fix OOB read in dmabuf_collector
selftests/bpf: Fix a memory leak in xdp_flowtable test
bpf: Fix stack-out-of-bounds write in devmap
bpf: Fix kprobe_multi cookies access in show_fdinfo callback
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
selftests/bpf: Don't override SIGSEGV handler with ASAN
selftests/bpf: Check BPFTOOL env var in detect_bpftool_path()
selftests/bpf: Fix out-of-bounds array access bugs reported by ASAN
selftests/bpf: Fix array bounds warning in jit_disasm_helpers
...
- Do not register imx_clk_scu_driver in imx8qxp_clk_probe(); besides
fixing two other issues, this avoids a deadlock in combination with
commit dc23806a7c ("driver core: enforce device_lock for
driver_match_device()").
- Move secondary node lookup from device_get_next_child_node() to
fwnode_get_next_child_node(); this avoids issues when users switch
from the device API to the fwnode API.
- Export io_define_{read,write}!() to avoid unused import warnings when
CONFIG_PCI=n.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaaNQggAKCRBFlHeO1qrK
Lo3AAP91+UfLXYTXh2qhAndszSSJi1Xjq2Ik4cIf4UT3Ed2FrQD/QQuppy8k6zFx
tCZGWbmolra9Vnf/oz1OpCaU87JF/Qc=
=ct45
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Do not register imx_clk_scu_driver in imx8qxp_clk_probe(); besides
fixing two other issues, this avoids a deadlock in combination with
commit dc23806a7c ("driver core: enforce device_lock for
driver_match_device()")
- Move secondary node lookup from device_get_next_child_node() to
fwnode_get_next_child_node(); this avoids issues when users switch
from the device API to the fwnode API
- Export io_define_{read,write}!() to avoid unused import warnings when
CONFIG_PCI=n
* tag 'driver-core-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
clk: scu/imx8qxp: do not register driver in probe()
rust: io: macro_export io_define_read!() and io_define_write!()
device property: Allow secondary lookup in fwnode_get_next_child_node()
The convention for KUnit tests is to have the test kconfig options
visible only when the code they depend on is already enabled. This way
only the tests that are relevant to the particular kernel build can be
enabled, either manually or via KUNIT_ALL_TESTS.
Update lib/crypto/tests/Kconfig to follow that convention, i.e. depend
on the corresponding library options rather than selecting them. This
fixes an issue where enabling KUNIT_ALL_TESTS enabled non-test code.
This does mean that it becomes a bit more difficult to enable *all* the
crypto library tests (which is what I do as a maintainer of the code),
since doing so will now require enabling other options that select the
libraries. Regardless, we should follow the standard KUnit convention.
I'll also add a .kunitconfig file that does enable all these options.
Note: currently most of the crypto library options are selected by
visible options in crypto/Kconfig, which can be used to enable them
without too much trouble. If in the future we end up with more cases
like CRYPTO_LIB_CURVE25519 which is selected only by WIREGUARD (thus
making CRYPTO_LIB_CURVE25519_KUNIT_TEST effectively depend on WIREGUARD
after this commit), we could consider adding a new kconfig option that
enables all the library code specifically for testing.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdULzMdxuTVfg8_4jdgzbzjfx-PHkcgbGSthcUx_sHRNMg@mail.gmail.com
Fixes: 4dcf6cadda ("lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256")
Fixes: 571eaeddb6 ("lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512")
Fixes: 6dd4d9f791 ("lib/crypto: tests: Add KUnit tests for Poly1305")
Fixes: 66b1306079 ("lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1")
Fixes: d6b6aac0cd ("lib/crypto: tests: Add KUnit tests for MD5 and HMAC-MD5")
Fixes: afc4e4a5f1 ("lib/crypto: tests: Migrate Curve25519 self-test to KUnit")
Fixes: 6401fd334d ("lib/crypto: tests: Add KUnit tests for BLAKE2b")
Fixes: 15c64c47e4 ("lib/crypto: tests: Add SHA3 kunit tests")
Fixes: b3aed551b3 ("lib/crypto: tests: Add KUnit tests for POLYVAL")
Fixes: ed894faccb ("lib/crypto: tests: Add KUnit tests for ML-DSA verification")
Fixes: 7246fe6cd6 ("lib/crypto: tests: Add KUnit tests for NH")
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260226191749.39397-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
