udp_flow_src_port() is indirectly using sk->sk_txhash as a base,
because __tcp_transmit_skb() uses skb_set_hash_from_sk().
This is problematic because this field can change over the
lifetime of a TCP flow, thanks to calls to sk_rethink_txhash().
Problem is that some NIC might (ab)use the PSP UDP source port in their
RSS computation, and PSP packets for a given flow could jump
from one queue to another.
In order to avoid surprises, it is safer to let Protective Load
Balancing (PLB) get its entropy from the IPv6 flowlabel,
and change psp_write_headers() to use sk->sk_hash which
does not change for the duration of the flow.
We might add a sysctl to select the behavior, if there
is a need for it.
Fixes: fc72451574 ("psp: provide encapsulation helper for drivers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-By: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260218141337.999945-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+937b5bbb6a815b3e5d0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69949275.050a0220.2eeac1.0145.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260217161205.2079883-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dw_pcie_ep_set_bar() currently tears down existing inbound mappings only
when either the previous or the new struct pci_epf_bar uses submaps
(num_submap != 0). If both the old and new mappings are BAR Match Mode,
reprogramming the same ATU index is sufficient, so no explicit teardown
was needed.
However, some callers may reuse the same struct pci_epf_bar instance and
update it in place before calling set_bar() again. In that case
ep_func->epf_bar[bar] and the passed-in epf_bar can point to the same
object, so we cannot reliably distinguish BAR Match Mode -> BAR Match Mode
from Address Match Mode -> BAR Match Mode. As a result, the conditional
teardown based on num_submap becomes unreliable and existing inbound maps
may be left active.
Call dw_pcie_ep_clear_ib_maps() unconditionally before reprogramming the
BAR so that in-place updates are handled correctly.
This introduces a behavioral change in a corner case: if a BAR
reprogramming attempt fails (especially for the long-standing BAR Match
Mode -> BAR Match Mode update case), the previously programmed inbound
mapping will already have been torn down. This should be acceptable, since
the caller observes the error and should not use the BAR for any real
transactions in that case.
While at it, document that the existing update parameter check is
best-effort for in-place updates.
Fixes: cc839bef77 ("PCI: dwc: ep: Support BAR subrange inbound mapping via Address Match Mode iATU")
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260202145407.503348-3-den@valinux.co.jp
dw_pcie_ep_clear_ib_maps() first checks whether the inbound mapping for a
BAR is in BAR Match Mode (tracked via ep_func->bar_to_atu[bar]). Once
found, the iATU region is disabled and the bookkeeping is cleared.
BAR Match Mode and Address Match Mode mappings are mutually exclusive for a
given BAR, so there is nothing left for the Address Match Mode teardown
path to do after the BAR Match Mode mapping has been removed.
Return early after clearing the BAR Match Mode mapping to avoid running the
Address Match Mode teardown path. This makes the helper's intention
explicit and helps detect incorrect use of pci_epc_set_bar().
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20260202145407.503348-2-den@valinux.co.jp
Like some of the other endpoint modules, pci-epf-test now also uses
configfs, but is missing an indication in Kconfig:
arm-linux-gnueabi-ld: drivers/pci/endpoint/functions/pci-epf-test.o: in function `pci_epf_test_add_cfs':
pci-epf-test.c:(.text.pci_epf_test_add_cfs+0x2c): undefined reference to `config_group_init_type_name'
Select the symbol as needed.
Fixes: ffcc4850a1 ("PCI: endpoint: pci-epf-test: Allow overriding default BAR sizes")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602180706.VtXkmtqL-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260211070812.4087119-1-arnd@kernel.org
pbus_size_mem_optional() adds dev_res->add_size of a bridge window into
children_add_size when the window has a non-optional part. However, if the
bridge window is fully optional, only r_size is added (which is zero for
such a window).
Also, a second dev_res entry will be added by pci_dev_res_add_to_list()
into realloc_head for the bridge window (resulting in triggering the
realloc_head-must-be-fully-consumed sanity check after a single pass of the
resource assignment algorithm):
WARNING: drivers/pci/setup-bus.c:2153 at pci_assign_unassigned_root_bus_resources+0xa5/0x260
Correct these problems by always adding dev_res->add_size for bridge
windows and not calling pci_dev_res_add_to_list() if the dev_res entry
exists.
Fixes: 6a5e64c75e ("PCI: Add pbus_mem_size_optional() to handle optional sizes")
Reported-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: RavitejaX Veesam <ravitejax.veesam@intel.com>
Link: https://patch.msgid.link/20260218223419.22366-1-ilpo.jarvinen@linux.intel.com
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The event_hist_open() and event_hist_poll() functions currently retrieve
a trace_event_file pointer from a file struct by invoking
event_file_data(), which simply returns file->f_inode->i_private. The
functions then check if the pointer is NULL to determine whether the event
is still valid. This approach is flawed because i_private is assigned when
an eventfs inode is allocated and remains set throughout its lifetime.
Instead, the code should call event_file_file(), which checks for
EVENT_FILE_FL_FREED. Using the incorrect access function may result in the
code potentially opening a hist file for an event that is being removed or
becoming stuck while polling on this file.
Correct the access method to event_file_file() in both functions.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-2-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177123421541.142205.9414352170164678966.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260213100130.2013839-1-d.dulov@aladdin.ru
Closes: https://lore.kernel.org/r/202406130130.JtTGRf7W-lkp@intel.com/
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qSCj
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
-----BEGIN PGP SIGNATURE-----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=mb+y
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix invalid write loop logic in libbpf's bpf_linker__add_buf() (Amery
Hung)
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct gic_kvm_info", but the returned type,
while matching, is const qualified. To get them exactly matching, just
use the dereferenced pointer for the sizeof().
Link: https://patch.msgid.link/20260206223022.it.052-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "void **" but the returned type will be "void ***".
These are the same allocation size (pointer size), but the types do not
match. Adjust the allocation type to match the assignment.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260206222151.work.016-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct dmz_mblock **" but the returned type will
be "struct dmz_mblk **". These are the same allocation size (pointer
size), but the types do not match. Adjust the allocation type to match
the assignment.
Link: https://patch.msgid.link/20250426061707.work.587-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct crypto_skcipher **" but the returned type
will be "struct crypto_aead **". These are the same allocation size
(pointer size), but the types don't match. Adjust the allocation type
to match the assignment.
Link: https://patch.msgid.link/20250426061629.work.266-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In commit 2ff5baa9b5 ("HID: appleir: Fix potential NULL dereference at
raw event handle"), we handle the fact that raw event callbacks
can happen even for a HID device that has not been "claimed" causing a
crash if a broken device were attempted to be connected to the system.
Fix up the remaining in-tree HID drivers that forgot to add this same
check to resolve the same issue.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Bastien Nocera <hadess@hadess.net>
Cc: linux-input@vger.kernel.org
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The memory pointer returned by the report_fixup() hook does not get
freed by the caller. Instead, report_fixup() must return (in return
value and *rsize) a memory buffer with at least the same lifetime as
the input buffer (defined by rdesc and original *rsize).
This is usually achieved using one of the following techniques:
* Returning a pointer and size to a sub-portion of the input buffer
* Returning a pointer to a static buffer
* Allocating a buffer with a devm_*() function,
which will automatically get freed when the device is removed.
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Since commit 9c328f5474 ("net: nfc: nci: Add parameter validation for
packet data") communication with nci nfc chips is not working any more.
The mentioned commit tries to fix access of uninitialized data, but
failed to understand that in some cases the data packet is of variable
length and can therefore not be compared to the maximum packet length
given by the sizeof(struct).
Fixes: 9c328f5474 ("net: nfc: nci: Add parameter validation for packet data")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260218083000.301354-1-michael.thalmeier@hale.at
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 misc fixes 2026-02-18
This patchset provides misc bug fixes from the team to the mlx5
core and Eth drivers.
====================
Link: https://patch.msgid.link/20260218072904.1764634-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The max number of channels is always an unsigned int, use the correct
type to fix compilation errors done with strict type checking, e.g.:
error: call to ‘__compiletime_assert_1110’ declared with attribute
error: min(mlx5e_get_devlink_param_num_doorbells(mdev),
mlx5e_get_max_num_channels(mdev)) signedness error
Fixes: 74a8dadac1 ("net/mlx5e: Preparations for supporting larger number of channels")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the mentioned "Fixes" commit, various work tasks triggering devlink
health reporter recovery were switched to use netdev_trylock to protect
against concurrent tear down of the channels being recovered. But this
had the side effect of introducing potential deadlocks because of
incorrect lock ordering.
The correct lock order is described by the init flow:
probe_one -> mlx5_init_one (acquires devlink lock)
-> mlx5_init_one_devl_locked -> mlx5_register_device
-> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe
-> register_netdev (acquires rtnl lock)
-> register_netdevice (acquires netdev lock)
=> devlink lock -> rtnl lock -> netdev lock.
But in the current recovery flow, the order is wrong:
mlx5e_tx_err_cqe_work (acquires netdev lock)
-> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report
-> devlink_health_report (acquires devlink lock => boom!)
-> devlink_health_reporter_recover
-> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx
-> mlx5e_tx_reporter_err_cqe_recover
The same pattern exists in:
mlx5e_reporter_rx_timeout
mlx5e_reporter_tx_ptpsq_unhealthy
mlx5e_reporter_tx_timeout
Fix these by moving the netdev_trylock calls from the work handlers
lower in the call stack, in the respective recovery functions, where
they are actually necessary.
Fixes: 8f7b00307b ("net/mlx5e: Convert mlx5 netdevs to instance locking")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The macsec_aso_set_arm_event function calls mlx5_aso_poll_cq once
without a retry loop. If the CQE is not immediately available after
posting the WQE, the function fails unnecessarily.
Use read_poll_timeout() to poll 3-10 usecs for CQE, consistent with
other ASO polling code paths in the driver.
Fixes: 739cfa3451 ("net/mlx5: Make ASO poll CQ usable in atomic context")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The write combining completion poll loop uses usleep_range() which can
sleep much longer than requested due to scheduler latency. Under load,
we witnessed a 20ms+ delay until the process was rescheduled, causing
the jiffies based timeout to expire while the thread is sleeping.
The original do-while loop structure (poll, sleep, check timeout) would
exit without a final poll when waking after timeout, missing a CQE that
arrived during sleep.
Instead of the open-coded while loop, use the kernel's poll_timeout_us()
which always performs an additional check after the sleep expiration,
and is less error-prone.
Note: poll_timeout_us() doesn't accept a sleep range, by passing 10
sleep_us the sleep range effectively changes from 2-10 to 3-10 usecs.
Fixes: d98995b4bf ("net/mlx5: Reimplement write combining test")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ASO completion poll loop uses usleep_range() which can sleep much
longer than requested due to scheduler latency. Under load, we witnessed
a 20ms+ delay until the process was rescheduled, causing the jiffies
based timeout to expire while the thread is sleeping.
The original do-while loop structure (poll, sleep, check timeout) would
exit without a final poll when waking after timeout, missing a CQE that
arrived during sleep.
Instead of the open-coded while loop, use the kernel's
read_poll_timeout() which always performs an additional check after the
sleep expiration, and is less error-prone.
Note: read_poll_timeout() doesn't accept a sleep range, by passing 10
sleep_us the sleep range effectively changes from 2-10 to 3-10 usecs.
Fixes: 739cfa3451 ("net/mlx5: Make ASO poll CQ usable in atomic context")
Fixes: 7e3fce82d9 ("net/mlx5e: Overcome slow response for first macsec ASO WQE")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes: e71383fb9c ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HWRM_FUNC_CFG is used to reserve resources, whereas HWRM_FUNC_QCFG is
intended for querying resource information from the firmware.
Since __bnge_hwrm_reserve_pf_rings() reserves resources for a specific
PF, the command type should be HWRM_FUNC_CFG.
Fixes: 627c67f038 ("bng_en: Add resource management support")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260218052755.4097468-1-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Not needed anymore since we use the VBIOS function.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure that the DAC output is enabled at the correct time by
moving it to the DCE link encoder similarly to how digital
outputs are enabled.
This also removes the call to DAC1EncoderControl from the DCE
HWSS, which always felt like it was a hacky solution.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently the VBIOS SelectCRTC_Source function overwrites
a few registers (such as FMT_*) which DC writes in a different
place, which can cause problems.
Instead of using the SelectCRTC_Source function from the
VBIOS, use the DAC_SOURCE_SELECT register directly, similarly
to how it is done for digital link encoders.
Fixes: 3be26d81b1 ("drm/amd/display: Support DAC in dce110_hwseq")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VBIOS DAC1EncoderControl() function can initialize the DAC,
by writing board-specific values to certain registers.
Call this at link encoder hardware initialization time similarly
to how the equivalent UNIPHYTransmitterControl initialization
is done.
This fixes DAC output on the Radeon HD 7790.
Also remove the ENCODER_CONTROL_SETUP enum from the
dac_encoder_control_prepare_params function which is actually
not a supported operation for DAC encoders.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apparently, the VBIOS DAC1EncoderControl function is much more
graceful about turning off the DAC. It writes various DAC
registers in a specific sequence. Use that instead of just
clearing the DAC_ENABLE register.
Do this in just the dce110_link_encoder_disable_output
function and remove it from the HWSS.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The analog engine is already there in the link_analog_engine
variable and assigned to enc_init_data.analog_engine already.
I suspect this was a rebase mistake.
Fixes: 436d0d22aa ("drm/amd/display: Pass proper DAC encoder ID to VBIOS")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turned that using 4 level page tables on GMC generations which support
57bit VAs actually doesn't work at all.
Background is that the GMC actually can't switch between 4 and 5 levels,
but rather just uses a subset of address space when less than 5 levels are
selected.
Philip already removed the automatically switch to 4levels, now fix it as
well should it be enabled by module parameters.
v2: fix AMDGPU_GMC_HOLE_MASK as well, fix off by one issue pointed out
by Philip
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On Intel MacBookPros with switchable graphics, when the iGPU
is enabled, the address of VRAM gets put at 0 in the dGPU's
virtual address space. This is non-standard and seems to cause
issues with the cursor if it ends up at 0. We have the framework
to reserve memory at 0 in the address space, so enable it here if
the vram start address is 0.
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4302
Cc: stable@vger.kernel.org
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi support atomics between links. Set them to true. This only set for
GFX12 onwards to avoid regression on older generations
v2: Use correct xgmi flag that indicates CPU connection
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes issues when the code moves forward with a potential
NULL pointer, without checking.
Removed one redundant NULL check for a function parameter. This check
is already done in the only caller.
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The plane scaling hw seems to have the same min/max plane scaling limits
for all 16 bpc / 64 bpp interleaved pixel color formats.
Therefore add cases to amdgpu_dm_plane_get_min_max_dc_plane_scaling() for
all the 16 bpc fixed-point / unorm formats to use the same .fp16
up/downscaling factor limits as used by the fp16 floating point formats.
So far, 16 bpc unorm formats were not handled, and the default: path
returned max/min factors for 32 bpp argb8888 formats, which were wrong
and bigger than what many DCE / DCN hw generations could handle.
The result sometimes was misscaling of framebuffers with
DRM_FORMAT_XRGB16161616, DRM_FORMAT_ARGB16161616, DRM_FORMAT_XBGR16161616,
DRM_FORMAT_ABGR16161616, leading to very wrong looking display, as tested
on Polaris11 / DCE-11.2.
So far this went unnoticed, because only few userspace clients used such
16 bpc unorm framebuffers, and those didn't use hw plane scaling, so they
did not experience this issue.
With upcoming Mesa 26 exposing 16 bpc unorm formats under both OpenGL
and Vulkan under Wayland, and the upcoming GNOME 50 Mutter Wayland
compositor allowing for direct scanout of these formats, the scaling
hw will be used on these formats if possible for HiDPI display scaling,
so it is important to use the correct hw scaling limits to avoid wrong
display.
Tested on AMD Polaris 11 / DCE 11.2 with upcoming Mesa 26 and GNOME 50
on HiDPI displays with scaling enabled. The mutter Wayland compositor now
correctly falls back to scaling via desktop compositing instead of direct
scanout, thereby avoiding wrong image display. For unscaled mode, it
correctly uses direct scanout.
Fixes: 580204038f ("drm/amd/display: Enable support for 16 bpc fixed-point framebuffers.")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This solves a priority inversion issue, caused by the language
runtime making high-priority queues wait for activity on
lower-priority queues.
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Shaper programming has high chance to fail on first time after
power-on or reboot. This can be verified by running IGT's kms_colorop.
[How]
Always power on the shaper and 3DLUT before programming by
removing the debug flag of low power mode.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Check return of cm3_helper_translate_curve_to_hw_format.
This is reported as a CHECKED_RETURN error by Coverity.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Fix fastboot broken in driver.
This is caused by an open source backport change 7495962c.
from the comment, the intended check is to disable fastboot
for pre-DCN10. but the logic check is reversed, and causes
fastboot to be disabled on all DCN10 and after.
fastboot is for driver trying to pick up bios used hw setting
and bypass reprogramming the hw if dc_validate_boot_timing()
condition meets.
Fixes: 7495962cbc ("drm/amd/display: Disable fastboot on DCE 6 too")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <Mario.Limonciello@amd.com>
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When there is no eDP panel connected and during
s0ix resume, unnecessary eDP power sequence and
HPD happening, resulting in ~2 seconds delay.
Fixed the issue by avoiding link detect for eDP
connection with no sink in dm_resume.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Saidireddy Yenugu <Saidireddy.Yenugu@amd.com>
Co-developed-by: ThummarDip Kishorbhai <ThummarDip.Kishorbhai@amd.com>
Signed-off-by: ThummarDip Kishorbhai <ThummarDip.Kishorbhai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 08a01ec306 ("drm/amd/display: Add Gfx Base Case For Linear Tiling Handling")
Reason for revert: Got blank screen issues while doing PNP
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Nicholas Carbones <Nicholas.Carbones@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
