Disable support for odd panning and size in y direction when running on
display version 35 and using semiplanar formats.
Bspec: 68903
Signed-off-by: Juha-pekka Heikkila <juha-pekka.heikkila@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-12-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Interlace mode is officially removed from HW from Xe3p_LPD. The
register TRANS_VSYNCSHIFT and the bits in TRANS_CONF are now removed, so
make sure we do not set/get these anymore.
Bspec: 69961, 70000
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-10-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Add CDCLK table for Xe3p_LPD.
Just as with Xe3_LPD, we don't need to send voltage index info in the
PMDemand message, so we are able to re-use xe3lpd_cdclk_funcs.
With the new CDCLK table, we also need to update the maximum CDCLK value
returned by intel_update_max_cdclk().
Bspec: 68861, 68863
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-8-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
With Xe3p_LPD, the SKL_BOTTOM_COLOR_GAMMA_ENABLE and
SKL_BOTTOM_COLOR_CSC_ENABLE bits are being removed. Thus, we need not
set gamma_enable nor csc_enable in crtc_state.
Note that GAMMA_MODE.POST_CSC_GAMMA_ENABLE and CSC_MODE.ICL_CSC_ENABLE
are the documented alternatives for the bottom color bits being removed.
But as these suggested bits are being checked in state checker as part
of gamma_mode, csc_mode fields and as gamma_enable/csc_enable are not
being used anywhere else functionally post ICL, we need not set these
fields in crtc_state.
Bspec: 69734
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-7-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Starting from Xe3p_LPD, linear surfaces also support horizontal flip.
Bspec: 68904
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-6-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
On Xe3p_LPD, the dbuf blocks fields of different registers are now
documented as 13-bit fields. The dbuf isn't really large enough to need
the 13th bit, but let's go ahead and update the definition now just in
case some new display IP in future ends up needing the larger size. The
extra bit is an unused bit in previous display versions, so we can
safely just extend the existing definition.
Bspec: 69847, 69880, 72053
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-5-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Bandwidth parameters for Xe3p_LPD are the same as for Xe3_LPD. Re-use
them.
Since handling for Xe3_LPD version 30.02 is more like a special case,
let's use a "== 3002" check for it inside the ">= 30" branch instead of
adding a new branch for version 35. That allows us to re-use the ">=
30" branch for Xe3p_LPD.
v2:
- Do not have a special case for ecc_impacting_de_bw, since there are
no specific instructions in Bspec for this scenario. (Matt Roper)
v3:
- Re-use the ">= 30" branch in the if-ladder. (Matt Roper)
Bspec: 68859
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-4-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Looking at the current if-ladder in intel_bw_init_hw(), we see that
Xe2_HPD contains two entries, differing only for ECC memories. Let's
improve readability by using braces and allowing adding extra conditions
for each case.
v2:
- Tweaked commit message, since we are not going to add the ECC case
for Xe3p_LPD anymore.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-3-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The NDE_RSTWRN_OPT has been removed on Xe3p platforms and reset option
programming is no longer necessary during display init.
Bspec: 68846, 69137
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-2-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Xe3p_LPD (display version 35) is similar to Xe2_LPD with respect to the
features described by struct intel_display_device_info, so reuse its
device descriptor.
v2:
- Add reference to Bspec 74201. (Shekhar)
Bspec: 74201, 74304
Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20251103-xe3p_lpd-basic-enabling-v3-1-00e87b510ae7@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Merge two documentation fixes for 6.18-rc5, a commet typo fix in the
ACPI CPPC library (Chu Guangqing) and fixes for two ASL examples in the
firmware guide (Jonas Gorski).
* acpi-cppc:
ACPI: CPPC: Fix typo in a comment
* acpi-docs:
Documentation: ACPI: i2c-muxes: fix I2C device references
Currently the i40e driver enforces its own internally calculated per-VF MAC
filter limit, derived from the number of allocated VFs and available
hardware resources. This limit is not configurable by the administrator,
which makes it difficult to control how many MAC addresses each VF may
use.
This patch adds support for the new generic devlink runtime parameter
"max_mac_per_vf" which provides administrators with a way to cap the
number of MAC addresses a VF can use:
- When the parameter is set to 0 (default), the driver continues to use
its internally calculated limit.
- When set to a non-zero value, the driver applies this value as a strict
cap for VFs, overriding the internal calculation.
Important notes:
- The configured value is a theoretical maximum. Hardware limits may
still prevent additional MAC addresses from being added, even if the
parameter allows it.
- Since MAC filters are a shared hardware resource across all VFs,
setting a high value may cause resource contention and starve other
VFs.
- This change gives administrators predictable and flexible control over
VF resource allocation, while still respecting hardware limitations.
- Previous discussion about this change:
https://lore.kernel.org/netdev/20250805134042.2604897-2-dhill@redhat.comhttps://lore.kernel.org/netdev/20250823094952.182181-1-mheib@redhat.com
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a new device generic parameter to controls the maximum
number of MAC filters allowed per VF.
For example, to limit a VF to 3 MAC addresses:
$ devlink dev param set pci/0000:3b:00.0 name max_mac_per_vf \
value 3 \
cmode runtime
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Two Curve25519 related fixes:
- Re-enable KASAN support on curve25519-hacl64.c with gcc.
- Disable the arm optimized Curve25519 code on CONFIG_CPU_BIG_ENDIAN=y
kernels. It has always been broken in that configuration.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaQ0FSBQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKx9QAP0RbzQkYTIRcbsKkZ0SKNsVO5mpcRsJ
TybkX62xhS70FgEAiWeV9KD1XoAwwSA4eo4Y9b2joafeb6lcNBPClS5TAgg=
=YEZJ
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
"Two Curve25519 related fixes:
- Re-enable KASAN support on curve25519-hacl64.c with gcc.
- Disable the arm optimized Curve25519 code on CPU_BIG_ENDIAN
kernels. It has always been broken in that configuration"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: arm/curve25519: Disable on CPU_BIG_ENDIAN
lib/crypto: curve25519-hacl64: Fix older clang KASAN workaround for GCC
Fix an UBSAN warning that started occurring when the block layer started
supporting logical_block_size > PAGE_SIZE.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaQ0DUxQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK0E/AQDUd4N4YJ1D/vUcQXjtHnH6lkSMSRgo
ZDJmoZcwSI+28QEA31Lvjs3G1heMSpKCTcz/+C7FLwM35+9e/ZUA5z+0fQg=
=fPMw
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt fix from Eric Biggers:
"Fix an UBSAN warning that started occurring when the block layer
started supporting logical_block_size > PAGE_SIZE"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
SPEC_CTRL is an MSR, i.e. a 64-bit value, but the VMRUN assembly code
assumes bits 63:32 are always zero. The bug is _currently_ benign because
neither KVM nor the kernel support setting any of bits 63:32, but it's
still a bug that needs to be fixed.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20251106191230.182393-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Some of the new field added to socinfo structure with version 21, 22
and 23 which is only used by boot firmware and it is of no use for
Linux.Add reserve field in socinfo so that the structure remain
updated and prepared if we get any new field in future which could
be used by Linux. While at it, also updates switch case for backward
compatibility if the SoC runs with boot firmware which has these
new version added.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251104130906.167666-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for socinfo version 20. Version 20 adds a new field
package id and its zeroth bit contain information that can be
can be used to tune temperature thresholds on devices which might
be able to withstand higher temperatures. Zeroth bit value 1 means
that its heat dissipation is better and more relaxed thermal
scheme can be put in place and 0 means a more aggressive scheme
may be needed.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251104130906.167666-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Introduce __nocfi_generic for arm32 Clang (Nathan Chancellor)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaQz8RwAKCRA2KwveOeQk
u51dAP9YhHIttRev7rdRwDWwrlhO+i2fps0vq8G9S6keSndr+AEAv8BtQexexPhI
1oSNLeB/kVUVp5dQWjni48IgMxaG4A8=
=zFGT
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"This is a work-around for a (now fixed) corner case in the arm32 build
with Clang KCFI enabled.
- Introduce __nocfi_generic for arm32 Clang (Nathan Chancellor)"
* tag 'hardening-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
libeth: xdp: Disable generic kCFI pass for libeth_xdp_tx_xmit_bulk()
ARM: Select ARCH_USES_CFI_GENERIC_LLVM_PASS
compiler_types: Introduce __nocfi_generic
This code calls hfs_bnode_put(node) which drops the refcount and then
dreferences "node" on the next line. It's only safe to use "node"
when we're holding a reference so flip these two lines around.
Fixes: a06ec283e1 ("hfs: add logic of correcting a next unused CNID")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/aN-Xw8KnbSnuIcLk@stanley.mountain
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
While connecting, the MAC address can already no longer be
changed. The change is already rejected if netif_carrier_ok(),
but of course that's not true yet while connecting. Check for
auth_data or assoc_data, so the MAC address cannot be changed.
Also more comprehensively check that there are no stations on
the interface being changed - if any peer station is added it
will know about our address already, so we cannot change it.
Cc: stable@vger.kernel.org
Fixes: 3c06e91b40 ("wifi: mac80211: Support POWERED_ADDR_CHANGE feature")
Link: https://patch.msgid.link/20251105154119.f9f6c1df81bb.I9bb3760ede650fb96588be0d09a5a7bdec21b217@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, dma_fence_put(job->fence) is called in job notification
callback. However, if a job is canceled, the notification callback is never
invoked, leading to a memory leak. Move dma_fence_put(job->fence)
to the job cleanup function to ensure the fence is always released.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251105194140.1004314-1-lizhi.hou@amd.com
tb10x_set_bits() is not referenced anywhere leading to W=1 warning:
gpio-tb10x.c:59:20: error: unused function 'tb10x_set_bits' [-Werror,-Wunused-function]
After its removal, tb10x_reg_write() becomes unused as well.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251106-gpio-of-match-v1-1-50c7115a045e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In the commit referenced by the Fixes tag, clk_hw_get_clk()
was added in va_macro_probe() to get the fsgen clock,
but forgot to add the corresponding clk_put() in va_macro_remove().
This leads to a clock reference leak when the driver is unloaded.
Switch to devm_clk_hw_get_clk() to automatically manage the
clock resource.
Fixes: 30097967e0 ("ASoC: codecs: va-macro: use fsgen as clock")
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20251106143114.729-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The BCM2712 SoC has PM block but lacks the "asb" and "rpivid_asb"
register spaces, and doesn't need clock(s). Add a compatible
string for bcm2712 to allow probe of bcm2835-wdt and
bcm2835-power drivers.
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250917063233.1270-4-svarbanov@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f5 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT")
Cc: Fangzhi Zuo <jerry.zuo@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62320fb8d9)
Cc: stable@vger.kernel.org
For a mode-1 reset done at the end of S3 on PSPv11 dGPUs, only check if
TOS is unloaded.
Fixes: 32f73741d6 ("drm/amdgpu: Wait for bootloader after PSPv11 reset")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4649
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ad25fd272)
commit c760bcda83 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda83 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4104c0a454)
Allow the SPI_FSL_QUADSPI Kconfig option to be selected if ARCH_SPACEMIT
enabled.
Add support for the SpacemiT K1 SoC in the Freescale QSPI driver by
defining the device type data for its QSPI implementation.
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-8-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In fsl_qspi_default_setup(), four registers define the size of blocks of
data to written to each of four chips that comprise SPI NOR flash storage.
They are currently defined to be the same as the AHB buffer size.
The SpacemiT QSPI has an AHB buffer size of 512 bytes, but requires these
four sizes to be multiples of 1024 bytes.
Define a new field sfa_size in the fsl_qspi_devtype_data structure that, if
non-zero, will be used instead of the AHB buffer size to define the size of
these chip regions.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-7-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SpacemiT K1 SoC QSPI implementation needs to avoid shutting off the
clock when changing its rate. Add a new quirk to indicate that disabling
and enabling the clock should be skipped when changing its rate.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-6-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change all the needs_*() functions so they are no longer inline, and return
bool rather than int.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-5-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for one or more optional exclusive resets. These simply need
to be deasserted at probe time, and can remain that way for the life of the
device.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-4-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow two resets to be defined to support the SpacemiT K1 SoC QSPI IP.
Move the allOf block down, below the required section.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-3-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the SpacemiT K1 SoC QSPI IP to the list of supported hardware. This
is the first non-Freescale device represented here. It has a nearly
identidal register set, and this binding correctly describes the hardware.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251027133008.360237-2-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d1b32cfe4)
A user reports that on their Lenovo Corsola Magneton with EC firmware
steelix-15194.270.0 the driver probe fails with EINVAL. It turns out
that the power LED does not contain any color components as indicated
by the following "ectool led power query" output:
Brightness range for LED 1:
red : 0x0
green : 0x0
blue : 0x0
yellow : 0x0
white : 0x0
amber : 0x0
The LED also does not react to commands sent manually through ectool and
is generally non-functional.
Instead of failing the probe for all LEDs managed by the EC when one
without color components is encountered, silently skip those.
Cc: stable@vger.kernel.org
Fixes: 8d6ce6f3ec ("leds: Add ChromeOS EC driver")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251028-cros_ec-leds-no-colors-v1-1-ebe13a02022a@weissschuh.net
Signed-off-by: Lee Jones <lee@kernel.org>
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready message"
caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low granularity
of timers set relatively far in the future, and use it where it matters
(e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB, multicast
- phy: lan8842: implement latest errata
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=a/Ml
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
The Sharp LQ116M1JW105 reports that it supports 8 bpc modes,
but it will happen display noise in some videos.
So, limit it to 6 bpc modes.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20251101040043.3768848-1-ajye_huang@compal.corp-partner.google.com
The kernel-doc in lib/hweight.c is global to the file and
currently has issues:
Warning: lib/hweight.c:13 expecting prototype for hweightN(). Prototype was for __sw_hweight32() instead
Warning: lib/hweight.c:13 function parameter 'w' not described in '__sw_hweight32'
Update it accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
In accordance with the history and nature of the operation
add lib/hweight.c to the BITOPS record in MAINTAINERS.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
