Since uic_command::cmd_active is used as a boolean variable, change its
type from 'int' into 'bool'. No functionality has been changed.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make it easier to find the sections in the UFSHCI standard where these
constants come from.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some systems, e.g. Rock 4D, have a pluggable UFS module. Link startup
fails systematically on these systems. If no UFS module has been plugged
in, more than fourty lines are logged after the "link startup failed"
message. Avoid this by reducing link startup failure logging.
An intended side effect of this patch is that scsi_host_busy() is not
called before scsi_add_host() is called.
Commit 995412e23b ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced a regression - the warning shown below is
triggered during every boot. This patch fixes that regression.
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufs_sysfs_add_nodes() is called concurrently with ufs_get_device_desc().
This may cause the following code to be called before
ufs_sysfs_add_nodes():
sysfs_update_group(&hba->dev->kobj, &ufs_sysfs_hid_group);
If this happens, ufs_sysfs_add_nodes() triggers a kernel warning and
fails. Fix this by calling ufs_sysfs_add_nodes() before SCSI LUNs are
scanned since the sysfs_update_group() call happens from the context of
thread that executes ufshcd_async_scan(). This patch fixes the following
kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Fixes: bb7663dec6 ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
According to UFS specifications, the power-off sequence for a UFS device
includes:
- Sending an SSU command with Power_Condition=3 and await a response.
- Asserting RST_N low.
- Turning off REF_CLK.
- Turning off VCC.
- Turning off VCCQ/VCCQ2.
As part of ufs shutdown, after the SSU command completion, asserting
hardware reset (HWRST) triggers the device firmware to wake up and
execute its reset routine. This routine initializes hardware blocks and
takes a few milliseconds to complete. During this time, the ICCQ draws a
large current.
This large ICCQ current may cause issues for the regulator which is
supplying power to UFS, because the turn off request from UFS driver to
the regulator framework will be immediately followed by low power
mode(LPM) request by regulator framework. This is done by framework
because UFS which is the only client is requesting for disable. So if
the rail is still in the process of shutting down while ICCQ exceeds LPM
current thresholds, and LPM mode is activated in hardware during this
state, it may trigger an overcurrent protection (OCP) fault in the
regulator.
To prevent this, a 10ms delay is added after asserting HWRST. This
allows the reset operation to complete while power rails remain active
and in high-power mode.
Currently there is no way for Host to query whether the reset is
completed or not and hence this the delay is based on experiments with
Qualcomm UFS controllers across multiple UFS vendors.
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251012173828.9880-1-nitin.rawat@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When the OpenCSD library introduces a new enumeration value (for example,
in the v1.7.1 release), the perf build fails with an error:
util/cs-etm-decoder/cs-etm-decoder.c:600:10: error: enumeration value 'OCSD_GEN_TRC_ELEM_ITMTRACE' not explicitly handled in switch [-Werror, -Wswitch-enum]
600 | switch (elem->elem_type) {
| ^~~~~~~~~~~~~~~
1 error generated.
Convert to if-else sentences to mute the enumeration value warning,
which can avoid build failures whenever the lib is updated.
No functional change.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
We should wait for the rdma_cm to become SMBDIRECT_SOCKET_DISCONNECTED!
At least on the client side (with similar code)
wait_event_interruptible() often returns with -ERESTARTSYS instead of
waiting for SMBDIRECT_SOCKET_DISCONNECTED.
We should use wait_event() here too, which makes the code be identical
in client and server, which will help when moving to common functions.
Fixes: b31606097d ("smb: server: move smb_direct_disconnect_rdma_work() into free_transport()")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Daniel Golle says:
====================
net: dsa: lantiq_gswip: use regmap for register access
This series refactors the lantiq_gswip driver to utilize the regmap API
for register access, replacing the previous approach of open-coding
register operations.
Using regmap paves the way for supporting different busses to access the
switch registers, for example it makes it easier to use an MDIO-based
method required to access the registers of the MaxLinear GSW1xx series
of dedicated switch ICs.
Apart from that, the use of regmap improves readability and
maintainability of the driver by standardizing register access.
When ever possible changes were made using Coccinelle semantic patches,
sometimes adjusting white space and adding line breaks when needed.
The remaining changes which were not done using semantic patches are
small and should be easy to review and verify.
The whole series has been
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
====================
Link: https://patch.msgid.link/cover.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'clear' parameter of gswip_mii_mask_cfg() and gswip_mii_mask_pcdu()
is inconsistent with the semantics of regmap_write_bits() which also
applies the mask to the value to be written.
Change the semantic mask/set of the functions gswip_mii_mask_cfg() and
gswip_mii_mask_pcdu() to follow the regmap_write_bits() pattern.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Link: https://patch.msgid.link/218854236c97a152af071852bda83d02ff2dd918.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Further optimize the previous naive conversion of the *_mask() accessor
functions to regmap_write_bits by manually removing redundant mask
operands.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Link: https://patch.msgid.link/fce2f964b22fe3efc234c664b1e50de28dddf512.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use regmap for register access in preparation for supporting the MaxLinear
GSW1xx family of switches connected via MDIO or SPI.
Rewrite the existing accessor read-poll-timeout functions to use calls to
the regmap API for now.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Link: https://patch.msgid.link/535d968bc6319a74bdf76166ef19364ee659285f.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comment above writing the default PVID incorrectly states that
"GSWIP 2.2 (GRX300) and later program here the VID directly."
The truth is that even GSWIP 2.2 and newer maintain the behavior of
GSWIP 2.1 unless the VLANMD bit in PCE Global Control Register 1 is
set ("GSWIP2.2 VLAN Mode").
Fix the misleading comment accordingly.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Link: https://patch.msgid.link/018056a575503d9797f3222f71a988e825316be0.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'if (!key && hash_location)' check in tcp_inbound_md5_hash() implies
that hash_location might be null. However, later code in the function
dereferences hash_location anyway, without checking for null first.
Fortunately, there is no real bug, since tcp_inbound_md5_hash() is
called only with non-null values of hash_location.
Therefore, remove the unnecessary and misleading null check of
hash_location. This silences a Smatch static checker warning
(https://lore.kernel.org/netdev/aPi4b6aWBbBR52P1@stanley.mountain/)
Also fix the related comment at the beginning of the function.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20251022221209.19716-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 620a50c927 ("io_uring: uring_cmd: add multishot support") added
multishot uring_cmd support with explicit buffer upfront commit via
io_uring_mshot_cmd_post_cqe(). However, the buffer selection path in
io_ring_buffer_select() was auto-committing buffers for non-pollable files,
which conflicts with uring_cmd's explicit upfront commit model.
This way consumes the whole selected buffer immediately, and causes
failure on the following buffer selection.
Fix this by checking uring_cmd to identify operations that handle buffer
commit explicitly, and skip auto-commit for these operations.
Cc: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 620a50c927 ("io_uring: uring_cmd: add multishot support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In virtio-net, we have not yet supported multi-buffer XDP packet in
zerocopy mode when there is a binding XDP program. However, in that
case, when receiving multi-buffer XDP packet, we skip the XDP program
and return XDP_PASS. As a result, the packet is passed to normal network
stack which is an incorrect behavior (e.g. a XDP program for packet
count is installed, multi-buffer XDP packet arrives and does go through
XDP program. As a result, the packet count does not increase but the
packet is still received from network stack).This commit instead returns
XDP_ABORTED in that case.
Fixes: 99c861b44e ("virtio_net: xsk: rx: support recv merge mode")
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20251022155630.49272-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The root cause of this issue are:
1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0);
put the kevent work in global workqueue. However, the kevent has not yet
been scheduled when the usbnet device is unregistered. Therefore, executing
free_netdev() results in the "free active object (kevent)" error reported
here.
2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(),
if the usbnet device is up, ndo_stop() is executed to cancel the kevent.
However, because the device is not up, ndo_stop() is not executed.
The solution to this problem is to cancel the kevent before executing
free_netdev().
Fixes: a69e617e53 ("usbnet: Fix linkwatch use-after-free on disconnect")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the long-standing comment in unix_release_sock() that described a
behavioral difference between Linux and BSD regarding when ECONNRESET is
sent to connected UNIX sockets upon closure.
As confirmed by testing on macOS (similar to BSD behavior), ECONNRESET
is only observed for SOCK_DGRAM sockets, not for SOCK_STREAM. Meanwhile,
Linux already returns ECONNRESET in cases where a socket is closed with
unread data or is not yet accept()ed. This means the previous comment no
longer accurately describes current behavior and is misleading.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251021195906.20389-1-adelodunolaoluwa@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch does not introduce any logical change, it just removes
duplicated code in airoha_regs.h.
Fix naming conventions in airoha_regs.h.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251022-airoha-regs-cosmetics-v2-1-e0425b3f2c2c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- brcmfmac: long-standing crash when used w/o P2P
- iwlwifi: fix for a use-after-free bug
- mac80211: key tailroom accounting bug could leave
allocation overhead and cause a warning
- ath11k: add a missing platform,
fix key flag operations
- bcma: skip devices disabled in OF/DT
- various (potential) memory leaks
-----BEGIN PGP SIGNATURE-----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=Zi4K
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-10-23' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
First set of fixes:
- brcmfmac: long-standing crash when used w/o P2P
- iwlwifi: fix for a use-after-free bug
- mac80211: key tailroom accounting bug could leave
allocation overhead and cause a warning
- ath11k: add a missing platform,
fix key flag operations
- bcma: skip devices disabled in OF/DT
- various (potential) memory leaks
* tag 'wireless-2025-10-23' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: nl80211: call kfree without a NULL check
wifi: mac80211: fix key tailroom accounting leak
wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode
MAINTAINERS: wcn36xx: Add linux-wireless list
bcma: don't register devices disabled in OF
wifi: mac80211: reset FILS discovery and unsol probe resp intervals
wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()
wifi: ath11k: avoid bit operation on key flags
wifi: ath12k: free skb during idr cleanup callback
wifi: ath11k: Add missing platform IDs for quirk table
wifi: ath10k: Fix memory leak on unsupported WMI command
====================
Link: https://patch.msgid.link/20251023180604.626946-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark has been kindly helping fill in when I have been unavailable over
the past several years. He has also put his hand up to take over
linux-next maintenance when I finally decide to stop (which may be some
time yet ;-) ).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both mt8195-afe-pcm and mt8365-afe-pcm drivers use devm_pm_runtime_enable()
in probe function, which automatically calls pm_runtime_disable() on device
removal via devres mechanism. However, the remove callbacks explicitly call
pm_runtime_disable() again, resulting in double pm_runtime_disable() calls.
Fix by removing the redundant pm_runtime_disable() calls from remove
functions, letting the devres framework handle it automatically.
Fixes: 2ca0ec01d4 ("ASoC: mediatek: mt8195-afe-pcm: Simplify runtime PM during probe")
Fixes: e1991d102b ("ASoC: mediatek: mt8365: Add the AFE driver support")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251020170440.585-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
- A bug caused a kernel panic when reading enabled_monitors was reported.
Change callbacks functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading to
potential build errors on systems without an MMU. Add that kconfig
dependency.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaPqYBRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrZjAQC02FScGQM+TTQ2kvIFAscKEfZddks9
iiodkKWxMTZoxwD/VxXKQUD8CP2HW9uSpJw/O3Zv+NAU80Eq8V2f7/0d9gw=
=AnZN
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
The bspec was originally missing the information related to steering of
L3-related ranges. Now that a late-breaking spec update has added the
necessary information, implement the steering rules in the code. Note
that the sole L3BANK range is the same as the one used on Xe_LPG, so we
can re-use the existing table for that MCR type.
Bspec: 74418
Fixes: be614ea19d ("drm/xe/xe3p_xpc: Add MCR steering")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251021224556.437970-3-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Masahiro Yamada stepped down as Kbuild and Kconfig maintainer in
commit 8d6841d5cb ("MAINTAINERS: hand over Kbuild maintenance"),
leaving Kconfig officially orphaned and handing Kbuild over to Nicolas
and myself. Since then, there have been a few simple patches to Kconfig
that have ended up on the linux-kbuild mailing list without clear
direction on who will take them, as they are not really sent to anybody
officially, although the list is obviously watched by the Kbuild
maintainers.
Make Nicolas and I official maintainers of Kconfig in "Odd Fixes"
status, similar to Kbuild, so that the subsystem has clear points of
contact for contributors, even if significant contributions may not be
accepted.
Additionally, add the Kbuild tree to this section.
Acked-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251023-update-kconfig-maintainers-v1-1-0ebd5b4ecced@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This is a preparation patch, no functional change.
Signed-off-by: Hongru Zhang <zhanghongru@xiaomi.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
On mobile device high-load situations, permission check can happen
more than 90,000/s (8 core system). With default 512 cache nodes
configuration, avc cache miss happens more often and occasionally
leads to long time (>2ms) irqs off on both big and little cores,
which decreases system real-time capability.
An actual call stack is as follows:
=> avc_compute_av
=> avc_perm_nonode
=> avc_has_perm_noaudit
=> selinux_capable
=> security_capable
=> capable
=> __sched_setscheduler
=> do_sched_setscheduler
=> __arm64_sys_sched_setscheduler
=> invoke_syscall
=> el0_svc_common
=> do_el0_svc
=> el0_svc
=> el0t_64_sync_handler
=> el0t_64_sync
Although we can expand avc nodes through /sys/fs/selinux/cache_threshold
to mitigate long time irqs off, hash conflicts make the bucket average
length longer because of the fixed size of cache slots, leading to
avc_search_node() latency increase.
So introduce a new config to make avc cache slot size also configurable,
and with fine tuning, we can mitigate long time irqs off with slightly
avc_search_node() performance regression.
Theoretically, the main overhead is memory consumption.
Signed-off-by: Hongru Zhang <zhanghongru@xiaomi.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Early versions of the B-spec originally indicated that Xe3p_XPC had two
ranges of PSMI registers requiring MCR steering (one starting at 0xB500,
one starting at 0xB600), and that reads of registers in these ranges
required different grpid values to ensure that a non-terminated value is
obtained. A late-breaking spec update has simplified this; both ranges
can be safely steered to grpid=0 for reads.
Drop the "PSMI19" replication type and related code, and consolidate
both register ranges into a single entry in the "INSTANCE0" steering
table.
Bspec: 74418
Fixes: be614ea19d ("drm/xe/xe3p_xpc: Add MCR steering")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251021224556.437970-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Add cputype definitions for Cortex-A720AE. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-A720AE TRM:
https://developer.arm.com/documentation/102828/0001/
... in Table A-187
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Clang and GCC disagree with what constitutes a "declaration after
statement". GCC allows declarations in switch cases without an extra
block, as long as it's immediately after the label. Clang does not.
Unfortunately this is the case even in the latest versions of both
compilers. The only option that makes them behave in the same way is
-Wpedantic, which can't be enabled in Perf because of the number of
warnings it generates.
Add a block to fix the Clang build, which is the only thing we can do.
Fixes the build error:
ui/browsers/annotate.c:999:4: error: expected expression
struct annotation_line *al = NULL;
ui/browsers/annotate.c:1008:4: error: use of undeclared identifier 'al'
al = annotated_source__get_line(notes->src, offset);
ui/browsers/annotate.c:1009:24: error: use of undeclared identifier 'al'
browser->curr_hot = al ? &al->rb_node : NULL;
ui/browsers/annotate.c:1009:30: error: use of undeclared identifier 'al'
browser->curr_hot = al ? &al->rb_node : NULL;
ui/browsers/annotate.c:1000:8: error: mixing declarations and code is incompatible with standards before C99 [-Werror,-Wdeclaration-after-statement]
s64 offset = annotate_browser__curr_hot_offset(browser);
Fixes: ad83f3b715 ("perf c2c annotate: Start from the contention line")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
I noticed by chance that there's actually already a pointer to this in
struct drm_gem_object. So, no use in carrying this around!
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20251021172220.252558-1-lyude@redhat.com
Each route connects two widgets, so in this patch, the widget "AIFOUT2L"
audio interface output left secondary mic and "AIFOUT2R" audio interface
output right secondary mic is connected to "SHDN" and also to "SDIEN".
Route with "SHDN" as source is required because "SHDN" controls the
shutdown and must be ON for codec to operate. Therefore, "AIFOUT2L" and
"AIFOUT2R" must be active when "SHDN" is ON. Route with "SDIEN"
is required as serial interface logic must be enabled, that means
serial port must be enabled, which ensures I2S/TDM clocks and serial data
lines are running. This is also the case with audio interface outputs
"AIFOUTL" and "AIFOUTR" in primary mic.
Signed-off-by: Sharique Mohammad <sharq0406@gmail.com>
Link: https://patch.msgid.link/20251023142044.2247989-1-sharq0406@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have helpers SVM range start, end, and size. Use them in the PT
layer rather than directly looking at the struct.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251022230122.922382-1-matthew.brost@intel.com
for 6.18, please pull the following:
- Peter describes the VGIC interrupt line such that KVM can be used on
Raspberry Pi 5 systems.
-----BEGIN PGP SIGNATURE-----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=4aSE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5veY
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 6.18, please pull the following:
- Peter describes the VGIC interrupt line such that KVM can be used on
Raspberry Pi 5 systems.
* tag 'arm-soc/for-6.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
6.18, please pull the following:
- Stefan switches the V3D block to use the firmware clock, rather than
the bare metal clock. This fixes hangs on boot after recent changes to
the V3D driver clocking went in.
-----BEGIN PGP SIGNATURE-----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=3g/p
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmj6kGcACgkQmmx57+YA
GNnryxAAjU4l7AgkepcXlOdya4LpQZXmKQICOSo78QSbnFdqW7Y7DHGU/uUVI1JH
C7A+keTUCiVSvyfUKkRY/bDn57MPoK7HJwquGqPdqD9F8BJJBciVmiaUlXiF+K5u
Z17dY5n9TjAu6HeH/2e+wuoK9qWHe3SSTaopC667so1gw/c0ZnKEVeAruDCu3230
+ZJ08VUDQta8Ti9bojee2G67aS/kNdSCQCWKaDErp233bJcq89VTsbQ6/1HGdWA+
Xwh12zZCTB7mcOZmxA0WzEOxR30LkrKnwZlxW52X0O1aNzZt5qQeagSfdtcSR7hS
gkvql/Dolw3qPbBsSfT/DVUxSqPvSxevY6k4Q5Wsh/gjzEf1NZxQd58/8LaZq+dS
TWYpoOlOEoNWAH7P+vBWX6lKkM/XJhn/PugBk6/+QnRdhcAZL7tWUN0vNFQ5Is9K
FBh6RMKBmy7jpEtY5/1YdCDjBdmd5FsoFbM7i7sQTTtY4PsLYAzWVXRB2021dxZ7
S6OqEZxHsMQLmb3/V+3GQiqYkOrtwjzFWo5ELo+yks58lxYHf+Y2DLfNGMJr+Cry
hLU7adMDxDxKWeC1J/RumdgFp6crsDkFMbGui/vUmoNXdVtT0akjfUQteB2CdzRG
iPsEARJiqNZ6dnVhdIRs9GKFMLMb0r1A+20Oi0cEWmwlbO0y+nc=
=O7I1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.18, please pull the following:
- Stefan switches the V3D block to use the firmware clock, rather than
the bare metal clock. This fixes hangs on boot after recent changes to
the V3D driver clocking went in.
* tag 'arm-soc/for-6.18/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
-----BEGIN PGP SIGNATURE-----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=2mq1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmj6kE0ACgkQmmx57+YA
GNlItw/+KprSMkb+gVY8DgCgMXpku4ObDwryI16UbBxjIVlLlhE0mc58vooY43nz
NQLZ9GU7rQygVr8mEK0LxWMt7Fm0x8w/omvwgsKuPVifNCGWEvOlEXqJGGLoThGB
msU3CJDPDo0C3bgXDu9sbQZOxEYMnIwqnBzUuuzHxiftGP14XevSjy/dlCjSRy0K
DlfIxZaQY0Rwhe5XoH6TLC99QHNRvvP1MmoMyerzTi91Lwvcx98URgZta7N230Me
R9uQLStxKyBRDIW+Z0uDnCDAltQvy3UHtGd240GS9aK1Cs2tbBQ9G79hHEMfj/us
N7cgDFZHEHuTk8d71bMSiwmoQLFsmjbAAS6pBUbE3K3WP76w37N7/cIA78WVvG1O
FcIDM0cTePHimlI9bDF12GJ1tT6punh6NtjBJVGx1NIjo9LFJaTx1rBC/BgQzIY7
Um1eF76/ciZK3gOnlPRrYSuAEIhoPSxRIgOBlWLCuAZmjW5v/F3SdqNPkZ8i5Oo/
PkJEIPIT2nFEtvGg34RcRsh/9OtGQi03HM7/iFuc8dCUuJDwj/h7luN5FOCwcQqE
Cu1eEqWIWiE0rdI4pjmzTXRHqH8LrWk7oTakrvL9WWGdjF72Ceay3Z0disFDPN1c
85N5mXohiznQsdv+p62DnyW4ZoRn6uOy9YpJjRAN+5PezV5nXDc=
=12z8
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.18
This series contains a set of small, focused fixes that address
robustness and lifecycle issues in the Arm SCMI core and debug support,
ensuring safer handling of debug initialization failures, correct flag
management in raw mode, and consistent inflight counter tracking.
Brief summary:
- Fix raw xfer flag clearing
- Skip RAW debug initialization on failure
- Make inflight counter helpers null-safe, preventing crashes if debug
initialization fails
- Account for failed debug initialization globally
There is no functional change for standard SCMI operation, but these
fixes improve stability in debug and raw modes, particularly in error
paths.
* tag 'scmi-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The FF-A driver was updated to support specification version 1.2 but omitted
support for the 16-byte implementation-defined (IMPDEF) field introduced in
FF-A v1.2 within the Endpoint Memory Access Descriptor (EMAD). This omission
breaks all memory interfaces.
This change updates the EMAD sizing and offset logic to correctly handle the
FF-A v1.2 layout while preserving backward compatibility with older versions.
-----BEGIN PGP SIGNATURE-----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=RowC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ChU3
-----END PGP SIGNATURE-----
Merge tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.18
The FF-A driver was updated to support specification version 1.2 but omitted
support for the 16-byte implementation-defined (IMPDEF) field introduced in
FF-A v1.2 within the Endpoint Memory Access Descriptor (EMAD). This omission
breaks all memory interfaces.
This change updates the EMAD sizing and offset logic to correctly handle the
FF-A v1.2 layout while preserving backward compatibility with older versions.
* tag 'ffa-fix-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
-----BEGIN PGP SIGNATURE-----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=3tTN
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Do not make a clean PTE dirty in pte_mkwrite()
The Arm architecture, for backwards compatibility reasons (ARMv8.0
before in-hardware dirty bit management - DBM), uses the PTE_RDONLY
bit to mean !dirty while the PTE_WRITE bit means DBM enabled. The
arm64 pte_mkwrite() simply clears the PTE_RDONLY bit and this
inadvertently makes the PTE pte_hw_dirty(). Most places making a PTE
writable also invoke pte_mkdirty() but do_swap_page() does not and we
end up with dirty, freshly swapped in, writeable pages.
- Do not warn if the destination page is already MTE-tagged in
copy_highpage()
In the majority of the cases, a destination page copied into is
freshly allocated without the PG_mte_tagged flag set. However, the
folio migration may be restarted if __folio_migrate_mapping() failed,
triggering the benign WARN_ON_ONCE().
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not warn if the page is already tagged in copy_highpage()
arm64, mm: avoid always making PTE dirty in pte_mkwrite()
The switch_brightness_work delayed work accesses device->brightness
and device->backlight, freed by acpi_video_dev_unregister_backlight()
during device removal.
If the work executes after acpi_video_bus_unregister_backlight()
frees these resources, it causes a use-after-free when
acpi_video_switch_brightness() dereferences device->brightness or
device->backlight.
Fix this by calling cancel_delayed_work_sync() for each device's
switch_brightness_work in acpi_video_bus_remove_notify_handler()
after removing the notify handler that queues the work. This ensures
the work completes before the memory is freed.
Fixes: 8ab58e8e7e ("ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Yuhao Jiang <danisjiang@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
[ rjw: Changelog edit ]
Link: https://patch.msgid.link/20251022200704.2655507-1-danisjiang@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
retsnoop's build on powerpc (ppc64le) architecture ([0]) failed due to
wrong definition of PT_REGS_SP() macro. Looking at powerpc's
implementation of stack unwinding in perf_callchain_user_64() clearly
shows that stack pointer register is gpr[1].
Fix libbpf's definition of __PT_SP_REG for powerpc to fix all this.
[0] https://kojipkgs.fedoraproject.org/work/tasks/1544/137921544/build.log
Fixes: 138d6153a1 ("samples/bpf: Enable powerpc support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/20251020203643.989467-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
