led_banks contains LED module number(s) that should be grouped into the
module bank. led_banks is 0-initialized.
By checking the led_banks entries for 0, un-set entries are detected.
But a 0-entry also indicates that LED module 0 should be grouped into the
module bank.
By only iterating over the available entries no check for unused entries
is required and LED module 0 can be added to bank.
Cc: stable@vger.kernel.org
Fixes: 242b81170f ("leds: lp50xx: Add the LP50XX family of the RGB LED driver")
Signed-off-by: Christian Hitz <christian.hitz@bbv.ch>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://patch.msgid.link/20251008123222.1117331-1-christian@klarinett.li
Signed-off-by: Lee Jones <lee@kernel.org>
Marking the qcom_spi_ecc_engine_ops_pipelined as const provides
memory protection by preventing accidental modification of critical
function pointers at runtime. It also enables memory optimization
by placing the structure in read-only sections and improves code safety
by explicitly documenting the design intent that these operations
should not change after initialization.
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Link: https://patch.msgid.link/20251023024250.3181084-1-pengcan@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Node names are already and properly checked by the core schema. No need
to do it again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251020060951.30776-10-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pinctrl-rtd driver uses 'devm_regmap_init_mmio', which requires
'REGMAP_MMIO' to be enabled.
Without this selection, the build fails with an undefined reference:
aarch64-none-linux-gnu-ld: drivers/pinctrl/realtek/pinctrl-rtd.o: in
function rtd_pinctrl_probe': pinctrl-rtd.c:(.text+0x5a0): undefined
reference to __devm_regmap_init_mmio_clk'
Fix this by selecting 'REGMAP_MMIO' in the Kconfig.
Fixes: e99ce78030 ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs")
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for PMR735D PMIC voltage regulators which are present on
Kaanapali boards.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023-pmr735d_regulator-v2-2-452e1b28cd38@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for PMR735D PMIC used on Kaanapali boards.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251023-pmr735d_regulator-v2-1-452e1b28cd38@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function topology feature, and the plat_data->machine field that
specifies this feature, is ACPI specific. The check didn't take this
into consideration, which causes a NULL pointer dereference splat on
OF platforms:
BUG: KASAN: null-ptr-deref in sof_create_ipc_file_profile (sound/soc/sof/fw-file-profile.c:291 sound/soc/sof/fw-file-profile.c:340) snd_sof
Read of size 8 at addr 00000000000000c8 by task (udev-worker)/247
CPU: 7 UID: 0 PID: 247 Comm: (udev-worker) Not tainted 6.18.0-rc2-next-20251023-03804-g93b191bc0c26-dirty #747 PREEMPT ba3c303a11d89508de4087cb5b4f8985b6d87b6f
Hardware name: Google Ciri sku2 board (DT)
Call trace:
[KASAN stuff]
sof_create_ipc_file_profile (sound/soc/sof/fw-file-profile.c:291 sound/soc/sof/fw-file-profile.c:340) snd_sof
snd_sof_device_probe (sound/soc/sof/core.c:304 sound/soc/sof/core.c:388 sound/soc/sof/core.c:460 sound/soc/sof/core.c:719) snd_sof
sof_of_probe (sound/soc/sof/sof-of-dev.c:84) snd_sof_of
platform_probe (drivers/base/platform.c:1405)
[...]
Check that the ACPI specific field is actually valid before accessing
it.
This was seen on a MediaTek based Chromebook.
Fixes: 2b92b98cc4 ("ASoC: SOF: Don't print the monolithic topology name if function topology may be used")
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251023061226.1127345-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSD format supported by micfil is that oldest bit is in bit 31, so
the format should be DSD little endian format.
Fixes: 21aa330fec ("ASoC: fsl_micfil: Add decimation filter bypass mode support")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20251023064538.368850-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSD little endian format requires the msb first, because oldest bit
is in msb.
found this issue by testing with pipewire.
Fixes: c111c2ddb3 ("ASoC: fsl_sai: Add PDM daifmt support")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20251023064538.368850-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The data probing is a debug feature. Currently parameters channels and
rate specified by the application are read while the format is ignored.
More robust approach is to read all of them.
Audio format, while not used by the Probe module for PCM streaming,
takes part in the gateway initialization on the DSP side. With full
parametrization we gain better coverage with the data probing feature.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251023092348.3119313-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio
stream while period-elapsed work services its IRQs. As the former
frees the DAI's private context, these two operations shall be
synchronized to avoid slab-use-after-free or worse errors.
Fixes: 0dbb186c35 ("ASoC: Intel: avs: Update stream status in a separate thread")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251023092348.3119313-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pcm->prepare() function may be called multiple times in a row by the
userspace, as mentioned in the documentation. The driver shall take that
into account and prevent redundancy. However, the exact same function is
called during XRUNs and in such case, the particular stream shall be
reset and setup anew.
Fixes: 9114700b49 ("ASoC: Intel: avs: Generic PCM FE operations")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251023092348.3119313-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The generic_handle_domain_irq() function resolves the hardware IRQ
internally. The driver performed a duplicative mapping by calling
irq_find_mapping() first, which could lead to an RCU stall.
Delete the redundant irq_find_mapping() call and pass the hardware IRQ
directly to generic_handle_domain_irq().
Fixes: c5a4b6fd31 ("gpio: Add support for Intel LJCA USB GPIO driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251023070231.1305-1-vulab@iscas.ac.cn
[Bartosz: remove unused variable]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The AMD Seattle DWC AHCI is behind an IOMMU and has 1-3 entries, so add
the 'iommus' property. There's not a specific compatible, so we can't
limit it to Seattle.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
strcpy() is deprecated; use strscpy() instead.
Replace the hard-coded buffer size 8 with sizeof(mbuf) when using
snprintf() while we're at it.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The backlight interfaces don't require anything from <linux/fb.h>, so
don't include it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patch.msgid.link/20251013105553.836715-1-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
This callback was undocumented, add the docs.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO chips often have data input and output registers aliased to the
same offset. The output register is non-valitile and could in theory be
cached. The input register however is volatile by nature and hence
should not be cached, resulting in different requirements for reads and
writes.
The generic gpio chip implementation stores a shadow value of the pin
output data, which is updated and written to hardware on output data
changes in bgpio_set(), bgpio_set_set(). Pin input values are always
obtained by reading the aliased data register from hardware.
For gpio-regmap the situation is more complex as the output data could
be in multiple registers, but we can use the regmap cache to shadow the
output values when marking the data registers as non-volatile. By using
regmap_read_bypassed() we can still treat the input values as volatile,
irrespective of the regmap config. This ensures proper functioning of
writing the output register with regmap_write_bits(), which will then
use and update the cache only on data writes, gaining some performance
from the cached output values.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20251021142407.307753-3-sander@svanheule.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO chips often have data input and output fields aliased to the same
offset. Since gpio-regmap performs a value update before the direction
update (to prevent glitches), a pin currently configured as input may
cause regmap_update_bits() to not perform a write.
This may cause unexpected line states when the current input state
equals the requested output state:
OUT IN OUT
DIR ''''''\...|.../''''''
pin ....../'''|'''\......
(1) (2) (3)
1. Line was configurad as out-low, but is reconfigured to input.
External logic results in high value.
2. Set output value high. regmap_update_bits() sees the value is
already high and discards the register write.
3. Line is switched to output, maintaining the stale output config
(low) instead of the requested config (high).
By switching to regmap_write_bits(), a write of the requested output
value can be forced, irrespective of the read state. Do this only for
aliased registers, so the more efficient regmap_update_bits() can still
be used for distinct registers.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20251021142407.307753-2-sander@svanheule.net
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Merge an ACPI device properties handling change fixing the order of
__acpi_node_get_property_reference() arguments broken by a recent
update (Sunil V L)
* 'acpi-property':
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
Merge cpuidle and cpufreq fixes for 6.18-rc3:
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)
* pm-cpuidle:
Revert "cpuidle: menu: Avoid discarding useful information"
* pm-cpufreq:
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
The lan8814 has 4 different SKUs and for 2 of these SKUs the PTP is
disabled. All these SKUs have the same value in the register 2 and 3.
Meaning that we can't differentiate them based on device id, therefore
check the SKU register and based on this allow or not to create a PTP
device.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251021070726.3690685-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the send_peer_notif counter and the peer event notify are not synchronized.
It may cause problems such as the loss or dup of peer notify event.
Before this patch:
- If should_notify_peers is true and the lock for send_peer_notif-- fails, peer
event may be sent again in next mii_monitor loop, because should_notify_peers
is still true.
- If should_notify_peers is true and the lock for send_peer_notif-- succeeded,
but the lock for peer event fails, the peer event will be lost.
This patch locks the RTNL for send_peer_notif, events, and commit simultaneously.
Fixes: 07a4ddec3c ("bonding: add an option to specify a delay between peer notifications")
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Vincent Bernat <vincent@bernat.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Tonghao Zhang <tonghao@bamaicloud.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20251021050933.46412-1-tonghao@bamaicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for NPU6 generation that will be present on Nova Lake CPUs.
As with previous generations, it maintains compatibility
so no bigger functional changes apart from removing
deprecated call to soc_cpu_drive() function.
Quiescing TOP_MMIO in SOC_CPU_NOC as part of boot procedure is no longer
needed starting from 60XX. Remove soc_cpu_drive() call from NPU6 onward.
The VPU_CPU_NOC_QREQN, VPU_CPU_NOC_QACCEPTN, and VPU_CPU_NOC_QDENY
registers are deprecated and non-functional on 60XX. They will be
removed in future generations.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20251022105348.2237273-1-maciej.falkowski@linux.intel.com
This reverts commit 56a232d93c.
The above commit changed the position of pm_wakeup_clear() for the
suspend call path, but other call paths with references to
freeze_processes() were not updated. This means that other call
paths, such as hibernate(), will not have pm_wakeup_clear() called.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Samuel Wu <wusamuel@google.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251022222830.634086-1-wusamuel@google.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add platform definition and PCI IDs for Crescent Island.
Other platforms use INTEL_VGA_DEVICE since they have a
PCI_BASE_CLASS_DISPLAY class. This is not the case for CRI, so just
match on devid, which should be sufficient.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://lore.kernel.org/r/20251021-cri-v1-1-bf11e61d9f49@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Now that we support MEM_COPY we should be able to use the PAGE_COPY
mode, otherwise falling back to BYTE_COPY mode when we have odd
sizing/alignment.
v2:
- Use info.has_mem_copy_instr
- Rebase on latest changes.
v3 (Matt Brost):
- Allow various pitches including 1byte pitch for MEM_COPY
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251022163836.191405-8-matthew.auld@intel.com
Make this the default on xe2+ when doing a copy. This has a few
advantages over the exiting copy instruction:
1) It has a special PAGE_COPY mode that claims to be optimised for
page-in/page-out, which is the vast majority of current users.
2) It also has a simple BYTE_COPY mode that supports byte granularity
copying without any restrictions.
With 2) we can now easily skip the bounce buffer flow when copying
buffers with strange sizing/alignment, like for memory_access. But that
is left for the next patch.
v2 (Matt Brost):
- Use device info to check whether device should use the MEM_COPY
path. This should fit better with making this a configfs tunable.
- And with that also keep old path still functional on xe2 for possible
experimentation.
- Add a define for PAGE_COPY page-size.
v3 (Matt Brost):
- Fallback to an actual linear copy for pitch=1.
- Also update NVL.
BSpec: 57561
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251022163836.191405-7-matthew.auld@intel.com
We have an extra two dwords, but it looks like we should only need one
for the extra bb_end. Likely this is just leftover from back when the
arb handling was moved into the ring programming.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251022163836.191405-6-matthew.auld@intel.com
In xe_migrate_vram() the copy can straddle page boundaries, so the len
might look like a single page, but actually accounting for the offset
within the page we will need to emit more than one PTE. Otherwise in
some cases the batch buffer will be undersized leading to warnings
later. We already have npages so use that instead.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251022163836.191405-5-matthew.auld@intel.com
On systems with PAGE_SIZE > 4K the chunk will likely be rounded down to
zero, if say we have single 2M page, so one huge pte, since we also try
to align the chunk to PAGE_SIZE / XE_PAGE_SIZE, which will be 16 on 64K
systems. Make the ALIGN_DOWN conditional for 4K PTEs where we can
encounter gpu_page_size < PAGE_SIZE.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251022163836.191405-4-matthew.auld@intel.com
We allow the input size to not be aligned to PAGE_SIZE, which leads to
various bugs in build_pt_update_batch_sram() for PAGE_SIZE > 4K systems.
For example if ptes is exactly one gpu_page_size then the chunk size is
rounded down to zero. The simplest fix looks to be forcing PAGE_SIZE
aligned inputs.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251022163836.191405-3-matthew.auld@intel.com
Restriction here is pitch of 4bytes to match pixel width (32b), and hw
restriction where src and dst must be aligned to 64bytes. If any of that
is not possible then we need a bounce buffer.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251022163836.191405-2-matthew.auld@intel.com
An error code was assigned to a variable and checked accordingly.
This value was passed to a dev_err_probe() call in an if branch.
This function is documented in the way that the same value is returned.
Thus delete two redundant variable reassignments.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/71f7daa3-d4f4-4753-aae8-67040fc8297d@web.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xe_device.h and xe_device_has_flat_ccs() are no longer needed since
commit 3a5c5c472c ("drm/i915/display: add HAS_AUX_CCS() feature
check").
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251022121450.452649-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We've stopped using struct drm_i915_private in intel_fb.c and
skl_universal_plane.c, so we can drop the i915_drv.h includes.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20251022121450.452649-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Retrieve the CRTC's new state with drm_atomic_get_new_crtc_state()
in drm_sysfb_plane_helper_begin_fb_access(). The blit function might
be incorrect otherwise.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: cb71de0925 ("drm/sysfb: Lookup blit function during atomic check")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://lore.kernel.org/dri-devel/aPJrs7_u8KcalNsC@intel.com/
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251020125227.41308-1-tzimmermann@suse.de
* Make set debounce errors non-fatal in GPIO ACPI case
* Use human readable error when printing a message in GPIO ACPI code
-----BEGIN PGP SIGNATURE-----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=Rqon
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio fixes for v6.18-1
* Make set debounce errors non-fatal in GPIO ACPI case
* Use human readable error when printing a message in GPIO ACPI code
Switch to the generic PCI power management framework and remove legacy
callbacks like .suspend() and .resume(). With the generic framework, the
standard PCI related work like:
- pci_save/restore_state()
- pci_enable/disable_device()
- pci_set_power_state()
is handled by the PCI core and this driver should implement only gpio-bt8xx
specific operations in its respective callback functions.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20251016163618.1355923-1-vaibhavgupta40@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit a808a2b35f ("tools build: Fix fixdep dependencies") broke the
perf build ("make -C tools/perf") by introducing two inadvertent
conflicts:
1) tools/build/Makefile includes tools/build/Makefile.include, which
defines a phony 'fixdep' target. This conflicts with the $(FIXDEP)
file target in tools/build/Makefile when OUTPUT is empty, causing
make to report duplicate recipes for the same target.
2) The FIXDEP variable in tools/build/Makefile conflicts with the
previously existing one in tools/perf/Makefile.perf.
Remove the unnecessary include of tools/build/Makefile.include from
tools/build/Makefile, and rename the FIXDEP variable in
tools/perf/Makefile.perf to FIXDEP_BUILT.
Fixes: a808a2b35f ("tools build: Fix fixdep dependencies")
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://patch.msgid.link/8881bc3321bd9fa58802e4f36286eefe3667806b.1760992391.git.jpoimboe@kernel.org
Make cifs #include cifsglob.h in advance of #including trace.h so that the
structures defined in cifsglob.h can be accessed directly by the cifs
tracepoints rather than the callers having to manually pass in the bits and
pieces.
This should allow the tracepoints to be made more efficient to use as well
as easier to read in the code.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
As the SMB1 and SMB2/3 calc_signature functions are called from separate
sign and verify paths, just call them directly rather than using a function
pointer. The SMB3 calc_signature then jumps to the SMB2 variant if
necessary.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
There is no need to force a lookup by unhashing the moved dentry after
successfully renaming the file on server. The file metadata will be
re-fetched from server, if necessary, in the next call to
->d_revalidate() anyways.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The DMA device pointer `dma_dev` was being dereferenced before ensuring
that `cdns_ctrl->dmac` is properly initialized.
Move the assignment of `dma_dev` after successfully acquiring the DMA
channel to ensure the pointer is valid before use.
Fixes: d76d22b509 ("mtd: rawnand: cadence: use dma_map_resource for sdma address")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
One of the coccinelle recipe suggests to use %pe when we deal with
an error pointer. Do it so.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202510231350.calxvXIm-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support to use OPP table from DT in Tegra186 cpufreq driver.
Tegra SoC's receive the frequency lookup table (LUT) from BPMP-FW.
Cross check the OPP's present in DT against the LUT from BPMP-FW
and enable only those DT OPP's which are present in LUT also.
The OPP table in DT has CPU Frequency to bandwidth mapping where
the bandwidth value is per MC channel. DRAM bandwidth depends on the
number of MC channels which can vary as per the boot configuration.
This per channel bandwidth from OPP table will be later converted by
MC driver to final bandwidth value by multiplying with number of
channels before being handled in the EMC driver.
If OPP table is not present in DT, then use the LUT from BPMP-FW
directly as the CPU frequency table and not do the DRAM frequency
scaling which is same as the current behavior.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
[ Viresh: Fix _free() definitions ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add the compatible strings for supporting the generic
cpufreq driver on the StarFive JH7110S SoC.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
