Commit graph

361,021 commits

Author SHA1 Message Date
Rik van Riel
0f9a921cf9 x86: mm: only do a local tlb flush in ptep_set_access_flags()
The function ptep_set_access_flags() is only ever invoked to set access
flags or add write permission on a PTE.  The write bit is only ever set
together with the dirty bit.

Because we only ever upgrade a PTE, it is safe to skip flushing entries on
remote TLBs. The worst that can happen is a spurious page fault on other
CPUs, which would flush that TLB entry.

Lazily letting another CPU incur a spurious page fault occasionally is
(much!) cheaper than aggressively flushing everybody else's TLB.

Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
2012-12-11 14:28:33 +00:00
Trond Myklebust
7ce0171d4f Merge branch 'bugfixes' into nfs-for-next 2012-12-11 09:16:26 -05:00
Jeff Layton
81d9bce530 nfs: don't extend writes to cover entire page if pagecache is invalid
Jian reported that the following sequence would leave "testfile" with
corrupt data:

    # mount localhost:/export /mnt/nfs/ -o vers=3
    # echo abc > /mnt/nfs/testfile; echo def >> /export/testfile; echo ghi >> /mnt/nfs/testfile
    # cat -v /export/testfile
    abc
    ^@^@^@^@ghi

While there's no locking involved here, the operations are serialized,
so CTO should prevent corruption.

The first write to the file is fine and writes 4 bytes. The file is then
extended on the server. When it's reopened a GETATTR is issued and the
size change is noticed. This causes NFS_INO_INVALID_DATA to be set on
the file. Because the file is opened for write only,
nfs_want_read_modify_write() returns 0 to nfs_write_begin().
nfs_updatepage then calls nfs_write_pageuptodate() to see if it should
extend the nfs_page to cover the whole page. NFS_INO_INVALID_DATA is
still set on the file at that point, but that flag is ignored and
nfs_pageuptodate erroneously extends the write to cover the whole page,
with the write done on the server side filled in with zeroes.

This patch just has that function check for NFS_INO_INVALID_DATA in
addition to NFS_INO_REVAL_PAGECACHE. This fixes the bug, but looking
over the code, I wonder if we might have a similar bug in
nfs_revalidate_size(). The difference between those two flags is very
subtle, so it seems like we ought to be checking for
NFS_INO_INVALID_DATA in most of the places that we look for
NFS_INO_REVAL_PAGECACHE.

I believe this is regression introduced by commit 8d197a568. The code
did check for NFS_INO_INVALID_DATA prior to that patch.

Original bug report is here:

    https://bugzilla.redhat.com/show_bug.cgi?id=885743

Cc: <stable@vger.kernel.org> # 3.5+
Reported-by: Jian Li <jiali@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-11 09:14:51 -05:00
Sven Wegener
7d3e91a89b NFSv4: Check for buffer length in __nfs4_get_acl_uncached
Commit 1f1ea6c "NFSv4: Fix buffer overflow checking in
__nfs4_get_acl_uncached" accidently dropped the checking for too small
result buffer length.

If someone uses getxattr on "system.nfs4_acl" on an NFSv4 mount
supporting ACLs, the ACL has not been cached and the buffer suplied is
too short, we still copy the complete ACL, resulting in kernel and user
space memory corruption.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-12-11 09:14:50 -05:00
Catalin Marinas
d19766ec52 arm64: Update the MAINTAINERS entry
Add a backup maintainer and include Documentation/arm64/.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2012-12-11 13:58:05 +00:00
Jan Glauber
6726a807c3 s390/qdio: rename the misleading PCI flag of qdio devices
For each detected qdio device a line like to following is printed:
qdio: 0.0.4102 OSA on SC 1045 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AP

The PCI flag is misleading as this stands for "program controlled interrupt".
Rename it to PRI "program requested interrupt" which is more accurate and
does not interfere with another popular piece of technology.

Leave the pci string in the code since changing that would result in a huge
patch.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-11 14:52:49 +01:00
Jan Glauber
bedef75506 s390/pci: remove obsolete email addresses
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-11 14:52:45 +01:00
Jan Glauber
87bc359b98 s390/pci: speed up __iowrite64_copy by using pci store block insn
Benefit from pci store block instruction by writing up to 128 bytes
with a single instruction to MMIO space. Depending on the workload
this can result in a huge performance increase due to the reduced
number of instructions. The ordering guarantees of single stores
vs. one store block are identical.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-12-11 14:52:42 +01:00
Mauro Carvalho Chehab
77c53d0b56 Merge branch 'for_3.8-rc1' into v4l_for_linus
* for_3.8-rc1: (243 commits)
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] omap3isp: Prepare/unprepare clocks before/after enable/disable
  [media] omap3isp: preview: Add support for 8-bit formats at the sink pad
  [media] omap3isp: Replace printk with dev_*
  [media] omap3isp: Find source pad from external entity
  [media] omap3isp: Configure CSI-2 phy based on platform data
  [media] omap3isp: Add PHY routing configuration
  [media] omap3isp: Add CSI configuration registers from control block to ISP resources
  [media] omap3isp: Remove unneeded module memory address definitions
  [media] omap3isp: Use monotonic timestamps for statistics buffers
  [media] uvcvideo: Fix control value clamping for unsigned integer controls
  [media] uvcvideo: Mark first output terminal as default video node
  [media] uvcvideo: Add VIDIOC_[GS]_PRIORITY support
  [media] uvcvideo: Return -ENOTTY for unsupported ioctls
  [media] uvcvideo: Set device_caps in VIDIOC_QUERYCAP
  [media] uvcvideo: Don't fail when an unsupported format is requested
  [media] uvcvideo: Return -EACCES when trying to access a read/write-only control
  [media] uvcvideo: Set error_idx properly for extended controls API failures
  [media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2
  [media] fc2580: write some registers conditionally
  ...
2012-12-11 11:28:37 -02:00
Joonsoo Kim
923e02ecf3 scripts/tags.sh: Support compiled source
We usually have interst in compiled files only,
because they are strongly related to individual's work.
Current tags.sh can't select compiled files, so support it.

We can use this functionality like below.
"make cscope O=. SRCARCH=xxxx COMPILED_SOURCE=compiled"

It must be executed after building the kernel.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-12-11 14:25:42 +01:00
Joonsoo Kim
596585090a scripts/tags.sh: Support subarch for ARM
Current tags.sh doesn't handle subarch for ARM.
There are too many subarch on ARM, it is hard that we locate some
functions which are defined in every subarch with tags util family.
Therefore support subarch for removing this unconvenience.

We can use ARM subarch functionality like below.
"make cscope O=. SRCARCH=arm SUBARCH=xxx"

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-12-11 14:24:35 +01:00
Mauro Carvalho Chehab
9374020a78 Linux 3.7
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJQxqj1AAoJEHm+PkMAQRiG9MQH/j21UwP2QGpdpXbWAnFMjtlv
 uE/yCFhPoqR1QjjE6oRlO6MHFA41xGDbr5RQki9Ik2AfSYiastt4ZWYvtSJKVTCr
 O0Lj+Cdt/2qBkGiARHqVEBZ4S/l/cw4/EHPb5StFyu3ggnPPQhoPIP7oAmRn0+mh
 NNb5CEcJOLqIaJSteqMP71Q899ncbLayBnimYCaC2f6r00beqNXIqxSHipcPlUsf
 ehNxqCX+5z5Q788EL33EL8GpBcy4Ueevu6nvnuVI8qIEnBnrBVngsiaQ4Hti+2eK
 A//4DYoF2N1wLjQv7hFeiwMURQ16OlxXoc/Z66sv2QQRwPxOIQlxdhWuey4KebA=
 =7LYr
 -----END PGP SIGNATURE-----

Merge tag 'v3.7' into v4l_for_linus

Linux 3.7

* tag 'v3.7': (1545 commits)
  Linux 3.7
  Input: matrix-keymap - provide proper module license
  Revert "revert "Revert "mm: remove __GFP_NO_KSWAPD""" and associated damage
  ipv4: ip_check_defrag must not modify skb before unsharing
  Revert "mm: avoid waking kswapd for THP allocations when compaction is deferred or contended"
  inet_diag: validate port comparison byte code to prevent unsafe reads
  inet_diag: avoid unsafe and nonsensical prefix matches in inet_diag_bc_run()
  inet_diag: validate byte code to prevent oops in inet_diag_bc_run()
  inet_diag: fix oops for IPv4 AF_INET6 TCP SYN-RECV state
  mm: vmscan: fix inappropriate zone congestion clearing
  vfs: fix O_DIRECT read past end of block device
  net: gro: fix possible panic in skb_gro_receive()
  tcp: bug fix Fast Open client retransmission
  tmpfs: fix shared mempolicy leak
  mm: vmscan: do not keep kswapd looping forever due to individual uncompactable zones
  mm: compaction: validate pfn range passed to isolate_freepages_block
  mmc: sh-mmcif: avoid oops on spurious interrupts (second try)
  Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts"
  mmc: sdhci-s3c: fix missing clock for gpio card-detect
  lib/Makefile: Fix oid_registry build dependency
  ...
2012-12-11 11:18:45 -02:00
Mika Kuoppala
9e8e36879f drm/i915: Set initial seqno value close to wrap boundary
To gain confidence in the wrap handling, make it happen quite
soon after the boot.

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 14:07:22 +01:00
Chris Wilson
107f27a5df drm/i915: Open-code i915_gpu_idle() for handling seqno wrapping
The complication is that during seqno wrapping we must be extremely
careful not to write to any ring as that will require a new seqno, and
so would recurse back into the seqno wrap handler. So we cannot call
i915_gpu_idle() as that does additional work beyond simply retiring the
current set of requests, and instead must do the minimal work ourselves
during seqno wrapping.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 14:07:03 +01:00
Mark Brown
4ffc45c360 Merge remote-tracking branch 'regulator/topic/sm8767' into regulator-next 2012-12-11 21:44:55 +09:00
Mark Brown
f3cd19c38c Merge remote-tracking branch 'regulator/topic/change' into regulator-next 2012-12-11 21:44:53 +09:00
Axel Lin
8a23b4e03d regulator: core: Fix logic to determinate if regulator can change voltage
Having a linear_min_sel setting means the first linear_min_sel selectors are
invalid. We need to subtract linear_min_sel when use n_voltages to determinate
if regulator can change voltage.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11 21:44:23 +09:00
Mark Brown
b17fc86cc5 Merge branch 'topic/min' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-change 2012-12-11 21:44:17 +09:00
Mika Kuoppala
f72b3435c1 drm/i915: Don't emit semaphore wait if wrap happened
If wrap just happened we need to prevent emitting waits for
pre wrap values. Detect this and emit no-ops instead.

v2: Use olr > seqno to detect wrap instead of *seqno == 0
as suggested by Chris Wilson.

v3: Use last used seqno to detect the wraparound. From
Chris Wilson

v4: Fixed unnecessary last_seqno assigment

References: https://bugs.freedesktop.org/show_bug.cgi?id=57967
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 13:32:26 +01:00
Takashi Iwai
335c07b798 drm/i915: Fix shifted screen on top of LVDS on IVY laptop
The commit [23670b322: drm/i915: CPT+ pch transcoder workaround]
caused a regression on some HP laptops with IvyBridge.  The whole
laptop screen is shifted downward for a few pixels constantly.
The problem appears only on LVDS while DP and VGA seem unaffected.
Also, the problem disappears once when go and back from S3.
(S4 resume still shows the same problem.)

This patch revives the minimum part the commit above dropped.
For fixing this regression, only the setup of CHICKEN2 bit in
cpt_init_clock_gating() is needed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 12:53:50 +01:00
Thomas Gleixner
e716efde75 genirq: Avoid deadlock in spurious handling
commit 52553ddf(genirq: fix regression in irqfixup, irqpoll)
introduced a potential deadlock by calling the action handler with the
irq descriptor lock held.

Remove the call and let the handling code run even for an interrupt
where only a single action is registered. That matches the goal of
the above commit and avoids the deadlock.

Document the confusing action = desc->action reload in the handling
loop while at it.

Reported-and-tested-by: "Wang, Warner" <warner.wang@hp.com>
Tested-by: Edward Donovan <edward.donovan@numble.net>
Cc: "Wang, Song-Bo (Stoney)" <song-bo.wang@hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-12-11 12:25:30 +01:00
Ido Yariv
2e07d02828 wlcore: Always pass DMA-able buffers to mmc functions
Some of the mmc drivers initiate DMA transfers with buffers passed from
higher layers. This means that the driver shouldn't ever pass non
DMA-able buffers, such as ones that are unaligned, allocated on the
stack or static.

Fix a couple of calls to the mmc layer in which buffers which weren't
necessarily DMA-able were passed.

[Use sizeof(*wl->buffer_32) instead of sizeof(u32) -- Luca]

Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:37:24 +02:00
Arik Nemtsov
2fd8a3bb49 wl18xx: count HW block spare based correctly on keys
We have no idea how many VIFs there are requiring a special spare, we
know just about the number of keys set. Rename the counter appropriately
and toggle it whenever a special key is added/removed.
Previously this was only changed once, since it was toggled whenever
the actual spare was changed.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:37:24 +02:00
Eyal Shapira
0b70078c38 wlcore: support scan reports during periodic scan
FW API changed and now PERIODIC_SCAN_REPORT_EVENT is sent
in case results were found at the end of each sched scan
cycle. Previous FW was missing that and broke sched scan.

This API change is available from 18xx FW 8.5.0.0.27

[Arik - move changes to 18xx specific files, align FW structures to
latest for scan command]

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:37:23 +02:00
Arik Nemtsov
c80daad625 wl18xx: support MIMO only if HT mode is not forced to SISO
Don't use MIMO rates when HT mode is forced to SISO, even if we have
multiple antennas.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:37:23 +02:00
Arik Nemtsov
9ae5d8d4b7 wlcore: consolidate Rx BA bitmap management to links struct
Remove the STA specific ba_rx_bitmap field and use the common links
structure. This simplifies code setting/checking the BA bitmap.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:37:23 +02:00
Arik Nemtsov
d6037d22f3 wlcore: don't take mutex before stopping queues
Protect all functions touching queue_stop_reasons by spin-lock, since
they are accessed by op_tx. Now there's no need to take the mutex
before caling wlcore_queue_xxx functions.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:37:22 +02:00
Arik Nemtsov
1c33db782d wlcore: use separate HW queue for each AC in each vif
Start using the new hw_queue mechanism in mac80211 and give each AC in
each vif its own hw_queue number. This allows us to stop an AC in a vif
independently from other vifs.

Change the Tx watermark handling functions to count packets per AC in
vif. From now on fast links should not be able to hurt the throughput
of slow links on the same AC but on different vifs.

Change internal queue mgmt functions to operate per vif, to support the
new Tx watermark granularity. Make the global versions of the queue
stop/start functions to use the global mac80211 API for queue mgmt. This
helps in situations where the driver currently doesn't know all the vifs
that reside in mac80211. Recovery is a good example for such a case.

[Moved hw_base_queue addition into the wlcore_tx_get_mac80211_queue()
function; changed WARN_ONs to WARN_ON_ONCEs; simplified for loops;
fixed new checkpatch warnings. -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:37:13 +02:00
Arik Nemtsov
9a1009684d wlcore: use link count for single-STA-PSM optimization
Only allow a PSM STA to congest FW memory when it is the single active
link. Being a single STA doesn't imply a single link - there might be
other links on other roles.

[Changed WARN_ON to WARN_ON_ONCE -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:25:37 +02:00
Arik Nemtsov
98323895c0 wl18xx: limit Tx for the AP single-STA-in-PSM case
Treat a single connected STA in PSM as a slow link and regulate Tx speed
according to slow link priority/stop thresholds.
This allows us to avoid flooding the FW, while delivering decent
throughput to a peer in forced-PSM.

[Small simplification of the if statements -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:25:36 +02:00
Arik Nemtsov
f1626fd898 wlcore/wl18xx: change priority calculations for links
Update the 18xx FW status private part to include Tx related link
priorities. Introduce new HW ops to determine link priority per chip
family.

For 18xx the changes are:
- Suspended links are at most low priority and Tx for them is stopped
  beyond the suspend threshold.
- Active links now get their thresholds directly from FW
- There's a new "stop" threshold for active links, at which point a link
  stops receiving new packets.

Update the min 18xx FW version required to make sure suspended links
bitmap is advertised by the FW.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-12-11 12:25:18 +02:00
Christoph Lameter
4590685546 mm/sl[aou]b: Common alignment code
Extract the code to do object alignment from the allocators.
Do the alignment calculations in slab_common so that the
__kmem_cache_create functions of the allocators do not have
to deal with alignment.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-12-11 12:14:28 +02:00
Christoph Lameter
2f9baa9fcf slab: Use the new create_boot_cache function to simplify bootstrap
Simplify setup and reduce code in kmem_cache_init(). This allows us to
get rid of initarray_cache as well as the manual setup code for
the kmem_cache and kmem_cache_node arrays during bootstrap.

We introduce a new bootstrap state "PARTIAL" for slab that signals the
creation of a kmem_cache boot cache.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-12-11 12:14:27 +02:00
Christoph Lameter
dffb4d605c slub: Use statically allocated kmem_cache boot structure for bootstrap
Simplify bootstrap by statically allocated two kmem_cache structures. These are
freed after bootup is complete. Allows us to no longer worry about calculations
of sizes of kmem_cache structures during bootstrap.

Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-12-11 12:14:27 +02:00
Christoph Lameter
45530c4474 mm, sl[au]b: create common functions for boot slab creation
Use a special function to create kmalloc caches and use that function in
SLAB and SLUB.

Acked-by: Joonsoo Kim <js1304@gmail.com>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-12-11 12:14:27 +02:00
Christoph Lameter
3c58346525 slab: Simplify bootstrap
The nodelists field in kmem_cache is pointing to the first unused
object in the array field when bootstrap is complete.

A problem with the current approach is that the statically sized
kmem_cache structure use on boot can only contain NR_CPUS entries.
If the number of nodes plus the number of cpus is greater then we
would overwrite memory following the kmem_cache_boot definition.

Increase the size of the array field to ensure that also the node
pointers fit into the array field.

Once we do that we no longer need the kmem_cache_nodelists
array and we can then also use that structure elsewhere.

Acked-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-12-11 12:14:27 +02:00
Christoph Lameter
59a09917c9 slub: Use correct cpu_slab on dead cpu
Pass a kmem_cache_cpu pointer into unfreeze partials so that a different
kmem_cache_cpu structure than the local one can be specified.

Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2012-12-11 12:14:27 +02:00
Russell King
0fa5d3996d Merge branch 'devel-stable' into for-linus 2012-12-11 10:01:53 +00:00
Ingo Molnar
c1ad41f1f7 Revert "sched/autogroup: Fix crash on reboot when autogroup is disabled"
This reverts commit 5258f386ea,
because the underlying autogroups bug got fixed upstream in
a better way, via:

  fd8ef11730 Revert "sched, autogroup: Stop going ahead if autogroup is disabled"

Cc: Mike Galbraith <efault@gmx.de>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-11 10:23:45 +01:00
Lee Jones
215cf5c93d ab8500_bm: Make the battery Device Tree node reference less cryptic
Let's rename the Device Tree node which contains information about
an attached battery to something more easily readable.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:55 +00:00
Lee Jones
bdc56b4403 abx500_chargalg: Reorder obtainment of platform specific battery management data
Now that we always pass platform specific battery management data
through platform_data instead of obtaining it via different means
depending the way be boot the system (DT or ATAGs); we need to
re-jiggle the way we acquire it in the driver start-up functions.
Now it is wrong for it to be missing, but we still allow Device
Tree code to fiddle with it once we've confirmed it's there.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:55 +00:00
Lee Jones
195c1c660c ab8500_fg: Reorder obtainment of platform specific battery management data
Now that we always pass platform specific battery management data
through platform_data instead of obtaining it via different means
depending the way be boot the system (DT or ATAGs); we need to
re-jiggle the way we acquire it in the driver start-up functions.
Now it is wrong for it to be missing, but we still allow Device
Tree code to fiddle with it once we've confirmed it's there.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:55 +00:00
Lee Jones
7722b79964 ab8500_charger: Reorder obtainment of platform specific battery management data
Now that we always pass platform specific battery management data
through platform_data instead of obtaining it via different means
depending the way be boot the system (DT or ATAGs); we need to
re-jiggle the way we acquire it in the driver start-up functions.
Now it is wrong for it to be missing, but we still allow Device
Tree code to fiddle with it once we've confirmed it's there.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:54 +00:00
Lee Jones
95820245ed ab8500_btemp: Reorder obtainment of platform specific battery management data
Now that we always pass platform specific battery management data
through platform_data instead of obtaining it via different means
depending the way be boot the system (DT or ATAGs); we need to
re-jiggle the way we acquire it in the driver start-up functions.
Now it is wrong for it to be missing, but we still allow Device
Tree code to fiddle with it once we've confirmed it's there.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:54 +00:00
Lee Jones
23a04f9f40 ab8500_bm: Always send platform specific battery information via pdata
Currently the AB8500 battery management subsystem receives platform
specific information via two different means depending on how the
platform is booted. If DT is not enabled, a reference to a *_bm_data
data structure containing each platform specific attribute is passed
though platform_data. However, if DT is enabled, then platform_data
is empty and the reference is gained though a DT specific probe
function. There are two issues here 1) the same reference is
being collected each time and 2) the DT way doesn't allow any
provisions to select different platform specific attributes, which
kind of defeats the object.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:54 +00:00
Lee Jones
b0284de05e ab8500_bm: Rename battery management platform data to something more logical
The platform specific battery management configuration data structure
is currently called 'bat' short for 'battery'; however, it contains
information for all components of the battery management group, rather
than information pertaining to the battery itself - there are other
structures for that. So, in keeping with its structure namesake
'abx500_bm_data', we rename it to 'bm' here. Using similar logic,
we're also renaming 'bmdevs_of_probe' to the more device specific
'ab8500_bm_of_probe'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:53 +00:00
Lee Jones
8e3a71e56c ab8500-bmdata: Re-jiggle bmdevs_of_probe to be more succinct
We can actually write bmdevs_of_probe to be easier to follow, use
less lines of code and we can even render a variable unused so
that we can remove it completely.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:53 +00:00
Lee Jones
43dc4470e3 ab8500_btemp: Fix crazy tabbing implementation
Simple patch to rectify incorrect tabbing. Also adds some
coding style clean-ups to make it easier to read.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:52 +00:00
Jonas Aaberg
f6271b4fb1 ab8500_btemp: Detect battery type in workqueue
Detect battery type in work queue instead of probe.

This reduces the system boot time with 1.5s.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com>
2012-12-11 08:43:52 +00:00
Kalle Komierowski
e32ad07cea ab8500_fg: Don't clear the CCMuxOffset bit
The CCMuxOffset bit is not kept set. This will force the
columb counter of the AB8500 to use the measure offset
calibration. This should increase the accuracy of the fuel
gauge.

Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-12-11 08:43:52 +00:00