Commit graph

361,021 commits

Author SHA1 Message Date
Takashi Iwai
4f86f120d9 ALSA: emu10k1: don't update firmware during suspend/resume
Add a flag to suppress the update in emu1010_firmware_thread() during
suspend/resume.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:48:11 +01:00
Takashi Iwai
b209c4dfcd ALSA: emu10k1: cache emu1010 firmware
Instead of calling request_firmware() at each time, keep the obtained
firmware internally and reuse it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:48:09 +01:00
Takashi Iwai
90caaef6a1 ALSA: hdsp: improve firmware caching
As the recent firmware code tries to reread and cache the firmware by
itself, it's even better to keep the struct firmware data instead of
keeping a local copy.  Also, it makes little sense to disable the fw
loader for this driver, so added the explicit dependency, too.

Last, but not least, allocate the firmware data loaded via ioctl in
vmalloc'ed buffer instead, as the firmware size isn't that small.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:48:07 +01:00
Takashi Iwai
7009fa568b ALSA: ymfpci: Use kmalloc for register buffer for PM
Th buffer to save registers for PM is enough small for kmalloc(), not
necessary to use vmalloc().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:48:05 +01:00
Takashi Iwai
e39ae85644 ALSA: hda - Don't release firmware when CONFIG_PM is set
The new firmware code tries to re-read the formerly read firmware
files before suspend.  Thus it's wiser to keep the "patch" firmware in
the driver for avoiding this unnecessary re-reading.

Of course, this will consume a bit of memory for unused stuff, but
the patch fw is supposed to be fairly small, so it's more benefit in
the end.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:48:03 +01:00
Takashi Iwai
0d144de9af ALSA: vx: hard dependency on the standard fw loader
Yet again like previous two commits, drop the old hwdep user-space
firmware code from vx driver (snd-vxpocket and snd-vx222).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:48:01 +01:00
Takashi Iwai
d19144987c ALSA: pcxhr: hard dependency on the standard fw loader
Like the previous commit for mixart, drop the home-baked fw loader
code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:47:59 +01:00
Takashi Iwai
cba46f11cb ALSA: mixart: hard dependency on the standard fw loader
It makes no longer sense to keep the old hwdep user-space firmware
loading, which has been deprecated since ages ago.

Just add a hard dependency on CONFIG_FW_LOADER and drop the useless
code.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:47:57 +01:00
Takashi Iwai
3fdf1469ee ALSA: hda - Don't overwrite the pin default configs
Since we keep the pin default config values anyway internally, we
don't have to set the values in the codec.  This patch removes the
code writing the pincfg values.

As a gratis bonus, we can remove also the code restoring the original
pincfg values at PM resume or module free.  This will give us more
benefit, as it can reduce the unnecessary power-up of codecs.

This won't change the driver functionality.  The only difference would
be that the codec proc file will show the original pincfg values
instead of the actually referred values.  The actually referred values
can be determined from sysfs *_pin_configs files.
(Also hda-emu was updated to follow this change.)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22 17:45:45 +01:00
Peter Senna Tschudin
304a0807a2 [media] drivers/media/usb/hdpvr/hdpvr-core.c: fix error return code
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 14:22:31 -02:00
Peter Senna Tschudin
97b55f6a46 [media] drivers/media/usb/tm6000/tm6000-video.c: fix error return code
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 14:20:40 -02:00
Peter Senna Tschudin
8ca7080443 [media] drivers/media/radio/radio-cadet.c: fix error return code
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 14:20:34 -02:00
Peter Senna Tschudin
95d0812624 [media] drivers/media/pci/dm1105/dm1105.c: fix error return code
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 14:20:28 -02:00
Peter Senna Tschudin
bd6973ea6e [media] drivers/media/pci/ngene/ngene-core.c: fix error return code
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 14:20:25 -02:00
Peter Senna Tschudin
216f393851 [media] drivers/media/pci/cx25821/cx25821-video-upstream.c: fix error return code
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 14:20:22 -02:00
Peter Senna Tschudin
bc7c85e501 [media] drivers/media/pci/ttpci/budget-av.c: fix error return code
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 13:41:31 -02:00
Tejun Heo
811d8d6ff5 netprio_cgroup: allow nesting and inherit config on cgroup creation
Inherit netprio configuration from ->css_online(), allow nesting and
remove .broken_hierarchy marking.  This makes netprio_cgroup's
behavior match netcls_cgroup's.

Note that this patch changes userland-visible behavior.  Nesting is
allowed and the first level cgroups below the root cgroup behave
differently - they inherit priorities from the root cgroup on creation
instead of starting with 0.  This is unfortunate but not doing so is
much crazier.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-and-Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: David S. Miller <davem@davemloft.net>
2012-11-22 07:32:47 -08:00
Tejun Heo
666b0ebe2b netprio_cgroup: implement netprio[_set]_prio() helpers
Introduce two helpers - netprio_prio() and netprio_set_prio() - which
hide the details of priomap access and expansion.  This will help
implementing hierarchy support.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-and-Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: David S. Miller <davem@davemloft.net>
2012-11-22 07:32:47 -08:00
Tejun Heo
88d642fa2c netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx
With priomap expansion no longer depending on knowing max id
allocated, netprio_cgroup can use cgroup->id insted of cs->prioidx.
Drop prioidx alloc/free logic and convert all uses to cgroup->id.

* In cgrp_css_alloc(), parent->id test is moved above @cs allocation
  to simplify error path.

* In cgrp_css_free(), @cs assignment is made initialization.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-and-Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: David S. Miller <davem@davemloft.net>
2012-11-22 07:32:47 -08:00
Tejun Heo
4a6ee25c7e netprio_cgroup: reimplement priomap expansion
netprio kept track of the highest prioidx allocated and resized
priomaps accordingly when necessary.  This makes it necessary to keep
track of prioidx allocation and may end up resizing on every new
prioidx.

Update extend_netdev_table() such that it takes @target_idx which the
priomap should be able to accomodate.  If the priomap is large enough,
nothing happens; otherwise, the size is doubled until @target_idx can
be accomodated.

This makes max_prioidx and write_update_netdev_table() unnecessary.
write_priomap() now calls extend_netdev_table() directly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-and-Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: David S. Miller <davem@davemloft.net>
2012-11-22 07:32:46 -08:00
Tejun Heo
52bca930c9 netprio_cgroup: shorten variable names in extend_netdev_table()
The function is about to go through a rewrite.  In preparation,
shorten the variable names so that we don't repeat "priomap" so often.

This patch is cosmetic.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-and-Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: David S. Miller <davem@davemloft.net>
2012-11-22 07:32:46 -08:00
Tejun Heo
6d5759dd02 netprio_cgroup: simplify write_priomap()
sscanf() doesn't bite.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-and-Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: David S. Miller <davem@davemloft.net>
2012-11-22 07:32:46 -08:00
Tejun Heo
0ba18f7a5e netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking
It turns out that we'll have to live with attributes which are
inherited at cgroup creation time but not affected by further updates
to the parent afterwards - such attributes are already in wide use
e.g. for cpuset.

So, there's nothing to do for netcls_cgroup for hierarchy support.
Its current behavior - inherit only during creation - is good enough.

Move config inheriting from ->css_alloc() to ->css_online() for
consistency, which doesn't change behavior at all, and remove
.broken_hierarchy marking.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-and-Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: David S. Miller <davem@davemloft.net>
2012-11-22 07:32:46 -08:00
Aaro Koskinen
8ad9375f8b OMAPDSS: do not fail if dpll4_m4_ck is missing
Do not fail if dpll4_m4_ck is missing. The clock is not there on omap24xx,
so this should not be a hard error.

The patch retains the functionality before the commit 185bae10 (OMAPDSS:
DSS: Cleanup cpu_is_xxxx checks).

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-22 17:23:12 +02:00
Aaro Koskinen
ee6352de51 OMAPDSS: panel-n8x0: register the DSS driver after SPI probe
Register the DSS driver after SPI probe. This simplifies the
initialization. This is similar to what is being done e.g.
in panel-acx565akm.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-11-22 17:22:55 +02:00
Hans Verkuil
c4697d7f96 [media] vpif_display: protect dma_queue by a spin_lock
The dma_queue list is accessed by both the interrupt handler and by normal
code. It needs to be protected by a lock to prevent possible list corruption.
Corruption has been observed in 'real-life' conditions. Adding this lock made
it go away.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 12:36:53 -02:00
Hans Verkuil
aec968326d [media] vpif_capture: protect dma_queue by a spin_lock
The dma_queue list is accessed by both the interrupt handler and by normal
code. It needs to be protected by a lock to prevent possible list corruption.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 12:36:29 -02:00
Sascha Hauer
2b254693be ARM i.MX6: remove gate_mask from pllv3
Now that the additional enable bits in the enet PLL are handled
as gates, the gate_mask is identical for all plls. Remove the
gate_mask from the code and use the BM_PLL_ENABLE bit for
enabling/disabling the PLL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 15:32:39 +01:00
Sascha Hauer
7a04092c73 ARM i.MX6: Fix ethernet PLL clocks
In current code the ethernet PLL is not handled correctly. The PLL runs at 500MHz
and has different outputs. Only the enet reference clock is implemented. This
patch changes the PLL so that it outputs 500MHz and adds the additional outputs
as dividers. This now matches the datasheet which says:

> This PLL synthesizes a low jitter clock from 24 MHz reference clock.
> The PLL outputs a 500 MHz clock. The reference clocks generated by this PLL are:
>  • Ref_PCIe = 125 MHz
>  • Ref_SATA = 100 MHz
>  • Ref_ethernet, which is configurable based on the PLL_ENET[1:0] register field.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 15:32:33 +01:00
Sascha Hauer
13861701a8 ARM i.MX6: rename PLLs according to datasheet
In recent reference manuals the PLLs were renumbered. PLL8 now is
PLL6 and vice versa. Change the code according to the reference
manual to avoid confusion.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-11-22 15:32:24 +01:00
Wei Yongjun
94b76a88f1 [media] davinci: vpif: fix return value check for vb2_dma_contig_init_ctx()
In case of error, the function vb2_dma_contig_init_ctx() returns
ERR_PTR() and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com>
[prabhakar.lad@ti.com: reword commit header]
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 12:23:26 -02:00
Wei Yongjun
63af4af592 [media] davinci: vpif_display: fix return type check for v4l2_subdev_call()
The v4l2_subdev_call() call returns -ENODEV when subdev is
null and -ENOIOCTLCMD wnen no icotl is present.
This patch fixes the return type check for v4l2_subdev_call().
The pattern E == C1 && E == C2 is always false. This patch
fix this according to the assumption that && should be ||.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[prabhakar.lad@ti.com: reword commit messaage]
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 12:20:13 -02:00
Wei Yongjun
e070f1b47e [media] davinci: vpif_capture: fix return type check for v4l2_subdev_call()
The v4l2_subdev_call() call returns -ENODEV when subdev is
null and -ENOIOCTLCMD wnen no icotl is present.
This patch fixes the return type check for v4l2_subdev_call().
The pattern E == C1 && E == C2 is always false. This patch
fix this according to the assumption that && should be ||.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
[prabhakar.lad@ti.com: reword commit message]
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 12:17:02 -02:00
Laurent Pinchart
864a121274 [media] v4l: Don't warn during link validation when encountering a V4L2 devnode
v4l2_subdev_link_validate_get_format() retrieves the remote pad format
depending on the entity type and prints a warning if the entity type is
not supported. The type check doesn't take the subtype into account, and
thus always prints a warning for device node types, even when supported.
Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 12:09:49 -02:00
Andrew Karpow
86163adb81 [media] rtl28xxu: 0ccd:00d7 TerraTec Cinergy T Stick+
added usb-id as driver supports the stick

Signed-off-by: Andrew Karpow <andy@mailbox.tu-berlin.de>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 12:04:53 -02:00
Antti Palosaari
08e5727416 [media] rtl28xxu: 1d19:1102 Dexatek DK mini DVB-T Dongle
Add new USB ID as driver supports it.

Reported-by: Hubert Lin <hubertwslin@gmail.com>
Tested-by: Hubert Lin <hubertwslin@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 12:04:35 -02:00
Anatolij Gustschin
b6f50b49b9 [media] mt9v022: set y_skip_top field to zero as default
Set "y_skip_top" to zero and revise comment as I do not see this line
corruption on two different mt9v022 setups. The first read-out line
is perfectly fine. Add mt9v022 platform data configuring y_skip_top
for platforms that have issues with the first read-out line. Set
y_skip_top to 1 for pcm990 board.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 11:36:50 -02:00
Anatolij Gustschin
d0bac768fb [media] mt9v022: support required register settings in snapshot mode
Some camera systems cannot operate mt9v022 in normal mode and use
only the snapshot mode. The TechNote for mt9v022 (TN0960) and mt9v024
(TN-09-225) describes required register settings when configuring the
snapshot operation. The snapshot mode requires that certain automatic
functions of the image sensor should be disabled or set to fixed values.
According to the TechNote bit 2 and bit 9 in the register 0x20 must be
set in snapshot mode and unset for normal operation. This applies for
mt9v022 Rev.3 and mt9v024. Add required reg. 0x20 settings dependent on
sensor chip version.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 11:36:15 -02:00
Anatolij Gustschin
6cc1eb7023 [media] mt9v022: add v4l2 controls for blanking
Add controls for horizontal and vertical blanking. Also add an error
message for case that the control handler init failed. Since setting
the blanking registers is done by controls now, we shouldn't change
these registers outside of the control function. Use v4l2_ctrl_s_ctrl()
to set them.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 11:35:45 -02:00
Frank Schäfer
d1a49eacd9 [media] ov2640: add support for V4L2_MBUS_FMT_YUYV8_2X8, V4L2_MBUS_FMT_RGB565_2X8_BE
This is the result of experimenting with the SpeedLink VAD Laplace webcam.
The register sequence for V4L2_MBUS_FMT_YUYV8_2X8 has been identified by
analyzing USB-logs of this device running on MS Windows.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 11:34:12 -02:00
Anatolij Gustschin
1438be56ad [media] V4L: soc_camera: allow reading from video device if supported
Try reading on video device. If the camera bus driver supports reading
we can try it and return the result. Also add a debug line.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 11:33:18 -02:00
Shawn Guo
0dc2d84961 [media] media: mx1_camera: mark the driver BROKEN
The mx1_camera driver has been broken for a few release cycles since
commit 6bd0812 (dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c).
It seems there is no one even compile tested it since then, as doing
so will end up with the following error.
  CC      drivers/media/platform/soc_camera/mx1_camera.o
In file included from drivers/media/platform/soc_camera/mx1_camera.c:44:0:
arch/arm/mach-imx/include/mach/dma-mx1-mx2.h:8:25: fatal error: mach/dma-v1.h: No such file or directory
It seems there is no one being interested in bringing it back to
work [1] so far.  Let's mark it BROKEN.
[1] https://lkml.org/lkml/2012/2/9/171

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 11:26:19 -02:00
Jani Nikula
4b745b1e54 drm/i915/sdvo: kfree the intel_sdvo_connector, not drm_connector, on destroy
Since the base fields in both struct intel_connector and struct
intel_sdvo_connector are at the beginning of the enclosing struct, the
pointers are essentially the same, but there is no requirement or guarantee
that this is always the case. Kfree the enclosing intel_sdvo_connector
pointer that was originally allocated, not the enclosed drm_connector, in
case someone ever rearranges the structs.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-22 14:10:19 +01:00
Anatolij Gustschin
9bb047cd1a [media] mt9v022: fix the V4L2_CID_EXPOSURE control
Since the MT9V022_TOTAL_SHUTTER_WIDTH register is controlled in manual
mode by V4L2_CID_EXPOSURE control, it shouldn't be written directly in
mt9v022_s_crop(). In manual mode this register should be set to the
V4L2_CID_EXPOSURE control value. Changing this register directly and
outside of the actual control function means that the register value
is not in sync with the corresponding control value. Thus, the following
problem is observed:
    - setting this control initially succeeds
    - VIDIOC_S_CROP ioctl() overwrites the MT9V022_TOTAL_SHUTTER_WIDTH
      register
    - setting this control to the same value again doesn't
      result in setting the register since the control value
      was previously cached and doesn't differ
Remove MT9V022_TOTAL_SHUTTER_WIDTH register setting in mt9v022_s_crop()
and add a comment explaining why it is not needed in manual mode.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 10:59:49 -02:00
Wei Yongjun
f1ccccaf23 [media] mx2_camera: fix missing unlock on error in mx2_start_streaming()
Add the missing unlock on the error handle path in function
mx2_start_streaming().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 10:58:27 -02:00
Ying Xue
389dd9bcf6 tipc: rename supported flag to recv_permitted
Rename the "supported" flag in bclink structure to "recv_permitted"
to better reflect what it is used for. When this flag is set for a
given node, we are permitted to receive and acknowledge broadcast
messages from that node.  Convert it to a bool at the same time,
since it is not used to store any numerical values.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-22 07:50:51 -05:00
Ying Xue
818f4da526 tipc: remove supportable flag from bclink structure
The "supportable" flag in bclink structure is a compatibility flag
indicating whether a peer node is capable of receiving TIPC broadcast
messages. However, all TIPC versions since tipc-1.5, and after the
inclusion in the upstream Linux kernel in 2006, support this capability.
It is highly unlikely that anybody is still using such an old
version of TIPC, let alone that they want to mix it with TIPC-2.0
nodes. Therefore, we now remove the "supportable" flag.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-11-22 07:50:50 -05:00
Guennadi Liakhovetski
6a3082adc8 [media] media: omap1_camera: fix const cropping related warnings
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced
warnings in omap1_camera. Fix them by adjusting a function declaration.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 10:45:59 -02:00
Guennadi Liakhovetski
5c11191334 [media] media: mx1_camera: use the default .set_crop() implementation
.set_crop() implementation in mx1_camera is identical with the default.
Remove the copy to switch to using the default stab.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 10:45:41 -02:00
Guennadi Liakhovetski
d63bb2790c [media] media: mx2_camera: fix const cropping related warnings
A recent commit "[media] v4l2: make vidioc_s_crop const" introduced
warnings in mx2_camera. Fix them by cleanly separating writable and
read-only variables in cropping operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 10:45:13 -02:00