Currently when sync read fails and badblocks set fails (exceeding
512 limit), rdev isn't immediately marked Faulty. Instead
'recovery_disabled' is set and non-In_sync rdevs are removed later.
This preserves array availability if bad regions aren't read, but bad
sectors might be read by users before rdev removal. This occurs due
to incorrect resync/recovery_offset updates that include these bad
sectors.
When badblocks exceed 512, keeping the disk provides little benefit
while adding complexity. Prompt disk replacement is more important.
Therefore when badblocks set fails, directly call md_error to mark rdev
Faulty immediately, preventing potential data access issues.
After this change, cleanup of offset update logic and 'recovery_disabled'
handling will follow.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-6-linan666@huaweicloud.com
Fixes: 5e5702898e ("md/raid10: Handle read errors during recovery better.")
Fixes: 3a9f28a511 ("md/raid1: improve handling of read failure during recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Mark device faulty and exit at once when setting badblocks fails in
narrow_write_error(). No need to continue processing remaining sections.
With this change, narrow_write_error() no longer needs to return a value,
so adjust its return type to void.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-5-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
When badblocks.shift < 0 (badblocks disabled), narrow_write_error()
return false, preventing write error handling. Since narrow_write_error()
only splits IO into smaller sizes and re-submits, it can work with
badblocks disabled.
Adjust to use the logical block size for block_sectors when badblocks is
disabled, allowing narrow_write_error() to function in this case.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-4-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
The 'ok' parameter in md_done_sync() is redundant for most callers that
always pass 'true'. Factor error handling logic into a separate helper
function md_sync_error() to eliminate unnecessary parameter passing and
improve code clarity.
No functional changes introduced.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-3-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
In end_sync_write, r1bio state is always set to either R1BIO_WriteError
or R1BIO_MadeGood. Consequently, put_sync_write_buf() never takes the
'else' branch that calls md_done_sync(), making the uptodate parameter
have no practical effect.
Pass 1 to put_sync_write_buf(). A more complete cleanup will be done in
a follow-up patch.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-2-linan666@huaweicloud.com
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Otherwise, even if user issue IO by io_opt, such IO will be split
by max_sectors before they are submitted to raid5. For consequence,
full stripe IO is impossible.
BTW, dm-raid5 is not affected and still have such problem.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-7-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
On the one hand, stripe_request_ctx is 72 bytes, and it's a bit huge for
a stack variable.
On the other hand, the bitmap sectors_to_do is a fixed size, result in
max_hw_sector_kb of raid5 array is at most 256 * 4k = 1Mb, and this will
make full stripe IO impossible for the array that chunk_size * data_disks
is bigger. Allocate ctx during runtime will make it possible to get rid
of this limit.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-6-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Since commit f63f17350e ("md/raid5: use the atomic queue limit
update APIs"), the abort path in raid5_run() returns 'ret' instead of
-EIO. However, if log_init() fails, 'ret' is still 0 from the previous
successful call, causing raid5_run() to return success despite the
failure.
Fix this by capturing the return value from log_init().
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-2-yukuai@fnnas.com
Fixes: f63f17350e ("md/raid5: use the atomic queue limit update APIs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601130531.LGfcZsa4-lkp@intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A new utility metadata_size was added in
commit 261b67f4e3 ("selftests: ublk: add utility to get block device metadata size")
but it was not added to .gitignore. Fix that by adding it there.
While at it sort all entries alphabetically and add a SPDX license header.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 261b67f4e3 ("selftests: ublk: add utility to get block device metadata size")
Signed-off-by: Alexander Atanasov <alex@zazolabs.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename the auto buffer registration functions for clarity:
- __ublk_do_auto_buf_reg() -> ublk_auto_buf_register()
- ublk_prep_auto_buf_reg_io() -> ublk_auto_buf_io_setup()
- ublk_do_auto_buf_reg() -> ublk_auto_buf_dispatch()
Add comments documenting the locking requirements for each function.
No functional change.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Two issues with ubq->canceling flag handling:
1) In ublk_queue_reset_io_flags(), ubq->canceling is set outside
cancel_lock, violating the locking requirement. Move it inside
the spinlock-protected section.
2) In ublk_batch_unprep_io(), when rolling back after a batch prep
failure, if the queue became ready during prep (which cleared
canceling), the flag is not restored when the queue becomes
not-ready again. This allows new requests to be queued to
uninitialized IO slots.
Fix by restoring ubq->canceling = true under cancel_lock when the
queue transitions from ready to not-ready during rollback.
Reported-by: Jens Axboe <axboe@kernel.dk>
Fixes: 3f38507855 ("ublk: fix batch I/O recovery -ENODEV error")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_batch_prep_io() calls __ublk_fetch() while holding io->lock
spinlock. When the last IO makes the device ready, ublk_mark_io_ready()
tries to acquire ub->cancel_mutex which can sleep, causing a
sleeping-while-atomic bug.
Fix by moving ublk_mark_io_ready() out of __ublk_fetch() and into the
callers (ublk_fetch and ublk_batch_prep_io) after the spinlock is
released.
Reported-by: Jens Axboe <axboe@kernel.dk>
Fixes: b256795b36 ("ublk: handle UBLK_U_IO_PREP_IO_CMDS")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable flexible thread-to-queue mapping in batch I/O mode to support
arbitrary combinations of threads and queues, improving resource
utilization and scalability.
Key improvements:
- Support N:M thread-to-queue mapping (previously limited to 1:1)
- Dynamic buffer allocation based on actual queue assignment per thread
- Thread-safe queue preparation with spinlock protection
- Intelligent buffer index calculation for multi-queue scenarios
- Enhanced validation for thread/queue combination constraints
Implementation details:
- Add q_thread_map matrix to track queue-to-thread assignments
- Dynamic allocation of commit and fetch buffers per thread
- Round-robin queue assignment algorithm for load balancing
- Per-queue spinlock to prevent race conditions during prep
- Updated buffer index calculation using queue position within thread
This enables efficient configurations like:
- Any other N:M combinations for optimal resource matching
Testing:
- Added test_batch_02.sh: 4 threads vs 1 queue
- Added test_batch_03.sh: 1 thread vs 4 queues
- Validates correctness across different mapping scenarios
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add --batch/-b for enabling F_BATCH_IO.
Add batch_01 for covering its basic function.
Add stress_08 and stress_09 for covering stress test.
Add recovery test for F_BATCH_IO in generic_04 and generic_05.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More tests need to be covered in existing generic tests, and default
45sec isn't enough, and timeout is often triggered, increase timeout
by adding setting file.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for UBLK_U_IO_FETCH_IO_CMDS to enable efficient batch
fetching of I/O commands using multishot io_uring operations.
Key improvements:
- Implement multishot UBLK_U_IO_FETCH_IO_CMDS for continuous command fetching
- Add fetch buffer management with page-aligned, mlocked buffers
- Process fetched I/O command tags from kernel-provided buffers
- Integrate fetch operations with existing batch I/O infrastructure
- Significantly reduce uring_cmd issuing overhead through batching
The implementation uses two fetch buffers per thread with automatic
requeuing to maintain continuous I/O command flow. Each fetch operation
retrieves multiple command tags in a single syscall, dramatically
improving performance compared to individual command fetching.
Technical details:
- Fetch buffers are page-aligned and mlocked for optimal performance
- Uses IORING_URING_CMD_MULTISHOT for continuous operation
- Automatic buffer management and requeuing on completion
- Enhanced CQE handling for fetch command completions
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement UBLK_U_IO_COMMIT_IO_CMDS to enable efficient batched
completion of I/O operations in the batch I/O framework.
This completes the batch I/O infrastructure by adding the commit
phase that notifies the kernel about completed I/O operations:
Key features:
- Batch multiple I/O completions into single UBLK_U_IO_COMMIT_IO_CMDS
- Dynamic commit buffer allocation and management per thread
- Automatic commit buffer preparation before processing events
- Commit buffer submission after processing completed I/Os
- Integration with existing completion workflows
Implementation details:
- ublk_batch_prep_commit() allocates and initializes commit buffers
- ublk_batch_complete_io() adds completed I/Os to current batch
- ublk_batch_commit_io_cmds() submits batched completions to kernel
- Modified ublk_process_io() to handle batch commit lifecycle
- Enhanced ublk_complete_io() to route to batch or legacy completion
The commit buffer stores completion information (tag, result, buffer
details) for multiple I/Os, then submits them all at once, significantly
reducing syscall overhead compared to individual I/O completions.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement support for UBLK_U_IO_PREP_IO_CMDS in the batch I/O framework:
- Add batch command initialization and setup functions
- Implement prep command queueing with proper buffer management
- Add command completion handling for prep and commit commands
- Integrate batch I/O setup into thread initialization
- Update CQE handling to support batch commands
The implementation uses the previously established buffer management
infrastructure to queue UBLK_U_IO_PREP_IO_CMDS commands. Commands are
prepared in the first thread context and use commit buffers for
efficient command batching.
Key changes:
- ublk_batch_queue_prep_io_cmds() prepares I/O command batches
- ublk_batch_compl_cmd() handles batch command completions
- Modified thread setup to use batch operations when enabled
- Enhanced buffer index calculation for batch mode
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the foundational infrastructure for UBLK_F_BATCH_IO buffer
management including:
- Allocator utility functions for small sized per-thread allocation
- Batch buffer allocation and deallocation functions
- Buffer index management for commit buffers
- Thread state management for batch I/O mode
- Buffer size calculation based on device features
This prepares the groundwork for handling batch I/O commands by
establishing the buffer management layer needed for UBLK_U_IO_PREP_IO_CMDS
and UBLK_U_IO_COMMIT_IO_CMDS operations.
The allocator uses CPU sets for efficient per-thread buffer tracking,
and commit buffers are pre-allocated with 2 buffers per thread to handle
overlapping command operations.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since UBLK_F_PER_IO_DAEMON is added, io buffer index may depend on current
thread because the common way is to use per-pthread io_ring_ctx for issuing
ublk uring_cmd.
Add one helper for returning io buffer index, so we can hide the buffer
index implementation details for target code.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace assert() with ublk_assert() since it is often triggered in daemon,
and we may get nothing shown in terminal.
Add ublk_assert(), so we can log something to syslog when assert() is
triggered.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The build_user_data() function packs multiple fields into a __u64
value using bit shifts. Without explicit __u64 casts before shifting,
the shift operations are performed on 32-bit unsigned integers before
being promoted to 64-bit, causing data loss.
Specifically, when tgt_data >= 256, the expression (tgt_data << 24)
shifts on a 32-bit value, truncating the upper 8 bits before promotion
to __u64. Since tgt_data can be up to 16 bits (assertion allows up to
65535), values >= 256 would have their high byte lost.
Add explicit __u64 casts to both op and tgt_data before shifting to
ensure the shift operations happen in 64-bit space, preserving all
bits of the input values.
user_data_to_tgt_data() is only used by stripe.c, in which the max
supported member disks are 4, so won't trigger this issue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During recovery with batch I/O, UBLK_U_IO_FETCH_IO_CMDS command fails with
-ENODEV because ublk_batch_attach() rejects them when ubq->canceling is set.
The canceling flag remains set until all queues are ready.
Fix this by tracking per-queue readiness and clearing ubq->canceling as
soon as each individual queue becomes ready, rather than waiting for all
queues. This allows subsequent UBLK_U_IO_FETCH_IO_CMDS commands to succeed
during recovery.
Changes:
- Add ubq->nr_io_ready to track I/Os ready per queue
- Add ub->nr_queue_ready to track number of ready queues
- Add ublk_queue_ready() helper to check queue readiness
- Redefine ublk_dev_ready() based on queue count instead of I/O count
- Clear ubq->canceling immediately when queue becomes ready
- Add ublk_queue_reset_io_flags() to reset per-queue flags
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reduce overhead when completing multiple requests in batch I/O mode by
accumulating them in an io_comp_batch structure and completing them
together via blk_mq_end_request_batch(). This minimizes per-request
completion overhead and improves performance for high IOPS workloads.
The implementation adds an io_comp_batch pointer to struct ublk_io and
initializes it in __ublk_fetch(). For batch I/O, the pointer is set to
the batch structure in ublk_batch_commit_io(). The __ublk_complete_rq()
function uses io->iob to call blk_mq_add_to_batch() for batch mode.
After processing all batch I/Os, the completion callback is invoked in
ublk_handle_batch_commit_cmd() to complete all accumulated requests
efficiently.
So far just covers direct completion. For deferred completion(zero copy,
auto buffer reg), ublk_io_release() is often delayed in freeing buffer
consumer io_uring request's code path, so this patch often doesn't work,
also it is hard to pass the per-task 'struct io_comp_batch' for deferred
completion.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add new feature UBLK_F_BATCH_IO which replaces the following two
per-io commands:
- UBLK_U_IO_FETCH_REQ
- UBLK_U_IO_COMMIT_AND_FETCH_REQ
with three per-queue batch io uring_cmd:
- UBLK_U_IO_PREP_IO_CMDS
- UBLK_U_IO_COMMIT_IO_CMDS
- UBLK_U_IO_FETCH_IO_CMDS
Then ublk can deliver batch io commands to ublk server in single
multishort uring_cmd, also allows to prepare & commit multiple
commands in batch style via single uring_cmd, communication cost is
reduced a lot.
This feature also doesn't limit task context any more for all supported
commands, so any allowed uring_cmd can be issued in any task context.
ublk server implementation becomes much easier.
Meantime load balance becomes much easier to support with this feature.
The command `UBLK_U_IO_FETCH_IO_CMDS` can be issued from multiple task
contexts, so each task can adjust this command's buffer length or number
of inflight commands for controlling how much load is handled by current
task.
Later, priority parameter will be added to command `UBLK_U_IO_FETCH_IO_CMDS`
for improving load balance support.
UBLK_U_IO_NEED_GET_DATA isn't supported in batch io yet, but it may be
enabled in future via its batch pair.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of BATCH_IO, any request filled in event kfifo, they don't get
chance to be dispatched any more when releasing ublk char device, so
we have to abort them too.
Add ublk_abort_batch_queue() for aborting this kind of requests.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract common request preparation and cancellation logic into
__ublk_queue_rq_common() helper function. Add dedicated
ublk_batch_queue_rq() for batch mode operations to eliminate runtime check
in ublk_queue_rq().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add UBLK_U_IO_FETCH_IO_CMDS command to enable efficient batch processing
of I/O requests. This multishot uring_cmd allows the ublk server to fetch
multiple I/O commands in a single operation, significantly reducing
submission overhead compared to individual FETCH_REQ* commands.
Key Design Features:
1. Multishot Operation: One UBLK_U_IO_FETCH_IO_CMDS can fetch many I/O
commands, with the batch size limited by the provided buffer length.
2. Dynamic Load Balancing: Multiple fetch commands can be submitted
simultaneously, but only one is active at any time. This enables
efficient load distribution across multiple server task contexts.
3. Implicit State Management: The implementation uses three key variables
to track state:
- evts_fifo: Queue of request tags awaiting processing
- fcmd_head: List of available fetch commands
- active_fcmd: Currently active fetch command (NULL = none active)
States are derived implicitly:
- IDLE: No fetch commands available
- READY: Fetch commands available, none active
- ACTIVE: One fetch command processing events
4. Lockless Reader Optimization: The active fetch command can read from
evts_fifo without locking (single reader guarantee), while writers
(ublk_queue_rq/ublk_queue_rqs) use evts_lock protection. The memory
barrier pairing plays key role for the single lockless reader
optimization.
Implementation Details:
- ublk_queue_rq() and ublk_queue_rqs() save request tags to evts_fifo
- __ublk_acquire_fcmd() selects an available fetch command when
events arrive and no command is currently active
- ublk_batch_dispatch() moves tags from evts_fifo to the fetch command's
buffer and posts completion via io_uring_mshot_cmd_post_cqe()
- State transitions are coordinated via evts_lock to maintain consistency
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add infrastructure for delivering I/O commands to ublk server in batches,
preparing for the upcoming UBLK_U_IO_FETCH_IO_CMDS feature.
Key components:
- struct ublk_batch_fetch_cmd: Represents a batch fetch uring_cmd that will
receive multiple I/O tags in a single operation, using io_uring's
multishot command for efficient ublk IO delivery.
- ublk_batch_dispatch(): Batch version of ublk_dispatch_req() that:
* Pulls multiple request tags from the events FIFO (lock-free reader)
* Prepares each I/O for delivery (including auto buffer registration)
* Delivers tags to userspace via single uring_cmd notification
* Handles partial failures by restoring undelivered tags to FIFO
The batch approach significantly reduces notification overhead by aggregating
multiple I/O completions into single uring_cmd, while maintaining the same
I/O processing semantics as individual operations.
Error handling ensures system consistency: if buffer selection or CQE
posting fails, undelivered tags are restored to the FIFO for retry,
meantime IO state has to be restored.
This runs in task work context, scheduled via io_uring_cmd_complete_in_task()
or called directly from ->uring_cmd(), enabling efficient batch processing
without blocking the I/O submission path.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add ublk io events fifo structure and prepare for supporting command
batch, which will use io_uring multishot uring_cmd for fetching one
batch of io commands each time.
One nice feature of kfifo is to allow multiple producer vs single
consumer. We just need lock the producer side, meantime the single
consumer can be lockless.
The producer is actually from ublk_queue_rq() or ublk_queue_rqs(), so
lock contention can be eased by setting proper blk-mq nr_queues.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Handle UBLK_U_IO_COMMIT_IO_CMDS by walking the uring_cmd fixed buffer:
- read each element into one temp buffer in batch style
- parse and apply each element for committing io result
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit implements the handling of the UBLK_U_IO_PREP_IO_CMDS command,
which allows userspace to prepare a batch of I/O requests.
The core of this change is the `ublk_walk_cmd_buf` function, which iterates
over the elements in the uring_cmd fixed buffer. For each element, it parses
the I/O details, finds the corresponding `ublk_io` structure, and prepares it
for future dispatch.
Add per-io lock for protecting concurrent delivery and committing.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add new command UBLK_U_IO_PREP_IO_CMDS, which is the batch version of
UBLK_IO_FETCH_REQ.
Add new command UBLK_U_IO_COMMIT_IO_CMDS, which is for committing io command
result only, still the batch version.
The new command header type is `struct ublk_batch_io`.
This patch doesn't actually implement these commands yet, just validates the
SQE fields.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
batch io is designed to be independent of task context, and we will not
track task context for batch io feature.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduces the basic structure for a batched I/O feature in the ublk driver.
It adds placeholder functions and a new file operations structure,
ublk_ch_batch_io_fops, which will be used for fetching and committing I/O
commands in batches. Currently, the feature is disabled.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace unsafe core::mem::zeroed() with pin_init::zeroed() for
blk_mq_tag_set initialization.
Signed-off-by: Ke Sun <sunke@kylinos.cn>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20260120083824.477339-4-sunke@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace unsafe core::mem::zeroed() with pin_init::zeroed() for
queue_limits initialization.
Signed-off-by: Ke Sun <sunke@kylinos.cn>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20260120083824.477339-3-sunke@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When multiple io_uring rings poll on the same NVMe queue, one ring can
find completions belonging to another ring. The current code always
uses task_work to handle this, but this adds overhead for the common
single-ring case.
This patch passes the polling io_ring_ctx through io_comp_batch's new
poll_ctx field. In io_do_iopoll(), the polling ring's context is stored
in iob.poll_ctx before calling the iopoll callbacks.
In nvme_uring_cmd_end_io(), we now compare iob->poll_ctx with the
request's owning io_ring_ctx (via io_uring_cmd_ctx_handle()). If they
match (local context), we complete inline with io_uring_cmd_done32().
If they differ (remote context) or iob is NULL (non-iopoll path), we
use task_work as before.
This optimization eliminates task_work scheduling overhead for the
common case where a ring polls and finds its own completions.
~10% IOPS improvement is observed in the following benchmark:
fio/t/io_uring -b512 -d128 -c32 -s32 -p1 -F1 -O0 -P1 -u1 -n1 /dev/ng0n1
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a third parameter 'const struct io_comp_batch *' to the rq_end_io_fn
callback signature. This allows end_io handlers to access the completion
batch context when requests are completed via blk_mq_end_request_batch().
The io_comp_batch is passed from blk_mq_end_request_batch(), while NULL
is passed from __blk_mq_end_request() and blk_mq_put_rq_ref() which don't
have batch context.
This infrastructure change enables drivers to detect whether they're
being called from a batched completion path (like iopoll) and access
additional context stored in the io_comp_batch.
Update all rq_end_io_fn implementations:
- block/blk-mq.c: blk_end_sync_rq
- block/blk-flush.c: flush_end_io, mq_flush_data_end_io
- drivers/nvme/host/ioctl.c: nvme_uring_cmd_end_io
- drivers/nvme/host/core.c: nvme_keep_alive_end_io
- drivers/nvme/host/pci.c: abort_endio, nvme_del_queue_end, nvme_del_cq_end
- drivers/nvme/target/passthru.c: nvmet_passthru_req_done
- drivers/scsi/scsi_error.c: eh_lock_door_done
- drivers/scsi/sg.c: sg_rq_end_io
- drivers/scsi/st.c: st_scsi_execute_end
- drivers/target/target_core_pscsi.c: pscsi_req_done
- drivers/md/dm-rq.c: end_clone_request
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace XXX with what it actually means.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the comment for blk_zone_cond_str() by replacing the meaningless
BLK_ZONE_ZONE_XXX comment with the correct BLK_ZONE_COND_name, thus also
replacing the XXX with what that actually means.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DMA IOVA state is not used inside blk_rq_dma_map_iter_next, get
rid of the argument.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add 'stop' subcommand to kublk utility that uses the new
UBLK_CMD_TRY_STOP_DEV command when --safe option is specified.
This allows stopping a device only if it has no active openers,
returning -EBUSY otherwise.
Also add test_generic_16.sh to test the new functionality.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a best-effort stop command, UBLK_CMD_TRY_STOP_DEV, which only stops a
ublk device when it has no active openers.
Unlike UBLK_CMD_STOP_DEV, this command does not disrupt existing users.
New opens are blocked only after disk_openers has reached zero; if the
device is busy, the command returns -EBUSY and leaves it running.
The ub->block_open flag is used only to close a race with an in-progress
open and does not otherwise change open behavior.
Advertise support via the UBLK_F_SAFE_STOP_DEV feature flag.
Signed-off-by: Yoav Cohen <yoav@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
