- Add support for a new Goodix HID over SPI driver (Charles Wang)
Note: this driver doesn't rely on the spefication of HID over SPI
provided by Microsoft, thus needs a separate driver, not a generic bus
transport low level driver.
Various Wacom fixes (Jason Gerecke):
- Support for high-resolution wheel scrolling
- Support touchrings with relative motion
- Support devices with two touchrings
- Support sequence numbers smaller than 16-bit
i2c-hid uses 2 shared buffers: command and "raw" input buffer for
sending requests to peripherals and read data from peripherals when
executing variety of commands. Such commands include reading of HID
registers, requesting particular power mode, getting and setting
reports and so on. Because all such requests use the same 2 buffers
they should not execute simultaneously.
Fix this by introducing "cmd_lock" mutex and acquire it whenever
we needs to access ihid->cmdbuf or idid->rawbuf.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This applies similar quirks used by previous generation device, so that
Trackpoint and buttons on the touchpad works. New USB KBD PID 0x61AE for
Thinkpad X12 Tab is added.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The driver currently assumes that the first sequence number it will see
is going to be 0. This is not a realiable assumption and can break if,
for example, the tablet has already been running for some time prior to
the kernel driver connecting to the device. This commit initializes the
expected sequence number to -1 and will only print the "Dropped" warning
the it has been updated to a non-negative value.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Fixes: 6d09085b38 ("HID: wacom: Adding Support for new usages")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The current dropped packet reporting assumes that all sequence numbers
are 16 bits in length. This results in misleading "Dropped" messages if
the hardware uses fewer bits. For example, if a tablet uses only 8 bits
to store its sequence number, once it rolls over from 255 -> 0, the
driver will still be expecting a packet "256". This patch adjusts the
logic to reset the next expected packet to logical_minimum whenever
it overflows beyond logical_maximum.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Fixes: 6d09085b38 ("HID: wacom: Adding Support for new usages")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The patch is to add proper quirks for sis multitouch format
Signed-off-by: tammy tseng <tammy0524@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The 2024 Lenovo Y9000P which use GT7868Q chip also needs a fixup.
The information of the chip is as follows:
I2C HID v1.00 Mouse [GXTP5100:00 27C6:01E0]
Signed-off-by: He Lugang <helugang@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The issue is GOODIX_HID_PKG_LEN_SIZE is defined as sizeof(u16) which is
type size_t. However, goodix_hid_check_ack_status() returns negative
error codes or potentially a positive but invalid length which is too
small. So when we compare "if ((response_data_len <=
GOODIX_HID_PKG_LEN_SIZE)" then negative error codes are type promoted to
size_t and counted as a positive large value and treated as valid.
It would have been easy enough to add some casting to avoid the type
promotion, however this patch takes a more thourough approach and moves
the length check into goodix_hid_check_ack_status(). Now the function
only return negative error codes or zero on success and the length
pointer is never set to an invalid length.
Fixes: 75e16c8ce2 ("HID: hid-goodix: Add Goodix HID-over-SPI driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Largely inspired from hid_bpf.c for the fixture setup.
Create a couple of tests for hidraw:
- create a uhid device and check if the fixture is working properly
- inject one uhid event and read it through hidraw
These tests are not that useful for now, but will be once we start adding
the ioctl and BPFs to revoke the hidraw node.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-3-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
When adding new tests programs, we need the same mechanics to create
new virtual devices, and read from their matching hidraw node.
Extract the common part into its own header so we can easily add new
tests C-files.
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-2-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
There is a need for userspace applications to open HID devices directly.
Use-cases include configuration of gaming mice or direct access to
joystick devices. The latter is currently handled by the uaccess tag in
systemd, other devices include more custom/local configurations or just
sudo.
A better approach is what we already have for evdev devices: give the
application a file descriptor and revoke it when it may no longer access
that device.
This patch is the hidraw equivalent to the EVIOCREVOKE ioctl, see
commit c7dc65737c ("Input: evdev - add EVIOCREVOKE ioctl") for full
details.
An MR for systemd-logind has been filed here:
https://github.com/systemd/systemd/pull/33970
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20240827-hidraw-revoke-v5-1-d004a7451aea@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
By allowing the drivers to return a "const *" they can constify their
static report arrays.
This makes it clear to driver authors that the HID core will not modify
those reports and they can be reused for multiple devices.
Furthermore security is slightly improved as those reports are protected
against accidental or malicious modifications.
[bentiss: fixup hid-cougar.c and hid-multitouch.c for latest version of
the master branch]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-6-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Once a report descriptor has been created by the HID core it is not
supposed to be modified anymore.
Enforce this invariant through the type system.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-5-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
fetch_item() does not modify the descriptor it operates on.
As a prerequisite for the constification of hid_driver::dev_rdesc,
mark the parameters and return value of fetch_item() as const.
Also adapt the variable types in the callers to match this
constification.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-4-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Once a report descriptor has been created by the HID core it is not
supposed to be modified anymore.
Enforce this invariant through the type system.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-3-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The parameter is never modified, so mark it as const.
Also inline the return statement to avoid a type mismatch error.
This is a prerequisite for constification changes in the HID core.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-1-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch introduces a new driver to support the Goodix GT7986U
touch controller. This device is not compatible with Microsoft's
HID-over-SPI protocol and therefore needs to implement its own
flavor. The data reported is packaged according to the HID
protocol but uses SPI for communication to improve speed. This
enables the device to transmit not only coordinate data but also
corresponding raw data that can be accessed by user-space programs
through the hidraw interface. The raw data can be utilized for
functions like palm rejection, thereby improving the touch experience.
Key features:
- Device connection confirmation and initialization
- IRQ-based event reporting to the input subsystem
- Support for HIDRAW operations (GET_REPORT and SET_REPORT)
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Charles Wang <charles.goodix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Enhance the firmware loader to support the loading of vendor-specific
customized firmware for the Intel Integrated Sensor Hub (ISH). The
loader now constructs firmware file names based on the DMI_SYS_VENDOR,
DMI_PRODUCT_NAME, and DMI_PRODUCT_SKU information in Desktop Management
Interface (DMI). The loader will attempt to load the firmware files
following a specific naming convention in sequence. If successful, it
will skip the remaining files.
For more details, please refer to Documentation/hid/intel-ish-hid.rst.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
ISH allows vendors to customize ISH firmware. To differentiate different
vendors and load the correct firmware, Intel defined a firmware file
name format. As part of the filename, there is a "generation" string. To
load correct format the driver must know the generation name to create
file name.
In the absence of any vendor specific firmware, default ISH firmware is
loaded.
Currently full ISH firmware file name is stored as part of driver data.
This file name already includes the generation name. For example, for
Lunar Lake, the name is ish_lnlm.bin, where "lnlm" is the generation.
So instead of storing both generation name and ISH default firmware file
name, just store generation name and create the default ISH firmware
file name string during initialization.
No functional changes are expected.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
