generic_file_direct_write() does all sorts of things to make DIO
work "sorta ok" with mixed buffered IO workloads. We already do
most of this work in xfs_file_aio_dio_write() because of the locking
requirements, so there's only a couple of things it does for us.
The first thing is that it does a page cache invalidation after the
->direct_IO callout. This can easily be added to the XFS code.
The second thing it does is that if data was written, it updates the
iov_iter structure to reflect the data written, and then does EOF
size updates if necessary. For XFS, these EOF size updates are now
not necessary, as we do them safely and race-free in IO completion
context. That leaves just the iov_iter update, and that's also moved
to the XFS code.
Therefore we don't need to call generic_file_direct_write() and in
doing so remove redundant buffered writeback and page cache
invalidation calls from the DIO submission path. We also remove a
racy EOF size update, and make the DIO submission code in XFS much
easier to follow. Wins all round, really.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we are doing AIO DIO writes, the IOLOCK only provides an IO
submission barrier. When we need to do EOF zeroing, we need to ensure
that no other IO is in progress and all pending in-core EOF updates
have been completed. This requires us to wait for all outstanding
AIO DIO writes to the inode to complete and, if necessary, run their
EOF updates.
Once all the EOF updates are complete, we can then restart
xfs_file_aio_write_checks() while holding the IOLOCK_EXCL, knowing
that EOF is up to date and we have exclusive IO access to the file
so we can run EOF block zeroing if we need to without interference.
This gives EOF zeroing the same exclusivity against other IO as we
provide truncate operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_end_io_direct_write() can race with other IO completions when
updating the in-core inode size. The IO completion processing is not
serialised for direct IO - they are done either under the
IOLOCK_SHARED for non-AIO DIO, and without any IOLOCK held at all
during AIO DIO completion. Hence the non-atomic test-and-set update
of the in-core inode size is racy and can result in the in-core
inode size going backwards if the race if hit just right.
If the inode size goes backwards, this can trigger the EOF zeroing
code to run incorrectly on the next IO, which then will zero data
that has successfully been written to disk by a previous DIO.
To fix this bug, we need to serialise the test/set updates of the
in-core inode size. This first patch introduces locking around the
relevant updates and checks in the DIO path. Because we now have an
ioend in xfs_end_io_direct_write(), we know exactly then we are
doing an IO that requires an in-core EOF update, and we know that
they are not running in interrupt context. As such, we do not need to
use irqsave() spinlock variants to protect against interrupts while
the lock is held.
Hence we can use an existing spinlock in the inode to do this
serialisation and so not need to grow the struct xfs_inode just to
work around this problem.
This patch does not address the test/set EOF update in
generic_file_write_direct() for various reasons - that will be done
as a followup with separate explanation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
DIO writes that lie entirely within EOF have nothing to do in IO
completion. In this case, we don't need no steekin' ioend, and so we
can avoid allocating an ioend until we have a mapping that spans
EOF.
This means that IO completion has two contexts - deferred completion
to the dio workqueue that uses an ioend, and interrupt completion
that does nothing because there is nothing that can be done in this
context.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently a DIO overwrite that extends the EOF (e.g sub-block IO or
write into allocated blocks beyond EOF) requires a transaction for
the EOF update. Thi is done in IO completion context, but we aren't
explicitly handling this situation properly and so it can run in
interrupt context. Ensure that we defer IO that spans EOF correctly
to the DIO completion workqueue, and now that we have an ioend in IO
completion we can use the common ioend completion path to do all the
work.
Note: we do not preallocate the append transaction as we can have
multiple mapping and allocation calls per direct IO. hence
preallocating can still leave us with nested transactions by
attempting to map and allocate more blocks after we've preallocated
an append transaction.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently we can only tell DIO completion that an IO requires
unwritten extent completion. This is done by a hacky non-null
private pointer passed to Io completion, but the private pointer
does not actually contain any information that is used.
We also need to pass to IO completion the fact that the IO may be
beyond EOF and so a size update transaction needs to be done. This
is currently determined by checks in the io completion, but we need
to determine if this is necessary at block mapping time as we need
to defer the size update transactions to a completion workqueue,
just like unwritten extent conversion.
To do this, first we need to allocate and pass an ioend to to IO
completion. Add this for unwritten extent conversion; we'll do the
EOF updates in the next commit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The mapping size calculation is done last in __xfs_get_blocks(), but
we are going to need the actual mapping size we will use to map the
direct IO correctly in xfs_map_direct(). Factor out the calculation
for code clarity, and move the call to be the first operation in
mapping the extent to the returned buffer.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Clarify and separate the buffer mapping logic so that the direct IO mapping is
not tangled up in propagating the extent status to teh mapping buffer. This
makes it easier to extend the direct IO mapping to use an ioend in future.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The Displayport Link Layer Compliance Testing Specification 1.2 rev 1.1
specifies that repeated AUX transactions after a failure (no response /
invalid response) must have a minimum delay of 400us before the resend can
occur. Tests 4.2.1.1 and 4.2.1.2 are two tests that require this specifically.
Also, the check for DP_AUX_CH_CTL_TIME_OUT_ERROR has been moved out into a
separate case. This case just continues with the next iteration of the loop
as the HW has already waited the required amount of time.
V2:
- Changed udelay() to usleep_range()
V3:
- Removed extraneous check for timeout
- Updated comment to reflect this change
V4:
- Reformatted a comment
V5:
- Added separate check for HW timeout on AUX transactions. A message
is logged upon detection of this case.
V6:
- Add continue statement to HW timeout detect case
- Remove the log message indicating a timeout has been
detected (review feedback)
V7:
- Updated the commit message to remove verbage about the HW timeout
case that is no longer valid.
Signed-off-by: Todd Previte <tprevite@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add the skeleton framework for supporting automation for Displayport compliance
testing. This patch adds the necessary framework for the source device to
appropriately respond to test automation requests from a sink device.
V2:
- Addressed previous mailing list feedback
- Fixed compilation issue (struct members declared in a later patch)
- Updated debug messages to be more accurate
- Added status checks for the DPCD read/write calls
- Removed excess comments and debug messages
- Fixed debug message compilation warnings
- Fixed compilation issue with missing variables
- Updated link training autotest to ACK
V3:
- Fixed the checks on the DPCD return code to be <= 0
rather than != 0
- Removed extraneous assignment of a NAK return code in the
DPCD read failure case
- Changed the return in the DPCD read failure case to a goto
to the exit point where the status code is written to the sink
- Removed FAUX test case since it's deprecated now
- Removed the compliance flag assignment in handle_test_request
V4:
- Moved declaration of type_type here
- Removed declaration of test_data (moved to a later patch)
- Added reset to 0 for compliance test variables
V5:
- Moved test_active variable declaration and initialization out of
this patch and into the patch where it's used
- Changed variable name compliance_testing_active to
compliance_test_active to unify the naming convention
- Added initialization for compliance_test_type variable
Signed-off-by: Todd Previte <tprevite@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When the TIF_SINGLESTEP tracee dequeues a signal,
handle_signal() clears TIF_FORCED_TF and X86_EFLAGS_TF but
leaves TIF_SINGLESTEP set.
If the tracer does PTRACE_SINGLESTEP again, enable_single_step()
sets X86_EFLAGS_TF but not TIF_FORCED_TF. This means that the
subsequent PTRACE_CONT doesn't not clear X86_EFLAGS_TF, and the
tracee gets the wrong SIGTRAP.
Test-case (needs -O2 to avoid prologue insns in signal handler):
#include <unistd.h>
#include <stdio.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <sys/user.h>
#include <assert.h>
#include <stddef.h>
void handler(int n)
{
asm("nop");
}
int child(void)
{
assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0);
signal(SIGALRM, handler);
kill(getpid(), SIGALRM);
return 0x23;
}
void *getip(int pid)
{
return (void*)ptrace(PTRACE_PEEKUSER, pid,
offsetof(struct user, regs.rip), 0);
}
int main(void)
{
int pid, status;
pid = fork();
if (!pid)
return child();
assert(wait(&status) == pid);
assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGALRM);
assert(ptrace(PTRACE_SINGLESTEP, pid, 0, SIGALRM) == 0);
assert(wait(&status) == pid);
assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
assert((getip(pid) - (void*)handler) == 0);
assert(ptrace(PTRACE_SINGLESTEP, pid, 0, SIGALRM) == 0);
assert(wait(&status) == pid);
assert(WIFSTOPPED(status) && WSTOPSIG(status) == SIGTRAP);
assert((getip(pid) - (void*)handler) == 1);
assert(ptrace(PTRACE_CONT, pid, 0,0) == 0);
assert(wait(&status) == pid);
assert(WIFEXITED(status) && WEXITSTATUS(status) == 0x23);
return 0;
}
The last assert() fails because PTRACE_CONT wrongly triggers
another single-step and X86_EFLAGS_TF can't be cleared by
debugger until the tracee does sys_rt_sigreturn().
Change handle_signal() to do user_disable_single_step() if
stepping, we do not need to preserve TIF_SINGLESTEP because we
are going to do ptrace_notify(), and it is simply wrong to leak
this bit.
While at it, change the comment to explain why we also need to
clear TF unconditionally after setup_rt_frame().
Note: in the longer term we should probably change
setup_sigcontext() to use get_flags() and then just remove this
user_disable_single_step(). And, the state of TIF_FORCED_TF can
be wrong after restore_sigcontext() which can set/clear TF, this
needs another fix.
This fix fixes the 'single_step_syscall_32' testcase in
the x86 testsuite:
Before:
~/linux/tools/testing/selftests/x86> ./single_step_syscall_32
[RUN] Set TF and check nop
[OK] Survived with TF set and 9 traps
[RUN] Set TF and check int80
[OK] Survived with TF set and 9 traps
[RUN] Set TF and check a fast syscall
[WARN] Hit 10000 SIGTRAPs with si_addr 0xf7789cc0, ip 0xf7789cc0
Trace/breakpoint trap (core dumped)
After:
~/linux/linux/tools/testing/selftests/x86> ./single_step_syscall_32
[RUN] Set TF and check nop
[OK] Survived with TF set and 9 traps
[RUN] Set TF and check int80
[OK] Survived with TF set and 9 traps
[RUN] Set TF and check a fast syscall
[OK] Survived with TF set and 39 traps
[RUN] Fast syscall with TF cleared
[OK] Nothing unexpected happened
Reported-by: Evan Teran <eteran@alum.rit.edu>
Reported-by: Pedro Alves <palves@redhat.com>
Tested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
[ Added x86 self-test info. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a very simple test that makes system calls with TF set.
This test currently fails when running the 32-bit build on a
64-bit kernel on an Intel CPU. This bug will be fixed by the
next commit.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Shuah Khan <shuah.kh@samsung.com>
Link: http://lkml.kernel.org/r/20e68021155f6ab5c60590dcad81d37c68ea2c4f.1429139075.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For fixed sized copies, copy_to_user() will utilize
__put_user_size() fastpaths. However, it is missing the
translation for 64-bit copies on x86/32.
Testing on a Pinetrail Atom, the 64 bit put_user() fastpath
is substantially faster than the generic copy_to_user()
fallback.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Link: http://lkml.kernel.org/r/1429091486-11443-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I seem to have failed to run the build test properly...
sound/pci/hda/hda_tegra.c: In function 'hda_tegra_dev_free':
sound/pci/hda/hda_tegra.c:310:20: error: 'bus' undeclared (first use in this function)
snd_hdac_bus_exit(bus);
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
intel_ is for generic code bxt_ and friends for platform specific
functions. Remove the intel_ prefix to be consistent with our naming.
Random OCD bikeshed I've spotted while merging bxt patches.
v2: Oops, git add fail.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
After correcting the fields to point the right members, tracepoints
can be reenabled again for the legacy controller code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Broxton supports 3 voltage swing levels on all DP ports.
Max level of pre-emphasis will be taken care with the existing code.
v2: Patch rebased
v3: (imre)
- keep existing behavior for other platforms
- clarify commit message
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
VSwing programming sequence as specified in the updated BXT BSpec
v2: Satheesh's review comments addressed.
- clear value before setting into registers
- move print statement to bxt function
Other changes
- since signal level will not be set into DDI_BUF_CTL, the value need
not be returned to intel_dp_set_signal_levels(). Making the bxt
specific function to return void and setting signal_levels = 0 for
bxt inside intel_dp_set_signal_levels()
- instead of signal levels, printing vswing level and pre-emphasis
level
- in case none of the pre-emphasis levels or vswing levels are set,
setting default of 400mV + 0dB
v3: Satheesh's review comments
- Check for mask before printing signal_levels.
- Removing redundant register writes
- Call intel_prepare_ddi_buffers only for HAS_PCH_SPLIT
- Making register write part generic as it will be required for HDMI as
well.
Re-structure the code to include an array for vswing related values, set
signal levels
v4: Satheesh's review comments
- Rebase over latest renaming patches
- use hsw_signal_levels for HAS_DDI
Other changes
- Modified vswing_sequence() func definition
- Rebased on top of register macro definitions
v5: Satheesh's review comments
- Check ddi translation table size
v6: Imre's review comments
- removed comments in vswing sequence
- added vswing, pre-emphasis prints in intel_dp_set_signal_levels
- added comment explaining use of DP vswing values for eDP
- initialize n_entries and ddi_transaltion table based on encoder type
- create bxt_ddi_buf_trans structure and use decimal values
- adding a flag in bxt buffer translation table to indicate def entry
v7: (imre)
- squash in Vandana's "VSwing register definition",
"HDMI VSwing programming", "Re-enable vswing programming",
"Fix vswing sequence" patches
- use BXT_PORT_* regs directly instead of via a temp var
- simplify BXT_PORT_* macro definitions
- add code comment why we read lane while write group registers
- fix readout of DP_TRAIN_PRE_EMPHASIS in debug message
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v6)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We don't actually need to write the HDMI entry on DDIs that have no
chance to be used as HDMI ports.
While this patch shouldn't change the current behaviour, it makes
further enabling work easier as we'll have an eDP table filling the full
10 entries.
v2: Rely on the logic from intel_ddi_init() to figure out if the DDI port
supports HDMI or not (Paulo).
Suggested-by: Satheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Not every DDIs is necessarily connected can be strapped off and, in the
future, we'll have platforms with a different number of default DDI
ports. So, let's only call intel_prepare_ddi_buffers() on DDI ports that
are actually detected.
We also use the opportunity to give a struct intel_digital_port to
intel_prepare_ddi_buffers() as we'll need it in a following patch to
query if the port supports HMDI or not.
On my HSW machine this removes the initialization of a couple of
(unused) DDIs.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The checks for PLL enabled state on CPU ports are valid only on GMCH
platforms but atm we'd also call them on non-PCH-split/non-GMCH
platforms like BXT, triggering false warnings. Until the proper check is
implented for these platforms simply disable the check.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add placeholder function for calculating programmed pixel clock.
Note: Formula to back calculate link clock from dividers not
available currently.
v2:
- rebased on upstream s/crtc_config/crtc_state/ change (imre)
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Determine PLL attached to pipe (which is same as DDI PLL)
v2:
- rebased on upstream s/crtc_config/crtc_state/ (imre)
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Assign PLL for pipe (dependent on port attached to the pipe)
v2:
- fix incorrect encoder vs. new_encoder check for crtc (imre)
v3:
- warn and return error if no encoder is attached (imre)
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Don't move intel_ddi_get_crtc_new_encoder around.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For fixing randconfig build errors like:
sound/hda/hdac_stream.c: In function 'azx_timecounter_init':
sound/hda/hdac_stream.c:365:2: error: implicit declaration of function 'CLOCKSOURCE_MASK' [-Werror=implicit-function-declaration]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Calculate and cache clock parameters. Follow bspec algorithm for HDMI.
Use precalculated values for DisplayPort linkrates.
v2: (imre)
- rebase against upstream crtc_state change
- use the existing CHV based helper instead of handrolling the same
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Plug bxt PLL code into existing shared DPLL framework.
v2: (imre)
- squash in Satheeshakrishna's "Define BXT clock registers" and
"Add state variables for bxt clock registers" patches
- squash in Vandanas's "Change grp access to lane access for PLL"
- fix group vs. lane access in bxt_ddi_pll_get_hw_state
- add code comment why we read from lane registers while writing to
group registers
- clean up register macros
- use BXT_PORT_PLL_* macros instead of open-coding the same
- check if BXT_PORT_PCS_DW12_LN01 matches BXT_PORT_PCS_DW12_LN23
during hardware state readout
- add missing LANESTAGGER_STRAP_OVRD masking
- add note about missing step according to the latest BUN for
PORT_PLL_9/lockthresh
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Broxton has the same panel fitter registers as Skylake.
v2:
- add MISSING_CASE for future platforms (daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
PORT_CLK_SEL programming is needed only on HSW/BDW.
v2:
- don't program PORT_CLK_SEL from mst encoders either (imre)
v3:
- fix the check for GEN9+ in intel_mst_pre_enable_dp() (damien)
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Same as IBX and G4x, they all share the same genetic material.
v2: we all need a bit more port in our lives
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since the pin_ioctl is defunct, we only care about whether an object is
pinned into the display for debug purposes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since the removal of the user pin_ioctl, the only means for pinning an
object is either through binding to the scanout or during execbuf
reservation. As the later prevents a call to set-tiling, we need only
check if the obj is pinned into the display plane to see if we need
reject the set-tiling ioctl.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The HDMI translation table is added back to bspec, so adding it,
and defaulting the 800mV+0dB entry.
The HDMI translation table was removed by following commit as per HW team's
recommendation:
commit 7ff446708b ("drm/i915/skl: Only use the 800mV+2bB HDMI translation entry")
v2: Adding reference to commit which removed this table (Jani)
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is a separate patch to simplify conflict handling with other
ongoing atomic work.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since universal planes the primary plane might not be around, and it's
kinda silly to restrict the pipe bpp to the primary plane if we might
end up displaying a 10bpc video overlay. And with atomic we might very
well enable a pipe without a primary plane. So just use the platform
max as a starting point and then restrict appropriately.
Of course this is all still a bit moot as long as we artificially
compress everything to max 8bpc because we don't use the hi-bpc gamma
tables.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
One month passed between posting a patch and it getting merged, and
unfortunately even though it still applies, it needs fixing to account
for changes in function parameters since:
commit d385612e15b8b6eb3db328d83f1872ef8a381788
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Tue Mar 17 14:45:29 2015 +0000
drm/i915: Log view type when printing warnings
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: Squash in fixup from Tvrtko to fix the rebase conflict.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
DEVICE_ALI previously would jump to port_inited after calling
pci_iomap(), bypassing the check for bmaddr being NULL.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Because AZX_DCAPS_PM_RUNTIME is always defined as non-zero, the
initial part of the expression can be skipped.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's a silly thing to do and surprises driver writers. Most likely
this did already blow up for exynos.
It's also a silly thing to change plane state when it's off, but fbdev
is silly (it does an unconditional modeset over all planes). And
userspace can be evil. So I think we need this.
With this check in the helpers we can remove the one in i915 code for
the same conditions (becuase ->crtc iff ->fb).
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Add triggers for DC9 as per details provided in bxt_enable_dc9
and bxt_disable_dc9 implementations.
v1:
- Add SKL check in gen9_disable_dc5 as it is possible for DC5
to remain disabled only for SKL.
- Add additional checks for whether DC5 is already disabled during
DC5-disabling only for BXT.
v2:
- rebase to latest.
- Load CSR during DC9 disabling in the beginning before DC9 is
disabled.
- Make gen9_disable_dc5 function non-static as it's being called by
functions in i915_drv.c.
- Enable DC9-related functionality using a macro.
v3: (imre)
- remove BXT_ENABLE_DC9, we want DC9 always, and it's only valid on BXT
- remove DC5 disabling and CSR FW loaded check, these are nop atm
- squash in Vandana's "Do ddi_phy_init always" patch
v4:
- add TODO to re-enable DC5 during resume if CSR FW is available (sagar)
Signed-off-by: Suketu Shah <suketu.j.shah@intel.com>
Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since commit:
029632fbb7 ("sched: Make separate sched*.c translation units")
autogroup is a separate translation unit built from the Makefile and
thus no longer needs its content wrapped with #ifdef CONFIG_SCHED_AUTOGROUP.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1429116678-17000-1-git-send-email-tklauser@distanz.ch
Signed-off-by: Ingo Molnar <mingo@kernel.org>
v2: Modified as per review comments from Imre
- Mention enabling instead of allowing in the debug trace and
remove unnecessary comments.
v3:
- Rebase to latest.
- Move DC9-related functions from intel_display.c to intel_runtime_pm.c.
v4: (imre)
- remove DC5 disabling, it's a nop at this point
- squashed in Suketu's "Assert the requirements to enter or exit DC9"
patch
- remove check for RUNTIME_PM from assert_can_enable_dc9, it's not a
dependency
Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> (v3)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Extend the VLV/CHV DPIO (PHY) documentation with the BXT specifics.
v2:
- add more detail about the mapping between ports and transcoders (ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add PHY specific display initialization sequence as per BSpec.
Note that the PHY initialization/uninitialization are done
at their current place only for simplicity, in a future patch - when more
of the runtime PM features will be enabled - these will be moved to
power well#1 and modeset encoder enabling/disabling hooks respectively.
The call to uninitialize the PHY during system/runtime suspend will be
added later in this patchset.
v1: Added function definitions in header files
v2: Imre's review comments addressed
- Moved CDCLK related definitions to i915_reg.h
- Removed defintions for CDCLK frequency
- Split uninit_cdclk() by adding a phy_uninit function
- Calculate freq and decimal based on input frequency
- Program SSA precharge based on input frequency
- Use wait_for 1ms instead 200us udelay for DE PLL locking
- Removed initial value for divider, freq, decimal, ratio.
- Replaced polling loops with wait_for
- Parameterized latency optim setting
- Fix the parts where DE PLL has to be disabled.
- Call CDCLK selection from mode set
v3: (imre)
- add note about the plan to move the cdclk/phy init to a better place
- take rps.hw_lock around pcode access
- fix DDI PHY timeout value
- squash in Vandana's "PORT_CL2CM_DW6_A BUN fix",
"DDI PHY programming register defn", "Do ddi_phy_init always",
- move PHY register macros next to the corresponding CHV/VLV macros
- move DE PLL register macros here from another patch since they are
used here first
- add BXT_ prefix to CDCLK flags
- s/COMMON_RESET/COMMON_RESET_DIS/ and clarify related code comments
- fix incorrect read value for the RMW of BXT_PHY_CTL_FAMILY_DDI
- fix using GT_DISPLAY_EDP_POWER_ON vs. GT_DISPLAY_DDI_POWER_ON
when powering on DDI ports
- fix incorrect port when setting BXT_PORT_TX_DW14_LN for DDI ports
- add missing masking when programming CDCLK_FREQ_DECIMAL
- add missing powering on for DDI-C port, rename OCL2_LDOFUSE_PWR_EN
to OCL2_LDOFUSE_PWR_DIS to reduce confusion
- add note about mismatch with bspec in the PORT_REF_DW6 fields
- factor out PHY init code to a new function, so we can call it for
PHY1 and PHY0, instead of open-coding the same
v4: (ville)
- split the CDCLK/PHY parts into two patches, update commit message
accordingly
- use the existing dpio_phy enum instead of adding a new one for the
same purpose
- flip the meaning of PHYs so that PHY_A is PHY1 and PHY_BC is PHY0 to
better match CHV
- s/BXT_PHY/_BXT_PHY/
- use _PIPE for _BXT_PHY instead of open-coding it
- drop _0_2_0_GTTMMADR suffix from BXT_P_CR_GT_DISP_PWRON
- define GT_DISPLAY_POWER_ON in a more standard way
- make a note that the CHV ConfigDB also disagrees about GRC_CODE field
definitions
- fix lane optimization refactoring fumble from v3
- add per PHY uninit functions to match the init counterparts
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add CDCLK specific display clock initialization sequence as per BSpec.
Note that the CDCLK initialization/uninitialization are done at their
current place only for simplicity, in a future patch - when more of the
runtime PM features will be enabled - these will be moved to power
well#1 and modeset encoder enabling/disabling hooks respectively. This
also means that atm dynamic power gating power well #1 is effectively
disabled.
The call to uninitialize CDCLK during system/runtime suspend will be
added later in this patchset.
v1: Added function definitions in header files
v2: Imre's review comments addressed
- Moved CDCLK related definitions to i915_reg.h
- Removed defintions for CDCLK frequency
- Split uninit_cdclk() by adding a phy_uninit function
- Calculate freq and decimal based on input frequency
- Program SSA precharge based on input frequency
- Use wait_for 1ms instead 200us udelay for DE PLL locking
- Removed initial value for divider, freq, decimal, ratio.
- Replaced polling loops with wait_for
- Parameterized latency optim setting
- Fix the parts where DE PLL has to be disabled.
- Call CDCLK selection from mode set
v3: (imre)
- add note about the plan to move the cdclk/phy init to a better place
- take rps.hw_lock around pcode access
- move DE PLL register macros here from another patch since they are
used here first
- add BXT_ prefix to CDCLK flags
- add missing masking when programming CDCLK_FREQ_DECIMAL
v4: (ville)
- split the CDCLK/PHY parts into two patches, update commit message
accordingly
- s/DISPLAY_PCU_CONTROL/HSW_PCODE_DE_WRITE_FREQ_REQ/
- simplify BXT_DE_PLL_RATIO macros
- fix BXT_DE_PLL_RATIO_MASK
- s/bxt_select_cdclk_freq/broxton_set_cdclk_freq/
- move cdclk init/uninit/set code from intel_ddi.c to intel_display.c
- remove redundant code comments for broxton_set_cdclk_freq()
- sanitize fixed point<->integer frequency value conversion
- use DRM_ERROR instead of WARN
- do RMW when programming BXT_DE_PLL_CTL for safety
- add note about PLL lock timeout being exactly 200us
- make PCU error messages more descriptive
- instead of using 0 freq to mean PLL off/bypass freq use 19200
for clarity, as the latter one is the actual rate
- simplify pcode programming, removing duplicated
sandybridge_pcode_write() call
- sanitize code flow, remove unnecessary scratch vars in
broxton_set_cdclk() (imre)
- Remove bound check for maxmimum freq to match current code.
This check will be added later at a more proper platform
independent place once atomic support lands.
- add note to remove freq guard band which isn't needed on BXT
- add note to reduce freq to minimum if no pipe is enabled
- combine broxton_modeset_global_pipes() with
valleyview_modeset_global_pipes()
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
