Florian Fainelli says:
====================
net: bcmgenet: integrated GPHY power up/down
This patch series implements integrated Gigabit PHY power up/down, which allows
us to save close to 300mW on some designs when the Gigabit PHY is known to be
unused (e.g: during bcmgenet_close or bcmgenet_suspend not doing Wake-on-LAN).
Changes in v2:
- drop an extra bcmgenet_ext_readl in bcmgenet_phy_power_set
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case the interface is not used, power down the integrated GPHY during
suspend. Similarly to bcmgenet_open(), bcmgenet_resume() powers on the GPHY
prior to any UniMAC activity.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Power up the GPHY while we are bringing-up the network interface, and
conversely, upon bring down, power the GPHY down. In order to avoid
creating hardware hazards, make sure that the GPHY gets powered on
during bcmgenet_open() prior to the UniMAC being reset as the UniMAC may
start creating activity towards the GPHY if we reverse the steps.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the GPHY power down sequence by setting all power down bits, putting
the GPHY in reset, and finally cutting the 25Mhz reference clock.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We were missing a number of extra steps and delays to power-up the GPHY, update
the sequence to reflect the proper procedure here.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for implementing the power down GPHY sequence, rename
bcmgenet_ephy_power_up to illustrate that it is not EPHY specific but
PHY agnostic, and add an "enable" argument.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CK25_DIS bit controls whether a 25Mhz clock is fed to the GPHY or
not, in preparation for powering down the integrated GPHY when relevant,
make sure we clear that bit.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If bcmgenet_power_down() fails, we would want to propagate a return
value from bcmgenet_wol_power_down_cfg() to know about this.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu says:
====================
rhashtable: Multiple rehashing
This series introduces multiple rehashing.
Recall that the original implementation in br_multicast used
two list pointers per hash node and therefore is limited to at
most one rehash at a time since you need one list pointer for
the old table and one for the new table.
Thanks to Josh Triplett's suggestion of using a single list pointer
we're no longer limited by that. So it is perfectly OK to have
an arbitrary number of tables in existence at any one time.
The reader and removal simply has to walk from the oldest table
to the newest table in order not to miss anything. Insertion
without lookup are just as easy as we simply go to the last table
that we can find and add the entry there.
However, insertion with uniqueness lookup is more complicated
because we need to ensure that two simultaneous insertions of the
same key do not both succeed. To achieve this, all insertions
including those without lookups are required to obtain the bucket
lock from the oldest hash table that is still alive. This is
determined by having the rehasher (there is only one rehashing
thread in the system) keep a pointer of where it is up to. If
a bucket has already been rehashed then it is dead, i.e., there
cannot be any more insertions to it, otherwise it is considered
alive. This guarantees that the same key cannot be inserted
in two different tables in parallel.
Patch 1 is actually a bug fix for the walker.
Patch 2-5 eliminates unnecessary out-of-line copies of jhash.
Patch 6 makes rhashtable_shrink shrink to fit.
Patch 7 introduces multiple rehashing. This means that if we
decide to grow then we will grow regardless of whether the previous
one has finished. However, this is still asynchronous meaning
that if insertions come fast enough we may still end up with a
table that is overutilised.
Patch 8 adds support for GFP_ATOMIC allocations of struct bucket_table.
Finally patch 9 enables immediate rehashing. This is done either
when the table reaches 100% utilisation, or when the chain length
exceeds 16 (the latter can be disabled on request, e.g., for
nft_hash.
With these patches the system should no longer have any trouble
dealing with fast insertions on a small table. In the worst
case you end up with a list of tables that's log N in length
while the rehasher catches up.
v3 restores rhashtable_shrink and fixes a number of bugs in the
multiple rehashing patches (7 and 9).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch reintroduces immediate rehash during insertion. If
we find during insertion that the table is full or the chain
length exceeds a set limit (currently 16 but may be disabled
with insecure_elasticity) then we will force an immediate rehash.
The rehash will contain an expansion if the table utilisation
exceeds 75%.
If this rehash fails then the insertion will fail. Otherwise the
insertion will be reattempted in the new hash table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the ability to allocate bucket table with GFP_ATOMIC
instead of GFP_KERNEL. This is needed when we perform an immediate
rehash during insertion.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the missing bits to allow multiple rehashes. The
read-side as well as remove already handle this correctly. So it's
only the rehasher and insertion that need modification to handle
this.
Note that this patch doesn't actually enable it so for now rehashing
is still only performed by the worker thread.
This patch also disables the explicit expand/shrink interface because
the table is meant to expand and shrink automatically, and continuing
to export these interfaces unnecessarily complicates the life of the
rehasher since the rehash process is now composed of two parts.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes rhashtable_shrink to shrink to the smallest
size possible rather than halving the table. This is needed
because with multiple rehashing we will defer shrinking until
all other rehashing is done, meaning that when we do shrink
we may be able to shrink a lot.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the explicit jhash value for the hashfn parameter
of rhashtable. The default is now jhash so removing the setting
makes no difference apart from making one less copy of jhash in
the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the explicit jhash value for the hashfn parameter
of rhashtable. As the key length is a multiple of 4, this means that
we will actually end up using jhash2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since every current rhashtable user uses jhash as their hash
function, the fact that jhash is an inline function causes each
user to generate a copy of its code.
This function provides a solution to this problem by allowing
hashfn to be unset. In which case rhashtable will automatically
set it to jhash. Furthermore, if the key length is a multiple
of 4, we will switch over to jhash2.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When rht_key_hashfn is called from rhashtable itself and params
is equal to ht->p, there is no point in checking params.key_len
and falling back to ht->p.key_len.
For some reason gcc couldn't figure out that params is the same
as ht->p. So let's help it by only checking params.key_len when
it's a constant.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The walker is a lockless reader so it too needs an smp_rmb before
reading the future_tbl field in order to see any new tables that
may contain elements that we should have walked over.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Originally it was impossible to be dropping the last refcount in this
function since there was always one around still from the idr. But in
commit 83f45fc360
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Aug 6 09:10:18 2014 +0200
drm: Don't grab an fb reference for the idr
we've switched to weak references, broke that assumption but forgot to
fix it up.
Since we still force-disable planes it's only possible to hit this
when racing multiple rmfb with fbdev restoring or similar evil things.
As long as userspace is nice it's impossible to hit the BUG_ON.
But the BUG_ON would most likely be hit from fbdev code, which usually
invovles the console_lock besides all modeset locks. So very likely
we'd never get the bug reports if this was hit in the wild, hence
better be safe than sorry and backport.
Spotted by Matt Roper while reviewing other patches.
[airlied: pull this back into 4.0 - the oops happens there]
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m6GG
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-4.1-20150323' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2015-03-23
this is a pull request of 6 patches for net-next/master.
A patch by Florian Westphal, converts the skb->destructor to use
sock_efree() instead of own destructor. Ahmed S. Darwish's patch
converts the kvaser_usb driver to use unregister_candev(). A patch by
me removes a return from a void function in the m_can driver. Yegor
Yefremov contributes a patch for combined rx/tx LED trigger support. A
sparse warning in the esd_usb2 driver was fixes by Thomas Körper. Ben
Dooks converts the at91_can driver to use endian agnostic IO accessors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next.
Basically, more incremental updates for br_netfilter from Florian
Westphal, small nf_tables updates (including one fix for rb-tree
locking) and small two-liner to add extra validation for the REJECT6
target.
More specifically, they are:
1) Use the conntrack status flags from br_netfilter to know that DNAT is
happening. Patch for Florian Westphal.
2) nf_bridge->physoutdev == NULL already indicates that the traffic is
bridged, so let's get rid of the BRNF_BRIDGED flag. Also from Florian.
3) Another patch to prepare voidization of seq_printf/seq_puts/seq_putc,
from Joe Perches.
4) Consolidation of nf_tables_newtable() error path.
5) Kill nf_bridge_pad used by br_netfilter from ip_fragment(),
from Florian Westphal.
6) Access rb-tree root node inside the lock and remove unnecessary
locking from the get path (we already hold nfnl_lock there), from
Patrick McHardy.
7) You cannot use a NFT_SET_ELEM_INTERVAL_END when the set doesn't
support interval, also from Patrick.
8) Enforce IP6T_F_PROTO from ip6t_REJECT to make sure the core is
actually restricting matches to TCP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
init_module(2) passes user-specified buffer length directly to
vmalloc(). It makes warn_alloc_failed() to print out a lot of info into
dmesg if user specified insane size, like -1.
Let's silence the warning. It doesn't add much value to -ENOMEM return
code. Without the patch the syscall is prohibitive noisy for testing
with trinity.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Introduce TP_STATUS_CSUM_VALID tp_status flag to tell the
af_packet user that at least the transport header checksum
has been already validated.
For now, the flag may be set for incoming packets only.
Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is just an optimization. We don't need the value of status variable
if the packet is filtered.
Signed-off-by: Alexander Drozdov <al.drozdov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last patch reduced our interrupt-suppression region to one address,
so simplify the code somewhat.
Also, remove the obsolete undefined instruction ranges and the comment
which refers to lguest_guest.S instead of head_32.S.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
i386_head.S renamed to the head_32.S, let's update it in
the comments too.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is a proposed change to the miscdevice's behaviour on open(). Currently
file->private_data stays NULL, but only because we don't have an open-entry in
struct file_operations.
This may change so that private_data, more consistently, is always set to
struct miscdevice, not only *if* the driver has it's own open() routine and
fops-entry, see https://lkml.org/lkml/2014/12/4/939 and commit
94e4fe2cab
In short: If we rely on file->private_data being NULL, we should ensure
it is NULL ourselves.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
drm-intel-next-2015-03-13-rebased:
- EU count report param for gen9+ (Jeff McGee)
- piles of pll/wm/... fixes for chv, finally out of preliminary hw support
(Ville, Vijay)
- gen9 rps support from Akash
- more work to move towards atomic from Matt, Ander and others
- runtime pm support for skl (Damien)
- edp1.4 intermediate link clock support (Sonika)
- use frontbuffer tracking for fbc (Paulo)
- remove ilk rc6 (John Harrison)
- a bunch of smaller things and fixes all over
Includes backmerge because git rerere couldn't keep up any more.
* tag 'drm-intel-next-2015-03-13-merge' of git://anongit.freedesktop.org/drm-intel: (366 commits)
drm/i915: Make sure the primary plane is enabled before reading out the fb state
drm/i915: Update DRIVER_DATE to 20150313
drm/i915: Fix vmap_batch page iterator overrun
drm/i915: Export total subslice and EU counts
drm/i915: redefine WARN_ON_ONCE to include the condition
drm/i915/skl: Implement WaDisableHBR2
drm/i915: Remove the preliminary_hw_support shackles from CHV
drm/i915: Read CHV_PLL_DW8 from the correct offset
drm/i915: Rewrite IVB FDI bifurcation conflict checks
drm/i915: Rewrite some some of the FDI lane checks
drm/i915/skl: Enable the RPS interrupts programming
drm/i915/skl: Enabling processing of Turbo interrupts
drm/i915/skl: Updated the i915_frequency_info debugfs function
drm/i915: Simplify the way BC bifurcation state consistency is kept
drm/i915/skl: Updated the act_freq_mhz_show sysfs function
drm/i915/skl: Updated the gen9_enable_rps function
drm/i915/skl: Updated the gen6_rps_limits function
drm/i915/skl: Restructured the gen6_set_rps_thresholds function
drm/i915/skl: Updated the gen6_set_rps function
drm/i915/skl: Updated the gen6_init_rps_frequencies function
...
This patch implements support for the timeout parameter of the
Add Advertising command.
Signed-off-by: Arman Uguray <armansito@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch implements setting the Scan Response data provided as part
of an advertising instance through the Add Advertising command.
Signed-off-by: Arman Uguray <armansito@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds the most basic implementation for the
"Add Advertisement" command. All state updates between the
various HCI settings (POWERED, ADVERTISING, ADVERTISING_INSTANCE,
and LE_ENABLED) has been implemented. The command currently
supports only setting the advertising data fields, with no flags
and no scan response data.
Signed-off-by: Arman Uguray <armansito@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch introduces a new data structure to represent advertising
instances that were added using the "Add Advertising" mgmt command.
Initially an hci_dev structure will support only one of these instances
at a time, so the current instance is simply stored as a direct member
of hci_dev.
Signed-off-by: Arman Uguray <armansito@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch introduces the HCI_ADVERTISING_INSTANCE setting, which is set
when an at least one advertising instance has been added using the
"Add Advertising" mgmt command. This patch also adds a macro definition
for the EIR_APPEARANCE field type.
Signed-off-by: Arman Uguray <armansito@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds definitions for the Add Advertising and Remove
Advertising MGMT commands and events.
Signed-off-by: Arman Uguray <armansito@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Geoff Thorpe <Geoff.Thorpe@freescale.com>
Signed-off-by: Hai-Ying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
[Emil Medve: Sync with the upstream binding]
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
CONFIG_BLK_DEV_SD, SR, ... are needed for pretty much any SATA or USB
storage device (corenet32_defconfig has them) and modern any with
systemd needs the CGROUPS gunk.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
The MPIC version 2.0 has a MSI errata (errata PIC1 of mpc8544), It causes
that neither MSI nor MSI-X can work fine. This is a workaround to allow
MSI-X to function properly.
Signed-off-by: Liu Shuo <soniccat.liu@gmail.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
MPIC version is useful information for both mpic_alloc() and mpic_init().
The patch provide an API to get MPIC version for reusing the code.
Also, some other IP block may need MPIC version for their own use.
The API for external use is also provided.
This function had been previously added but was removed by commit
5e86bfde9c ("powerpc/mpic: remove unused functions") due to the
lack of a user. This function will be used by "powerpc/mpic: Add
get_version API both for internal and external use".
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
[scottwood@freescale.com: changelog update]
Signed-off-by: Scott Wood <scottwood@freescale.com>
Get the FMan devices/sub-nodes (MAC, MDIO, etc.) auto-probed
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Probably we should have not upstreamed this in the first place
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
KVM guest can fail to startup with following trace on host:
qemu-system-x86: page allocation failure: order:4, mode:0x40d0
Call Trace:
dump_stack+0x47/0x67
warn_alloc_failed+0xee/0x150
__alloc_pages_direct_compact+0x14a/0x150
__alloc_pages_nodemask+0x776/0xb80
alloc_kmem_pages+0x3a/0x110
kmalloc_order+0x13/0x50
kmemdup+0x1b/0x40
__kvm_set_memory_region+0x24a/0x9f0 [kvm]
kvm_set_ioapic+0x130/0x130 [kvm]
kvm_set_memory_region+0x21/0x40 [kvm]
kvm_vm_ioctl+0x43f/0x750 [kvm]
Failure happens when attempting to allocate pages for
'struct kvm_memslots', however it doesn't have to be
present in physically contiguous (kmalloc-ed) address
space, change allocation to kvm_kvzalloc() so that
it will be vmalloc-ed when its size is more then a page.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The /sys/kernel/mobility/migration interface was added all the way back
in 2.6.37. However, the drmgr userspace tool was never augmented to use
this interface to perfrom migrations. Instead it has continued using a
faux rtas call coupled with performing the device tree update processing
in userspace and communicating it back to the kernel via the ugly
/proc/ppc64/ofdt interface.
Up until 3.12 the device tree update code in the kernel was badly broken
and bit rotting. This code was fixed in 3.12 and is now utilized by the
kernel suspend code as of 3.15. The kernel is now better suited to
handle the post-mobility fixup of the device tree and drmgr should be
transitioned to using the sysfs migration interface.
This patch introduces the api_version sysfs file to /sys/kernel/mobility
as a means for drmgr to query the current implementation level of the
kernel migration code. This initial versioning indicates it is capable
of perfroming all current PAPR requirements for migration including the
post-mobility firmware activation and device tree update.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
