Commit graph

534,192 commits

Author SHA1 Message Date
Paulo Zanoni
cb0a08c1ed drm/i915: don't reallocate the compressed FB at every frame
With the current code we just reallocate the compressed FB at every
FBC update: we have X in one frame, then in the other frame we need X
again, but we check "needed < have" instead of "needed <= have".

v2: Rebase after Jani addressed the other problems described in v1.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 00:02:20 +01:00
Geert Uytterhoeven
d4a269373d ARM: shmobile: Enable R-Mobile reset driver in multiplatform defconfig
This is used on R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), and
SH-Mobile AG5 (sh73a0).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 08:02:17 +09:00
Paulo Zanoni
e489e38e3f drm/i915: gen5+ can have FBC with multiple pipes
So allow it.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:59:57 +01:00
Paulo Zanoni
68b92147d5 drm/i915: HSW+ FBC is tied to pipe A
So add code to consider this case.

v2: Reorder the series, so drop the possible_framebuffer_bits chunk.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:59:39 +01:00
Paulo Zanoni
9510675387 drm/i915: extract intel_fbc_find_crtc()
I want to make this code a little more complicated, so let's extract
the function first.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:59:28 +01:00
Jeff McGee
0cea6502bf drm/i915: Request full SSEU enablement on Gen9
On Gen9 the render power gating can leave slice/subslice/EU in
a partially enabled state. We must make an explicit request for
full SSEU enablement through the Render Power Clock State
register when resuming render work. This register is save/
restored in the logical ring context image for execlist
submission mode. Initialize its value in each LRC image to
request full enablement according to the device SSEU config.

Thanks to Sharma Ankitprasad and Akash Goel for highlighting the
issue and proposing the initial fix on which this patch is based.

v2: Adjusted the names of the power gating support flags to fit
    update of an earlier patch.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: "Akash Goel <akash.goel@intel.com>"
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:57:13 +01:00
Jeff McGee
7f992aba1e drm/i915/skl: Add SKL HW status to SSEU status
Add a new section to the 'i915_sseu_status' debugfs entry to
report the currently enabled counts of slice, subslice, and
execution units on the device. The count of enabled subslice
per slice represents the most enabled subslice on any one
slice for devices where imbalances may exist. Similarly, the
count of enabled EU per subslice represents the most enabled
EU on any one subslice.

Collect this device status for Skylake by reading the Gen9
power gate control ack message registers. Power gate control
operates on EU in pairs, therefore our reported counts of
enabled EU can be overestimated by one for each pair in which
one EU is fused-off.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:57:08 +01:00
Jeff McGee
3873218f35 drm/i915/skl: Determine SKL slice/subslice/EU info
Read fuse registers to determine the available slice total,
subslice total, subslice per slice, EU total, and EU per subslice
counts of the SKL device. The EU per subslice attribute is more
precisely defined as the maximum EU available on any one subslice,
since available EU counts may vary across subslices due to fusing.
Set flags indicating the SKL device's slice/subslice/EU (SSEU)
power gating capability. Make all values available via debugfs
entry 'i915_sseu_status'.

v2: Several small clean-ups suggested by Damien. Most notably,
    used smaller types for the new device info fields to reduce
    memory usage and improved the clarity/readability of the
    method used to extract attribute values from the fuse
    registers.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:56:59 +01:00
Geert Uytterhoeven
a5cb514f1f drivers: sh: Disable PM runtime for multi-platform r8a7740 with genpd
If the default PM domain using PM_CLK is used for PM runtime, the real PM
domain(s) cannot be registered from DT later.

Hence do not enable it when running a multi-platform kernel with genpd
support on an r8a7740. The R-Mobile PM domain driver will take care of
PM runtime management of the module clocks.

The default PM domain is still needed for:
  - platforms without genpd support,
  - the legacy (non-DT) case, where genpd may take over later, except
    for the C5 "always on" PM domain.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 07:26:12 +09:00
Catalin Marinas
d720d8cec5 net: compat: Ignore MSG_CMSG_COMPAT in compat_sys_{send, recv}msg
With commit a7526eb5d0 (net: Unbreak compat_sys_{send,recv}msg), the
MSG_CMSG_COMPAT flag is blocked at the compat syscall entry points,
changing the kernel compat behaviour from the one before the commit it
was trying to fix (1be374a051, net: Block MSG_CMSG_COMPAT in
send(m)msg and recv(m)msg).

On 32-bit kernels (!CONFIG_COMPAT), MSG_CMSG_COMPAT is 0 and the native
32-bit sys_sendmsg() allows flag 0x80000000 to be set (it is ignored by
the kernel). However, on a 64-bit kernel, the compat ABI is different
with commit a7526eb5d0.

This patch changes the compat_sys_{send,recv}msg behaviour to the one
prior to commit 1be374a051.

The problem was found running 32-bit LTP (sendmsg01) binary on an arm64
kernel. Arguably, LTP should not pass 0xffffffff as flags to sendmsg()
but the general rule is not to break user ABI (even when the user
behaviour is not entirely sane).

Fixes: a7526eb5d0 (net: Unbreak compat_sys_{send,recv}msg)
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 17:22:05 -05:00
Fabian Frederick
a948f8ce77 irda: replace current->state by set_current_state()
Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

current->state = TASK_RUNNING can be replaced by __set_current_state()

Thanks to Peter Zijlstra for the exact definition of the problem.

Suggested-By: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 17:21:11 -05:00
Magnus Damm
744cadba1a ARM: shmobile: No R-Car Gen2 CMA reservation when HIGHMEM=n
Allow R-Car Gen2 platforms to boot with CMA enabled
and HIGHMEM disabled. This patch adds code to check
if the R-Car Gen2 specific memory reservation window
is included in the kernel memory range or not. When
HIGHMEM is disabled the R-Car Gen2 reservation area is
outside the kernel memory range and in such case the
memory reservation is simply skipped over.

Without this patch the kernel boot hangs when CMA is
enabled and HIGHMEM is disabled on the r8a7791 Koelsch
hardware platform:

    WARNING: CPU: 1 PID: 1 at mm/cma.c:113 cma_init_reserved_areas+0x88/0x1d4()
    ...
    WARNING: CPU: 1 PID: 1 at mm/cma.c:121 cma_init_reserved_areas+0xf8/0x1d4()
    ...
    Unable to handle kernel NULL pointer dereference at virtual address 00000160
    pgd = c0003000
    [00000160] *pgd=80000040004003, *pmd=00000000
    Internal error: Oops: 206 [#1] SMP ARM
    Modules linked in:
    CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W
3.19.0-rc4-koelsch-01450-g7f9b6075ce12c3ea-dirty #735
    Hardware name: Generic R8A7791 (Flattened Device Tree)
    task: edc553c0 ti: edc56000 task.ti: edc56000
    PC is at set_pfnblock_flags_mask+0x54/0xa0
    LR is at 0x440

In the current shmobile_defconfig HIGHMEM is enabled
while CMA is disabled, so to trigger this the kernel
configuration for both CMA and HIGHMEM needs to be
adjusted.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 07:13:54 +09:00
Stephen Boyd
fd9454ab51 ARM: shmobile: r8a7779: Remove redundant cpu_disable implementation
By default only the non-boot CPUs can be hotplugged if the
smp_operations structure doesn't have the cpu_disable function
pointer set. r8a7779_cpu_disable() implements the same logic,
only non-boot CPUs can be hotplugged, so it's redundant to
override the default behavior.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 07:12:16 +09:00
Magnus Damm
bb04883b25 ARM: shmobile: Remove mach/uncompress.h
Convert ARCH_SHMOBILE_LEGACY to make use of <debug/uncompress.h>
and remove the now unused <mach/uncompress.h>.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 07:12:16 +09:00
Magnus Damm
814979eb84 ARM: shmobile: Remove mach/clkdev.h
Move over ARCH_SHMOBILE_LEGACY to use the default legacy ARM
implementations of __clk_get() and __clk_put() in <asm/clkdev.h>
by deselecting HAVE_MACH_CLKDEV. This has the nice side effect
that <mach/clkdev.h> is no longer used and can be removed.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 07:12:15 +09:00
Magnus Damm
4fa9c6e24b ARM: shmobile: Remove mach/system.h
The file <mach/system.h> is no longer included from anywhere so
clean up the code by removing mach-shmobile/include/mach/system.h

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 07:12:15 +09:00
Davidlohr Bueso
5b28255278 audit: reduce mmap_sem hold for mm->exe_file
The mm->exe_file is currently serialized with mmap_sem (shared)
in order to both safely (1) read the file and (2) audit it via
audit_log_d_path(). Good users will, on the other hand, make use
of the more standard get_mm_exe_file(), requiring only holding
the mmap_sem to read the value, and relying on reference counting
to make sure that the exe file won't dissapear underneath us.

Additionally, upon NULL return of get_mm_exe_file, we also call
audit_log_format(ab, " exe=(null)").

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
[PM: tweaked subject line]
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-02-23 16:57:00 -05:00
Davidlohr Bueso
4766b199ef audit: consolidate handling of mm->exe_file
This patch adds a audit_log_d_path_exe() helper function
to share how we handle auditing of the exe_file's path.
Used by both audit and auditsc. No functionality is changed.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
[PM: tweaked subject line]
Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-02-23 16:55:47 -05:00
Chuck Lever
9b1dcbc8cf xprtrdma: Store RDMA credits in unsigned variables
Dan Carpenter's static checker pointed out:

   net/sunrpc/xprtrdma/rpc_rdma.c:879 rpcrdma_reply_handler()
   warn: can 'credits' be negative?

"credits" is defined as an int. The credits value comes from the
server as a 32-bit unsigned integer.

A malicious or broken server can plant a large unsigned integer in
that field which would result in an underflow in the following
logic, potentially triggering a deadlock of the mount point by
blocking the client from issuing more RPC requests.

net/sunrpc/xprtrdma/rpc_rdma.c:

  876          credits = be32_to_cpu(headerp->rm_credit);
  877          if (credits == 0)
  878                  credits = 1;    /* don't deadlock */
  879          else if (credits > r_xprt->rx_buf.rb_max_requests)
  880                  credits = r_xprt->rx_buf.rb_max_requests;
  881
  882          cwnd = xprt->cwnd;
  883          xprt->cwnd = credits << RPC_CWNDSHIFT;
  884          if (xprt->cwnd > cwnd)
  885                  xprt_release_rqst_cong(rqst->rq_task);

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: eba8ff660b ("xprtrdma: Move credit update to RPC . . .")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-02-23 16:54:04 -05:00
Magnus Damm
c6535e1e03 Documentation: Remove ZBOOT MMC/SDHI utility and docs
Remove ZBOOT MMC/SDHI Documentation for sh7372 together
wit the vrl4 utility. Without sh7372 and Mackerel support
these files are no longer useful.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:25 +09:00
Magnus Damm
edf4100906 ARM: shmobile: sh7372 dtsi: Remove Legacy DTSI file
Remove the sh7372 DTSI file for the now unsupported sh7372 SoC.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:25 +09:00
Magnus Damm
1da64fe65a ARM: shmobile: sh7372: Remove DT binding documentation
Remove DT compatible string documentation for the now removed sh7372 SoC.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:25 +09:00
Magnus Damm
59b89af1d5 ARM: shmobile: sh7372: Remove Legacy C SoC code
Remove support for the legacy Cortex-A8 based sh7372 SoC.

The Linux kernel still lacks DT bindings for the sh7372 INTC
interrupt controller so DT multiplatform support is not possibile.

Also, the sh7372 SoC never went into mass production anyway so to
aid migration to DT multiplatform simply get rid of sh7372 support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:25 +09:00
Magnus Damm
10c7fcbd0f ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support
Remove the sh7372 implementation and the shared ZBOOT MMC
and SDHI support code from the compressed ARM boot loader.

With this in place it is no longer possible to boot any
self-contained kernel for sh7372 directly from Mask ROM
via SDHI and MMCIF hardware.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:24 +09:00
Magnus Damm
d1e068fd24 ARM: shmobile: mackerel: Remove from MAINTAINERS
Remove the mackerel_defconfig from the MAINTAINERS file.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:24 +09:00
Magnus Damm
2ed4ea34f5 ARM: shmobile: mackerel: Remove defconfig
Remove the defconfig for the no longer supported mackerel board.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:16 +09:00
Magnus Damm
34dc938f4d ARM: shmobile: mackerel: Remove mach-type entry
Remove the mackerel entry from the mach-types file.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:16 +09:00
Magnus Damm
1da7d6f424 ARM: shmobile: mackerel: Remove DT binding documentation
Remove the DT compatible string documentation for the
no longer supported Mackerel board.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:16 +09:00
Magnus Damm
c1b7506b52 ARM: shmobile: mackerel dts: Remove Legacy DTS file
Remove the DTS file for the no longer supported Mackerel board.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:16 +09:00
Magnus Damm
a521422ea4 ARM: shmobile: mackerel: Remove Legacy C board code
Remove legacy C code for the sh7372 Mackerel board. There is no
DT multiplatform implementation available for the sh7372 SoC so
simply phase out the board and SoC code support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:11 +09:00
Magnus Damm
040d64d6e0 ARM: shmobile: mackerel: Remove ZBOOT code
Remove ZBOOT support code for Mackerel. With this patch in place
it is no longer possible to boot a self-contained kernel directly
from the reset vector. ZBOOT is still supported on kzm9g.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:43:58 +09:00
Jamal Hadi Salim
30ff547659 net: sched: export tc_connmark.h so it is uapi accessible
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 16:41:08 -05:00
Ulrich Hecht
d4578204e7 ARM: shmobile: r8a7778 dtsi: Add Bus State Controller node
Add a node for the Bus State Controller (BSC) on r8a7778, to which
multiple external devices can be connected.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:49 +09:00
Robert Jarzmik
d6cf30ca71 ARM: pxa: fix pxa interrupts handling in DT
The commit "ARM: pxa: arbitrarily set first interrupt number" changed
the first pxa interrupt to 16.

As a consequence, device-tree builds got broken, because :
 - pxa_mask_irq() and pxa_unmask_irq() are using IRQ_BIT()
 - IRQ_BIT(x) calculates the interrupts as : x - PXA_IRQ(0)

Before the commit, the first interrupt shift, PXA_IRQ(0) was 0,
therefore IRQ_BIT(x) was x. After the change, it is necessary that the
same shift of 16 is applied between the virtual interrupt number and the
hardware irq number.

This situation comes from the common irq_chip shared between legacy
platform builds and device-tree builds.

Fix the broken interrupts in DT case by adding this shift in the DT case
too.

As a consequence of the IRQ_BIT() is removed alltogether from interrupts
handling, even in the platform data types of platforms :
 - a legacy irq domain is used
 - the irq_chip handles hardware interrupts
 - the virtual to hardware interrupt conversion is fully handled by irq
   domain mechanics

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-02-23 22:40:48 +01:00
Ulrich Hecht
1898fe1952 ARM: shmobile: bockw: add USB, VIN pin descriptions to DT
Adds pin control info for USB host and video-in devices.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:48 +09:00
Ulrich Hecht
05cabb839e ARM: shmobile: r8a7778: add internal ethernet controller to DT
Internal Ethernet controller DT entry with clock information.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:47 +09:00
Ulrich Hecht
66462be7c6 ARM: shmobile: r8a7778: add MSTP clock assignments to DT
Assigns clocks to i2c*, tmu*, scif*, mmcif, sdhi*, and hspi*.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:47 +09:00
Ulrich Hecht
43cbec8577 ARM: shmobile: r8a7778: implement SoC and board CCF support
Disables the legacy clock framework and passes the mode bits to the CPG
driver if CCF is enabled.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:46 +09:00
Ulrich Hecht
93aa970d2b ARM: shmobile: r8a7778: Common clock framework DT description
Declares all r8a7778 clocks supported by the legacy clock framework,
plus tmu2.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
[horms: only included dtsi changes]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:45 +09:00
Ulrich Hecht
83054671d2 ARM: shmobile: r8a7778: add CPG register bits header
Enumerates CPG driver custom clocks and MSTP clock enable bits.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:44 +09:00
Ulrich Hecht
8c4892a633 ARM: shmobile: r8a7778: synchronize dts with reference platform
This moves everything to the legacy dts that is missing there to make it
suitable for use with multiplatform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:40:44 +09:00
Masanari Iida
5c0c75d33d ARM: pxa: Fix typo in zeus.c
This patch fix a typo in struct platform_device can_regulator_device.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2015-02-23 22:40:09 +01:00
Geert Uytterhoeven
12920b02c0 PM / Domains: R-Mobile SYSC: Document R-Mobile APE6 (r8a73a4) binding
R-Mobile APE6 (r8a73a4) is handled fine by the same driver and bindings.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:38:27 +09:00
Geert Uytterhoeven
d1e21e3f57 ARM: shmobile: ape6evm dts: Drop console= bootargs parameter
Since ("ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform"),
ape6evm is restricted to booting from DT, so chosen/stdout-path is
always used, and we can drop the "console=" parameter from
chosen/bootargs.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:38:27 +09:00
Simon Horman
9d07d414d4 ARM: shmobile: r8a73a4: ape6evm: Remove legacy platform
This removes the remains of the legacy ape6evm platform.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:38:14 +09:00
Ulrich Hecht
8ba1f188d6 ARM: shmobile: ape6evm-reference: Remove board C code and DT file
Now that the r8a73a4 generic multiplatform case has the same features as the
APE6EVM DT reference board code, we get rid of the latter.  DT reference
code in the future shall make use of the r8a73a4 multiplatform support code
with the generic SoC machine vector.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[geert: Update Documentation/devicetree/bindings/arm/shmobile.txt]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:50 +09:00
Geert Uytterhoeven
e4ba0a9bdd ARM: shmobile: r8a73a4: Move pfc node to work around probe ordering bug
Currently the pin function controller (which is also a GPIO controller)
is instantiated before the interrupt controllers due to the order in the
DTS. At that time, the irq domains for the interrupt controllers
referenced by its interrupts-extended property cannot be found yet:

    irq: no irq domain found for /interrupt-controller@e61c0000 !

Nevertheless, the core OF probing code ignores this failure, besides a
debug message that's not normally printed:

    not all legacy IRQ resources mapped for pfc

and continues initialization of the device. Then, the sh-pfc driver
cannot find any IRQ resources, and thinks no interrupts are available,
causing gpio-keys to fail later:

    gpio-keys keyboard: Unable to claim irq 0; error -22
    gpio-keys: probe of keyboard failed with error -22

Move the pin function controller node after the interrupt controller
nodes it references to work around the bug in the core OF probing code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:49 +09:00
Geert Uytterhoeven
a656c60388 ARM: shmobile: ape6evm dts: Move Ethernet node to BSC
Move the Ethernet node from the ad-hoc lbsc node to the BSC node,
as its connected to the Bus State Controller.  This allows the system to
know the right position of the Ethernet node in the clock and PM domain
hierarchy, and manage the clock and PM domain appropriately.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:49 +09:00
Geert Uytterhoeven
271b3ad261 ARM: shmobile: r8a73a4 dtsi: Add Bus State Controller node
Add a node for the Bus State Controller (BSC) on r8a73a4, to which
multiple external devices can be connected.

The BSC is driven by the ZB clock, and located in PM domain C4.
A reference to the latter will be added later.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:48 +09:00
Ulrich Hecht
662dd64ff0 ARM: shmobile: r8a73a4: Add MSTP clock assignments to DT
Assigns clocks to dmac, i2c*, cmt1, thermal, scif*, sdhi*, and mmcif*.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:37:47 +09:00