In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is
allocated via kzalloc(). If the subsequent allocation for inst->codec_info
fails, the functions return -ENOMEM without freeing the previously
allocated instance, causing a memory leak.
Fix this by calling kfree() on the instance in this error path to ensure
it is properly released.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The current decoding method was to wait until each frame was
decoded after feeding a bitstream. As a result, performance was low
and Wave5 could not achieve max pixel processing rate.
Update driver to use an asynchronous approach for decoding and feeding a
bitstream in order to achieve full capabilities of the device.
WAVE5 supports command-queueing to maximize performance by pipelining
internal commands and by hiding wait cycle taken to receive a command
from Host processor.
Instead of waiting for each command to be executed before sending the
next command, Host processor just places all the commands in the
command-queue and goes on doing other things while the commands in the
queue are processed by VPU.
While Host processor handles its own tasks, it can receive VPU interrupt
request (IRQ).
In this case, host processor can simply exit interrupt service routine
(ISR) without accessing to host interface to read the result of the
command reported by VPU.
After host processor completed its tasks, host processor can read the
command result when host processor needs the reports and does
response processing.
To achieve this goal, the device_run() calls v4l2_m2m_job_finish
so that next command can be sent to VPU continuously, if there is
any result, then irq is triggered and gets decoded frames and returns
them to upper layer.
Theses processes work independently each other without waiting
a decoded frame.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The dec_output_info should not be a null pointer, WARN_ON around it to
indicates a driver issue.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When multi instances are created/destroyed, many interrupts happens
and structures for decoder are removed.
"struct vpu_instance" this structure is shared for all flow in the decoder,
so if the structure is not protected by lock, Null dereference
could happens sometimes.
IRQ Handler was spilt to two phases and Lock was added as well.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Move video device unregistration to the beginning of the remove function
to ensure all video operations are stopped before cleaning up the worker
thread and disabling PM runtime. This prevents hardware register access
after the device has been powered down.
In polling mode, the hrtimer periodically triggers
wave5_vpu_timer_callback() which queues work to the kthread worker.
The worker executes wave5_vpu_irq_work_fn() which reads hardware
registers via wave5_vdi_read_register().
The original cleanup order disabled PM runtime and powered down hardware
before unregistering video devices. When autosuspend triggers and powers
off the hardware, the video devices are still registered and the worker
thread can still be triggered by the hrtimer, causing it to attempt
reading registers from powered-off hardware. This results in a bus error
(synchronous external abort) and kernel panic.
This causes random kernel panics during encoding operations:
Internal error: synchronous external abort: 0000000096000010
[#1] PREEMPT SMP
Modules linked in: wave5 rpmsg_ctrl rpmsg_char ...
CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread
Tainted: G M W
pc : wave5_vdi_read_register+0x10/0x38 [wave5]
lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5]
Call trace:
wave5_vdi_read_register+0x10/0x38 [wave5]
kthread_worker_fn+0xd8/0x238
kthread+0x104/0x120
ret_from_fork+0x10/0x20
Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: synchronous external abort:
Fatal exception
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings
during module removal. Cancel the hrtimer before destroying the kthread
worker to ensure work queues are empty.
In polling mode, the driver uses hrtimer to periodically trigger
wave5_vpu_timer_callback() which queues work via kthread_queue_work().
The kthread_destroy_worker() function validates that both work queues
are empty with WARN_ON(!list_empty(&worker->work_list)) and
WARN_ON(!list_empty(&worker->delayed_work_list)).
The original code called kthread_destroy_worker() before hrtimer_cancel(),
creating a race condition where the timer could fire during worker
destruction and queue new work, triggering the WARN_ON.
This causes the following warning on every module unload in polling mode:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1034 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
Modules linked in: wave5(-) rpmsg_ctrl rpmsg_char ...
Call trace:
kthread_destroy_worker+0x84/0x98
wave5_vpu_remove+0xc8/0xe0 [wave5]
platform_remove+0x30/0x58
...
---[ end trace 0000000000000000 ]---
Fixes: ed7276ed2f ("media: chips-media: wave5: Add hrtimer based polling support")
Cc: stable@vger.kernel.org
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in
the remove path to properly pair with pm_runtime_use_autosuspend() from
probe. This allows pm_runtime_disable() to handle reference count cleanup
correctly regardless of current suspend state.
The driver calls pm_runtime_put_sync() unconditionally in remove, but the
device may already be suspended due to autosuspend configured in probe.
When autosuspend has already suspended the device, the usage count is 0,
and pm_runtime_put_sync() decrements it to -1.
This causes the following warning on module unload:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
...
vdec 30210000.video-codec: Runtime PM usage count underflow!
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
CMD_STOP being sent to encoder before last job is executed by device_run
can lead to an occasional dropped frame. Ensure that remaining ready
buffers are drained by making a call to v4l2_m2m_try_schedule.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When STREAMON(CAP) is called after STREAMON(OUT), the driver was failing to
switch states from VPU_INST_STATE_OPEN to VPU_INST_STATE_INIT_SEQ and
VPU_INST_STATE_PIC_RUN because the capture queue streaming boolean had not
yet been set to true. This led to a hang in the encoder since the state
was stuck in VPU_INST_STATE_OPEN. During the second call to
start_streaming, the sequence initialization and frame buffer allocation
should occur.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for optional allocation of bitstream descriptors from SRAM
instead of DRAM. In case the encoder/decoder DT node contains 'sram'
property which points to 'mmio-sram', the driver will attempt to use
the SRAM instead of DRAM for descriptor allocation, which might improve
performance.
This also helps on i.MX95 rev.A with sporadic SLOTn_STATUS IMG_RD_ERR
bit 11 being triggered during JPEG encoding, which is caused by a bug
fixed on later SoC revisions. The bug occurs less often when using the
SRAM for descriptor storage, but is not entirely mitigated. The following
pipeline triggers the bug when descriptors get allocated from DRAM, the
pipeline often hangs after a few seconds and the encoder driver indicates
"timeout, cancel it":
gst-launch-1.0 videotestsrc ! \
video/x-raw,width=256,height=256,format=YUY2 ! \
queue ! v4l2jpegenc ! queue ! fakesink
Tested-by: Ming Qian <ming.qian@oss.nxp.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Document optional phandle to mmio-sram, which can describe an SRAM
region used for descriptor storage instead of regular DRAM region.
Use of SRAM instead of DRAM for descriptor storage may improve bus
access pattern and performance.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In mtk_mdp_probe(), vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put()
to prevent reference leak.
Fixes: c8eb2d7e82 ("[media] media: Add Mediatek MDP Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent
resource leak.
Add check for the return value of vpu_get_plat_device() to prevent null
pointer dereference. And vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put() to
prevent reference leak.
Fixes: c8eb2d7e82 ("[media] media: Add Mediatek MDP Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a comment to the vpu_get_plat_device() documentation to make it
clear that the VPU platform device is returned with an incremented
reference count (which needs to be dropped after use).
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Based on testing and recommendations by David Lechner et al. [1][2],
using = { } to initialize a structure or array is the preferred way
to do this in the kernel.
Converts memset() to = { }, thereby:
- Eliminating the risk of sizeof() mismatches.
- Simplifying the code.
[1]: https://lore.kernel.org/linux-iio/202505090942.48EBF01B@keescook/
[2]: https://lore.kernel.org/lkml/20250614151844.50524610@jic23-huawei/
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
UNINIT checker finds some instances of variables that are used
without being initialized, for example using the uninitialized
value enc_result.is_key_frm can result in unpredictable behavior,
so initialize these variables after declaring.
Fixes: 4e855a6efa ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If prev->input != PREVIEW_INPUT_MEMORY the width and height weren't
clamped. Just always clamp.
This fixes a v4l2-compliance error:
fail: v4l2-test-subdevs.cpp(171): fse.max_width == ~0U || fse.max_height == ~0U
fail: v4l2-test-subdevs.cpp(270): ret && ret != ENOTTY
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
If ccp2->input == CCP2_INPUT_NONE, then try_format didn't clamp
the width and height. This can happen with v4l2-compliance tests.
Always clamp.
This fixes this v4l2-compliance error:
fail: v4l2-test-subdevs.cpp(171): fse.max_width == ~0U || fse.max_height == ~0U
fail: v4l2-test-subdevs.cpp(270): ret && ret != ENOTTY
test Try VIDIOC_SUBDEV_ENUM_MBUS_CODE/FRAME_SIZE/FRAME_INTERVAL: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The preview subdev device was missing V4L2_SUBDEV_FL_HAS_EVENTS,
and that prevented VIDIOC_SUBSCRIBE_EVENT from working.
Fixes a v4l2-compliance error:
fail: v4l2-test-controls.cpp(1128): subscribe event for control 'User Controls' failed
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fix various v4l2-compliance errors relating to timeperframe.
VIDIOC_G/S_PARM is only supported for Video Output, so disable
these ioctls for Capture devices.
Ensure numerator and denominator are never 0.
Set missing V4L2_CAP_TIMEPERFRAME capability for VIDIOC_S_PARM.
v4l2-compliance:
fail: v4l2-test-formats.cpp(1388): out->timeperframe.numerator == 0 || out->timeperframe.denominator == 0
test VIDIOC_G/S_PARM: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add missing ioctls. This makes v4l2-compliance happier:
warn: v4l2-test-buffers.cpp(813): VIDIOC_CREATE_BUFS not supported
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
isp_video_set_format now calls isp_video_try_format first, ensuring
consistent behavior and removing duplicate code in both functions.
This fixes an v4l2-compliance error:
fail: v4l2-test-formats.cpp(519): !pix.sizeimage
test VIDIOC_S_FMT: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Initialize the v4l2_format to a default. Empty formats are
not allowed in V4L2, so this fixes v4l2-compliance issues:
fail: v4l2-test-formats.cpp(514): !pix.width || !pix.height
test VIDIOC_G_FMT: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
JPEG colorspace should generally not be used unless it is actually
dealing with JPG data. This fixes v4l2-compliance errors:
fail: v4l2-test-formats.cpp(416): pixelformat != V4L2_PIX_FMT_JPEG && pixelformat != V4L2_PIX_FMT_MJPEG && colorspace == V4L2_COLORSPACE_JPEG
fail: v4l2-test-formats.cpp(521): testColorspace(!node->is_io_mc, pix.pixelformat, pix.colorspace, pix.ycbcr_enc, pix.quantization)
test VIDIOC_TRY_FMT: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add missing ioctls. This makes v4l2-compliance happier:
fail: v4l2-test-formats.cpp(516): pixelformat 59565955 (UYVY) for buftype 1 not reported by ENUM_FMT
test VIDIOC_G_FMT: FAIL
fail: v4l2-test-formats.cpp(516): pixelformat 59565955 (UYVY) for buftype 1 not reported by ENUM_FMT
test VIDIOC_TRY_FMT: FAIL
fail: v4l2-test-formats.cpp(516): pixelformat 56595559 (YUYV) for buftype 1 not reported by ENUM_FMT
test VIDIOC_S_FMT: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
The isp_video_mbus_to_pix/pix_to_mbus functions did not take
the last empty entry { 0, } of the formats array into account.
As a result, isp_video_mbus_to_pix would accept code 0 and
isp_video_pix_to_mbus would select code 0 if no match was found.
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Since this is a media-centric device set the V4L2_CAP_IO_MC
capability. Also don't set bus_info, leave that to the v4l2 core.
This fixes v4l2-compliance errors:
test MC information (see 'Media Driver Info' above): OK
fail: v4l2-compliance.cpp(661): missing bus_info prefix ('media')
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
For the various subdevices, set the function field.
This fixes v4l2-compliance errors:
$ v4l2-compliance -M0
v4l2-compliance 1.33.0-5410, 32 bits, 64-bit time_t
v4l2-compliance SHA: c12c89c5bd70 2025-10-05 09:58:42
Compliance test for omap3isp device /dev/media0:
Media Driver Info:
Driver name : omap3isp
Model : TI OMAP3 ISP
Serial :
Bus info : platform:480bc000.isp
Media version : 6.17.0
Hardware revision: 0x000000f0 (240)
Driver version : 6.17.0
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/media0 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
fail: v4l2-test-media.cpp(108): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
fail: v4l2-test-media.cpp(196): checkFunction(ent.function, true)
test MEDIA_IOC_G_TOPOLOGY: FAIL
fail: v4l2-test-media.cpp(398): num_data_links != num_links
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
test MEDIA_IOC_SETUP_LINK: OK
Total for omap3isp device /dev/media0: 8, Succeeded: 6, Failed: 2, Warnings: 0
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
resctrl assumes that monitor events can only be read from a CPU in the
cpumask_t set of each domain. This is true for x86 events accessed with an
MSR interface, but may not be true for other access methods such as MMIO.
Introduce and use flag mon_evt::any_cpu, settable by architecture, that
indicates there are no restrictions on which CPU can read that event. This
flag is not supported by the L3 event reading that requires to be run on a CPU
that belongs to the L3 domain of the event being read.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
As 'AMD Documentation Hub' [1] announced: "All technical documentation,
including for AMD EPYC™ processors ..., and more is now hosted on the
AMD Technical Information Portal (TIP) [2]".
By searching the No.55898, update the new URL.
[1] https://www.amd.com/en/search/documentation/hub.html
[2] https://docs.amd.com/
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20251230133101.14362-1-haiyuewa@163.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix a typo in the manual fan control description ("aproximate" ->
"approximate").
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20251230213431.656106-1-weibu@redadmin.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reading monitoring event data from MMIO requires more context than the event id
to be able to read the correct memory location. struct mon_evt is the appropriate
place for this event specific context.
Prepare for addition of extra fields to struct mon_evt by changing the calling
conventions to pass a pointer to the mon_evt structure instead of just the
event id.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/20251217172121.12030-1-tony.luck@intel.com
Add TDP data for laptop model GA403UV.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260103003731.404383-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
As some GA403U may have different limits restrict the DMI match to the
specific GA403UI model.
Fixes: 39ae6c50e5 ("platform/x86: asus-armoury: add ppt_* and nv_* tuning knobs")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260103003731.404383-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model GA403WM.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260103003731.404383-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This watchdog can't be used with Linux because the firmware needs it on
R-Car V3H boards. Sadly, it doesn't mark the node as reserved, so this
is added manually here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251215031318.2219-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/V2N SoC includes a Thermal Sensor Unit (TSU) block designed
to measure the junction temperature. The device provides real-time
temperature measurements for thermal management, utilizing two dedicated
channels for temperature sensing:
- TSU0, which is located near the DRP-AI block
- TSU1, which is located near the CPU and DRP-AI block
Since TSU1 is physically closer the CPU and the highest temperature
spot, it is used for CPU throttling through a passive trip and cooling
map. TSU0 is configured only with a critical trip.
Add TSU nodes along with thermal zones and keep them enabled in the SoC
DTSI.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251209091115.8541-4-ovidiu.panait.rb@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/N2H (R9A09G087) SoC has three instances of the DMAC IP.
Add support for them.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251205151254.2970669-7-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
