The Renesas RZ/T2H (R9A09G077) SoC has three instances of the DMAC IP.
Add support for them.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251205151254.2970669-6-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/N2H (R9A09G087) SoC has an Interrupt Controller (ICU)
block that routes external interrupts to the GIC's SPIs, with the
ability of level-translation, and can also produce software and
aggregate error interrupts.
Add support for it.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251201112933.488801-5-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/T2H (R9A09G077) SoC has an Interrupt Controller (ICU)
block that routes external interrupts to the GIC's SPIs, with the
ability of level-translation, and can also produce software and
aggregate error interrupts.
Add support for it.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251201112933.488801-4-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
SMARC2 board dtsi is common for multiple SoCs. So Move aliases
to board DTS as SoC may have different IPs for a given alias.
eg: RZ/G3S does not have RSCI interface.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251129185203.380002-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the NMI connected user pushbutton on the RZ/V2N EVK.
The button is wired to the SoC NMI input and can be used to wake the
system from low-power states.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251125224533.294235-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add node for the Interrupt Control Unit IP found on the Renesas
RZ/V2N SoC, and modify the pinctrl node as its interrupt parent
is the ICU node.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251125224533.294235-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the four SPI controllers on the Renesas RZ/N2H Soc.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251119161434.595677-14-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the four SPI controllers on the Renesas RZ/T2H Soc.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251119161434.595677-13-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the USB3.0 (CH0) host controllers on the RZ/V2N Evaluation Kit.
The CN4 connector on the EVK provides access to the USB3.0 channel.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251119110505.100253-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the USB3.0 (CH0) and USB3.1 (CH1) host controllers on the RZ/V2H
Evaluation Kit. The CN4 stacked connector on the EVK provides access to
both channels, with CH0 corresponding to USB3.0 and CH1 to USB3.1.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251119110505.100253-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
1.8V operation of SD1 requires the jumper to be placed on the correct
pins of a connector on these Evaluation Kits. 1.8V is needed to achieve
the higher rated speeds like SDR104. Add a note about it to make sure no
one else spends too much time figuring this out.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251022073141.1989762-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Get rid of the superfluous braces and silent checkpatch complaint:
WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-6-6b0b76cbbb64@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Get rid of the unnecessary branch to address checkpatch complaint:
WARNING: else is not generally useful after a break or return
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-5-6b0b76cbbb64@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simplify error handling in nau8821_enable_jack_detect() by removing the
unnecessary return after logging the request irq message.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-4-6b0b76cbbb64@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A jack detection work that is unscheduled or in progress while executing
the suspend handler could trigger a race condition.
Ensure state consistency by cancelling any pending work or wait for its
execution to complete before processing the suspend. Since driver
(re)enables both insert and eject interrupts on resume, there is no risk
to miss the related jack events. Therefore, flush_delayed_work() is not
required here.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Fixes: ee70bacef1 ("ASoC: nau8821: Avoid unnecessary blocking in IRQ handler")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-3-6b0b76cbbb64@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The nau8821_enable_jack_detect() function was supposed to allow enabling
or disabling jack events reporting. However, once enabled, any
subsequent invocation would fail and the following splat is shown:
[ 3136.996771] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024
[ 3136.996773] Workqueue: events_unbound deferred_probe_work_func
[ 3136.996780] Call Trace:
[ 3136.996782] <TASK>
[ 3136.996787] dump_stack_lvl+0x6e/0xa0
[ 3136.996796] __setup_irq.cold+0x9c/0xce
[ 3136.996803] ? __pfx_irq_default_primary_handler+0x10/0x10
[ 3136.996812] ? __pfx_nau8821_interrupt+0x10/0x10 [snd_soc_nau8821]
[ 3136.996825] request_threaded_irq+0xd9/0x160
[ 3136.996853] devm_request_threaded_irq+0x71/0xd0
[ 3136.996859] ? __pfx_nau8821_interrupt+0x10/0x10 [snd_soc_nau8821]
[ 3136.996882] nau8821_enable_jack_detect+0xa5/0xc0 [snd_soc_nau8821]
[ 3136.996901] acp5x_8821_init+0x8d/0xa0 [snd_soc_acp5x_mach]
[ 3136.996917] snd_soc_link_init+0x25/0x50 [snd_soc_core]
[ 3136.996958] snd_soc_bind_card+0x615/0xd00 [snd_soc_core]
[ 3136.997026] snd_soc_register_card+0x1b2/0x1c0 [snd_soc_core]
[ 3136.997064] devm_snd_soc_register_card+0x47/0x90 [snd_soc_core]
[ 3136.997108] acp5x_probe+0x72/0xb0 [snd_soc_acp5x_mach]
[...]
[ 3136.997508] nau8821 i2c-NVTN2020:00: Cannot request irq 58 (-16)
Introduce jdet_active flag to driver data structure and use it to
provide one-time initialization of the jack detection work queue and
related interrupt line.
Note this is also a prerequisite for additional fixes around module
unloading and suspend handling.
Fixes: aab1ad11d6 ("ASoC: nau8821: new driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-1-6b0b76cbbb64@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAPM routes for "Left Line Mux" and "Right Line Mux" are defined
twice in es8328_dapm_routes[]. The redundant entries appear after
the "Mic Bias" route and duplicate the definitions found earlier in
the array.
Remove the duplicate entries to clean up the code.
Tested on Rockchip RK3588 with ES8328 codec. Verified that removing
the duplicate routes does not alter the DAPM graph or the mixer
controls. Both 'tinymix' output and DAPM widget lists remain
identical to the baseline.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20251231084554.265916-1-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ALC5575 integrates an audio DSP that typically loads its firmware
from an external flash via its own SPI host interface. In certain
hardware configurations, the firmware can alternatively be loaded
through the SPI client interface. The driver provides basic mute and
volume control functions. When the SPI client interface is enabled,
firmware loading is handled by the SPI driver.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/17c36d07af44ffb1d600977955da95852f8d60f3.1767148150.git.oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the helper of_find_spi_controller_by_node() is gated under
CONFIG_OF_DYNAMIC. This prevents drivers from using it in all CONFIG_OF
configurations.
This patch moves the gating to CONFIG_OF, keeping the inline fallback
returning NULL when Device Tree support is disabled.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://patch.msgid.link/6d8ae977d9f4726ea23ad5382638750593f9a2e4.1767148150.git.oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices are primarily described on another bus (e.g. I2C) but also
have an additional SPI connection that serves as a transport for
firmware loading. Export of_find_spi_controller_by_node() so drivers can
obtain the SPI controller referenced by a DT phandle.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/0e572a00aa305e588357162d400ba9472ce56dd3.1767148150.git.oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To ensure better performance of the codec, different configurations
will be employed based on power supply conditions.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20260105091548.4196-6-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add test cases for using the new long-offset block types to patch
memory that is >0xffff from the algorithm base.
This is just adding entries to the parameter data that have larger
offset values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Run the patch block test cases using the new long-offset block type.
This adds a new set of parameterization that uses
cs_dsp_mock_bin_add_patch_off32() to create the patch blocks in the
test bin file.
The test cases for Halo Core with V3 file format include another
run of the tests with the new parameterization, so that the tests
are run on the standard blocks and the long-offset blocks.
This commit does not add any new cases for offsets > 0xffff.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251231172711.450024-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
