Prepare to add more callbacks in mipi_i3c_hci_pci_info. Change ->init()
callback parameter from PCI device pointer to mipi_i3c_hci_pci_info device
pointer.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Allocate a structure for mipi_i3c_hci_pci device information, in
preparation for additional changes that need to store mipi_i3c_hci_pci
device-specific information.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
For neatness, factor out private registers ioremapping.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add const qualifier to driver data because it is constant.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use readl_poll_timeout() instead of open-coding the polling loop.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Rename some Intel-related identifiers to ensure Intel-related identifiers
begin "intel_" or INTEL_, and for brevity removing purposeless "PRIV" in
preparation to add more register definitions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move all Intel-related definitions together, to tidy the code slightly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
All Intel controllers support 64-bit DMA. Set the DMA mask accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251128064038.55158-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code.
_ Properly handle SRCU readers within IRQ disabled sections in tiny SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture.
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write side
(using full RCU grace period ordering instead of simply full
ordering) as compared to "traditional" non-fast SRCU. But those
srcu-fast flavours are going to be optimized in two different
ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next cycle.
Only the new interfaces are added for now, along with related
torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering) without
waiting for the read side to tell which to use. Also this optimizes
the read side altogether with moving flavour debug checks to debug
config and with removing a costly RmW operation on their first call.
- Make some diagnostic functions tracing safe.
A disappointingly large set of device specific fixes that have built up
since I've been a bit tardy with sending a pull requests as people kept
sending me new new fixes. The bcm63xx and lpspi issues could lead to
corruption so the fixes are fairly important for the affected parts, the
other issues should all be relatively minor.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkqFaIACgkQJNaLcl1U
h9Cx4Af+N+WonkDRzn5iOEzu4dOFz4idB0mV2LkFwWgKaTXZ2G0YKwJqvWE9Yw1Z
bxOYOmJYaZAms4qOPJJVbPm38NrkjEnRdca9+zBsyu3nuvo8QLCefgLbzgwfUFcF
cy/9JPVdcOaI9yQsw0nfVa59NiddlnxWZM8iEbiUWkdG+Y6e6vkvs/iS0GutP39e
XDrCLLyfzK70Pl7PwjNtSvVAQSxIuIB6Y08Q5/ck3tdQYW48Nvf48e5NIhKp/dO1
ulIrtEYp9//pec/VRUAyNBT2JE/suDjHs+C3xeT9BLpzUlJEUq6e0yec8vtkrTiu
S2a9nMpexxTPlu9kH31PecS/seRyHg==
=8IkW
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A disappointingly large set of device specific fixes that have built
up since I've been a bit tardy with sending a pull requests as people
kept sending me new new fixes.
The bcm63xx and lpspi issues could lead to corruption so the fixes are
fairly important for the affected parts, the other issues should all
be relatively minor"
* tag 'spi-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: nxp-fspi: Propagate fwnode in ACPI case as well
spi: tegra114: remove Kconfig dependency on TEGRA20_APB_DMA
spi: amlogic-spifc-a1: Handle devm_pm_runtime_enable() errors
spi: spi-fsl-lpspi: fix watermark truncation caused by type cast
spi: cadence-quadspi: Fix cqspi_probe() error handling for runtime pm
spi: bcm63xx: fix premature CS deassertion on RX-only transactions
spi: spi-cadence-quadspi: Remove duplicate pm_runtime_put_autosuspend() call
spi: spi-cadence-quadspi: Enable pm runtime earlier to avoid imbalance
In addition to generic VFIO PCI functionality, the driver implements
VFIO migration uAPI, allowing userspace to enable migration for Intel
Graphics SR-IOV Virtual Functions.
The driver binds to VF device and uses API exposed by Xe driver to
transfer the VF migration data under the control of PF device.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Link: https://patch.msgid.link/20251127093934.1462188-5-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Device specific VFIO driver variant for Xe will implement VF migration.
Export everything that's needed for migration ops.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-4-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
In certain scenarios (such as VF migration), VF driver needs to interact
with PF driver.
Add a helper to allow VF driver access to PF xe_device.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-3-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
All of the necessary building blocks are now in place to support SR-IOV
VF migration.
Flip the enable/disable logic to match VF code and disable the feature
only for platforms that don't meet the necessary prerequisites.
To allow more testing and experiments, on DEBUG builds any missing
prerequisites will be ignored.
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251127093934.1462188-2-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
A couple of fixes for incorrect device descriptions in the rtq2208
driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkqE5oACgkQJNaLcl1U
h9ByEQf/elFORcnRnri/ZOd+QqtAsO/aUtWeooGtavmayLiQEGESqjs/n0Zjb3fQ
Ajo1eUD2h11C+gEY4GTQr2iRG+/wksT5ogRB9B3TlOJ+MiQDkJsoZ4idv2UTeuqV
zZueCTBV1Kt5oGVMgMC/4atRLNLackr5xqUkl8AZ2+szDK9MTA/VGhDmU5ao6dTd
xgmXbEVGQTvOM8E+jXHEsnnHqyMIbuwXLUoDLVXvoiYww+yMqqvZCMdIqXT8Ue7W
vtc0WZmXAZ8h4EUtD/WxVH0aq5qPJEYHy9lWNPRJs9KPdmxZ1O1eAsqEygTs0+fa
zCdEKwIANV4cvkegX5Blf2qcv4L6Fg==
=/5ra
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes for incorrect device descriptions in the rtq2208
driver"
* tag 'regulator-fix-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rtq2208: Correct LDO2 logic judgment bits
regulator: rtq2208: Correct buck group2 phase mapping logic
Modify the dsp read and write functions of the chip and normalize
the dsp read and write functions of all awinic amplifier
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20251128130323.628091-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove array_size() calls and replace vmalloc() with vmalloc_array() in
ubifs_create_dflt_lpt()/lpt_init_rd()/lpt_init_wr(). vmalloc_array() is
optimized better, resulting in less instructions being used [1].
[1]: https://lore.kernel.org/lkml/abc66ec5-85a4-47e1-9759-2f60ab111971@vivo.com/
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The problem is that scan_fast() allocate memory for ubi->fm
and ubi->fm->e[x], but if the following attach process fails
in ubi_wl_init or ubi_read_volume_table, the whole attach
process will fail without executing ubi_wl_close to free the
memory under ubi->fm.
Fix this by add a new ubi_free_fastmap function in fastmap.c
to free the memory allocated for fm.
If SLUB_DEBUG and KUNIT are enabled, the following warning messages
will show:
ubi0: detaching mtd0
ubi0: mtd0 is detached
ubi0: default fastmap pool size: 200
ubi0: default fastmap WL pool size: 100
ubi0: attaching mtd0
ubi0: attached by fastmap
ubi0: fastmap pool size: 200
ubi0: fastmap WL pool size: 100
ubi0 error: ubi_wl_init [ubi]: no enough physical eraseblocks (4, need 203)
ubi0 error: ubi_attach_mtd_dev [ubi]: failed to attach mtd0, error -28
UBI error: cannot attach mtd0
=================================================================
BUG ubi_wl_entry_slab (Tainted: G B O L ): Objects remaining in ubi_wl_entry_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0xffff2fd23a40cd00 objects=22 used=1 fp=0xffff2fd1d0334fd8 flags=0x883fffc010200(slab|head|section=34|node=0|zone=1|lastcpupid=0x7fff)
CPU: 0 PID: 5884 Comm: insmod Tainted: G B O L 5.10.0 #1
Hardware name: LS1043A RDB Board (DT)
Call trace:
dump_backtrace+0x0/0x198
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
slab_err+0x94/0xc0
__kmem_cache_shutdown+0x1fc/0x39c
kmem_cache_destroy+0x48/0x138
ubi_init+0x1d4/0xf34 [ubi]
do_one_initcall+0xb4/0x24c
do_init_module+0x4c/0x1dc
load_module+0x212c/0x2260
__se_sys_finit_module+0xb4/0xd8
__arm64_sys_finit_module+0x18/0x28
el0_svc_common.constprop.0+0x78/0x1a0
do_el0_svc+0x78/0x90
el0_svc+0x20/0x38
el0_sync_handler+0xf0/0x140
normal+0x3d8/0x400
Object 0xffff2fd1d0334e68 @offset=3688
Allocated in ubi_scan_fastmap+0xf04/0xf40 [ubi] age=80 cpu=0 pid=5884
__slab_alloc.isra.21+0x6c/0xb4
kmem_cache_alloc+0x1e4/0x80c
ubi_scan_fastmap+0xf04/0xf40 [ubi]
ubi_attach+0x1f0/0x3a8 [ubi]
ubi_attach_mtd_dev+0x810/0xbc8 [ubi]
ubi_init+0x238/0xf34 [ubi]
do_one_initcall+0xb4/0x24c
do_init_module+0x4c/0x1dc
load_module+0x212c/0x2260
__se_sys_finit_module+0xb4/0xd8
__arm64_sys_finit_module+0x18/0x28
el0_svc_common.constprop.0+0x78/0x1a0
do_el0_svc+0x78/0x90
el0_svc+0x20/0x38
el0_sync_handler+0xf0/0x140
normal+0x3d8/0x400
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220744
Signed-off-by: Liyuan Pang <pangliyuan1@huawei.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This patch prevents unnecessary programming of bits in ec_hdr and
vid_hdr that are not used or read during normal UBI operation. These
unused bits are typcially already set to 1 in erased flash and do not
need to be explicitly programmed to 0 if they are not used.
Programming such unused areas offers no functional benefit and may
result in unnecessary flash wear, reducing the overall lifetime of the
device. By skipping these writes, we preserve the flash state as much as
possible and minimize wear caused by redundant operations.
This change ensures that only necessary fields are written when preparing
UBI headers, improving flash efficiency without affecting functionality.
Additionally, the Kioxia TC58NVG1S3HTA00 datasheet (page 63) also notes
that continuous program/erase cycling with a high percentage of '0' bits
in the data pattern can accelerate block endurance degradation.
This further supports avoiding large 0x00 patterns.
Link: https://europe.kioxia.com/content/dam/kioxia/newidr/productinfo/datasheet/201910/DST_TC58NVG1S3HTA00-TDE_EN_31442.pdf
Signed-off-by: Cheng Ming Lin <chengminglin@mxic.com.tw>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
-----BEGIN PGP SIGNATURE-----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=uvkM
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251128' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Ensure that vectored registered buffer imports ties the lifetime of
those to the zero-copy send notification, not the parent request
- Fix a bug introduced in this merge window, with the introduction of
mixed sized CQE support
* tag 'io_uring-6.18-20251128' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix mixed cqe overflow handling
io_uring/net: ensure vectored buffer node import is tied to notification
When an error occurs, ubifs_err is used to directly print the error,
and different errors have different formats for printing. Therefore,
it's not necessary to use 'err' to locate the error occurrence.
Thus, remove the relevant assignments to 'err'.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Replace part of the code using ubifs_crc_node.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Because the variable *c is not used within the function,
remove it from the ubifs_crc_node function.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Make both handlers to be shorter and easier to understand.
While at it, unify their style.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251127190031.2998705-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOegAKCRCRxhvAZXjc
olHrAPwICALbFRDg/oj0kOFXEpUP2OrlCeKaZEMoxrKj1gZCUAEAzCATecAvZHZs
ks1d77a0z9qMvQXxISws8ByNPueTMAA=
=GH+q
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- afs: Fix delayed allocation of a cell's anonymous key
The allocation of a cell's anonymous key is done in a background
thread along with other cell setup such as doing a DNS upcall. The
normal key lookup tries to use the key description on the anonymous
authentication key as the reference for request_key() - but it may
not yet be set, causing an oops
- ovl: fail ovl_lock_rename_workdir() if either target is unhashed
As well as checking that the parent hasn't changed after getting the
lock, the code needs to check that the dentry hasn't been unhashed.
Otherwise overlayfs might try to rename something that has been
removed
- namespace: fix a reference leak in grab_requested_mnt_ns
lookup_mnt_ns() already takes a reference on mnt_ns, and so
grab_requested_mnt_ns() doesn't need to take an extra reference
* tag 'vfs-6.18-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Fix delayed allocation of a cell's anonymous key
ovl: fail ovl_lock_rename_workdir() if either target is unhashed
fs/namespace: fix reference leak in grab_requested_mnt_ns
Add a new VFIO selftest for measuring the time it takes to run
vfio_pci_device_init() in parallel for one or more devices.
This test serves as manual regression test for the performance
improvement of commit e908f58b6b ("vfio/pci: Separate SR-IOV VF
dev_set"). For example, when running this test with 64 VFs under the
same PF:
Before:
$ ./vfio_pci_device_init_perf_test -r vfio_pci_device_init_perf_test.iommufd.init 0000:1a:00.0 0000:1a:00.1 ...
...
Wall time: 6.653234463s
Min init time (per device): 0.101215344s
Max init time (per device): 6.652755941s
Avg init time (per device): 3.377609608s
After:
$ ./vfio_pci_device_init_perf_test -r vfio_pci_device_init_perf_test.iommufd.init 0000:1a:00.0 0000:1a:00.1 ...
...
Wall time: 0.122978332s
Min init time (per device): 0.108121915s
Max init time (per device): 0.122762761s
Avg init time (per device): 0.113816748s
This test does not make any assertions about performance, since any such
assertion is likely to be flaky due to system differences and random
noise. However this test can be fed into automation to detect
regressions, and can be used by developers in the future to measure
performance optimizations.
Suggested-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-19-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Eliminate INVALID_IOVA as there are platforms where UINT64_MAX is a
valid iova.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-18-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Split out the contents of libvfio.h into separate header files, but keep
libvfio.h as the top-level include that all tests can use.
Put all new header files into a libvfio/ subdirectory to avoid future
name conflicts in include paths when libvfio is used by other selftests
like KVM.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-17-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move the vfio_selftests_*() helpers into their own file libvfio.c. These
helpers have nothing to do with struct vfio_pci_device, so they don't
make sense in vfio_pci_device.c.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-16-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Rename vfio_util.h to libvfio.h to match the name of libvfio.mk.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-15-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Drop the struct vfio_pci_device wrappers for IOMMU map/unmap functions
and require tests to directly call iommu_map(), iommu_unmap(), etc. This
results in more concise code, and also makes it clear the map operations
are happening on a struct iommu, not necessarily on a specific device,
especially when multi-device tests are introduced.
Do the same for iova_allocator_init() as that function only needs the
struct iommu, not struct vfio_pci_device.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-14-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move the IOVA allocator into its own file, to provide better separation
between the allocator and the struct vfio_pci_device helper code.
The allocator could go into iommu.c, but it is standalone enough that a
separate file seems cleaner. This also continues the trend of having a
.c for every major object in VFIO selftests (vfio_pci_device.c,
vfio_pci_driver.c, iommu.c, and now iova_allocator.c).
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-13-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move all the IOMMU related library code into their own file iommu.c.
This provides a better separation between the vfio_pci_device helper
code and the iommu code.
No function change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-12-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Rename struct vfio_dma_region to dma_region. This is in preparation for
separating the VFIO PCI device library code from the IOMMU library code.
This name change also better reflects the fact that DMA mappings can be
managed by either VFIO or IOMMUFD. i.e. the "vfio_" prefix is
misleading.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-11-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Upgrade various logging in the VFIO selftests drivers from dev_info() to
dev_err(). All of these logs indicate scenarios that may be unexpected.
For example, the logging during probing indicates matching devices but
that aren't supported by the driver. And the memcpy errors can indicate
a problem if the caller was not trying to do something like exercise I/O
fault handling. Exercising I/O fault handling is certainly a valid thing
to do, but the driver can't infer the caller's expectations, so better
to just log with dev_err().
Suggested-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-10-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Prefix log messages with the device's BDF where relevant. This will help
understanding VFIO selftests logs when tests are run with multiple
devices.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-9-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Eliminate overly chatty logs that are printed during almost every test.
These logs are adding more noise than value. If a test cares about this
information it can log it itself. This is especially true as the VFIO
selftests gains support for multiple devices in a single test (which
multiplies all these logs).
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-8-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Support tests that want to add multiple devices to the same
container/iommufd by decoupling struct vfio_pci_device from
struct iommu.
Multi-devices tests can now put multiple devices in the same
container/iommufd like so:
iommu = iommu_init(iommu_mode);
device1 = vfio_pci_device_init(bdf1, iommu);
device2 = vfio_pci_device_init(bdf2, iommu);
device3 = vfio_pci_device_init(bdf3, iommu);
...
vfio_pci_device_cleanup(device3);
vfio_pci_device_cleanup(device2);
vfio_pci_device_cleanup(device1);
iommu_cleanup(iommu);
To account for the new separation of vfio_pci_device and iommu, update
existing tests to initialize and cleanup a struct iommu.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-7-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Introduce struct iommu, which logically represents either a VFIO
container or an iommufd IOAS, depending on which IOMMU mode is used by
the test.
This will be used in a subsequent commit to allow devices to be added to
the same container/iommufd.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-6-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Rename struct vfio_iommu_mode to struct iommu_mode since the mode can
include iommufd. This also prepares for splitting out all the IOMMU code
into its own structs/helpers/files which are independent from the
vfio_pci_device code.
No function change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-5-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Add support for passing multiple device BDFs to a test via the command
line. This is a prerequisite for multi-device tests.
Single-device tests can continue using vfio_selftests_get_bdf(), which
will continue to return argv[argc - 1] (if it is a BDF string), or the
environment variable $VFIO_SELFTESTS_BDF otherwise.
For multi-device tests, a new helper called vfio_selftests_get_bdfs() is
introduced which will return an array of all BDFs found at the end of
argv[], as well as the number of BDFs found (passed back to the caller
via argument). The array of BDFs returned does not need to be freed by
the caller.
The environment variable VFIO_SELFTESTS_BDF continues to support only a
single BDF for the time being.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-4-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Split run.sh into separate scripts (setup.sh, run.sh, cleanup.sh) to
enable multi-device testing, and prepare for VFIO selftests
automatically detecting which devices to use for testing by storing
device metadata on the filesystem.
- setup.sh takes one or more BDFs as arguments and sets up each device.
Metadata about each device is stored on the filesystem in the
directory:
${TMPDIR:-/tmp}/vfio-selftests-devices
Within this directory is a directory for each BDF, and then files in
those directories that cleanup.sh uses to cleanup the device.
- run.sh runs a selftest by passing it the BDFs of all set up devices.
- cleanup.sh takes zero or more BDFs as arguments and cleans up each
device. If no BDFs are provided, it cleans up all devices.
This split enables multi-device testing by allowing multiple BDFs to be
set up and passed into tests:
For example:
$ tools/testing/selftests/vfio/scripts/setup.sh <BDF1> <BDF2>
$ tools/testing/selftests/vfio/scripts/setup.sh <BDF3>
$ tools/testing/selftests/vfio/scripts/run.sh echo
<BDF1> <BDF2> <BDF3>
$ tools/testing/selftests/vfio/scripts/cleanup.sh
In the future, VFIO selftests can automatically detect set up devices by
inspecting ${TMPDIR:-/tmp}/vfio-selftests-devices. This will avoid the
need for the run.sh script.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-3-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move run.sh in a new sub-directory scripts/. This directory will be used
to house various helper scripts to be used by humans and automation for
running VFIO selftests.
Opportunistically also switch run.sh from TEST_PROGS_EXTENDED to
TEST_FILES. The former is for actual test executables that are just not
run by default. TEST_FILES is a better fit for helper scripts.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-2-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
A few last minute fixes came in this week:
- interrupt and gpio numbers in foud separate i.MX8 specific
devicetree files were wrong.
- The vector length property in the C906 CPU description
used the wrong unit.
- Two bugs with uninitialized stack variables in the tee
subsystem.
- Alexander Stein now maintains additional devicetree files.
-----BEGIN PGP SIGNATURE-----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=D1Mu
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes came in this week:
- interrupt and gpio numbers in foud separate i.MX8 specific
devicetree files were wrong
- The vector length property in the C906 CPU description used the
wrong unit
- Two bugs with uninitialized stack variables in the tee subsystem
- Alexander Stein now maintains additional devicetree files"
* tag 'soc-fixes-6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: dts: allwinner: d1: fix vlenb property
MAINTAINERS: Add entry for TQ-Systems AM335 device trees
tee: qcomtee: initialize result before use in release worker
arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
tee: qcomtee: fix uninitialized pointers with free attribute
ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
arm64: dts: imx8dxl: Correct pcie-ep interrupt number
- Fix vfio selftests to remove the expectation that the IOMMU
supports a 64-bit IOVA space. These manifest both in the original
set of tests introduced this development cycle in identity mapping
the IOVA to buffer virtual address space, as well as the more
recent boundary testing. Implement facilities for collecting the
valid IOVA ranges from the backend, implement a simple IOVA
allocator, and use the information for determining extents.
(Alex Mastro)
-----BEGIN PGP SIGNATURE-----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=ywvT
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.18-rc6' into v6.19/vfio/next
Merge mainline vfio-selftest updates for ongoing v6.19 work.
Signed-off-by: Alex Williamson <alex@shazbot.org>
Here are some much-delayed char/misc/iio driver fixes for 6.18-rc8.
Fixes in here include:
- lots of iio driver bugfixes for reported issues.
- counter driver bugfix
- slimbus driver bugfix
- mei tiny bugfix
- nvmem layout uevent bugfix
All of these have been in linux-next for a while, but due to travel on
my side, I haven't had a chance to get them to you.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaSnL1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUpACfaPn4EMLwg1fF60cmYoW0mr0RGg4An1xj6YB3
evzxFzdPf6HwPPkxSOmx
=3lRL
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO fixes from Greg KH:
"Here are some much-delayed char/misc/iio driver fixes for 6.18-rc8.
Fixes in here include:
- lots of iio driver bugfixes for reported issues.
- counter driver bugfix
- slimbus driver bugfix
- mei tiny bugfix
- nvmem layout uevent bugfix
All of these have been in linux-next for a while, but due to travel on
my side, I haven't had a chance to get them to you"
* tag 'char-misc-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
nvmem: layouts: fix nvmem_layout_bus_uevent
iio: accel: bmc150: Fix irq assumption regression
most: usb: fix double free on late probe failure
slimbus: ngd: Fix reference count leak in qcom_slim_ngd_notify_slaves
firmware: stratix10-svc: fix bug in saving controller data
mei: fix error flow in probe
iio: st_lsm6dsx: Fixed calibrated timestamp calculation
iio: humditiy: hdc3020: fix units for thresholds and hysteresis
iio: humditiy: hdc3020: fix units for temperature and humidity measurement
iio: imu: st_lsm6dsx: fix array size for st_lsm6dsx_settings fields
iio: accel: fix ADXL355 startup race condition
iio: adc: ad7124: fix temperature channel
iio:common:ssp_sensors: Fix an error handling path ssp_probe()
iio: adc: ad7280a: fix ad7280_store_balance_timer()
iio: buffer-dmaengine: enable .get_dma_dev()
iio: buffer-dma: support getting the DMA channel
iio: buffer: support getting dma channel from the buffer
iio: pressure: bmp280: correct meas_time_us calculation
iio: adc: stm32-dfsdm: fix st,adc-alt-channel property handling
iio: adc: ad7380: fix SPI offload trigger rate
...
