Test disconnected directories with two test suites
(layout4_disconnected_leafs and layout5_disconnected_branch) and 43
variants to cover the main corner cases.
These tests are complementary to the previous commit.
Add test_renameat() and test_exchangeat() helpers.
Test coverage for security/landlock is 92.1% of 1927 lines according to
LLVM 20.
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-5-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This adds tests for the edge case discussed in [1], with specific ones
for rename and link operations when the operands are through
disconnected paths, as that go through a separate code path in Landlock.
This has resulted in a warning, due to collect_domain_accesses() not
expecting to reach a different root from path->mnt:
# RUN layout1_bind.path_disconnected ...
# OK layout1_bind.path_disconnected
ok 96 layout1_bind.path_disconnected
# RUN layout1_bind.path_disconnected_rename ...
[..] ------------[ cut here ]------------
[..] WARNING: CPU: 3 PID: 385 at security/landlock/fs.c:1065 collect_domain_accesses
[..] ...
[..] RIP: 0010:collect_domain_accesses (security/landlock/fs.c:1065 (discriminator 2) security/landlock/fs.c:1031 (discriminator 2))
[..] current_check_refer_path (security/landlock/fs.c:1205)
[..] ...
[..] hook_path_rename (security/landlock/fs.c:1526)
[..] security_path_rename (security/security.c:2026 (discriminator 1))
[..] do_renameat2 (fs/namei.c:5264)
# OK layout1_bind.path_disconnected_rename
ok 97 layout1_bind.path_disconnected_rename
Move the const char definitions a bit above so that we can use the path
for s4d1 in cleanup code.
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/027d5190-b37a-40a8-84e9-4ccbc352bcdf@maowtm.org [1]
Signed-off-by: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-4-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This is now possible thanks to the disconnected directory fix.
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Disconnected files or directories can appear when they are visible and
opened from a bind mount, but have been renamed or moved from the source
of the bind mount in a way that makes them inaccessible from the mount
point (i.e. out of scope).
Previously, access rights tied to files or directories opened through a
disconnected directory were collected by walking the related hierarchy
down to the root of the filesystem, without taking into account the
mount point because it couldn't be found. This could lead to
inconsistent access results, potential access right widening, and
hard-to-debug renames, especially since such paths cannot be printed.
For a sandboxed task to create a disconnected directory, it needs to
have write access (i.e. FS_MAKE_REG, FS_REMOVE_FILE, and FS_REFER) to
the underlying source of the bind mount, and read access to the related
mount point. Because a sandboxed task cannot acquire more access
rights than those defined by its Landlock domain, this could lead to
inconsistent access rights due to missing permissions that should be
inherited from the mount point hierarchy, while inheriting permissions
from the filesystem hierarchy hidden by this mount point instead.
Landlock now handles files and directories opened from disconnected
directories by taking into account the filesystem hierarchy when the
mount point is not found in the hierarchy walk, and also always taking
into account the mount point from which these disconnected directories
were opened. This ensures that a rename is not allowed if it would
widen access rights [1].
The rationale is that, even if disconnected hierarchies might not be
visible or accessible to a sandboxed task, relying on the collected
access rights from them improves the guarantee that access rights will
not be widened during a rename because of the access right comparison
between the source and the destination (see LANDLOCK_ACCESS_FS_REFER).
It may look like this would grant more access on disconnected files and
directories, but the security policies are always enforced for all the
evaluated hierarchies. This new behavior should be less surprising to
users and safer from an access control perspective.
Remove a wrong WARN_ON_ONCE() canary in collect_domain_accesses() and
fix the related comment.
Because opened files have their access rights stored in the related file
security properties, there is no impact for disconnected or unlinked
files.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Reported-by: Tingmao Wang <m@maowtm.org>
Closes: https://lore.kernel.org/r/027d5190-b37a-40a8-84e9-4ccbc352bcdf@maowtm.org
Closes: https://lore.kernel.org/r/09b24128f86973a6022e6aa8338945fcfb9a33e4.1749925391.git.m@maowtm.org
Fixes: b91c3e4ea7 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Fixes: cb2c7d1a17 ("landlock: Support filesystem access-control")
Link: https://lore.kernel.org/r/b0f46246-f2c5-42ca-93ce-0d629702a987@maowtm.org [1]
Reviewed-by: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Here are 2 serial driver fixes for reported issues for 6.18-rc8.
These are:
- fix for a much reported symbol build loop that broke the build for
some kernel configurations.
- amba-pl011 driver bugfix for a reported issue
Both have been in linux next (the last for weeks, the first for a
shorter amount of time), with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaSnMaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymg5QCfeiPTQKjBjgltevx4QCaxVMyoo54AmwTVgjub
iXAdo7xLL3tvpG1ubqgt
=y3e3
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two serial driver fixes for reported issues for 6.18-rc8.
These are:
- fix for a much reported symbol build loop that broke the build for
some kernel configurations
- amba-pl011 driver bugfix for a reported issue
Both have been in linux next (the last for weeks, the first for a
shorter amount of time), with no reported issues"
* tag 'tty-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix 8250_rsa symbol loop
serial: amba-pl011: prefer dma_mapping_error() over explicit address checking
Here are some last-minutes USB and Thunderbolt driver fixes and new
device ids for 6.18-rc8. Included in here are:
- usb storage quirk fixup
- xhci driver fixes for reported issues
- usb gadget driver fixes
- dwc3 driver fixes
- UAS driver fixup
- thunderbolt new device ids
- usb-serial driver new ids
All of these have been in linux-next with no reported issues, many for
many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaSnO0w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqyACgvNvTnpfj8lx0L9aESj6Hra0UZ20AoKlYRFW1
gAVcF4Wafnu7ehjAITXL
=cH0/
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some last-minutes USB and Thunderbolt driver fixes and new
device ids for 6.18-rc8. Included in here are:
- usb storage quirk fixup
- xhci driver fixes for reported issues
- usb gadget driver fixes
- dwc3 driver fixes
- UAS driver fixup
- thunderbolt new device ids
- usb-serial driver new ids
All of these have been in linux-next with no reported issues, many for
many weeks"
* tag 'usb-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: gadget: renesas_usbf: Handle devm_pm_runtime_enable() errors
USB: storage: Remove subclass and protocol overrides from Novatek quirk
usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer
usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths
xhci: dbgtty: fix device unregister
usb: storage: sddr55: Reject out-of-bound new_pba
USB: serial: option: add support for Rolling RW101R-GL
usb: typec: ucsi: psy: Set max current to zero when disconnected
usb: gadget: f_eem: Fix memory leak in eem_unwrap
usb: dwc3: pci: Sort out the Intel device IDs
usb: dwc3: pci: add support for the Intel Nova Lake -S
drivers/usb/dwc3: fix PCI parent check
usb: storage: Fix memory leak in USB bulk transport
xhci: sideband: Fix race condition in sideband unregister
xhci: dbgtty: Fix data corruption when transmitting data form DbC to host
xhci: fix stale flag preventig URBs after link state error is cleared
USB: serial: ftdi_sio: add support for u-blox EVK-M101
usb: cdns3: Fix double resource release in cdns3_pci_probe
usb: gadget: udc: fix use-after-free in usb_gadget_state_work
usb: renesas_usbhs: Fix synchronous external abort on unbind
...
Speculative prefetches from CPU to GPU memory until the GPU is
ready after reset can cause harmless corrected RAS events to
be logged on Grace systems. It is thus preferred that the
mapping not be re-established until the GPU is ready post reset.
The GPU readiness can be checked through BAR0 registers similar
to the checking at the time of device probe.
It can take several seconds for the GPU to be ready. So it is
desirable that the time overlaps as much of the VM startup as
possible to reduce impact on the VM bootup time. The GPU
readiness state is thus checked on the first fault/huge_fault
request or read/write access which amortizes the GPU readiness
time.
The first fault and read/write checks the GPU state when the
reset_done flag - which denotes whether the GPU has just been
reset. The memory_lock is taken across map/access to avoid
races with GPU reset.
Also check if the memory is enabled, before waiting for GPU
to be ready. Otherwise the readiness check would block for 30s.
Lastly added PM handling wrapping on read/write access.
Cc: Shameer Kolothum <skolothumtho@nvidia.com>
Cc: Alex Williamson <alex@shazbot.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Vikram Sethi <vsethi@nvidia.com>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-7-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Introduce a new flag reset_done to notify that the GPU has just
been reset and the mapping to the GPU memory is zapped.
Implement the reset_done handler to set this new variable. It
will be used later in the patches to wait for the GPU memory
to be ready before doing any mapping or access.
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-6-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Split the function that check for the GPU device being ready on
the probe.
Move the code to wait for the GPU to be ready through BAR0 register
reads to a separate function. This would help reuse the code.
This also fixes a bug where the return status in case of timeout
gets overridden by return from pci_enable_device. With the fix,
a timeout generate an error as initially intended.
Fixes: d85f69d520 ("vfio/nvgrace-gpu: Check the HBM training and C2C link status")
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-5-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Remove code duplication in vfio_pci_core_mmap by calling
vfio_pci_core_setup_barmap to perform the bar mapping.
No functional change is intended.
Cc: Donald Dutile <ddutile@redhat.com>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-4-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
NVIDIA's Grace based systems have large device memory. The device
memory is mapped as VM_PFNMAP in the VMM VMA. The nvgrace-gpu
module could make use of the huge PFNMAP support added in mm [1].
To make use of the huge pfnmap support, fault/huge_fault ops
based mapping mechanism needs to be implemented. Currently nvgrace-gpu
module relies on remap_pfn_range to do the mapping during VM bootup.
Replace it to instead rely on fault and use vfio_pci_vmf_insert_pfn
to setup the mapping.
Moreover to enable huge pfnmap, nvgrace-gpu module is updated by
adding huge_fault ops implementation. The implementation establishes
mapping according to the order request. Note that if the PFN or the
VMA address is unaligned to the order, the mapping fallbacks to
the PTE level.
Link: https://lore.kernel.org/all/20240826204353.2228736-1-peterx@redhat.com/ [1]
Cc: Shameer Kolothum <skolothumtho@nvidia.com>
Cc: Alex Williamson <alex@shazbot.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Vikram Sethi <vsethi@nvidia.com>
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-3-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Refactor vfio_pci_mmap_huge_fault to take out the implementation
to map the VMA to the PTE/PMD/PUD as a separate function.
Export the new function to be used by nvgrace-gpu module.
Move the alignment check code to verify that pfn and VMA VA is
aligned to the page order to the header file and make it inline.
No functional change is intended.
Cc: Shameer Kolothum <skolothumtho@nvidia.com>
Cc: Alex Williamson <alex@shazbot.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20251127170632.3477-2-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
fill_sg_entry() splits large DMA buffers into multiple scatter-gather
entries, each holding up to UINT_MAX bytes. When calculating the DMA
address for entries beyond the second one, the expression (i * UINT_MAX)
causes integer overflow due to 32-bit arithmetic.
This manifests when the input arg length >= 8 GiB results in looping for
i >= 2.
Fix by casting i to dma_addr_t before multiplication.
Fixes: 3aa31a8bb1 ("dma-buf: provide phys_vec to scatter-gather mapping routine")
Signed-off-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Link: https://lore.kernel.org/r/20251125-dma-buf-overflow-v1-1-b70ea1e6c4ba@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Thanks to a device generating an ACS violation during bus reset,
lockdep reported the following circular locking issue:
CPU0: SET_IRQS (MSI/X): holds igate, acquires memory_lock
CPU1: HOT_RESET: holds memory_lock, acquires pci_bus_sem
CPU2: AER: holds pci_bus_sem, acquires igate
This results in a potential 3-way deadlock.
Remove the pci_bus_sem->igate leg of the triangle by using RCU
to peek at the eventfd rather than locking it with igate.
Fixes: 3be3a074cf ("vfio-pci: Don't use device_lock around AER interrupt setup")
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20251124223623.2770706-1-alex@shazbot.org
Signed-off-by: Alex Williamson <alex@shazbot.org>
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
-----BEGIN PGP SIGNATURE-----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=OqKr
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.18
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
* tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: fix vlenb property
In max16065_current_show, data->curr_sense is read twice: once for the
error check and again for the calculation. Since
i2c_smbus_read_byte_data returns negative error codes on failure, if the
data changes to an error code between the check and the use, ADC_TO_CURR
results in an incorrect calculation.
Read data->curr_sense into a local variable to ensure consistency. Note
that data->curr_gain is constant and safe to access directly.
This aligns max16065_current_show with max16065_input_show, which
already uses a local variable for the same reason.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251128124709.3876-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macros FAN_FROM_REG and TEMP_FROM_REG evaluate their arguments
multiple times. When used in lockless contexts involving shared driver
data, this causes Time-of-Check to Time-of-Use (TOCTOU) race
conditions.
Convert the macros to static functions. This guarantees that arguments
are evaluated only once (pass-by-value), preventing the race
conditions.
Adhere to the principle of minimal changes by only converting macros
that evaluate arguments multiple times and are used in lockless
contexts.
Link: https://lore.kernel.org/all/CALbr=LYJ_ehtp53HXEVkSpYoub+XYSTU8Rg=o1xxMJ8=5z8B-g@mail.gmail.com/
Fixes: 85f03bccd6 ("hwmon: Add support for Winbond W83L786NG/NR")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20251128123816.3670-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Modify kernel-doc comments in sbitmap.h to prevent warnings:
Warning: include/linux/sbitmap.h:84 struct member 'alloc_hint' not
described in 'sbitmap'
Warning: include/linux/sbitmap.h:151 struct member 'ws_active' not
described in 'sbitmap_queue'
Warning: include/linux/sbitmap.h:552 No description found for
return value of 'sbq_wait_ptr'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add helper __ublk_fetch() for refactoring ublk_fetch().
Meantime move ublk_config_io_buf() out of __ublk_fetch() to make
the code structure cleaner.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass const pointer to ublk_queue_is_zoned() because it is readonly.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor auto buffer register code and prepare for supporting batch IO
feature, and the main motivation is to put 'ublk_io' operation code
together, so that per-io lock can be applied for the code block.
The key changes are:
- Rename ublk_auto_buf_reg() as ublk_do_auto_buf_reg()
- Introduce an enum `auto_buf_reg_res` to represent the result of
the buffer registration attempt (FAIL, FALLBACK, OK).
- Split the existing `ublk_do_auto_buf_reg` function into two:
- `__ublk_do_auto_buf_reg`: Performs the actual buffer registration
and returns the `auto_buf_reg_res` status.
- `ublk_do_auto_buf_reg`: A wrapper that calls the internal function
and handles the I/O preparation based on the result.
- Introduce `ublk_prep_auto_buf_reg_io` to encapsulate the logic for
preparing the I/O for completion after buffer registration.
- Pass the `tag` directly to `ublk_auto_buf_reg_fallback` to avoid
recalculating it.
This refactoring makes the control flow clearer and isolates the different
stages of the auto buffer registration process.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add `union ublk_io_buf` for naming the anonymous union of struct ublk_io's
addr and buf fields, meantime apply it to `struct ublk_io` for storing either
ublk auto buffer register data or ublk server io buffer address.
The union uses clear field names:
- `addr`: for regular ublk server io buffer addresses
- `auto_reg`: for ublk auto buffer registration data
This eliminates confusing access patterns and improves code readability.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg() and
prepare for reusing this helper for the coming UBLK_BATCH_IO feature,
which can fetch & commit one batch of io commands via single uring_cmd.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add __kfifo_alloc_node() by refactoring and reusing __kfifo_alloc(),
and define kfifo_alloc_node() macro to support NUMA-aware memory
allocation.
The new __kfifo_alloc_node() function accepts a NUMA node parameter
and uses kmalloc_array_node() instead of kmalloc_array() for
node-specific allocation. The existing __kfifo_alloc() now calls
__kfifo_alloc_node() with NUMA_NO_NODE to maintain backward
compatibility.
This enables users to allocate kfifo buffers on specific NUMA nodes,
which is important for performance in NUMA systems where the kfifo
will be primarily accessed by threads running on specific nodes.
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Discovered by Atuin - Automated Vulnerability Discovery Engine.
In ac_ioctl, the validation of IndexCard and the check for a valid
RamIO pointer are skipped when cmd is 6. However, the function
unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the
end.
If cmd is 6, IndexCard may reference a board that does not exist
(where RamIO is NULL), leading to a NULL pointer dereference.
Fix this by skipping the readb access when cmd is 6, as this
command is a global information query and does not target a specific
board context.
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251128155323.a786fde92ebb926cbe96fcb1@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is just apply Kuai's patch in [1] with mirror changes.
blk_mq_realloc_hw_ctxs() will free the 'queue_hw_ctx'(e.g. undate
submit_queues through configfs for null_blk), while it might still be
used from other context(e.g. switch elevator to none):
t1 t2
elevator_switch
blk_mq_unquiesce_queue
blk_mq_run_hw_queues
queue_for_each_hw_ctx
// assembly code for hctx = (q)->queue_hw_ctx[i]
mov 0x48(%rbp),%rdx -> read old queue_hw_ctx
__blk_mq_update_nr_hw_queues
blk_mq_realloc_hw_ctxs
hctxs = q->queue_hw_ctx
q->queue_hw_ctx = new_hctxs
kfree(hctxs)
movslq %ebx,%rax
mov (%rdx,%rax,8),%rdi ->uaf
This problem was found by code review, and I comfirmed that the concurrent
scenario do exist(specifically 'q->queue_hw_ctx' can be changed during
blk_mq_run_hw_queues()), however, the uaf problem hasn't been repoduced yet
without hacking the kernel.
Sicne the queue is freezed in __blk_mq_update_nr_hw_queues(), fix the
problem by protecting 'queue_hw_ctx' through rcu where it can be accessed
without grabbing 'q_usage_counter'.
[1] https://lore.kernel.org/all/20220225072053.2472431-1-yukuai3@huawei.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit 4e5cc99e1e ("blk-mq: manage hctx map via xarray"), we use
an xarray instead of array to store hctx, but in poll mode, each time
in blk_mq_poll, we need use xa_load to find corresponding hctx, this
introduce some costs. In my test, xa_load may cost 3.8% cpu.
This patch revert previous change, eliminates the overhead of xa_load
and can result in a 3% performance improvement.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During some IGT tests (e.g. xe_pm@s2idle-exec-after, xe_pm@s2idle-mocs)
sink disconnects across suspend/resume, reconnecting later during resume
at some point. Hence during resume, where the driver is restoring the
pre-suspend mode, all the AUX transfers to the sink are expected to
fail.
Switch error message to KMS debug message of failed FEC enabling.
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251117082046.4190705-1-michal.grzelak@intel.com
Merge PM QoS updates and a cpupower utility update for 6.19-rc1:
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
* pm-qos:
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
* pm-tools:
tools/power/cpupower: Support building libcpupower statically
* for-next/set_memory:
: Fix + documentation for the arm64 change_memory_common()
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
* for-next/sysreg:
: arm64 sysreg updates/cleanups
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64/sysreg: Add ICH_VMCR_EL2
arm64/sysreg: Move generation of RES0/RES1/UNKN to function
arm64/sysreg: Support feature-specific fields with 'Prefix' descriptor
arm64/sysreg: Fix checks for incomplete sysreg definitions
arm64/sysreg: Replace TCR_EL1 field macros
The purpose of the devm_add_action_or_reset() helper is to call the
action function in case adding an action ever fails so drop the clock
disable from the error path to avoid disabling the clocks twice.
Fixes: 5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Cc: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
* arm64/for-next/perf:
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY
perf/arm-ni: Fix and optimise register offset calculation
perf: arm_pmuv3: Add new Cortex and C1 CPU PMUs
perf: arm_cspmu: fix error handling in arm_cspmu_impl_unregister()
perf/arm-ni: Add NoC S3 support
perf/arm_cspmu: nvidia: Add pmevfiltr2 support
perf/arm_cspmu: nvidia: Add revision id matching
perf/arm_cspmu: Add pmpidr support
perf/arm_cspmu: Add callback to reset filter config
perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores
* for-next/misc:
: Miscellaneous patches
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
arm64: mm: make linear mapping permission update more robust for patial range
arm64/mm: Elide TLB flush in certain pte protection transitions
arm64/mm: Rename try_pgd_pgtable_alloc_init_mm
arm64/mm: Allow __create_pgd_mapping() to propagate pgtable_alloc() errors
arm64: add unlikely hint to MTE async fault check in el0_svc_common
arm64: acpi: add newline to deferred APEI warning
arm64: entry: Clean out some indirection
arm64/mm: Ensure PGD_SIZE is aligned to 64 bytes when PA_BITS = 52
arm64/mm: Drop cpu_set_[default|idmap]_tcr_t0sz()
arm64: remove unused ARCH_PFN_OFFSET
arm64: use SOFTIRQ_ON_OWN_STACK for enabling softirq stack
arm64: Remove assertion on CONFIG_VMAP_STACK
* for-next/kselftest:
: arm64 kselftest patches
kselftest/arm64: Align zt-test register dumps
* for-next/efi-preempt:
: arm64: Make EFI calls preemptible
arm64/efi: Call EFI runtime services without disabling preemption
arm64/efi: Move uaccess en/disable out of efi_set_pgd()
arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper
arm64/fpsimd: Permit kernel mode NEON with IRQs off
arm64/fpsimd: Don't warn when EFI execution context is preemptible
efi/runtime-wrappers: Keep track of the efi_runtime_lock owner
efi: Add missing static initializer for efi_mm::cpus_allowed_lock
* for-next/assembler-macro:
: arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
* for-next/typos:
: Random typo/spelling fixes
arm64: Fix double word in comments
arm64: Fix typos and spelling errors in comments
* for-next/sme-ptrace-disable:
: Support disabling streaming mode via ptrace on SME only systems
kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace
kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
* for-next/local-tlbi-page-reused:
: arm64, mm: avoid TLBI broadcast if page reused in write fault
arm64, tlbflush: don't TLBI broadcast if page reused in write fault
mm: add spurious fault fixing support for huge pmd
* for-next/mpam: (34 commits)
: Basic Arm MPAM driver (more to follow)
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
arm_mpam: Use long MBWU counters if supported
arm_mpam: Probe for long/lwd mbwu counters
arm_mpam: Consider overflow in bandwidth counter state
arm_mpam: Track bandwidth counter state for power management
arm_mpam: Add mpam_msmon_read() to read monitor value
arm_mpam: Add helpers to allocate monitors
arm_mpam: Probe and reset the rest of the features
arm_mpam: Allow configuration to be applied and restored during cpu online
arm_mpam: Use a static key to indicate when mpam is enabled
arm_mpam: Register and enable IRQs
arm_mpam: Extend reset logic to allow devices to be reset any time
arm_mpam: Add a helper to touch an MSC from any CPU
arm_mpam: Reset MSC controls from cpuhp callbacks
arm_mpam: Merge supported features during mpam_enable() into mpam_class
arm_mpam: Probe the hardware features resctrl supports
arm_mpam: Add helpers for managing the locking around the mon_sel registers
...
* for-next/acpi:
: arm64 acpi updates
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
* for-next/documentation:
: arm64 Documentation updates
Documentation/arm64: Fix the typo of register names
Merge energy model management updates and operating performance points
(OPP) library changes for 6.19-rc1:
- Add support for sending netlink notifications to user space on energy
model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
* pm-em:
PM: EM: Add to em_pd_list only when no failure
PM: EM: Notify an event when the performance domain changes
PM: EM: Implement em_notify_pd_created/updated()
PM: EM: Implement em_notify_pd_deleted()
PM: EM: Implement em_nl_get_pd_table_doit()
PM: EM: Implement em_nl_get_pds_doit()
PM: EM: Add an iterator and accessor for the performance domain
PM: EM: Add a skeleton code for netlink notification
PM: EM: Add em.yaml and autogen files
PM: EM: Expose the ID of a performance domain via debugfs
PM: EM: Assign a unique ID when creating a performance domain
* pm-opp:
rust: opp: simplify callers of `to_c_str_array`
OPP: Initialize scope-based pointers inline
rust: opp: fix broken rustdoc link
Consider the following code path:
(1) vmalloc -> (2) set_vm_flush_reset_perms -> (3) set_memory_ro/set_memory_rox
-> .... (4) use the mapping .... -> (5) vfree -> (6) vm_reset_perms
-> (7) set_area_direct_map.
Or, it may happen that we encounter failure at (3) and directly jump to (5).
In both cases, (7) may fail due to linear map split failure. But, we care
about its success *only* for the region which got successfully changed by
(3). Such a region is guaranteed to be pte-mapped.
The TLDR is that (7) will surely succeed for the regions we care about.
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The rodata=on security measure requires that any code path which does
vmalloc -> set_memory_ro/set_memory_rox must protect the linear map alias
too. Therefore, if such a call fails, we must abort set_memory_* and caller
must take appropriate action; currently we are suppressing the error, and
there is a real chance of such an error arising post commit a166563e7e
("arm64: mm: support large block mapping when rodata=full"). Therefore,
propagate any error to the caller.
Fixes: a166563e7e ("arm64: mm: support large block mapping when rodata=full")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The error status mask for a type 3/4 subspace is used for reading the
error status, and the bitwise inverse is used for clearing the error
with the intent being to preserve any of the non-error bits. However,
we were previously applying the mask to extract the status and then
applying the inverse to the result which ended up clearing all bits.
Instead, store the inverse mask in the preserve mask and then use that
on the original value read from the error status so that only the error
is cleared.
Fixes: c45ded7e11 ("mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)")
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
mtk_gpueb_mbox_ops should be declared static. However, due to its const
nature, this specifier was missed, as it compiled fine without it and
with no warning by the compiler.
arc-linux-gcc (GCC) 12.5.0 doesn't seem to like it however, so add the
static to fix that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510100629.3nGvrhEU-lkp@intel.com/
Fixes: dbca0eabb8 ("mailbox: add MediaTek GPUEB IPI mailbox")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
GCE can only fetch the command buffer address from a 32-bit register.
Some SoCs support a 35-bit command buffer address for GCE, which
requires a right shift of 3 bits before setting the address into
the 32-bit register. A comment has been added to the header of
cmdq_get_shift_pa() to explain this requirement.
To prevent the GCE command buffer address from being DMA mapped beyond
its supported bit range, the DMA bit mask for the device is set during
initialization.
Additionally, to ensure the correct shift is applied when setting or
reading the register that stores the GCE command buffer address,
new APIs, cmdq_convert_gce_addr() and cmdq_revert_gce_addr(), have
been introduced for consistent operations on this register.
The variable type for the command buffer address has been standardized
to dma_addr_t to prevent handling issues caused by type mismatches.
Fixes: 0858fde496 ("mailbox: cmdq: variablize address shift in platform")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The debugfs_create_dir() function returns ERR_PTR() on error, not NULL.
The current null-check fails to catch errors.
Use IS_ERR() to correctly check for errors.
Fixes: 8ea4484d0c ("mailbox: Add generic mechanism for testing Mailbox Controllers")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
On TI K3 devices, the mailbox resides in the Always-On power domain
(LPSC_main_alwayson) and is shared among multiple processors. The
mailbox is not solely exclusive to Linux.
Currently, the suspend path checks all FIFO queues for pending messages
and blocks suspend if any are present. This behavior is unnecessary for
K3 devices, since some of the FIFOs are used for RTOS<->RTOS
communication and are independent of Linux.
For FIFOs used in Linux<->RTOS communication, any pending message would
trigger an interrupt, which naturally prevents suspend from completing.
Hence, there is no need for the mailbox driver to explicitly check for
pending messages on K3 platforms.
Introduce a device match flag to indicate whether the mailbox instance
is exclusive to Linux, and skip the pending message check for
non-exclusive instances (such as in K3).
Fixes: a49f991e74 ("arm64: dts: ti: k3-am62-verdin: Add missing cfg for TI IPC Firmware")
Closes: https://lore.kernel.org/all/sid7gtg5vay5qgicsl6smnzwg5mnneoa35cempt5ddwjvedaio@hzsgcx6oo74l/
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Merge cpuidle and power capping updates for 6.19-rc1:
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the cpufreq
core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up muliple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat Lake
processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
* pm-cpuidle:
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
cpuidle: governors: teo: Add missing space to the description
cpuidle: governors: teo: Simplify intercepts-based state lookup
cpuidle: governors: teo: Fix tick_intercepts handling in teo_update()
cpuidle: governors: teo: Rework the handling of tick wakeups
cpuidle: governors: teo: Decay metrics below DECAY_SHIFT threshold
cpuidle: governors: teo: Use s64 consistently in teo_update()
cpuidle: governors: teo: Drop redundant function parameter
cpuidle: governors: teo: Drop misguided target residency check
cpuidle: teo: Use this_cpu_ptr() where possible
cpuidle: Add sanity check for exit latency and target residency
cpuidle: menu: Use residency threshold in polling state override decisions
* pm-powercap:
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
powercap: intel_rapl: Add support for Nova Lake processors
powercap: intel_rapl: Add support for Wildcat Lake platform
Currently the user can write anything into the drm.panic_screen modparam,
either at runtime via sysfs, or as a kernel boot time argument. Invalid
strings will be silently accepted and ignored at use time by defaulting to
the 'user' panic mode.
Let instead add some validation in order to have immediate feedback when
something has been mistyped, or not compiled in.
For example during kernel boot:
Booting kernel: `bsod' invalid for parameter `drm.panic_screen'
Or at runtime:
# echo -n bsod > /sys/module/drm/parameters/panic_screen
-bash: echo: write error: Invalid argument
Change of behavior is that when invalid mode is attempted to be
configured, currently the code will default to the 'user' mode, while with
this change the code will ignore it, and default to the mode set at kernel
build time via CONFIG_DRM_PANIC_SCREEN.
While at it lets also fix the module parameter description to include all
compiled in modes.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251127090349.92717-1-tvrtko.ursulin@igalia.com
Merge cpufreq updates for 6.19-rc1:
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate cpufreq
driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking in
it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi, Hal
Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
* pm-cpufreq: (27 commits)
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
cpufreq: ACPI: Replace udelay() with usleep_range()
cpufreq: intel_pstate: Eliminate some code duplication
cpufreq: intel_pstate: Use mutex guard for driver locking
cpufreq/amd-pstate: Call cppc_set_auto_sel() only for online CPUs
cpufreq/amd-pstate: Add static asserts for EPP indices
cpufreq/amd-pstate: Fix some whitespace issues
cpufreq/amd-pstate: Adjust return values in amd_pstate_update_status()
cpufreq/amd-pstate: Make amd_pstate_get_mode_string() never return NULL
cpufreq/amd-pstate: Drop NULL value from amd_pstate_mode_string
cpufreq/amd-pstate: Use sysfs_match_string() for epp
cpufreq: tegra194: add WQ_PERCPU to alloc_workqueue users
cpufreq: qcom-nvmem: add compatible fallback for ipq806x for no SMEM
Documentation: intel-pstate: Use :ref: directive for internal linking
cpufreq: intel_pstate: Add Diamond Rapids OOB mode support
Documentation: intel_pstate: fix duplicate hyperlink target errors
cpufreq: CPPC: Don't warn if FIE init fails to read counters
cpufreq: nforce2: fix reference count leak in nforce2
cpufreq: tegra186: add OPP support and set bandwidth
cpufreq: dt-platdev: Add JH7110S SOC to the allowlist
...
Merge updates related to system suspend and hibernation for 6.19-rc1:
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
* pm-sleep: (21 commits)
PM: hibernate: Extra cleanup of comments in swap handling code
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
PM: hibernate: Clean up kernel-doc comment style usage
PM: suspend: Make pm_test delay interruptible by wakeup events
usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks
scsi: Add PM_EVENT_POWEROFF into suspend callbacks
PM: Introduce new PMSG_POWEROFF event
PM: wakeup: Update after recent wakeup source removal ordering change
PM: wakeup: Delete timer before removing wakeup source from list
Documentation: power: Correct a mistaken configuration option
Documentation: power: Add document on debugging shutdown hangs
freezer: Clarify that only cgroup1 freezer uses PM freezer
PM: hibernate: add sysfs interface for hibernate_compression_threads
PM: hibernate: make compression threads configurable
PM: hibernate: dynamically allocate crc->unc_len/unc for configurable threads
PM: hibernate: Rework message printing in swsusp_save()
PM: dpm_watchdog: add module param to backtrace all CPUs
PM: sleep: Introduce CALL_PM_OP() macro to simplify code
PM: console: Fix memory allocation error handling in pm_vt_switch_required()
...
Merge a core power management update and runtime PM framework updates
for 6.19-rc1:
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
* pm-core:
PM: WQ_UNBOUND added to pm_wq workqueue
* pm-runtime:
PCI/sysfs: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
ACPI: TAD: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
PM: runtime: Wrapper macros for ACQUIRE()/ACQUIRE_ERR()
PM: runtime: fix typos in runtime.c comments
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
PM: runtime: docs: Update pm_runtime_allow/forbid() documentation
